Replacing Video Dialer Skin - Tilt, TyTN II, MDA Vario III Themes and Apps

Im not a big fan of the video dialer on Dutty's Rom's. I attempted to replace it but no dice.
I would like the black dialer as shown here:
Tried installing cab, but after soft reset Dutty's red kaiser dialer still there.
Tried wiping out folders in registry HKLM/Software/HTC/PhoneCanvas and HKLM/Security/Phone/Skin and reinstalling cab and still no dice (Prolly shouldn't a done this but found these keys on the Athena form, so thought i would give it a try). Now Dutty's Kaiser dialer is gone, but with phone skin enabled or disabled shows standard dialer.
Any one replaced a video dialer skin with another video dialer skin? What am I doing wrong? Any hints?
* I have attempted several searches through the forms all turning up mostly goose eggs for swapping video dialer skins. I see no guides or wikis for this.

Poor xcuse for a BUMP!
Beuler...
Beuler...
Anyone...
Anyone...
C'mon someone out there knows where I should look for this answer... Someone has to have modded their video dialer. Should i try to ask about this in General?

I
Guess no has done this...
Too Bad! I'll do some more digging of my own on the topic. If anyone can think of anything at all, be sure to drop a line, I'll be more than happy to look in any direction that you may point me.
Thanks!

Saturday November 17 2007 update:
Note: Newer HTC models (HTC Tytn II / Kaiser and HTC Touch) have their own custom dialpads, these skins aren't suitable for them. Do not install! You might have to hard reset if you cannot remove these skins via remove in settings

I've been digging in this as well but no luck... I Bricket my device once or twice trying to solve this.
There's loads of dialer skins but most without or no working video.
The skin you found look awesome so if you get it working plz let me know.

@jamorgan2008
you can try before installing an alternative dialer following.
1. Set the key in the registry HKLM\Security\Phone\Skin\Enabled to "0" to disable video dialing function.
2. SoftReset
3. Install other dialer
4. SoftReset
5. That´s it
I had same issue on my Kaiser, but after that it works as expected

Related

Need Help with Calculator

Hi
I just got my Diamond, as ussual comes with the rubbish WM Calculator, so I thought I'd update it to the HTC skin which I also did on my Orbit 2, Only problem it doesn't work on the VGA, so I uninstalled but now my original calculator doesn't work any more?
What can I do?
Cheers
Richard
hard reset is my thought.....or you can try searching for the original calculator cab.....i'm sure it's on the forum...
Just pulled the batt out while on, assuming thats a hard restart. Still the same.
This is the error:
The file 'calc' cannot be opened. Either it is not signed with a trusted certificate , or one of its components cannot be found etc...
Couldn't see an original CAB for VGA device?
well read in the book to find out how to do a hard reset on the diamond.(i don't have one so i doon't know i'm just trying to be as helpfull as possible since this thread will probably almost be ignored) a hard reset is like a format of your phone to bring everything back to the defaults.....or you can use the search function of the forum to look for the original HTC Diamond calculator cab file......
I happen to be at work, I don't have the manual to hand, why would this be ignored anyway I thought this was the place to find friendly help! I always thought a hard reset was just pulling the battery while switched on but that does not restore default settings. Anyway I have just managed to fix it, I found a cab file called Microsoft calculator.cab and it has restored it.
Thanks anyway but no need to get funny about it!
was not trying to be funny....was just saying that this developer site sometimes ignores little threads like this....a missing calculator is not a big concern to devs....anyways i'm glad you got it working...i knew theire had to be a cab file for the calc somewhere on here.
Still, can the default WM6 calculator be skinned? Looks horrid compared to the rest of the interface
i'm wondering the same thing.. this calculator needs a new look
btw, hard reset is volume down + enter key + reset
richardirv said:
Anyway I have just managed to fix it, I found a cab file called Microsoft calculator.cab and it has restored it.
Click to expand...
Click to collapse
Hi richardirv
I have exactly the same problem and would prefer not to do a hard reset unless absolutely necessary.
Is there any chance you could tell me where you found the Microsoft calculator.cab ?
Thanks in advance
My Calculator is Gone as well!!
If you (richardirv) could please post were you found that ms calculator cab it would be appreciated by many!!
I have been searching for a while to a fix for this. I too tried installing the HTC skin and did not work. When I uninstalled it the calc.exe file was gone leaving me with no calculator.
I have many custom settings and programs and would hate to do a hard reset for a calculator.
Thanks a bunch in advance!!
HTC Touch Pro
WM 6.1
nevermind richardirv
found it!!: http://forum.xda-developers.com/showthread.php?t=399943&highlight=Microsoft+calculator.cab
thanks to TheOne_ for posting it!!

