Related
Hey guys and girls,
I got my brand new X1i on an O2 contract today, ordered through the internet.
However, when switching it on, the first thing that stands out is the screen isn't all black. The upper right hand corner fades to like a dull greeny tinge as if its under pressure or something.
After fiddling around with it, it seems to be the backlight as in bright light, the colours all look fine and black is black. This is also the cause if the backlight is put at it's dullest, but it's most noticable when its at it's brightest.
Is this a issue with all Xperias or just mine?
And is this serious and worth contacting O2 about or will it be okay?
BUMP.
Could anyone tell me simply if this is a common problem, if not, I'll ring O2 now.
A quick reply would be nice
I haven't seen it before and I haven't seen it reported before. If you think it looks out of the ordinary, too much to leave it be, you should indeed phone O2.
Cheers, I shall call now
Post a picture so we can compare and lets us know how it turned out, mkay? =]
Heres the best photos I can snap.
The first two don't really show it well, but the third is the best.
Trust me, when you first switch it on and the Sony Ericsson logo appears, the whole screen is black and that corner fades to that dull green colour. It stands out quite a bit, it's also noticable on the Panels screen.
If you have a dark photo showing, it can affect the colours on that too.
For such a pricey phone, I expect it to be flush black across the screen.
(They're big, so I left them as links. I left them big to show the detail)
Photo 1
Photo 2
Photo 3
I just got off the phone to O2, they get the phone from a third-party so I am expecting an email from them. The woman on the other end said, most likely they will swap it for a new handset at the door, or take it for repairs....but it will say in the email.
Ah, classic case of backlight bleeding. Send it back and you'll get a new one.
Well, hopefully, before next week is out I shall. Just waiting for that elusive email, they said I should have received it by Monday.
Thank you for you're help, I appreciate it
There was a thread on this, some have it too.
I have it as well, black light bleeding. I dont really mind it much since I rarely notice it.
Ive decided to leave it alone since my X1 is unlocked and it'd be a massive hassle to send it away to SE.
I'm pretty sure its common. Even high end LCD TVs have the problem sometimes.
I had it on my first x1 (which I dropped and got a new through insurance), and I've also got it on my new x1.
However, I barely notice it, so I'm okay with it
I wouldn't mind so much if it was white but its a green colour, thats more annoying.
It's gonna get sorted anyway, most likely, they'll swap it at the door for a new one.
I was looking for information about the SPB mobile shell and found this thread.
I also have this issue with the top right corner of the screen, especially when I switch the phone on (on the black startup screen with "experia" written in white).
After startup, I don't really notice the issue since this area of the screen is almost never black (except when switching panels and sometimes when watching videos, but it's hardly noticeable). I'm now wondering if I should return it or not, I got the phone on tuesday and already had to do a hard reset (and reinstall everything I had just installed before) because I couldn't send or receive text messages! I really hope this won't get any worse...
(My phone is a french version, and my carrier is SFR)
Ive had the same issue w/ one...i just returned to BestBuy yesterday and now the replacement is also doing this as well...1 day later
Me too, bugging me like crazy, but seems to be quite common.
- Anthony
Mine has it too but its really not a big deal. I've only noticed it on bootup.
Yeah, don't mind it on startup - who watches it start up?
But I notice it when using the camera (in the black border) and
when switching panels, that's where it's annoying.
- Anthony
yeaa, i got the same problem too. Went over to the sony ericsson centre and they don't have a clue what it was. They said they'll look into it, and thats it. No replacement.
Not happy
i live in indonesia by the way..
Mine too has the issue. Both upper corners are bleeding greenish. It's obvious when the screen is black, not only on start-up, all the time. For example, look at it when playing a movie trailer with really black scenes, it's there.
It has to do with the pixels, not the back-lighting, from what I understand of TFT functionality.
Remember the dead pixels issue on TFT screens? Well, the dead pixel means the transistor of at least one color out of the 3 (RGB) is dead, either locked closed or locked open (anyway, not being able to modulate the light intensity of the subpixel color), so the color is either missing or present at a fixed value, the overall color of the pixel not being the required one. In this case is an issue of mismatch of transistor parameters.
