How to setup keyboard? - Touch Diamond, MDA Compact IV General

I really don't understand because of all the screen shots I have seen but today I got my diamond and I only have the double keyed keybord ,but I want the full,usally in the screens shots there is a boten that you press and it changes the keybord.But i don't have it,so I went to settings keyboard and tried changing it to full qwerty,but no luck,can anyone help?

There should be a triangular looking icon next to the keyboard icon when you are in texting/email/document/etc mode. You click that icon, then a list pops up for you to select the input method.
I'd like to think that you've looked through the included instruction manual...

Thanks man,a minute after a posted this thread a have read the manual ,so Im embarrassed to say sorry for posting this

same problem...
http://forum.xda-developers.com/showthread.php?t=409549
i'm not able to click on that small icon. I used to be able to !!!
i click the icon, it just brings up the "keyboard", no list to select from (like it used to).
can anyone help?
BR
Darrell

darrelluk said:
http://forum.xda-developers.com/showthread.php?t=409549
i'm not able to click on that small icon. I used to be able to !!!
i click the icon, it just brings up the "keyboard", no list to select from (like it used to).
can anyone help?
BR
Darrell
Click to expand...
Click to collapse
Might not work.. but just a suggestion, try it out if you have the time.
Recalibrate the screen.
Start - Settings - System
Screen
It's a long shot.. but hey.. you never know what might work.

tried that...
Hi LordRaj...
I tried that, but still no luck...
If I go to Start > Settings > Input, then I can see the list of keyboards. No matter which one I select it *always* puts it back to "keyboard".
not sure why, i'm using standard ROM that came with the phone.
help!
BR
Darrell

darrelluk said:
Hi LordRaj...
I tried that, but still no luck...
If I go to Start > Settings > Input, then I can see the list of keyboards. No matter which one I select it *always* puts it back to "keyboard".
not sure why, i'm using standard ROM that came with the phone.
help!
BR
Darrell
Click to expand...
Click to collapse
I have the same problem and there's another thread on this subject. There seems to be a few people now with this but no solution yet. If you look on the other thread, there is a utility called SIPChange which will allow you to make sure you get the "right" keyboard you want as default but in terms of selecting from the little arrow, forget it (until someone can work out which registry entries are causing this).
Gary.

...
Hi Gary,
Thanks for the reply...
I have been trying to figure it out all day...

Hi Gents, did anyone get this to work, I have also tried sipchange with the same results, it won't stick to any other keyboard other than diamond or builtin

iggy said:
Hi Gents, did anyone get this to work, I have also tried sipchange with the same results, it won't stick to any other keyboard other than diamond or builtin
Click to expand...
Click to collapse
when you say it won't stick, do you mean it changes back after a soft reset? I had that trouble with my current ROM but sipchange fixed it. try increasing the loading delay in sipchange.
I use TouchPal now which sets itself as default just fine - and I can't imagine needing any other keyboard again!

Davey101 said:
when you say it won't stick, do you mean it changes back after a soft reset? I had that trouble with my current ROM but sipchange fixed it. try increasing the loading delay in sipchange.
I use TouchPal now which sets itself as default just fine - and I can't imagine needing any other keyboard again!
Click to expand...
Click to collapse
Thanks Davey101, tried the default 10secs, then 20secs and it did not work, after your advice I switched to 30sec and softReset, then 40sec the same affect.
Then I remembered in my Apache their was always a sipchange shortcut in Startup and when I checked the Diamond their was none, so I created one with the Set parm as my Apache, softreset and I am good to go.

