Related
Since getting my Diamond a few weeks ago I've had to remove the battery several times as it has got stuck on a call, i.e. it will not hang up, originally had Elite ROM, now using Duttys V1.6 with Radio 1.00.25.07
Is anyone else having this problem ?
skearon said:
Since getting my Diamond a few weeks ago I've had to remove the battery several times as it has got stuck on a call, i.e. it will not hang up, originally had Elite ROM, now using Duttys V1.6 with Radio 1.00.25.07
Is anyone else having this problem ?
Click to expand...
Click to collapse
Please don't open up new threads where u can get a solution for your problem from where u got your cooked rom. ask your question in dutty's thread.
Sorry should stated that is happens no matter what ROM I use, stock HTC or cooked ROM and originally had Radio 1.00.25.05, changed to 1.00.25.07 and same problem
skearon said:
Sorry should stated that is happens no matter what ROM I use, stock HTC or cooked ROM and originally had Radio 1.00.25.05, changed to 1.00.25.07 and same problem
Click to expand...
Click to collapse
um it might be a device hardware issue.. try to call htc customer service and ask for repair
Why don't u use radio 1.00.25.05 back again it will help as it is the best radio rom till date with no issues.....
Hi all,
I have a AT&T Tilt with radio 1.27.12.11 as default. I followed the instructions on how to unlock and install custom ROMS on the phone. I have installed dutty's rom for now.
I found this video:
http://www.youtube.com/watch?v=fUvV1ZZAzcw
If you jump to 3 minutes in, does anyone know what ROM this is to get this interface? I would like this interface. The video author does not seem to mention it
Thanks!
George
hedpe said:
Hi all,
I have a AT&T Tilt with radio 1.27.12.11 as default. I followed the instructions on how to unlock and install custom ROMS on the phone. I have installed dutty's rom for now.
I found this video:
http://www.youtube.com/watch?v=fUvV1ZZAzcw
If you jump to 3 minutes in, does anyone know what ROM this is to get this interface? I would like this interface. The video author does not seem to mention it
Thanks!
George
Click to expand...
Click to collapse
Pretty much all new ROMs contain M2D take a look @ the Kaiser ROM Development and read the first page of the ROM thread then if your going to flash read more so you can know how to solve any issues that may have already been covered.
try to avoid the 6.5 hybrids due to some bugs between outlook/exchange that haven't been resolved yet. If you don't need email access then I recommend AthineOS's newest M2D release a couple days ago, Fast and stable with that 1 minor exception. I see this bug in other 6.5 releases.
you can always search out the manilla2d thread in the general forum I believe it is.. I am using a Kaiser rom by -G- that did not come with it preinstalled so I Was able to choose my interface & set it up myself using the v22 m2d instead of the v18 that most of the roms still contain.. I Dont think you even need to flash your rom to add m2d if you just install the cabs, someone will correct me if I am wrong, but I believe manilla2d is just a kick anus today screen plug in..
After a lot of efforts by a lot of people in the Raphael, i want to send a special thanks to Captain_Throwback
I sent him the rilphone.dll used in the diamond Rogers ROM to enable Name Display on my Diamond using Dutty's ROM v.4
With his knowledge he was able to cook a cab with the proper settings to enable name display without having to cook it directly in the rom.
Thats fantastic!
Please post your experience and what ROM you used this on.
I guess I will be the first to test this on 6.5.....
UPDATE:
One word....Brilliant
Thank you so much. I had this when we were in the 1.93 ROM days but then lost compatiblity with the newer ROMS.
This Restored it back...GREAT
Thanks for sharing D0MZE and thanks to Captain_Throwback.
Do I need to be running the original Rogers 1.00.25.06 radio too? Hesitant to try...tried a couple months ago using another method...didn't work and had to hard reset...
chgrbt said:
Thanks for sharing D0MZE and thanks to Captain_Throwback.
Do I need to be running the original Rogers 1.00.25.06 radio too? Hesitant to try...tried a couple months ago using another method...didn't work and had to hard reset...