The GREEN pixels do not close completely to block the light. Being a progressive issue from one area to another, it's clear that the thin film transistors are progressively mismatched by the process errors. This is process error in the TFT technology (I work in microelectronics). The process masks can get errors (not the case here), or the masks are ok but the etching process is not properly adjusted. In my Xperia the bleeding gets progressive towards the corner, having a starting point like a center from where it spreads. That is because the etching involves chemicals and liquid flow to spread and cleanse those chemicals. My opinion is that the flow in the case of this particular TFT screen model is from the bottom to the upper side, where the upper corners are the bleeding areas for the chemicals and the effectiveness of cleansing is lower, combined with surface tension of the liquids. The transistors get progressively mismatched in parameters (beta factor) and since they all get driven with the same signal, they block the light less than the good ones. Nothing to do about it. Theoretically it might be possible to map out those pixels and provide a corrected voltage for the mismatched transistors (correction table in the GPU DAC ROM), but this is like tooth extraction through the ass hole (or replacing the spark plugs through the exhaust pipe). It's simpler to just get the ****ing screen right. Sorry guys, we are out of luck here. It seems the 800x480 3inch TFT's are not yet top quality, or at least the ones used by SE. I'm really frustrated that the manufacturer used a cheaper screen in a 600-800$ product. This is how a company can loose customers and get the image crumpled.
Recently, I've been considering getting a Nexus One, however, most of the reviews I read say that the N1's capacitive buttons are a little unresponsive. You must tap the upper half of the button as opposed to the bottom half of the button.
I've also read that some of the cyanogen roms have fixed this problem. Can anyone give me more insight on this issue?
I've never had a problem with mine.
I saw a review saying that they got in the way when typing w/ the onscreen keyboard, but I haven't even had that, and I'd like to think that I have pretty normal-sized fingers.
Some people have problems, others don't i personally haven't. I wouldn't consider it to be something important enough to sway me from a sale though.
Stock Rom had this issue. If you unlock your bootloader, all the kernels (and mods) available now have a fix for this, as well as a few other things.
Im sure when 2.2 update comes out this fix will be passed on to the stock version too (at least as far as im aware it hasnt already!?). So tbh this isnt an issue for you not to get a nexus one...also, there's no point getting a nexus one if ur too scared to unlock the bootloader!!
adam18488 said:
Stock Rom had this issue. If you unlock your bootloader, all the kernels (and mods) available now have a fix for this, as well as a few other things.
Im sure when 2.2 update comes out this fix will be passed on to the stock version too (at least as far as im aware it hasnt already!?). So tbh this isnt an issue for you not to get a nexus one...also, there's no point getting a nexus one if ur too scared to unlock the bootloader!!
Click to expand...
Click to collapse
Definitely! That's one of the biggest reasons why I want an N1. It has a good root and dev community and gets android updates first.
I just thought it'd be annoying to have to use a phone with crappy capacitive buttons, but I'm glad to hear that the problem has been fixed.
The only other thing I'm worried about is the dualtouch but it's most definitely going to get fixed in the next update.
Thanks to everyone for their input. I'll definitely be picking up an N1 soon
I have rooted and custom roms etc and I still hate the capacitive buttons with a passion. They are not nearly enough to topple the overall awesome that is the N1 but man I hate those things.
I only hate those buttons, when Nex is in my car mount!
adam18488 said:
Stock Rom had this issue. If you unlock your bootloader, all the kernels (and mods) available now have a fix for this, as well as a few other things.
Click to expand...
Click to collapse
Is this true? I've tried plenty of ROMs and kernels and I don't remember any of them changing the button sensitivity.
The best way to show off how frustrating the buttons can be is to give the phone to someone that's never played with it before and watch as they struggle to register touches on the buttons. The people that use the phone daily have recognized that the touchpad is above the button and never think about it any more.