Related

S2U2 and Voice Dialer

I can't use voice dialer when S2U2 locks phone, is there a way around this? I like the S2U2 application, but when I am driving and need to make a phone call via bluetooth handfree I can't, because s2u2 block the voice dialer.
I did look for a solutions via the search engine and in the s2u2 thread, but no luck thus far.
which device?
which ROM?
which voice dial app?
smittyofdhs said:
which device?
which ROM?
which voice dial app?
Click to expand...
Click to collapse
Thanks for your response,
HTC 8925 (Tilt)
Dutty's Touch AT&t beta 2
Cyberon Voice Speed Dial V1.2 build 070626
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
did you turn on the directdraw option or safe mode option?
When you uninstall an app, it leaves behind the registry entries. As soon as you reinstall the app, those settings are in affecct again. Uninstall the app, use a registry editor to remove the following key, soft reset, then try to reinstall:
The key to remove is HKCU\Software\A_C
Ok, I had the exact same problem, the problem is indeed with D3D option, you need to disable it. As soon as it is off and the settings are saved, the program works fine once again, and smoother then previous version.
This part is gonna be hard to explain... but here it goes...
First thing to do is run ilock so that when u turn the screen off it doesn't start S2U2.
When you open the settings the screen freezes, like the kaiser crashed, but if you move down and you turn the screen off and on, you'll see the menu scrolled down.
Basically that means u're working blind, changes do occur but u can't see, so the process is to move it down, turning the screen off and on sistematically until u see the d3d option and turn it off, then save it.
Hope I explained myself enough.
Takes some work, but doesn't require registry tweaking and other settings are kept.
Keep posted on results.
Cheers, Esko
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
Thank you both for your fast and details replies!!!
It was indeed the direstdraw option. It was easier for me to try eskostar's method, especially since i had tried the same blind procedure but i did not figure the trick with running the ilock first!!!
Everything worked out great!!! Now i can use this excellent program again!!!
Thank you again!!!
Cheers, Nikos
I have this problem. When I start S2U2 and miss call screen remains as it is when someone call (caller's number and slide to answer or two buttons with green and red phone). Whatever I push or click nothing happens. So I must softreset or turn off and on my Kaiser. Some tips?
Sorry I dont have that issue. However my problem with this version of S2U2 is when SLide to Answer is Active you can still use the Hardware Keys to answer!
Anyone no how to deactivate the Hardware keys during Slide to Answer?
MM
bersca said:
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Click to expand...
Click to collapse
Thank you for your response, I will try this when I get back from vacation.
Sempai32 said:
Thank you for your response, I will try this when I get back from vacation.
Click to expand...
Click to collapse
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
LDJ said:
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
Click to expand...
Click to collapse
yeah it works, get a reg editor and do as stated, it works.
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
CocheseUGA said:
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
Click to expand...
Click to collapse
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
smittyofdhs said:
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
Click to expand...
Click to collapse
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
CocheseUGA said:
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
Click to expand...
Click to collapse
Good deal, glad it worked for you....
when I install S2U2 (i go thru phases where I want it, then phases of "get it off my Tilt") the first thing I do is remove the exception for PIE.
FYI.... Likewise, if you run any of the Cube or TouchFlo variants out there, you will need to put an exception into the TouchFlo settings for S2U2. What happens if you don't is when you try to slide to unlock (or slide to answer) you end up invoking the Cube or TouchFlo, instead of S2U2. Just an FYI for you....
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
CocheseUGA said:
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
Click to expand...
Click to collapse
that's the way to do it. I've been using PPC devices for years and years and everytime I get a new one, I try every hack, reg edit, tweak, and app possible.