Click to expand...
Click to collapse
Same thing for me! I'm a using HTC stock ROM with the original radio and I already tried something in the past and the radio stop to work, I had to hard reset.
MikaelG said:
Same thing for me! I'm a using HTC stock ROM with the original radio and I already tried something in the past and the radio stop to work, I had to hard reset.
Click to expand...
Click to collapse
On another "Rogers" thread, it was pointed out to me that this solution would only work if my "ROM has been patched to supported unsigned drivers", which is something I don't know.
See the thread:
http://forum.xda-developers.com/showthread.php?t=347882&page=33
I am actually not using the stock radio rom provided by rogers.
I updated my radio rom to 1.09.25.23
I'm not sure if Dutty in his rom has set the setting for unsigned drivers.
As far as I know, this worked, and was only on a software basis... I've been following the other thread about the raphael and it seems Captain_Throwback only did changed/added some Registry settings to make it work.
On that note, the rilphone.dll was taken out directly out of rogers original rom (the rom that came with the phone)
Does this not work with Duttys 5.2.20764.1.4.3_V4_Full_MSVC [2.03]?
I installed it and doesn't seem to do it.
Thanks
can someone getting working for D2 please
jasonchewy said:
Does this not work with Duttys 5.2.20764.1.4.3_V4_Full_MSVC [2.03]?
I installed it and doesn't seem to do it.
Thanks
Click to expand...
Click to collapse
I installed it on Duttys 5.2.20764.1.4.3_V4_Full_MSVC [2.03]
So I don't know? It should in theory work.
or you want to try something like this. You need to have data plan to make it works.
http://www.truecaller.com/
will this work on other htc wm phones; ie tilt on TOC 6.5; or tytn on wm 6.1??
My guess is that no... but if you're willing to try.. the worst thing that can happen is that you will have to hard reset your phone, but at least if you do try and it works, i mean it can help a lot of people.
a in yul said:
will this work on other htc wm phones; ie tilt on TOC 6.5; or tytn on wm 6.1??
Click to expand...
Click to collapse
Sorry for the late reply, found this page on Google.
Download the Diamond .cab. Installed in on my XPERIA running 6.5. It works
D0MZE said:
After a lot of efforts by a lot of people in the Raphael, i want to send a special thanks to Captain_Throwback
I sent him the rilphone.dll used in the diamond Rogers ROM to enable Name Display on my Diamond using Dutty's ROM v.4
With his knowledge he was able to cook a cab with the proper settings to enable name display without having to cook it directly in the rom.
Thats fantastic!
Please post your experience and what ROM you used this on.
Click to expand...
Click to collapse
Finally! Works perfect although many names have an extra "@" sign lol
CNAP working
D0MZE said:
After a lot of efforts by a lot of people in the Raphael, i want to send a special thanks to Captain_Throwback
I sent him the rilphone.dll used in the diamond Rogers ROM to enable Name Display on my Diamond using Dutty's ROM v.4
With his knowledge he was able to cook a cab with the proper settings to enable name display without having to cook it directly in the rom.
Thats fantastic!
Please post your experience and what ROM you used this on.
Click to expand...
Click to collapse
CNAP on my Diamond with Roger's Wireless network is working for me after installing this rilphone cab. Thank you D0MZE, Captain_Throwback and the other contributors.
I have found that generally after flashing a new radio, I need to re-install the rilphone cab for the caller name to show up in the call history list. Also, I have assumed that in order to keep the Roger's CNAP functionality, I need to stay with this rilphone until Roger's issues a newer version. I also don't really like hard resets so I'm being conservative about flashing. So for now, as I experiment with newer radios, I keep using the rilphone cab provided in this thread.
chgrbt said:
CNAP on my Diamond with Roger's Wireless network is working for me after installing this rilphone cab. Thank you D0MZE, Captain_Throwback and the other contributors.
