Alternative phone dialer skin? (must be VGA of course) - Touch Diamond, MDA Compact IV General

Disabling the dialer skin on the Diamond made me gain 10MB RAM and made the device much more responsive.
But, it also decreased the visual quality considerably. Default WM phone skin is ugly.
My question is, is there a way to install a skin that looks better and still does not waste much RAM?
I remember trying many dialer skins on my original Touch, but none of them were VGA.

i am interested in a new phone dialer. I installed some dialer in my htc p3300 and run very well, including the smartdialing. it would be possible to install a new phone skin dialer with the old smartdialing to the diamond?, i think the only problem is to find one with smartdialing, vga grafics and videocall.
thank you.

There are dialers with smart dialing, but so far none for VGA.
I'm surprised more people aren't interested in an alternative considering the default dialer takes 10MB RAM for nothing.

also looking for a phone skin that is vga for diamond. i too felt my device runs better with the diamond phone dialer disabled, but would like a different look to the windows version.
many thanks

Looking for subj, too

Wow - 10 mb. Thinks i shall disable mine...

Here, not sure if it helps but skins for standard wm 6 dialer. One looks just like it was made for diamond (remove the $ signs) 4$p$d$a.ru/forum/index.php?showtopic=78093&st=450
Removing the diamond dialer will also disable the incoming call screen?

Yup, this disables the incoming call screen too. Would really like a new dialer skin

Where does the 10mb come from?
Graphics? Can we not compress these graphics so when the phone is about to ring, it doesnt have to load up as much graphics etc. Might make it more responsive to incoming calls.
If the 10mb is from extra functionality then i suppose were stuck unless theres another dialer.
Is there a VGA skin for S2u2? i always use to use the incoming call screen from s2u2
So how about disabling the diamond dialer skin, and using a skinned s2u2 incomg call screen? Then im sure theres a standard dial pad skin to look like the diamond.
So vga diamond lookalike s2u2 skin??

I've tried all the phone dialers I found with google... nothing worked so untill HTC makes a good phone dialer with no 3 sec delay I'll stick with the default windows dialer and with a tweak the 3 sec is gone (only with wav files)

vibecatalin said:
I've tried all the phone dialers I found with google... nothing worked so untill HTC makes a good phone dialer with no 3 sec delay I'll stick with the default windows dialer and with a tweak the 3 sec is gone (only with wav files)
Click to expand...
Click to collapse
could you explain this tweak please? I have tried so many dialer/skin combos for VGA Wing and it drives me nuts that even at XDA there is no great dialer available.
I'm looking for large keypad and something other than black-this, black-that. I've seen the manilla dialer skins but they don't work too well for vga. but still, as for dialer software itself, I too add my name to this list of people still wishing to find an alternative.

There's a .cab file for WM5 wich works on WM6.1 that disables the 3 sec delay only if you use the default dialer ( wich is very ugly and I don't like it) and .wav files.. but I got a problem after that , when ringing the ringtone was very choppy and with interuptions... I did an Hard Reset ... and I'm waiting for a new dialer

vibecatalin said:
There's a .cab file for WM5 wich works on WM6.1 that disables the 3 sec delay only if you use the default dialer ( wich is very ugly and I don't like it) and .wav files.. but I got a problem after that , when ringing the ringtone was very choppy and with interuptions... I did an Hard Reset ... and I'm waiting for a new dialer
Click to expand...
Click to collapse
disable diamond phone dialer will disable video call too..thats not a good idea

vibecatalin said:
There's a .cab file for WM5 wich works on WM6.1 that disables the 3 sec delay only if you use the default dialer ( wich is very ugly and I don't like it) and .wav files.. but I got a problem after that , when ringing the ringtone was very choppy and with interuptions... I did an Hard Reset ... and I'm waiting for a new dialer
Click to expand...
Click to collapse
The tweak also works with the HTC dialer.
http://forum.xda-developers.com/showthread.php?t=419333

chasist said:
disable diamond phone dialer will disable video call too..thats not a good idea
Click to expand...
Click to collapse
Well, I am using video calling quite ...
...
never

Disabling the phone skin also disables being able to raise or lower volume during calls.

that figures , have been trying to figure out how to do that ...

