Related
Is there someone who can help me to download the i-Mate patch?, I have a Qtek 9090 so I can't download it :evil:
http://www.clubimate.com/index.asp?PageAction=DEVICE_PDA2K_BT
Please send to [email protected] (Thanks in advanced)
BT Patch
Please if possible email me the patch as well.
I have a Qtek 9090.
email: [email protected]
Thanks in advance!
And....... if i can do something back. Let me know!
You can logon to xda-developers.com for download....
http://forum.xda-developers.com/viewtopic.php?t=12908
But I tried the patch and feel no any improvement in BT.
qtek 9090 bluetooth patch
Hye everybody
Please, me too. I need it. I tested all headsets on the market. The best for me is the nokia hdw3. But a lot of noise if i am not just behind the unit.
Please mail me the patch(s).PLEAAASSSEEEEE
here is my mail adress: [email protected]
THANKS A LOT
Patch bluetooth
Can you please send it to me also. I also have a Qtek 9090.
[email protected]
Thanks
Dominique
BT update
Hi all,
Please e-mail to me too.
It is a mess to work with BT on original version of the Qtek 9090
e-mail: [email protected]
Thanks a lot,
Alex
Hi all,
Why using your private email address? Please post that patch on a public site, so everyone can use it!
Sam
Bluetooth stack
The upgrade will not help at all....
However......
I got my boss the Verizon XV6600WOC and it has the same Bluetooth stack just version 2400 instead of 2200.
What stack versions are you guys working with?
Now I just need to rip the bluetooth files out of it. If i find any success in getting his bluetooth stack version on to mine, I will post the files and instructions here.
BTW: His stack HAS to be better since we both have a Jabra Freespeak 250 and I have a HBH-200 and his bluetooth headsets work flawlessly with absolutely zero crackling or interference
It's not worth posting... but here it is.
ed, yes! get his build 2400! that would absolutely rock. I've heard great things about it.
Roadblock
I dont have any tools to extract ROMS, files, etc. from Blue Angel's or Harriers
Before my PDA2K I had an SX56 from Siemens, now THAT I can do just about anything with at this point.
I need the tools to:
Save the ROM and extended ROM with Activesynch and to be able to extract the files from it
Just posting to keep this thread current and at the top of the page
Can anyone provide assistance on how to extract the Bluetooth stack from a Blue Angel to a format which can be inserted onto another device?
If what's being discussed here is true, the BT stack in Verizon's Blue Angel could be the solution to the BT problems with the other models like PDA2k, MDA III, etc.
Thanks!
Progress
I have good news and I have bad news and then I have some more good news, but not today.
Good News - I was able to get a lot of the files off the XV6600WOC and some of the extended rom cabs.
Bad News - 3 files are protected somehow and I cannot copy them with the device on. BTCESTACK.DLL, BTCEPROFILES.DLL,BTPANMANAGERCE.EXE
Delayed Good News - There is a good chance that I might be getting an additional XV6600WOC unit that I can do a proper rom dump on and post it here on the 15th.
I will post 2 attachements. One is the bluetooth files, the other is some of the extended rom cabs after I unlocked it. I was not able to get the unit in my hands long enough to get them all, the guy had to leave. Also, a proper rom dump was not possible, since he had all his programs and data installed.
Hope these files help somewhat.
Extended Rom Cabs for XV6600WOC
Here are some of the extended rom cabs
Awesome. Thanks for getting what you could, Ed. I will play with them a little later tonight. Thanks again!
Re: Progress
Bad News - 3 files are protected somehow and I cannot copy them with the device on. BTCESTACK.DLL, BTCEPROFILES.DLL,BTPANMANAGERCE.EXE
Click to expand...
Click to collapse
Off BT.
Move BTTrayCE from /Windows/StartUp folder to another location.
Reset.
Copy the 3 files.
Relocate BTTrayCE back to /Windows/StartUp folder.
Reset.
Hope this works Bro.
I copied the bt files you posted to the c:\windows directory.
For a quick 2 minutes test I noticed the phone still turns on every 30-60 seconds or so after I make a call via the bt headset. We may need those 3 other files (if not more) after all.
ok, I downloaded http://www.asukal.jp/BT_Headset.CAB which replaced the files you were unable to extract with the bt 1.6 stack. So far so good. I will test it and let you guys know.
outz said:
ok, I downloaded http://www.asukal.jp/BT_Headset.CAB which replaced the files you were unable to extract with the bt 1.6 stack. So far so good. I will test it and let you guys know.