MDA Compact IV - let the debranding begin

Please use this thread to post direct links to original HTC Stock ROMS for debranding of MDA Compact IV,
Unlocking software,
Original black theme and wallpaper
You tube app
Windows Live Messenger
Etc..
Please share the wealth all..
well i will be using this guide:
http://modmydiamond.info/index.php?option=com_frontpage&Itemid=1
and applying this ROM:
http://forum.xda-developers.com/showthread.php?t=407572
not sure about the Messenger cab, but i'm sure you can find a version on this site!
Black Manila theme here:
You Tube app is missing and a CAB is needed desprately. Can anyone help?
no response?
So I guess you compact IV owners dont want the You Tube and Windows Live Messenger apps?
Are you loking to just de-brand?
Have you applied the balck manilla yet? any good?
Mine has just arrived to just having a play... the browser is unreal!
not sure whether to apply a new rom yet
selspiero said:
Are you loking to just de-brand?
Have you applied the balck manilla yet? any good?
Mine has just arrived to just having a play... the browser is unreal!
not sure whether to apply a new rom yet
Click to expand...
Click to collapse
Applying Black Manilla works just fine. However start menu is still T Mobile white. Even beaming across the original HTC Black theme and choosing that makes no difference.
However Im looking for Windows Messenger (the latest CAB on this forum didnt work) and You Tube App.
hmm i thought the start menu was just part of the theme file...
skin
I want to thank the poster of the manila theme!
I was Looking for this theme, cause the T-mobile theme with the pink logo's was so girlish
Also for other installers, during the install every thing went fine till it restarted. I looked like the phone started correctly, i heard bleeping and it shaked, but the screen was gray with borders.
After that I thought I messed something up, and tried a soft reset, after that it worked like a charm!
ok after lots of atempts i think i have got my compact to a state where you could call it de-branded??
i have got the black manilla theme from the diamond which is allot better than the pink and white! i have got windows live with messenger installed and working nicely, and i have finally managed to get the youtube app on it aswell, so apart from that is there anything else which needs to be changed software wise??
anyone else had any success with this? i know i could just flash another rom but i really want to stay under warranty
Cheers guys
Care to Share...
How You did it... step by step.
Speaking of warranty, I’m in the same boat. I got no issues of changing the ROM as long as I can get back if I need to.
We really need a copy of the T-Mobile Stock ROM!
i would also be very interested in knowing which version of messenger you got to work and where you located it
I know i can flash a different rom but don't really want to until a copy of the original t-mobile rom is available, just in case i need to revert back for warranty purposes.
how i installed Windows Live Mobile...
Okay guys bare with me and let me know if you have any success with this.....
firstly for Windows Live Mobile, i have tried loads of different cabs to get this working, but this has seemed to work for me,
1) install "Windows Live install 1st.cab" then soft reset, once you reset you will have windows live installed but there will be no messenger this should be fine if you just want hotmail.
*****make sure you dont uninstall the 1st cab! they both need to be on at the same time to work!*****
2) install "Windows Live install 2nd.cab" and again soft reset, once you reset you will have all of windows live including messenger just as it is on the stock diamond rom same version im pretty sure!
Windows live is now good to go! over wifi it will sync flawlessly, over gprs/3g it will be hit and miss, as it has been on every other device with wm6, Windows live mobile and T-mobile, i always get my emails however it will sometimes show a sync error aswell. (let me know how you get on here because i have had this connection issue with my last couple of phones!)
i take no credit for any of these files, they are already on this forum and i thank the guys who uploaded them first time around!
Original TouchFLO....