You can remove the HTC Volume Control with this cab here:
http://forum.xda-developers.com/showpost.php?p=2718080&postcount=7
This will allow you to change in call volume again.
I too am looking for skins for the standard WM6 dialer - the default grey is ugly.
I found this thread with some skins that are perfect, but they're all QVGA...
http://forum.xda-developers.com/showthread.php?t=295951
Has anyone been able to find any VGA skins?

how to disable the htc dialer?

BelugaHval said:
how to disable the htc dialer?
Click to expand...
Click to collapse
You can do it with Diamond Tweak or Schaps Advanced Config. The Volume control needs the cab linked above.

Related

s2u2 slide-to-answer problem

Hi,
Has anyone got the s2u2 Slide to Answer feature working?
I've got S2A turned on, but when a call comes in, it looks like S2A and the TouchFlo answer screen are fighting it out as to which one gets control... there is lots of flickering on the display, and it switches back and forth between the S2A and the Touchflo answer screens.
If you press the screen, it seems that the TouchFlo is getting priority, as the Answer or Ignore buttons will work, even if they aren't actually being displayed.
Anyone managed to get this working properly?
I'm using S2U2 version 1.03.
Thanks for any suggestions.
Regards,
Ben
ben_gb said:
I've got S2A turned on, but when a call comes in, it looks like S2A and the TouchFlo answer screen are fighting it out as to which one gets control... there is lots of flickering on the display, and it switches back and forth between the S2A and the Touchflo answer screens.
Click to expand...
Click to collapse
lol
That sounds like fun.
I suppose you can disable TouchFLO 3D, although you probably don't want to do that. You might be able to stop TouchFLO 3D from handling calls with a registry edit, although I doubt it...
I have the same problem. After several tries, I found two solutions. The first one is using AdvanceConfig to disable 'phone skin', after restart, s2u2 works properly. But the dialpad is no longer the diamond style. The second one is to install another dialpad to replace the existing diamond dialpad.
But i really love the existing diamond dialpad, so I gave up the s2u2. hehe, really hope someone can fix this problem.
So can you still utilize all the other S2U2 goodness besides S2A feature? If so, I'd happily turn off S2A and keep all else. Though a proper solution would also be the preference.
yes, other functions work in a good condition
i really love the existing diamond dialpad, so I gave up the s2u2. hehe, really hope someone can fix this problem.
has someone found a solution?
i blocked the touch function of the screen when there is incoming call. So now i use hardkey to pick up the phone. For s2u2, A_C also realized the problem, hope he can fix it in the near furture
bin862cn said:
i blocked the touch function of the screen when there is incoming call. So now i use hardkey to pick up the phone. For s2u2, A_C also realized the problem, hope he can fix it in the near furture
Click to expand...
Click to collapse
how could you block the touch function when there is an incoming call?
ageye said:
how could you block the touch function when there is an incoming call?
Click to expand...
Click to collapse
I'd like this answer too, i love so much s2a and the other functions but i love the classical tflo dial pad(i'm a little bit confused about all the tweaking and installing out the box apps that may get in conflict with others!)
However i still think that Diamond will be a superphone in one month or two with all the geniuses around here
There is another thread with exactly this issues. If you have managed to block the touch screen and just allow the hard keys, how did you do it?
up up.
Does anyone found a solution? My S2U2 worked great, untill this morning.....Now I have the same problem.
How can help.....
You can keep touchflo3d dial pad with S2U2, just have to edit registry "HKLM\Software\HTC\Biotouch" make a new Key called "Disable4SpecificApp", and inside this another one called "S2U2", inside this a new string wich "value name" is "classname" and its "value data" is "S2U2"