It's very apparent as soon as you rotate the phone into a different position though.
PrawnPoBoy said:
Is this true? I've tried plenty of ROMs and kernels and I don't remember any of them changing the button sensitivity.
The best way to show off how frustrating the buttons can be is to give the phone to someone that's never played with it before and watch as they struggle to register touches on the buttons. The people that use the phone daily have recognized that the touchpad is above the button and never think about it any more.
It's very apparent as soon as you rotate the phone into a different position though.
Click to expand...
Click to collapse
I also haven't noticed any change in the sensitivity with different ROMs or kernels. For me though, sometimes if I hit right on top of the button it won't register. I am used to just tapping it a little above and it works everytime.
As others have said, this is definitely not a deal breaker for me or shouldn't be for any person IMO. This phone's pros far outweigh the cons.
The best way to show off how frustrating the buttons can be is to give the phone to someone that's never played with it before and watch as they struggle to register touches on the buttons. The people that use the phone daily have recognized that the touchpad is above the button and never think about it any more.
Click to expand...
Click to collapse
When someone is doing that you should just say that it has Finger print authentication technology
absolutely true and this was my discovery today (day 4 with n1). the buttons work fine if you cheat towards the top of the button area and overlap into the screen area.
that solved it for me.
resolved for me for now...
xboomer55 said:
absolutely true and this was my discovery today (day 4 with n1). the buttons work fine if you cheat towards the top of the button area and overlap into the screen area.
that solved it for me.
resolved for me for now...
Click to expand...
Click to collapse
Did you just buy your N1 from Google brand new?
Those buttons are a pain in the bum, but you get used to them, the bigger problem is if the phone gets too cold it starts mis-registering the touchscreen necessitating a reboot or a bunch of mucking around to fix it. This is the biggest annoyance with the phone for me, hopefully they fix the screen calibration in 2.2!
Almost swapped mine for a Desire, thinking less of doing so now, unless anyone can offer a good reason
I got my N1 straight from Google on day one, and I'm currently running CM 5.06
I find the capacitive buttons to be _awful_ if I tap directly on them it takes 2-5 attempts to get it to register.
However, I have found that if I swipe from the button down off the bottom of the button it registers ever single time.
I'm pretty convinced that the problem isn't the digitiser itself but in the driver that splits that section of the digitiser off. I believe it checks to see if there is upward movement before registering a button tap and if it does detect upward motion it cancels the tap event and forwards the event as a touch screen event. I also thing that because I have pretty big fingers any time I press the flattening of my finger registers as a slight upward motion.
If I could find the button "sub"-driver I'd be hacking at it right now.
Still, I wouldn't give up my N1.
SilentMobius said:
I got my N1 straight from Google on day one, and I'm currently running CM 5.06
I find the capacitive buttons to be _awful_ if I tap directly on them it takes 2-5 attempts to get it to register.
However, I have found that if I swipe from the button down off the bottom of the button it registers ever single time.
I'm pretty convinced that the problem isn't the digitiser itself but in the driver that splits that section of the digitiser off. I believe it checks to see if there is upward movement before registering a button tap and if it does detect upward motion it cancels the tap event and forwards the event as a touch screen event. I also thing that because I have pretty big fingers any time I press the flattening of my finger registers as a slight upward motion.
If I could find the button "sub"-driver I'd be hacking at it right now.
Still, I wouldn't give up my N1.
Click to expand...
Click to collapse
Just realized that!!
It does not get the upward movement
It gets: right, left & down
So this means, one could set different options for different directions...
hacker01 said:
Recently, I've been considering getting a Nexus One, however, most of the reviews I read say that the N1's capacitive buttons are a little unresponsive. You must tap the upper half of the button as opposed to the bottom half of the button.
I've also read that some of the cyanogen roms have fixed this problem. Can anyone give me more insight on this issue?
Click to expand...
Click to collapse
I have noticed no issues when holding the phone in my hands but the responsiveness is not that great if the phone is flat on a desk or a similar surface. I wonder what if anything the accelerometer may play a factor.