Remap Soft Keys on the Kaiser

Hi folks,
Is there a way to remap the soft keys on the Kaiser?
I am sure there is; I would appreciate it if someone explained to me how.
I had to uninstall Pocket Informant and I can't access the original Calendar app on the left soft key!!!
Many thanks,
MAC
MACkjam said:
Hi folks,
Is there a way to remap the soft keys on the Kaiser?
I am sure there is; I would appreciate it if someone explained to me how.
I had to uninstall Pocket Informant and I can't access the original Calendar app on the left soft key!!!
Many thanks,
MAC
Click to expand...
Click to collapse
advanced config tool
http://duttythroy.lives-in.eu/
SoftKey Changer
There you go.. Install, soft reset, and its under Start -> Settings -> System
I gave it a try but my expectations were that would be what that soft key would be no matter what program I'm in, but that is not the case. I guess I'll use somethign else like AE Button to get teh keys I want.
Thanks for the post though.
[EDIT]
By the way, after uninstalling, the button assignments remain. Interesting.
Yep use AE Button. It's an amazing tool! Although be careful what you change as it can mess up your device used carelessly.
duncstar said:
There you go.. Install, soft reset, and its under Start -> Settings -> System
Click to expand...
Click to collapse
Thanks very much. I will give this a try.
In the meantime I had to restore a previous version from SPB Backup and this got sorted. I have decided not to re-install Pocket Informant 8 as it caused some isues with ringtones and performance.
I put this on my HTC Tilt and it works awesome, exactly what i was looking for to change the two soft keys.
Hi there, hope everyone is well.
I installed the softkey changer cab , and it seemed to install fine. I was able to find it under settings with no problem and set the left softket to 'new sms'. However when I try to actualy use this from the homescreen i get an error message saying:
"The file 'tnsms' cannot be opened. Either it is not signed with a trusted certificate, or one of its components could not be found. If the problem persists try reinstalling or restoring this file."
I have tried reinstalling, but got the same problem. I can still send an sms if I go through contacts, or messaging, but would love to have this as a working softkey as it tends to be the function I use the most.
Other than installing google maps and opera mini, there have been no changes made since I received the phone a few days ago. It is a standard HTC tytn II.
I'm completely new to this, and any advice would be greatly appreciated.
Many thanks, James.
RunsHouse said:
Hi there, hope everyone is well.
I installed the softkey changer cab , and it seemed to install fine. I was able to find it under settings with no problem and set the left softket to 'new sms'. However when I try to actualy use this from the homescreen i get an error message saying:
"The file 'tnsms' cannot be opened. Either it is not signed with a trusted certificate, or one of its components could not be found. If the problem persists try reinstalling or restoring this file."
I have tried reinstalling, but got the same problem. I can still send an sms if I go through contacts, or messaging, but would love to have this as a working softkey as it tends to be the function I use the most.
Other than installing google maps and opera mini, there have been no changes made since I received the phone a few days ago. It is a standard HTC tytn II.
I'm completely new to this, and any advice would be greatly appreciated.
Many thanks, James.
Click to expand...
Click to collapse
This helped:
http://forum.xda-developers.com/showthread.php?t=357163
Essentially, change the value of the key to /Windows/(your SMS program)
Mine was tmail.exe.
Now I wonder... how do I not go to the messages screen and go directly to a new SMS?
I'm having the same problem on a Tilt.
modestmelody said:
This helped:
http://forum.xda-developers.com/showthread.php?t=357163
Essentially, change the value of the key to /Windows/(your SMS program)
Mine was tmail.exe.
Now I wonder... how do I not go to the messages screen and go directly to a new SMS?
I'm having the same problem on a Tilt.
Click to expand...
Click to collapse
Thanks for the advice, I will probably give that a go when I've stopped being so scared of changing registry stuff.
I did find another app that does the trick though. Just make sure you add a shortcut to 'new sms' first (bottom option of the config screen), you should then be able to assign this to either softkey.
Works for me, and I'm able to go straight to a new sms from the homescreen.
Hope it helps, all the best.
James
RunsHouse said:
Thanks for the advice, I will probably give that a go when I've stopped being so scared of changing registry stuff.
I did find another app that does the trick though. Just make sure you add a shortcut to 'new sms' first (bottom option of the config screen), you should then be able to assign this to either softkey.
Works for me, and I'm able to go straight to a new sms from the homescreen.
Hope it helps, all the best.
James
Click to expand...
Click to collapse
Worked perfectly. Thanks.
RunsHouse said:
Thanks for the advice, I will probably give that a go when I've stopped being so scared of changing registry stuff.
I did find another app that does the trick though. Just make sure you add a shortcut to 'new sms' first (bottom option of the config screen), you should then be able to assign this to either softkey.
Works for me, and I'm able to go straight to a new sms from the homescreen.
Hope it helps, all the best.
James
Click to expand...
Click to collapse
That's it! *Real* new sms Thanks!

Messages open at the bottom!?