To get the original colours back into touchFLO i used the theme which was posted earlier in this thread on the first page, this does take up about 9mb of space though! however looks far better than the pink and white!
to change the start menu picture go to Start>Settings>System>TouchFlo and de-select 'Enable Large Start menu' this will then give you what ever themes your using start menu, however it wont be as large!
craigwn said:
ok after lots of atempts i think i have got my compact to a state where you could call it de-branded??
i have got the black manilla theme from the diamond which is allot better than the pink and white! i have got windows live with messenger installed and working nicely, and i have finally managed to get the youtube app on it aswell, so apart from that is there anything else which needs to be changed software wise??
anyone else had any success with this? i know i could just flash another rom but i really want to stay under warranty
Cheers guys
Click to expand...
Click to collapse
How did you get the you tube app to work?
There is a youtube VGA cab on this forum, which installs - however whenever you attempt to play a video there is an error message
Finally Youtube!
this was the most annoying one!
okay to install this...
1) Install "AdobeFlashLite.cab" this may or may not be required? however i installed it and everything works fine! maybe someone could try with out this and see if it still works.
2) install "HTC YouTube install 1st.cab" this will install the youtube app however it is a qvga version and looks rough on the awesome vga screen and everything is all over the place, however still works fine.
3) unzip the contents of "HTCYouTubeVGA install 2nd.zip" to your \Windows\ directory ensuring the files do go into the windows directory and not into another folder inside the windows directory i.e \Windows\HTCYou... you will be promted if you want to overwrite some files, you have to overwrite all of the existing 200 or so files!
4) do a soft reset for luck and you will now have the full youtube app aswell! exactly the same as on the diamond, i cant remember if i had to create the shortcut to the youtube app myself or if the cab did it, if you have to do it yourself the application is called youtube.exe and is in the \Windows\ folder!
Again all of these files have already been uploaded by others elsewhere in the forum! i have just got them all together, so a big thankyou to all of those members!
let me know your results
Cheers
I also did change the "on-pink" in the connection manager, this was on a dutch t-mobile device but it will probally also work on uk-versions. Just put these 2 files in the windows map with total commander or some other file manager.
Another thing I did was a hard reset and just before the branding kicks in a soft reset. You'll get a pretty clean phone, only some programs aren't installed like tf3d. For tf3d I downloaded the black manila from this thread http://forum.xda-developers.com/showthread.php?t=408843&highlight=boinger66+black. Opera is also not installed so I will also try to install this from the same thread and give it a go.
Also you can remove the t-mobile connection button on the tf3d interface by using removing globe.cab from this thread http://forum.xda-developers.com/showthread.php?t=406681
Cheers to craigwn for the windows live messenger and youtube posts - all cabs installed straight away and with a soft reboot between each one, now both apps work great!
One small thing - I installed the youtube, wlm and then the manila theme and have just realised all my contacts have disappeared. Not sure which one of these have done it (or a combination) as I didn't check in between, but will just get them back via activesync so no problem.
glacieruk said:
Cheers to craigwn for the windows live messenger and youtube posts - all cabs installed straight away and with a soft reboot between each one, now both apps work great!
One small thing - I installed the youtube, wlm and then the manila theme and have just realised all my contacts have disappeared. Not sure which one of these have done it (or a combination) as I didn't check in between, but will just get them back via activesync so no problem.
Click to expand...
Click to collapse
i think this may have something to do with wlm, if you choose to sync contacts, it messes with the phones contacts aswell! just uncheck the option to sync contacts in the future.