PrawnPoBoy said:
Is this true? I've tried plenty of ROMs and kernels and I don't remember any of them changing the button sensitivity.
The best way to show off how frustrating the buttons can be is to give the phone to someone that's never played with it before and watch as they struggle to register touches on the buttons. The people that use the phone daily have recognized that the touchpad is above the button and never think about it any more.
It's very apparent as soon as you rotate the phone into a different position though.
Click to expand...
Click to collapse
I dunna man, my 3-year-old daughter figured it out within a minute of getting my phone. I set her up in a game and she decided she wanted something else, so she messed with the capacitive buttons until she got out of the game. Once she had it once or twice (~5-10 seconds for her to figure out each time) it was pretty much instant after that. If a 3-yo can figure it out, I'm pretty sure it's not THAT difficult. Annoying, sure....but not difficult.
hacker01 said:
Did you just buy your N1 from Google brand new?
Click to expand...
Click to collapse
Yes. Direct from Google.
Wow there's definitely a good mix of answers. I thought that the newer batches of N1's fixed the capacitive button problem, but apparently not.
I guess there's not a definite answer. It seems the only conclusion you can make is that some N1's may still have the problem, some may not. Some can be fixed with custom roms and unlocking the bootloader and some cannot. Your results may very.
EDIT: After rereading some of the previous posts (more carefully. excuse my sleep deprived state lol), the capacitive button issue might actually be more of a feature than an issue. I've read similar posts about the capacitive buttons having that sort of "motion detection" thing to prevent accident presses. Hopefully for anyone still having the problem, you can reread some of the posts on this page and give their methods a try
I haven't had a problem with mine but I haven't had the problems most people say they have with the phone so I would recommend this phone to anyone that wants an android phone
-------------------------------------
Sent from my Nexus One
Device: Nook Color rooted to 1.1
I had my Nook Color in the car today (40 degrees or so), pulled it out to show her what it looked like rooted. While standing in the driveway showing her different things, I found the touch screen was overly sensitive. As I was scrolling through different things (the app list, twitter, facebook), the slightest touch would select/open an item. It normally doesn't do this. It was incredibly frustrating and almost unusable. I pulled it out later and it seems to be behaving like it normally does.
Does temperature affect the NC screen? Where they any touch screen changes in 1.1? Is there a setting to calibrate the touch screen? I can't seem to find one. Any other suggestions?
I tried doing a search on the forum, but the search crashed.
Thanks.
horsemom said:
Is there a setting to calibrate the touch screen? I can't seem to find one.
Click to expand...
Click to collapse
I was wondering this myself. My input doesn't seem to register as I get towards the edge of the screen.
tactfulcactus said:
I was wondering this myself. My input doesn't seem to register as I get towards the edge of the screen.
Click to expand...
Click to collapse
I don't know if it's placebo or not, but I feel like this app improved my screen response.
http://forum.xda-developers.com/showthread.php?t=934500
As for the other question, I would expect the screen to be less responsive in cold weather, but I don't have anything to base that on.
Guessing what you experienced was due to condensation on the screen. Doesn't take much and can be 'invisible' to you but the screen is sensitive to 'stuff' on the screen and will become overly sensitive if there is anything on it, like moisture, skin oils, etc .. a screen protector may help but unless it continues that is probably the cause.
tactfulcactus said:
I was wondering this myself. My input doesn't seem to register as I get towards the edge of the screen.
Click to expand...
Click to collapse
What you experience is probably temperature related, but another thing to try is to increase the LCD screen density to around 190, 200, or a little more. For me, I get improved sensitivity, especially near the corners.
My daughter accidentally got a little water on the screen and it was a little erratic. I put it in a ziplock with a handful of rice for about 6 hours and it was like new.