Anyone else got this... Every time i open a message it seems to default to the bottom of the message... i.e. a blank screen. So I have to scroll up to the top of every message i get!
How do i fix this!? its really annoying!
I have the same problem... I think it is rom specific though... I am using WM6.1...Sleuth V3
It's a registry hack issue. Install Kaiser Tweaks and disable the D-Pad scrolling.
If you are using Kaisertweak, make sure you have the D-Pad Scroll Navigation set to default.
fantastic - thanks
when i installed KaiserTweak i basically just put everything onto it's advised setting
Which option is it? I cant find it in KaiserTweak.
CorruptedSanity said:
Which option is it? I cant find it in KaiserTweak.
Click to expand...
Click to collapse
In KaiserTweak Collapse all the trees one by one until you get all the way down to PocketIE. In there set D-Pad Scroll Navigation back to Disabled.
AFAIK, this is not a registry problem. in fact all you have to do is to choose the way your messages are arranged
at the right upper corner of the messages application (right below the clock) there is a tab that arranges your message by: Message Type, From, Received, Subject
normally it's ticked to received, but if you hit Received again you will see your messages arranged from the older one you got and the newest is at the bottom... all you have to do is to hit Received again.. And you're done
Cheers
duke911 said:
AFAIK, this is not a registry problem. in fact all you have to do is to choose the way your messages are arranged
at the right upper corner of the messages application (right below the clock) there is a tab that arranges your message by: Message Type, From, Received, Subject
normally it's ticked to received, but if you hit Received again you will see your messages arranged from the older one you got and the newest is at the bottom... all you have to do is to hit Received again.. And you're done
Cheers
Click to expand...
Click to collapse
Perhaps you should read the actual issue again, cos you're talking about something else
oh, my bad...
knwoing this is the isuue, it happens with me also sometimes
Thanks
Hi Guys, Thanks alot. that was really starting to bug me, and I had the feeling that the only way to return it to "normal" would be to hard reset, so just deseleting the D Pad in the Tweak and soft resetting has saved me alot of trouble.
Thanks Again,
Tom
KaiserTom said:
Hi Guys, Thanks alot. that was really starting to bug me, and I had the feeling that the only way to return it to "normal" would be to hard reset, so just deseleting the D Pad in the Tweak and soft resetting has saved me alot of trouble.
Thanks Again,
Tom
Click to expand...
Click to collapse
Hey guys,
I'm experiencing the same thing with a Helmi AKU 3.5 ROM that I've put on my Universal. I know that KaiserTweak is for the....Kaiser, but I was wondering if anyone knew exactly which registry hack to change to "disable DPad scrolling". I read in one of these posts that it was under the PocketIE settings, and I do know that my PocketIE has been hacked to support "high resolution mode", so maybe this is what is causing my issue (although I've found nothing about the setting in IE itself).
If anyone can enlighten me (probably with a Registry setting), even if you've already 'fixed' your Kaiser, I would appreciate it immensely, as this small issue is slowly driving me nuts!
Thanks in advance all,
-scar