Alternative phone dialer skin? (must be VGA of course)

Disabling the dialer skin on the Diamond made me gain 10MB RAM and made the device much more responsive.
But, it also decreased the visual quality considerably. Default WM phone skin is ugly.
My question is, is there a way to install a skin that looks better and still does not waste much RAM?
I remember trying many dialer skins on my original Touch, but none of them were VGA.
i am interested in a new phone dialer. I installed some dialer in my htc p3300 and run very well, including the smartdialing. it would be possible to install a new phone skin dialer with the old smartdialing to the diamond?, i think the only problem is to find one with smartdialing, vga grafics and videocall.
thank you.
There are dialers with smart dialing, but so far none for VGA.
I'm surprised more people aren't interested in an alternative considering the default dialer takes 10MB RAM for nothing.
also looking for a phone skin that is vga for diamond. i too felt my device runs better with the diamond phone dialer disabled, but would like a different look to the windows version.
many thanks
Looking for subj, too
Wow - 10 mb. Thinks i shall disable mine...
Here, not sure if it helps but skins for standard wm 6 dialer. One looks just like it was made for diamond (remove the $ signs) 4$p$d$a.ru/forum/index.php?showtopic=78093&st=450
Removing the diamond dialer will also disable the incoming call screen?
Yup, this disables the incoming call screen too. Would really like a new dialer skin
Where does the 10mb come from?
Graphics? Can we not compress these graphics so when the phone is about to ring, it doesnt have to load up as much graphics etc. Might make it more responsive to incoming calls.
If the 10mb is from extra functionality then i suppose were stuck unless theres another dialer.
Is there a VGA skin for S2u2? i always use to use the incoming call screen from s2u2
So how about disabling the diamond dialer skin, and using a skinned s2u2 incomg call screen? Then im sure theres a standard dial pad skin to look like the diamond.
So vga diamond lookalike s2u2 skin??
I've tried all the phone dialers I found with google... nothing worked so untill HTC makes a good phone dialer with no 3 sec delay I'll stick with the default windows dialer and with a tweak the 3 sec is gone (only with wav files)
vibecatalin said:
I've tried all the phone dialers I found with google... nothing worked so untill HTC makes a good phone dialer with no 3 sec delay I'll stick with the default windows dialer and with a tweak the 3 sec is gone (only with wav files)
Click to expand...
Click to collapse
could you explain this tweak please? I have tried so many dialer/skin combos for VGA Wing and it drives me nuts that even at XDA there is no great dialer available.
I'm looking for large keypad and something other than black-this, black-that. I've seen the manilla dialer skins but they don't work too well for vga. but still, as for dialer software itself, I too add my name to this list of people still wishing to find an alternative.
There's a .cab file for WM5 wich works on WM6.1 that disables the 3 sec delay only if you use the default dialer ( wich is very ugly and I don't like it) and .wav files.. but I got a problem after that , when ringing the ringtone was very choppy and with interuptions... I did an Hard Reset ... and I'm waiting for a new dialer
vibecatalin said:
There's a .cab file for WM5 wich works on WM6.1 that disables the 3 sec delay only if you use the default dialer ( wich is very ugly and I don't like it) and .wav files.. but I got a problem after that , when ringing the ringtone was very choppy and with interuptions... I did an Hard Reset ... and I'm waiting for a new dialer
Click to expand...
Click to collapse
disable diamond phone dialer will disable video call too..thats not a good idea
vibecatalin said:
There's a .cab file for WM5 wich works on WM6.1 that disables the 3 sec delay only if you use the default dialer ( wich is very ugly and I don't like it) and .wav files.. but I got a problem after that , when ringing the ringtone was very choppy and with interuptions... I did an Hard Reset ... and I'm waiting for a new dialer
Click to expand...
Click to collapse
The tweak also works with the HTC dialer.
http://forum.xda-developers.com/showthread.php?t=419333
chasist said:
disable diamond phone dialer will disable video call too..thats not a good idea
Click to expand...
Click to collapse
Well, I am using video calling quite ...
...
never
Disabling the phone skin also disables being able to raise or lower volume during calls.
that figures , have been trying to figure out how to do that ...
You can remove the HTC Volume Control with this cab here:
http://forum.xda-developers.com/showpost.php?p=2718080&postcount=7
This will allow you to change in call volume again.
I too am looking for skins for the standard WM6 dialer - the default grey is ugly.
I found this thread with some skins that are perfect, but they're all QVGA...
http://forum.xda-developers.com/showthread.php?t=295951
Has anyone been able to find any VGA skins?
how to disable the htc dialer?
BelugaHval said:
how to disable the htc dialer?
Click to expand...
Click to collapse
You can do it with Diamond Tweak or Schaps Advanced Config. The Volume control needs the cab linked above.