I have found that generally after flashing a new radio, I need to re-install the rilphone cab for the caller name to show up in the call history list. Also, I have assumed that in order to keep the Roger's CNAP functionality, I need to stay with this rilphone until Roger's issues a newer version. I also don't really like hard resets so I'm being conservative about flashing. So for now, as I experiment with newer radios, I keep using the rilphone cab provided in this thread.
Click to expand...
Click to collapse
You can use diff radios with the CAB, but just that sometimes functions in the radio arent implemented in the rilphone.dll which kinda sucks.
For now it will take time until rogers releases another windows mobile phone, so... my opinion is that we're going to have to wait.
Damn rogers.
Concerning the @ sign, it's normal, it just means that the name is longer than what the phone can take.
Has anyone tried this on a tilt with a custom ROM? Tempted to try this...
D0MZE said:
After a lot of efforts by a lot of people in the Raphael, i want to send a special thanks to Captain_Throwback
I sent him the rilphone.dll used in the diamond Rogers ROM to enable Name Display on my Diamond using Dutty's ROM v.4
With his knowledge he was able to cook a cab with the proper settings to enable name display without having to cook it directly in the rom.
Thats fantastic!
Please post your experience and what ROM you used this on.
Click to expand...
Click to collapse
Thks for the work to all;
Matt1408 said:
Sorry for the late reply, found this page on Google.
Download the Diamond .cab. Installed in on my XPERIA running 6.5. It works
Click to expand...
Click to collapse
Just logged on and checked; thanks a bunch; have it working on my tilt on FIDO..!!
super news..!!
Thanks for all the good work! This not only fixes my caller display problem, it also fixes my SMS timestamp problem! Now all incoming SMS's are correctly timed!!!
Rogers Name Display for WM6.5 HTC HD2
It doesn't work for WM6.5 on my HTC HD2, can somebody share rilphones.dll from WM6.5 Rogers/Fido device with me?
Hello everybody,
i've a little problem since I installed EnergyROM Xperia 23001 Standard.
Phone is: SE Xperia X1i
OS is: WM 6.5 Build 21820
Manila: 2.1.38403.2
Radio: 1.16.25.48
I am from Germany so i set my timezone to GMT+1 Berlin.
Now the problem:
Every SMS I receive has a wrong timestamp (2 hours in the future), every SMS i send has the right timestamp. Example:
Me (20:30): Answer me in 5 minutes...
You (22:35): Okay!
Click to expand...
Click to collapse
I already read about the following fixes and applied them:
HKLM\Software\OEM\PhoneSetting\TrustTimeZoneField = 0x00000000(0)
HKLM\Software\OEM\SMS\RecvTimeStamp = 0x00000000(0)
DST-Fix from Microsoft: not available for WM 6.5
Another thing is the SMS popup that is displayed when I receive a SMS: It says "Message from Network" (not Message from [Name] ) and when I press accidentally "Dismiss" the SMS is deleted. (Maybe that error is connected to the timezone problem)
I created a new thread for this problem because I read a lot about this in most ROM threads but I couldn't find a solution.
How can I solve my problem and is it possible that it's the fault of the radio upgrade?
Thanks in advance
diabox said:
Hello everybody,
i've a little problem since I installed EnergyROM Xperia 23001 Standard.
Phone is: SE Xperia X1i
OS is: WM 6.5 Build 21820
Manila: 2.1.38403.2
Radio: 1.16.25.48
Click to expand...
Click to collapse
OS is build 23001, hence EnergyROM 23001
diabox said:
I am from Germany so i set my timezone to GMT+1 Berlin.
Now the problem:
Every SMS I receive has a wrong timestamp (2 hours in the future), every SMS i send has the right timestamp. Example:
I already read about the following fixes and applied them:
HKLM\Software\OEM\PhoneSetting\TrustTimeZoneField = 0x00000000(0)
HKLM\Software\OEM\SMS\RecvTimeStamp = 0x00000000(0)
DST-Fix from Microsoft: not available for WM 6.5
Click to expand...