Right soft key

Hi i have a kaiser on Uk orange. the right soft key says 'Go To ...' ttry as i may i can not change it at all. i have tried FdcSoft SoftkeyAppletEx, Key swop, Advanced Config and even editing the registry at Hkey_current_user\software\microsoft\today\keys\113 (where they have two extra keys called 'mem1' and 'mem2'.) however whichever method i try the key always resets itself back to 'Go To'
Does anyone have any ideas how i can try and change it at all?
Cheers
edblack said:
Hi i have a kaiser on Uk orange. the right soft key says 'Go To ...' ttry as i may i can not change it at all. i have tried FdcSoft SoftkeyAppletEx, Key swop, Advanced Config and even editing the registry at Hkey_current_user\software\microsoft\today\keys\113 (where they have two extra keys called 'mem1' and 'mem2'.) however whichever method i try the key always resets itself back to 'Go To'
Does anyone have any ideas how i can try and change it at all?
Cheers
Click to expand...
Click to collapse
Thats strange, I always use advanced config for that and its working like a charm.
if youur on orange chances are youve got that crappy side bar on. go to settingsstart - settings - today - go to the second tab laballed ITEMS then untick the orange item. when you go back to your today screen contacts should be on the right
Yeah that did it cant believe how long it has taken to find that out, however is there any way i can get the sidebar back (not necessarily that one but an alternate one) as its really useful to have that stuff on the screen.
edblack said:
Hi i have a kaiser on Uk orange. the right soft key says 'Go To ...' ttry as i may i can not change it at all. i have tried FdcSoft SoftkeyAppletEx, Key swop, Advanced Config and even editing the registry at Hkey_current_user\software\microsoft\today\keys\113 (where they have two extra keys called 'mem1' and 'mem2'.) however whichever method i try the key always resets itself back to 'Go To'
Does anyone have any ideas how i can try and change it at all?
Cheers
Click to expand...
Click to collapse
Try this one mate, letme know how it works out for you
raiisik he sorted the soft key out
you might want to consider the htc home plugin it shows time sms phone links to other apps and it customisable
look on the wiki page for more information
edblack said:
Yeah that did it cant believe how long it has taken to find that out, however is there any way i can get the sidebar back (not necessarily that one but an alternate one) as its really useful to have that stuff on the screen.
Click to expand...
Click to collapse
Oh, solved. Didnt see that one, slow read/typer I guess Well if someone else need to remap that is an exelent app for it
jayjay8585 said:
raiisik he sorted the soft key out
Click to expand...
Click to collapse
Yeh I saw and comment it
jayjay8585 said:
you might want to consider the htc home plugin it shows time sms phone links to other apps and it customisable
Click to expand...
Click to collapse
I am deffently not following here mate?
jayjay8585 said:
look on the wiki page for more information
Click to expand...
Click to collapse
Why should I read the wiki? I havent done anything wrong have I
raiisak is htc home in you cabs.
jayjay8585 said:
raiisak is htc home in you cabs.
Click to expand...
Click to collapse
I am what? Um, I am slow today but I dont get this. I have some HTC Home cabs yeh but havent released any in my corner. Only thing I have there is a hotfix for Leo`s V9 who was bugging some of the light users thats all.
sorry wait hold up
i was telling the thread starter to read the wiki and i also wanted him to consider htc home for what he now needs. and i was asking you if you have htc home in your corner
jayjay8585 said:
sorry wait hold up
i was telling the thread starter to read the wiki and i also wanted him to consider htc home for what he now needs. and i was asking you if you have htc home in your corner
Click to expand...
Click to collapse
Aha! I follow now, after a cup of coffee and youre explenation its all good
About the HTC Home, no I dont have it in my corner. I have some modified Diamon style tweaked for some of the dialers but havent made a cab of it since there is floating several around in here already. I might whanna have a go skinning one if I come up whit a kewl idea though. I am working on a SPB Theme atm (well not now, vacation atm. But will continue that project once back home), after that I have planned to make a cab/guide whit a nice theme for ultimatelaunch. And I also have promised a icon pack and some animations and on top of that I am eager to get back and work whit Leo on future projects. So it is kinda tight program for hobby timeline, but if you got a certain wish you could request it in my corner and who knows what happends from there and out
cool. it was just to show edblack in the right direction

Suddenly can't change input methode anymore

I can't choose my input method anymore. I selected the normal keyboard, and when I click te small arrow to select another method the keyboard just dissapears.
The only way to change it now is to use the program SipChange I found on this board but I would like to know how I can enable the "quick" switching again.
I looked into HKCU\ControlPanel\Sip\AllowChange and the value is "1"
I really don't want to hard-reset because I just spend a whole afternoon configuring my Diamond and installing apps
Good news is that it is definitely a registry issue. I had the same (arrow should activate HTC custom thumb sized menu of SIPs, but does nothing) and a simple registry restore (spb Backup) fixed it. So, no idea what registry key the issue was (also checked AllowChange first) but it's there somewhere...
Not sure what caused it tho; installed TouchPal several tiems, but when I reinstalled after fix it was all good so can't blame TouchPal just yet...
Yeah I don't have a registry backup
For now I'm using sip changer but it's not very easy so I hope I can get it fixed without hard-reset
Anyone? It's starting to get very annoying working like this
This just happend to me too One minute it worked, then it dident.
Anyone have a fix yet?
jolley_small said:
This just happend to me too One minute it worked, then it dident.
Anyone have a fix yet?
Click to expand...
Click to collapse
Anyone? Just happened to me too!
Don't believe I've changed much on my phone since it was last working correctly.

Categories

Resources