Click to expand...
Click to collapse
Regarding the files you got out of the above CAB file:
Are they the same version as the files you couldn't extract from the XV6600WC? If not, this could cause big problems.
Just a friendly warning; let us know how it goes.
nah, the cab above is not the same version. it worked none-the-less. i seemed to have gotten more auto turn ons with the cab, so i now reverted back to my pda2k's original 2200 stack with the verizon files he posted above. I definately notice the phone syncs with the bt headset much quicker, and so far hasn't lost connectivity with it. I still hear static when im only 5 ft or so away from it. (its the sony ericsson 660) I didn't get this with my old moto headset.
Firstly let me start by apologising if this thread has been covered before but I'm new here and Im new to my xdaIIi.
I have just bought a o2 xdaIIi and I cannot get the bluetooth to work and link to my tomtom go 500 to allow it to work as a handsfree.
I've done a quick scan on here and it seems this is a common problem but any links to ROM updates or radio updates for the Apline no longer work on the FTP page.
Can any ony point my in a direction that will make my xdaIIi bluetooth work?
oh and dont get me started on how unstable all the software is on my xda!
Probably not what you want to hear.....but....from what I have read on another forum the XDA2i is not compatible with TT 500 or 700 for BT connections, there are only a few devices that they do support. Try the TT site to check.
Howdy all!
Just found the forum via a Google search and was wondering if anyone can help - MANY apologies if this problem has been posted elsewhere (im a newbie here so please be gentle!), but ive just had a look but couldnt find anything......so here goes...
I've just got myself a XDA 2i today and having active sync'ed Tom Tom 5.1 to it i've come across a "program may not run correctly as its set up for older software" message. After running TT anyway it does indeed start, but cant seem to connect my wireless GPS receiver to it, and im just worried (having read elsewhere here) it could well freeze up in use if i perserve with it. Anyone have any advice?? Please??
I have a XDA 2 and my Tom Tom 5 runs perfect on it.........but am now left considering selling this new 2i on eBay (instead of the other one i'd intended) as i just want something that works. Can anyone help? Im just looking for some simple advice..........id REALLY appreciate it
Thanks in anticipation ............
Ant
Ps, I guess my main issue is just advice whether i should perservere with the XDA 2i (i just want Tom Tom to work!) - or sell and just stick with the XDA 2 that 'seems' to be less problematic. Im soooo desperate.........help!
Upgrade to 5.21
I'm not familiar with the Alpine but one thing that you should be doing for sure is to install the upgrade to 5.21.
Hope this helps!
Connect Tom tom Wireless Bluetooth GPS
Hello
I had TomTom installed in my Qtek 2020, and it worked.
I had a problem at first. I wasn´t able to connect with my wireless Bluetooth Gps, but then i set up the connection by setting it as "other NMEA cable GPS", strange, but it worked. I never could connect it as a "Generic Bluetooth Gps". I have a Pretec Gps Mini
I hope it works
Have you made sure "Receive all incoming beams" is NOT ticked in the settings - connections - Beam - menu? that is the normal culprit that we all forget!!!
Thanks SO much for the help guys....the 'incoming beams' thing did the trick......and it now recognizes TT5. THANKYOU!! Here's hoping it doesnt freeze up on me....! :?
With regards to the updated XDA2i not being compatiable with 'the older software im trying to run' would anyone recommend getting rid of it and sticking with the XDA2? The 2i is certainly the business with wi-fi, etc....but having uploaded a Commodore 64 emulator from Clickgamer (and having the same message pop up) i just dont know if im going to run into any other issues with this newer version of Windows its running. Any help would be really appreciated....thanks again :wink:
I would not worry about that pop up, it does it with loads of programmes, my 2i is very stable with tt5.2, even when using the phone via a BT headset and I have other programmes running in the background - the choice is SD card is more critical - Transcend 80x's seem to be the most stable. :lol:
Excellent...thanks for the advice!
Btw, just noticed the 'radio' thing in your signature......is it part of a download for the xda? Any other websites you'd recommend? My 2i is brand new out of the box and needing some cool gadgets put onto it! 8)
Thanks (again!) for all the help :wink:
Theres some good stuff on this site pdagold
It is freeware as well.