Click to collapse
Did you set the Timezone in Manila separately? I'm using the EnergyROM 23001 Titanium version and don't have this problem.
diabox said:
Another thing is the SMS popup that is displayed when I receive a SMS: It says "Message from Network" (not Message from [Name] ) and when I press accidentally "Dismiss" the SMS is deleted. (Maybe that error is connected to the timezone problem)
I created a new thread for this problem because I read a lot about this in most ROM threads but I couldn't find a solution.
How can I solve my problem and is it possible that it's the fault of the radio upgrade?
Thanks in advance
Click to expand...
Click to collapse
This seems to be related to the rillphone.dll driver from radio 1.16, try using the radio with the stock rillphone.dll.
If you don't have the rillphone.dll installed that came with the 1.16 radio, try another radio.
gl
Lokatho said:
OS is build 23001, hence EnergyROM 23001
Click to expand...
Click to collapse
Sorry, sounds fine. I searched for the build# in the changelog
Lokatho said:
Did you set the Timezone in Manila separately? I'm using the EnergyROM 23001 Titanium version and don't have this problem.
Click to expand...
Click to collapse
WM and Manila are set to the same Timezone.
Lokatho said:
This seems to be related to the rillphone.dll driver from radio 1.16, try using the radio with the stock rillphone.dll.
If you don't have the rillphone.dll installed that came with the 1.16 radio, try another radio.
Click to expand...
Click to collapse
That's it: I used Radio 1.16 with the rilphone.dll from 1.16.
Downgraded to 1.14.25.55 with the corresponding rilphone.dll and now Timezone-problem and "Message from Network" are gone...
Thank you, Lokatho!
diabox said:
That's it: I used Radio 1.16 with the rilphone.dll from 1.16.
Downgraded to 1.14.25.55 with the corresponding rilphone.dll and now Timezone-problem and "Message from Network" are gone...
Thank you, Lokatho!
Click to expand...
Click to collapse
You can always try the 1.16 radio without corresponding rillphone.dll, solved my "Message from Network" problem.
OMG thank Lokatho alot
hi all, I just flashed the phone to Touch IT Leo 3 and having the same time stamp problem.
the ones I send r in correct time, but the ones I recevie are four hrs in the past.
wondering what I can do to fix this.
I'm in Canada using an UK version X1i. cheers.
Lokatho said:
You can always try the 1.16 radio without corresponding rillphone.dll, solved my "Message from Network" problem.
Click to expand...
Click to collapse
which radio ril work better on 1.16* radio?
I am also in Canada using a UK X1i, messages received are 10 hours in the past...
I tired many roms non have fixed this problem... I appreciate any help that I can get in order to solve this problem.
ookiller said:
I am also in Canada using a UK X1i, messages received are 10 hours in the past...
I tired many roms non have fixed this problem... I appreciate any help that I can get in order to solve this problem.
Click to expand...
Click to collapse
hey man, i tired tornado storm, and that's the only rom with the correct time stamp, however, i didnt like it at all, so after a few hrs i flashed to Touch IT Leo 3 , tho this one looks good, it HAS WAY TOO MUCH problem, extremely buggy. the only reason I tried custom rom is to fix the time stamp problem but after so many different ones, I realize the factory Xperia has the best interface and worked so MUCH BETTER than anything on any site. I wish I could go back. haha
oh the other thing I think might work but wasn't able to is to flash the phone to Canadian Official rom, that way the phone would be synced with the local network and specs. I tried to do that but all of the official roms are in Img file instad nbh, and I have no way to convert the files, dont know if anyone could help. cheers.
HMtheJJ said:
hey man, i tired tornado storm, and that's the only rom with the correct time stamp, however, i didnt like it at all, so after a few hrs i flashed to Touch IT Leo 3 , tho this one looks good, it HAS WAY TOO MUCH problem, extremely buggy. the only reason I tried custom rom is to fix the time stamp problem but after so many different ones, I realize the factory Xperia has the best interface and worked so MUCH BETTER than anything on any site. I wish I could go back. haha
oh the other thing I think might work but wasn't able to is to flash the phone to Canadian Official rom, that way the phone would be synced with the local network and specs. I tried to do that but all of the official roms are in Img file instad nbh, and I have no way to convert the files, dont know if anyone could help. cheers.