Fixed Keyboard/Touch screen and more ATT Tilt

*Second post is a quick tutorial of all the steps I did*
For the past year+ I lots of problems with my tilt. Terrible keyboard response problems, like the keyboard only working 25% of the time. The touch screen being unresponsive or slow 50% of the time. I've hated my phone. Thought it was just a piece of junk. I soft reset so much I thought the reset button was going to fail.
I tried nearly every new ROM that came out, each time after being dissapointed because my problems remained, then I'd move on to the disable xt9 cab, tilt keyboard fix cab, keyboard speed up cab (which I'm still not sure if works, since I now have my initial keyboard delay set at 0 and I don't know if I see a difference), etc. Tried the touch sensitivity registry edit, installed the (I think) x1 touch sensitivity cab. But nothing seemed to change a thing.
I had realized that most of my issues were software related because sometimes things would work fine (for a couple minutes). I've tried the press the hell out of the keyboard buttons fix that was supposed to regain contact between the key, and the sensor for the keyboard, and pretty much everything out there.
Then I recently installed the HTC ROM for the Tilt, and voila, I have a new phone, works nearly flawlessly.
Since then, I have installed Manila 2d (start with update 20, install everything included, then install the latest version) youtube/opera/google maps/audio manager/pictures etc. all work perfectly, installed the Manila2D v20 N2A patch which fixed the weather tab to show my home town, M2DC and applied a new skin, Total Commander (to move the edited weathercities file), Wstask (awesome), ATT Navigator, Windows Live (great for syncing contacts), and it works perfectly. It's fast. I can use my phone now without the struggle, and am happier than I've been in a long time.
I haven't heard anyone suggesting this so I thought I'd let everyone know. This is the phone I always wanted from my Tilt. I have to assume that the minor hardware differences between versions creates a problem with non-native ROM's, and if you are having problems I recommend trying a factory ROM made for your device, you may be pleasantly surprised.
Dustin
*edit* As I'm sure most know, there are hardware issues with the keyboard for many, this will obviously not fix those issues. However, I was able to fix the massive software issues I've had which also effected the keyboard. I still have a testy Y key, but it's not a huge issue when compared to what it was like before. My phone works great.
Correct Forum?
Flashed to the HTC ROM for the AT&T Tilt, download here:
http://www.htc.com/us/SupportDownload.aspxp_id=67&cat=2&dl_id=94
Soft reset immediately after screen alignment, and setup to avoid bloatware.
Adjusted settings for MediaNet:
http://forum.xda-developers.com/showthread.php?p=1632060#post1632060
Installed the following cab files (here's the files, install order, what to do, how to do it, etc. is up to you, try to search for yourselves, I'll try to answer questions posed, included iFonz, and a couple other cabs for the heck of it if you guys wanna play with em):
http://http://rapidshare.com/files/239391014/Cab_Files.rar
Read the following post for info on installing m2d:
http://forum.xda-developers.com/showthread.php?t=425851
To install telenav go to the following address from your phone:
ota.telenav.com/att/tnn
If you do it right, I think you'll be happy campers, enjoy!
Dustin
I've been having the same issues with my tilt as well. EXTREMELY annoying. I love the tilt, but hate that it constantly lags.
Do you have a link to the ROM from HTC?
The last ROM from HTC for the tilt gave me problems
Yes please post the link as i am also having this problem.
Thanks
Link inside!
Here y'all go. It's important to note that this is ROM build 1.62.502.0 and will change your radio to 1.27.14.09. Further info can be found HERE
HTC AT&T Tilt ROM
Different link to the Rom
Here is the link for the page HTC posted the Tilt ROM download if you would like to read first before downloading:
http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=2&dl_id=94
Hope this helps you guys. For me it was night and day. Let me know if this helps you guys.
Also, I wonder if there are any ROM cooks out there who are interested in cooking ROM's based on the Tilt ROM. That would be sweeet!!!
Dustin
*edit* I'm not sure about the ROM tmnt.mikey posted, but the link I've posted does not change the radio to that version, I flashed and have radio version 1.65.21.18. I'm not sure what radio I was using pre-flash (oops).
does this work with kaiser as well?
because at&t does not have the front camera...
so if i flash to this rom, will it render my front camera unusable?
not that it's really that important, i'd rather have my keyboard functioning well again.
other than that, is there any complication if i run this on my kaiser?
because in the HTC page, it's said... only for at&t tilt...
Kaiser ROM
I have no way to know if this ROM will work for the Kaiser, someone would have to try it out and let us know. I can't imagine it would brick the phone, but the keyboard layout is different, and the front camera thing. However, you might look for the latest Kaiser ROM from HTC then apply all the cabs you want and see if that works for you. I installed the ATT ROM, then did a soft reset before the apps were loaded to save space and clutter, then installed just the cabs I prefer.
It's been almost a week now, and it is still working perfectly. I've installed almost 20 different cabs, it is running faster, and more stable than it ever has. I love my phone now. The difference is stunning. I haven't had any issues thus far, and I've never experienced that before. I hit a button and it works, I touch the screen it works. I'm going off about it so much because I want everyone to know this phone is not a lost cause. I'm still a little in shock how well it works. I had written it off, and thought between HTC, and Microsoft that this phone was just going to remain a glitchy pain in the rear. My phone was so difficult to use that I almost stopped texting all together. I was practically marking off each day on the calendar waiting for the remaining year of my contract to run out.