I have owned 3 nook colors, the first one I owned freaked out when I used a damp cloth to wipe the screen. It exhibited some strange behavior and emitted some loud static from the speaker. It would not power down or anything... finally it just went back to normal, so I took it back to B&N and then went and bought one at walmart. I took it back because I thought I wanted the Viewsonic G Tablet. But after trying it I finally bought a Nook Color at Best Buy, bought a screen protector too so that I don't have a repeat of my first NC. The screens on these things are, I believe, rather sensitive and the cold or the moisture may have played a part in your unit's behavior.
migrax
tactfulcactus said:
I was wondering this myself. My input doesn't seem to register as I get towards the edge of the screen.
Click to expand...
Click to collapse
Same here. My screen also seems very inaccurate.
Have you found a fix?
Sent from a NookColor using the xda app
I'd be interested in a solution for this as well, since the edges of my NC screen seems to be a lot less sensitive. For instance, when the Market is launched, it takes 4-5 tries to hit the search button at the right top corner (I know that I can hit menu and select search from there, but I am trying to illustrate my point).
tenderidol said:
I'd be interested in a solution for this as well, since the edges of my NC screen seems to be a lot less sensitive. For instance, when the Market is launched, it takes 4-5 tries to hit the search button at the right top corner (I know that I can hit menu and select search from there, but I am trying to illustrate my point).
Click to expand...
Click to collapse
this modified kernel solves that
http://forum.xda-developers.com/showthread.php?t=925451
and you'll also get a speedier nook
It's funny, actually... The cold makes your skin less detectable because of vasoconstriction in your fingers as a physiological response to the cold temperature, but a hint of moisture by means of condensation has the opposite effect.
For me, condensation is rarely a problem, but the decreased capillary blood flow effect is quite noticeable.
Sent from my Nexus S using XDA Premium App
One thing that's been mentioned before (and the B&N salesman told me while buying a screenprotector) is that if the screen has a lot of fingerprints, it'll make the nook act weird.
Try wiping the screen of fingerprints.
don_ernesto said:
this modified kernel solves that
http://forum.xda-developers.com/showthread.php?t=925451
and you'll also get a speedier nook
Click to expand...
Click to collapse
Thanks for the reply. Is it safe to assume that the screen sensitivity would not be an issue in Honeycomb since it is designed for tablets? If so, I may just wait for the final release of HC before fiddling with different kernels,etc. Thanks!
tenderidol said:
Is it safe to assume that the screen sensitivity would not be an issue in Honeycomb since it is designed for tablets? If so, I may just wait for the final release of HC before fiddling with different kernels,etc. Thanks!
Click to expand...
Click to collapse
final realease of HC? no one knows if we will ever have one...... anyhow, it seems to be a fix at kernel level (had to be fixed in eclair, froyo and HC), and it fact, it was discovered by deeper (the guy who ported our HC version)
my suggestion? go for it now. the sensitivity problem is way too bothersome, and it is very easy to apply
don_ernesto said:
final realease of HC? no one knows if we will ever have one...... anyhow, it seems to be a fix at kernel level (had to be fixed in eclair, froyo and HC), and it fact, it was discovered by deeper (the guy who ported our HC version)
my suggestion? go for it now. the sensitivity problem is way too bothersome, and it is very easy to apply
Click to expand...
Click to collapse
Thanks again for the reply.
Yes, I'd love to take care of it ASAP, since I'm sick of trying to hit a small button on the screen and going somewhere else instead.
My NC was rooted with B&N 1.1 + Autonooter 3.0. Will I still be able to "apply" the changes that you mentioned on top of that or do I have to start from scratch?
Thanks!
tenderidol said:
My NC was rooted with B&N 1.1 + Autonooter 3.0. Will I still be able to "apply" the changes that you mentioned on top of that or do I have to start from scratch?
Thanks!
Click to expand...
Click to collapse
go ahead! you won't loose any app or any data (not even your progress in Angry Birds)
Of course, before applying this changes i always make a backup. good to have a way back in case something goes wrong
Good test tool
I ran GoJimi's tool, and since then my screen has been flipping out. Typing anything is a good test...I enter one key like "z", and get 2 - "zm". Utterly maddening.