As for the Radio, I, along with many others have upgraded to Pugs rom, this seems to be the most stable one around, you can get it from the FTP part of this site, then just follow the instructions to reflash your rom.
a MASSIVE thanks for this.........sorry to be such a newbie, the advice here has been fantastic. Thanks alot!! :!:
i recommend pugz rom
i was using the o2 rom with tomtom 5.1 and and i kept loosing connection also had bluetooth issues, once installing the cooked rom, i've not experienced any problems
damned tt5.21
the problem is that I'm trying, at least, to let the O2 2i working with tomtom5.21 and fortuna clip-on gps receiver...
I read a lot of posts, so my beam settings are ok...
seems that tt5.21 don't want to communicate with the gps.
In fact the gps fixes (red light), but tt5.21 don't want to see it. It continue to say "no gps receiver", "signal lost from..." or, in the configuration, "Gps signal not good (or something else, I'm translating from italian)", and the small circle on the left up corner rolls, rolls, rolls...
so has any ideas? I'm not sleeping since 4 dayz....
tnx for all
pugz rom?
and where can I dl it? can so plz post me a link? tnx
*ant if you have problems with tomtom locking up swap sd card for a mmc card I was having problems with mine have had no lock ups since I changed to mmc
sexyali said:
i recommend pugz rom
i was using the o2 rom with tomtom 5.1 and and i kept loosing connection also had bluetooth issues, once installing the cooked rom, i've not experienced any problems
Click to expand...
Click to collapse
would u mind to tell us where we can download latest pugz rom ? thanks !!!
couldnt find new posts - found now - wasnt able to delete message - confused.com??
Hi *Ant
I have used tt 5.1 5.2 and now 6.01
With both tt 5s on SD card I had frequent freezing, but since changing to an MMC card it has worked with ought a single glitch.
I LOVE my XDA 2i
Good luck
spanners
hey do you know you can update your xda2 to xda2i and tomtom 6 2ill work fine . yes you have to untick beams...
upgrade
http://buzzdev.net/component/option...94/index.php?option=com_remository&Itemid=100
I am thinking of buying Breeze/MTeor but I wanted to get users opinon on the phone, things that I would like to use:
Pushmail, Naviagation.
Things I wanted to know about was:
1 - Does the phone freeze or hang ?
2 - Is there any problems where you miss alot of phone calls (had this issue on HTC TyTn)
3 - Does it work fast enough, navigating through menu and apps ?
4 - Will I be able to use TomTom ?
5 - If anyone has experience of Pocket PC, what the difference you find with Smartphone version ?
Thanks in advance.
Hi,
first you could read the Wiki (Review's) maybe help you too!!
second:
i had an TyTn before the MTeor!
had also many problems with the tytn ... but most of them in wm5 ... with wm6 most is gone...
i had no phone hang yet on mteor! no calls missed ... i didn't expect any problems so far...
speed is very good! (is the only sp with a 300 mhz cpu) !!!
you are able to use tomtom!
once there is an special smartphone tomtom edition you also can use the pocketpc version! there is a programm called PSHelper with that programm you can act with the d-pad like you have a touchscreen (with a mouse coursor!!)
the differences between the ppc and sp are the missing of a touchscreen!! but as you can see on tomtom with pshelper there is also not a big problem!
some apps did not work on sp ... like the game worms... there are some special smartphone versions of apps out!!
for software just look in wiki!!
also theres a bit difference in the today screen but nothing big.. you did not have such plugins like on the ppc ... just browse the web for sbsh facade or look in to wiki i have attached a screenshot in the skin section ... there you can see the agenda software...
Thanks, I did look through the Wiki and the forum before posting.
I cannot find anything about PSHelper searched google too, do you have a link ?
I sold my TyTn and went for a treo 750v which I really do like, but I want to go to a smaller phone but keep alot of the functions, and the MTeor seems to be the perfect solution.
Which version of TomTom are you running, I have version 6 I use on my treo can I use this with PSHelper ?