Dustin
Hi all..
my keyboard also hard to be pressed (X,B,N and fn key),other keys are perfect (easy to be pressed)..
im wondering why did that happen..
im using WM6.1 official for TyTN II,,so nothing is cooked..
anyone knows how to fix this issue?
cause it's so annoying to press thoses button hardly..sigh..
thank you..
berramm2001 said:
Hi all..
my keyboard also hard to be pressed (X,B,N and fn key),other keys are perfect (easy to be pressed)..
im wondering why did that happen..
im using WM6.1 official for TyTN II,,so nothing is cooked..
anyone knows how to fix this issue?
cause it's so annoying to press thoses button hardly..sigh..
thank you..
Click to expand...
Click to collapse
i actually followed the link from dustintm...
but the download was not for my area (i'm in singapore)
and you can't download it anyways...
you need to key in your serial number...
and it has to match the region...
so if that really fixed the keyboard problem...
congrats to those guys in the same region as dustintm...
as for why it happened, i also don't know...
i read in some other thread that it's unlikely if it's dust or the rubber...
i also think it has to do with the ROM, since some days my 'a' keys works fine...
Asian TyTN II ROM
Hey Jonathan,
Here is the link to the HTC Asia download page for the TyTN II:
http://www.htc.com/au/supportdownloadlist.aspx?p_id=13&act=sd&cat=all
Just so everyone knows, this ROM change I am talking about does not fix hardware related issues. I still have a testy "y" key, it works most of the time, but I do have to press it harder at times.
Prior to my find, I was having massive keyboard problems, sluggishness, having to press each key multiple times, etc. I was also having similar problems with the touch screen too.
This will not fix a hardware issue (obviously?). But I've found the new factory ROM has made my phone operate almost without flaw... for the first time. Responsive, stable and consistent. I can deal with the "y", I couldn't deal the snetacnes loking lik tihs (sentances looking like this (all the time)), and all the other problems/lock ups, etc.
Dustin
Keyboard problems sound like a hardware issue. You should try to find a local cellphone store that does repairs.
There is one in L.A. that can fix this for under $50.
Keyboard Problems
I found that I was experiencing hardware (keyboard), AND software related issues (keyboard, touch screen, sluggishness, and lock-ups). After installing this ROM all software issues have disappeared. I am very certain of this. One example is that occasionally the keyboard would work almost flawlessly (with the exception of the y key) and other times it was a complete struggle, multiple keypresses to register once, delay, etc. That made it clear to me that I was having software related issues.
I imagine it could have been ROM issues, or software related conflicts, but either way, I have solved my problems. I flashed to the latest HTC ATT Tilt ROM, and the following programs/cabs:
HTC Enchasements
HTC Audio Manager 2.0
herg62123 FSP, DShow, WMP Yo...
HTC Album 2.0
Google Maps
XDA-SPC-Noonski HTC YouTube
herg62123 2DManila_1_20_19131...
Customization Customize_Tool
snctln M2DC
C. Ghisler & Co. Total Commander
Debarron Manila2D v20N2A Patch
Windows Live 10.6.0034.0800 (Fixed)
waku WkTASK
AT&T Navigator
XDA-Team Opal Volume Control
Systweak Inc Reg Cleaner
SJ SamsungOmnia_Driver_D3D
Massimo Colored Top Bar
ELF Calculator Skin
The EquinoXe Wizard ReTOUCHed...
JUVS HTC Enlarge Start Menu
HTC WMP Touch Skin
Moble Software Design, LLC FreeCaddie
J.S. Advanced Configuration Tool 3.2
Microsoft .NET CF 3.5
XDA-Team NEW M2D
Dustin
BTW Trjons thanks for your post.
be a hero post all your cabs or links
So, it is heresy you speak! Stock rom! Yeah, I too am sick of the laggy unreliable roms. WAY too much wasted time, energy and effort. Gone back to ATT even though on TMO. How about posting your cabs or links for the lazy ones of us out here?
davewaave said:
So, it is heresy you speak! Stock rom! Yeah, I too am sick of the laggy unreliable roms. WAY too much wasted time, energy and effort. Gone back to ATT even though on TMO. How about posting your cabs or links for the lazy ones of us out here?
Click to expand...
Click to collapse
Also, did you get rid of the AT&T bloatware on yours as well? On a quest for the perfect ROM myself, so I will keep watching the thread for more info.
Would like to see those links as well.
If you want to leave out the ATT bloat ware, after you go through the screen align, do a reset. It will fail to run the script for the **** add ons and then you have basically a virgin rom.
Cab files
Hey lazy people ! Here's a link to all my cabs:
http://rapidshare.com/files/239391014/Cab_Files.rar
I'm somewhat lazy too, so you're going to have to download all of them then pick through to get the ones you want. Enjoy!
Dustin
Thanks
Your're a hero! Thanks for the cabs
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WHOA! Virus detected "win32/virut" after extracting file then accessing folder with "glossy black bars.exe"
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Hopefully I've removed the infected file.
I didn't know glossyblackbars.exe had a virus???
Don't need it anyway, I deleted it, recompressed the cab files and re-upped to rapidshare. I edited all my posts with the new zip link.
Please let me know if it's virus free now... so sorry!
Dustin
Thanks so much, Dustin!!! I think I will be loading the AT&T 6.1 ROM again, following your fixes, and praying that my 2-PC ActiveSync problem somehow gets resolved along the way, too. (We need a "crossing fingers" smilie! HA!)
I'm just not looking forward to setting my Tilt up all over again. Must wait until I'm in the mood.
Dustintm said:
I didn't know glossyblackbars.exe had a virus???
Don't need it anyway, I deleted it, recompressed the cab files and re-upped to rapidshare. I edited all my posts with the new zip link.
Please let me know if it's virus free now... so sorry!
Dustin
Click to expand...
Click to collapse