A good tool to see what's going on is "Mutitouch Test" from JerryW in the market.
When I press with one finger, I see a "phantom" 2nd point jumping around. Very quick way to see 1) how good tracking is and 2) if there's any random inintended multitouch action happening.
Is there any programme to for screen calibration? So part of the screen seems not responsive.
That is a hardware issue not a Calabration issue..
does somebody know if this "hardware issue" is present at all note's?
i found that my screen is a bit unresponsive at the top right corner. i cant draw about 2mm to the border of the screen (with the pen)!
lolcat12 said:
That is a hardware issue not a Calabration issue..
Click to expand...
Click to collapse
However when I flash a new rom the screen get responsive for a short while. After that I need to press the screen harder. On the bottom right hand corner has this problem.
helmetbox said:
However when I flash a new rom the screen get responsive for a short while. After that I need to press the screen harder. On the bottom right hand corner has this problem.
Click to expand...
Click to collapse
Did you ever solve this problem? Mine started doing it after it updated KL7 OTA.
Well guys I'd like for someone to chime in on this. I thought for sure this was a hardware issue. I'm on my second note now. My first note seemed like it was having issues with the lower right corner of the touch screen. I thought maybe it was a rom issue. I flashed clean KL7 and it seemed to suddenly be better then after a little bit it got worse. I have my second note and I flashed KL7 right away on it. Now after a little bit it seems to be getting less responsive, still better than my first, but I'm beginning to think this is a software issue. Any of you having these issues what Rom are you on? Should I try changing out this note for a third and see what happens? I may flash to some other firmwares to see too.
my top right is a bit unresponsive as well. . it works but seems a bit off. .
I used swipepad , really useful taskswitcher
It does not work when phone is connected any charger.
I've definitely noticed the phone being less responsive when on the charger, but this seems to lose responsiveness over time off charger and on battery.
I've had other phones that from time to time would act a little wonky when using them while charging.
Hey,
I've had some display problems, both with regards to calibration and also when it's charging.
I have made this video to demonstrate a problem I have of calibration. Watch how the display detects a signal at a point offset from where I press with the pen.
For me the problem I saw using the *#*#2664#*#* test is that the last 10 pixels or so on the 2 end sides of the screen don't respond.
For the pen offset is cause of the left or right handed settings, I find that holding the pen and rotating it so that my thumb presses the button of the pen instead of the indicator finger gives pretty good accurate results.
I'm definitely thinking this is at least more software related than hardware. I don't remember noticing any problems when on KJ1 or KK1. So I flashed back to KK1. It started it up and then I did a quick factory reset. This is completely stock/unrooted. Anyway bottom right corner seems to be having no problems detecting my touch now. I'll leave it on this for a few days and play around and see if it seems to lose sensitivity again. If it does I'll let you guys know, but for this to be a hardware problem I can't imagine it being this intermittent. Any of you on KL7 that mentioned this issue, are you guys completely stock KL7 or using the CF-Root Kernel? I know someone mentioned losing functionality in music player and torch and it seemed to be an issue with an alternate kernel.
trumpetboy101 said:
Hey,
I've had some display problems, both with regards to calibration and also when it's charging.
I have made this video to demonstrate a problem I have of calibration. Watch how the display detects a signal at a point offset from where I press with the pen.
Click to expand...
Click to collapse
That´s normal - pen is calibrated to use it at a certain angle - try to change the setup from right handed to left handed and you will see a different offset if you make the same test again.
The offset should be the same on each area. Only if this is not the case i would say, there is an issue with the screen.
Hey, ok so it is a deliberate software decision. Kinda sucks- I'd think I'd sooner like to have it type directly below where I write. I'm guessing it is an attempt to account for the fact that the glass has a finite thickness. Sooooo does anybody fancy writing a kernel alteration for this...?
i also find it more annoying than useful
Couple days on KK1 and what I thought was a hardware problem still seems to be fine. It's detecting much better in the bottom right corner where I was having issues on KL7.