Hi,
sorry my fault program calls sphelper
http://www.bobsoft.com/sphelper/
i used it with tomtom5 and 6 theres no difference...
simply explained... the programs that are written for ppc waits for input on screen! but you cant do that on a smartphone...
so the mouse cursor does that for you!!
for me the mteor is the best solution... it is a phone with pocketpc funktionalities!!
i have loved my tytn but the size and weight ....
if you want a slideout keyboard i prever you to wait for s730 ? because s710 has the slide out keyboard but the "slow" omap cpus ....
s730 with keyboard starts looking like my TyTn I think I'd be happy with the MTeor and hopefully with the new versions you mentions, should mean the MTeor resale price should be coming down, works for me.
1 - I haven't had any problems with the phone hanging.
2 - I have huge problems, especially when roaming, that the phone looses the connection to the network - even if the signal strength is good. Others have had a better experience.
3 - I find it fast enough.
4 - Only Tomtom mobile 5 will work. Tomtom navigator 6 is only done for PPC.
5 - I will be going the other way soon, getting a 3600 instead. I've never used a PPC yet.
staffann said:
4 - Only Tomtom mobile 5 will work. Tomtom navigator 6 is only done for PPC.
Click to expand...
Click to collapse
!!! try to use sphelper, very cool !!!
i have bought my mteor for 320€ new without an provider ... i think thats not so bad... i have payed 500€ for the tytn ... for quite an year...
futureshock said:
!!! try to use sphelper, very cool !!!
Click to expand...
Click to collapse
I did some time ago. Cool maybe, but I find the resulting user interface (TT6+sphelper) almost unusable anyway. Maybe I should have written that TT6 doesn't work very well with MTeoR since TT6 is written for PPC and not smartphones. It can be made to work, barely.
Alright at last I won myself a Mteor on ebay, waiting for delivery hopefully Thursday, can't wait
So tomtom5 runs without the need for sp helper, tomtom6 you need sp helper is that right ?
Does it really make it unusable ?, Is sphelper always running? does it slow down the phone at all ?
tomtom6 you need sp helper is that right ?
Click to expand...
Click to collapse
yes
TT5 has a smartphone version and pocket version, but TT6 is pocket only. So you need rather additions to run pocket software like TT6
Is sphelper always running? does it slow down the phone at all ?
Click to expand...
Click to collapse
you need run it only when you want to use TT6
So should I just use TomTom Mobile 5 which was made for smartphone? (I take it voices is a problem)
Is there any benefit of using TomTom 6 ?
TT6 has much better maps.
Note: TT 5.200 is the lowest version you need.
Hi there,
I'm new here, since I just got my new HTC Tytn II and registered here for info etc.
Although the Tytn II did replace my old Nokia 6680 and iPaq H3970 for some functions, I can't get it to work with my TomTom Rider 2nd Edition Europe.
I used the TomTom Rider with my Nokia to be able to make and receive phonecalls while on my motorbike.. always had fun with it. But now.. sigh!...
I tried everything, installed the BT_DUN.cab and copied the modemlink files into the Windows folder of my Tytn II.. but no results..
is the WM6 + Tytn II combo crap or is there another workaround/fix update orso?
Thank in advance..
Little_Bear
Tested the Kaiser with a Garmin Zumo tonight.. worked flawlessly.. so should be an issue with TomTom?
Anyone? plzzzz...
Seems like I stand completely alone in this issue.. although.. on the forum here..
I have been calling with TomTom support for a few times.. and they are not giving any comment on this problem. I talked to a supervisor of the support-department and he said the development department wo'nt give any information about if they are working on this not-want-to-pair trouble with the TytN II and TomTom Go-Rider combo.
Since the TytN II does pair with a Garmin Zümo and even the phonebook synchronisez perfectly (where most of the Symbian phones don't) I also talked to the Dutch HTC support department about this if maybe they could work something out.
Garmin did provide a softwareupdate for their Zümo devices, where before that time the TytN II wouldn't connect to the Zümo as well.
Anyone with enough technical knowledge who has ideas about this? I really don't like to sell my Rider 2nd Edition for only maybe 200 Euros and have to buy a brandnew Zümo for 575 Euros, where I still have to buy an optional bluetooth Cardo Rider for my helmet, since TomTom Rider comes with one.
Anyone?
Tried everything so far.. nothing..
I just can't believe this sjit.
always best to do trial and error with gps providers before sticking to 1 or 2 and forking money over for nothing