New Owner questions... e. g. G-Sensor, colors...

Hi,
i have bought a German Vodafone branded Touch Diamond 2. But i have some questions:
- There is a built-in G-Sensor, which can be calibrated, but it do nothing else. I can rotate the phone till my hands fall off, but nothing happens (i already tried some registry tweaks, i found in this forum)
- When i click on the Symbols in the Startmenu line e. g. the battery symbol, then it doensn't open the battery settings, but something called "notifications" (Benachrichtigungen).
- The Manila screen has wrong colors. White/red instead of black/white. How can i change it?
- How can i get the "HTC Audio Manager" to play the files in a folder? I want to listen to a audiobook, but it messes up the file order, which is pretty annoying.
Now, while i am writing this, i think about flashing a unbranded ROM could be simpler, right? But is this the solution i am looking for?
Greets
schnurzelat
- Accelerometer: Are you attempting to use the g-sensor for anything in particular? Try loading up the game "Teeter" which relies on the accelerometer for moving the ball along a maze. There are few provided apps which require the accelerometer functionality, and Manila doesn't rotate by default.
- TouchFLO notifications is an addon provided by HTC. Search the forums for instructions on how to disable this functionality; I believe there are a couple of applications which will allow you to do this without manually editing registry keys etc.
- Red / White is Vodafone's brand. You may be able to install a replacement skin for Manila, it's up to you.
I'm afraid I don't use my Topaz for listening to music, so I can't help with your final issue.
Flashing an unbranded ROM may resolve the third issue, but the rest will more than likely remain. I don't see them being issues, though, just personal preference!
HTH.
Thanks for the answers!
The solution for the first and the second problem is this. If someone is wondering: The Topaz has a built in G sensor, but it is unused, mean's that no installed program is using this feature by default. Really strange from my point of view!
The third problem seem to be a little more difficult: M2DC say's that manila is not installed! And i wasn't able to find a Diamond II skin to download. Others are available. Maybe someone can give me a hint?
For the fourth problem i work around using a patched TCPMP, which looks a little outdated, but is my personal number one for media playback.
Greets schnurzelat
I think you will find that the sensor is used when you flip the phone over on an incoming call to mute the ringing!
That's why I never use branded ROMs (T-Mobile Germany)!
M2DC won't work 100% with new Manillas, never worked on branded or official ROMs for me.
Try latest original German HTC WM6.1 ROM Build 1.39.407.1.
I don't like WM6.1, so I use Tom's Leo R2 WM6.5 incl. very nice Manilla 2.5, which runs great with latest Radio, but it's English language.
I don't like branded ROM's too. But the german vodafone flash isn't availble yet - so i can't go back in case of warrenty issue.
Greets schnurzelat

Categories

Resources