I am having the same issue with the reduced responsiveness of the bottom right corner. I've noticed it after updating to KL7. Maybe is the driver of the screen.
Is there any way we could report this back to Samsung?
Sent from my GT-N7000 using XDA App
Hello.
I have the same problem ate bottom right side of the screen. I am ate LA4.
what should I do?
Although the problem was nearly imperceptible some days ago, while the note was connected to the charger, I've noted a very small area near the bottom right side of the screen where it was difficult to write using the stylus with SMemo. On the opposite side the loudspeaker is present; and so I've thought it might be correlated with the magnetic field of the loudspeaker. Today I've performed the *#*#2664#*#* test with and withouth the charger, but the problem is not occurred. Because of these devices are always more complex I prefer snap closures for my cases.
I've bought an Xperia Z3+ two months ago, recently, I've discovered a certain bright spot on its screen, it's particularly available in white and bright backgrounds, it's less noticeable in black backgrounds, and not at all noticeable in non-solid backgrounds.
I know that it's a hardware issue, but the warranty here is a joke, and I don't want to pay for a new screen for such a small issue.
But on the other hand, once I noticed it, it's all I could see in the mobile, and it removes the whole premium feel in it.
I've manually removed the back cover and there's no issue in the battery that would make it press towards the screen and cause such issue.
I was wondering if there's any manual fix for it? I know that it's a light diffusing layer problem, mostly caused by a certain pressure, but is there a way to make it normal again? A certain pressure in an opposite way, or heat, or suction from behind, etc.
Here's a picture that indicates the issue "It's more visible and annoying in real life"
I have the exact same problem at the very same position as you point. My country does not support officially the Z3+ and so the cost is really high. I searched enough on the internet and i think it is where the vibration is but i cannot confirm it. I also see it all the time because i simply know it is right there. At my case, there are other 2 spots but not seen so easy.
I only hope not to get bigger. I wish i knew what caused this so to be carefull (such as sun exposure or something else - although i am REALLY careful as a person with my mobile phones). I cannot help you and i got really dissapointed after my long search on the web so i will have to live with that. It is hardware problem as i really tried everything to find out that.
Hope someone has any solution. It is not only on our phone but to others too. I hope the post won't get lost after some days!
AntwnisGr said:
I have the exact same problem at the very same position as you point.
Click to expand...
Click to collapse
That's so weird, I thought it was caused by an anonymous fall that I wasn't aware of, the other point is barely noticeable but it's at the top left.
Also, my upper speakers started to produce mixed loud and faint sounds when i play something whike the volume is below 25%.
It's winter, and I usually text near heatrrs, which made me think that the speakers problem was caused by the heater and the screen problem was caused by a particular fall.
Since the warranty is useless I've manually disassembled the phone and there's nothing behind that spot of screen except battery, the vibrator is way below the navkeys, there's no screen on the other side of it, which actually seems to prove that our spots are similar by coincidence, because there's no pressure on the other side except for battery, and I highly doubt yours is faulty, because mine isn't.
My z3+ single sim also has the spot at the same place, but it isnt that noticable since i use auto brightness, really weird, i thought because maybe of accidental high press when the phone was in my pocket.Anyway, I'll switch to XZ premium in december, that sh*t is dope
On the top left corner i have too! So it is not a coincidence. Something is there that you couldn't see when you opened it. I only hope it doens't get worse..
I have it too not only there also in the right bottom corner and a line of 1 centimeters like 1 inch bow in the left upper corner one day was not in there and to the other plaff they appear
Sent from my E6533 using XDA-Developers Legacy app
Now that multiple people have it, I started to suspect that there's actually something.
I might open if again when I can't live with it anymore, but for now I'll try to enjoy it as it's new, and hopefully won't get worse.
I have a z3 and z4 that also have these white spots..no way to fix. look up tv lcd problems your not gonna be able to fix....it gonna keep me from buying anymore sonys till they switch to oled.
I have the same problem in the same position and it was happen after a warranty repair.... Sony didn't have noticed it....