Click to expand...
Click to collapse
Sorry for the late reply, Yea Im not really liking my xperia no 3g and so buggy... Where are the Canadian roms?
Using Manila 2.5
i also have sms time stamp problem ,
is there any way that sms uses device time instead of network time???
and i dont find these registery entries too:-
* HKLM\Software\OEM\PhoneSetting\TrustTimeZoneField = 0x00000000(0)
* HKLM\Software\OEM\SMS\RecvTimeStamp = 0x00000000(0)
* DST-Fix from Microsoft: not available for WM 6.5
Regards
newstar said:
Using Manila 2.5
i also have sms time stamp problem ,
is there any way that sms uses device time instead of network time???
and i dont find these registery entries too:-
* HKLM\Software\OEM\PhoneSetting\TrustTimeZoneField = 0x00000000(0)
* HKLM\Software\OEM\SMS\RecvTimeStamp = 0x00000000(0)
* DST-Fix from Microsoft: not available for WM 6.5
Regards
Click to expand...
Click to collapse
If the registry entries dont exist, make a new entry with the same settings
SMS Problem
Hi there,
I have the sme problem, I have a Canadian ROM and I have the same problem when receiving SMS.
The SMS time stamp show the time in the future (like if I was in Europe)
I had a P1 before and I had exactly the same problem..
Try this SMS Timestamp fix cab. I also have a Canadian phone.
anyone running this OS on their Diamond? If so, please link to download, and provide details on if it works well, smoothly, bugs, etc. I have searched but do not find a hardspl for my cdma diamond.
my understanding is I need to:
1. download 6.5 hardspl for Sprint cdma diamond
2. update the rom after the hardspl is loaded
Please correct me if I am wrong.
Thanks
There out their! LOOK! MightyROM is so far the best you just need Fave People, the picture mail app that sprint didn't make, and change the location the photos save at to using advance config
agentmikeyd said:
anyone running this OS on their Diamond? If so, please link to download, and provide details on if it works well, smoothly, bugs, etc. I have searched but do not find a hardspl for my cdma diamond.
my understanding is I need to:
1. download 6.5 hardspl for Sprint cdma diamond
2. update the rom after the hardspl is loaded
Please correct me if I am wrong.
Thanks
Click to expand...
Click to collapse
I am running Calkulins Ver. 4, and loving it.
agentmikeyd said:
anyone running this OS on their Diamond? If so, please link to download, and provide details on if it works well, smoothly, bugs, etc. I have searched but do not find a hardspl for my cdma diamond.
my understanding is I need to:
1. download 6.5 hardspl for Sprint cdma diamond
2. update the rom after the hardspl is loaded
Please correct me if I am wrong.
Thanks
Click to expand...
Click to collapse
Man ... get yourself over to PPCGeeks and the Diamond upgrade forum. Plenty of info and roms to choose from.
note: the forums have been up and down the last couple of days, so you may have to wait until the issues are dealt with.
wmdunn said:
Man ... get yourself over to PPCGeeks and the Diamond upgrade forum. Plenty of info and roms to choose from.
note: the forums have been up and down the last couple of days, so you may have to wait until the issues are dealt with.
Click to expand...
Click to collapse
Precisely.
My favorites would be
STX
Mighty 6
Demolition
SSK
in that order as far as 6.5 is concerned. For 6.1, I would say Mighty 4 and intx 2.5 or premiere.
im running EnergyROM and love it
I'm on Mighty Rom 6, but the battery drains quicker than my stock rom. Any idea why?
Forgive the noob question but...If I install a cooked ROM on my Telus Diamond will I still have Telus functionality as in cell service, etc? Would Telus be able to tell and then cut my service or something? What would be the ramifications of installing another ROM? Other than the risk of bricking my device what, if anything, would I lose.
expire in 30 days
got it running great thru juicy rom , 6.5 is awesome, but says will wm6.5 pro will expire in 30 days. What?!?