Replacing Video Dialer Skin

Im not a big fan of the video dialer on Dutty's Rom's. I attempted to replace it but no dice.
I would like the black dialer as shown here:
Tried installing cab, but after soft reset Dutty's red kaiser dialer still there.
Tried wiping out folders in registry HKLM/Software/HTC/PhoneCanvas and HKLM/Security/Phone/Skin and reinstalling cab and still no dice (Prolly shouldn't a done this but found these keys on the Athena form, so thought i would give it a try). Now Dutty's Kaiser dialer is gone, but with phone skin enabled or disabled shows standard dialer.
Any one replaced a video dialer skin with another video dialer skin? What am I doing wrong? Any hints?
* I have attempted several searches through the forms all turning up mostly goose eggs for swapping video dialer skins. I see no guides or wikis for this.
Poor xcuse for a BUMP!
Beuler...
Beuler...
Anyone...
Anyone...
C'mon someone out there knows where I should look for this answer... Someone has to have modded their video dialer. Should i try to ask about this in General?
I
Guess no has done this...
Too Bad! I'll do some more digging of my own on the topic. If anyone can think of anything at all, be sure to drop a line, I'll be more than happy to look in any direction that you may point me.
Thanks!
Saturday November 17 2007 update:
Note: Newer HTC models (HTC Tytn II / Kaiser and HTC Touch) have their own custom dialpads, these skins aren't suitable for them. Do not install! You might have to hard reset if you cannot remove these skins via remove in settings
I've been digging in this as well but no luck... I Bricket my device once or twice trying to solve this.
There's loads of dialer skins but most without or no working video.
The skin you found look awesome so if you get it working plz let me know.
@jamorgan2008
you can try before installing an alternative dialer following.
1. Set the key in the registry HKLM\Security\Phone\Skin\Enabled to "0" to disable video dialing function.
2. SoftReset
3. Install other dialer
4. SoftReset
5. That´s it
I had same issue on my Kaiser, but after that it works as expected

Ringtone Manager for WM6.1 (Diamond)

Hi there,
is there someone with a ringtone manager working?
I've already tried the last versions of mRing and Ringo, with no success.
mRing, doesn't work
Ringo, works but i can't mute incoming calls :\\
Open to suggestions, this topic can help alot of users with this issue.
Thanks all.
No one uses ringtone manager on your Diamonds??
Thanks
rockas said:
No one uses ringtone manager on your Diamonds??
Thanks
Click to expand...
Click to collapse
I have tried either ringo and mring too. Ringo doesn't work, because put a lag beetween the received call and the ring. Often phone ringed when on the other side call was closed. Mring seems to go well. Phone rings after one ring (wm normal lag ) and I don't have had any problem....... so far.
I use original italian rom from HTC 1.37 and I've disabled phone skin using advanced config.
Cheers
I am using Photo Contacts Pro. This comes with Ring Manager, SMS contact rings as well as profiles.
Works well for me.
It looks interesting...
I didn't know that software...
To customize sms, it should be perfect
http://www.pocketx.net/products/photocontactspro_ppc/index.html
unvisigoth said:
I have tried either ringo and mring too. Ringo doesn't work, because put a lag beetween the received call and the ring. Often phone ringed when on the other side call was closed. Mring seems to go well. Phone rings after one ring (wm normal lag ) and I don't have had any problem....... so far.
I use original italian rom from HTC 1.37 and I've disabled phone skin using advanced config.
Cheers
Click to expand...
Click to collapse
Your Diamond work well with mRing??
What version? does the mRing initial screen appears normal?
With mRing, mine don't even ring
could it be because of phone skin?
rockas said:
Your Diamond work well with mRing??
What version? does the mRing initial screen appears normal?
With mRing, mine don't even ring
could it be because of phone skin?
Click to expand...
Click to collapse
Yes it does. My version is 4.03. The inital screen seems a little bit confused but it seems work well. Try do disable phone skin and try mring again. Disabling phone skin you gain about 10 MB of free ram. If you like the skin that comes with the diamond try to disable it and use S2U2. It's better, lighter, and with a lot of settings.
Cheers
where can i get S2U2?
http://forum.xda-developers.com/showthread.php?t=381588
thanks for the help
I am having issues with Photo Contracts Pro and my Sprint Diamond. When I hit answer the ringtone starts to stutter and the call takes a few more seconds beofre it answers
Problems with Photocontacts Pro with Diamond
biggggant said:
I am having issues with Photo Contracts Pro and my Sprint Diamond. When I hit answer the ringtone starts to stutter and the call takes a few more seconds beofre it answers
Click to expand...
Click to collapse
Hi! Also I have , not one but a lot of issues with the Photo contacts Pro in my Diamond. I really thing that it does not work with that device.
First I installed the last version 5.09 and had a lot of problems (rings, answering the calls, Extended menus of the Today's Plug-in,.....). Wit the older version 5.08 it seems that works a little better, but the Today's plug-in has some very big text, wich make the Today's Screen a real mess.
Best regards!
Simplest One
Use this freeware to add custom ringtones to contacts/ categories etc.
mine had stopped working after a soft reset following changing the registry location to the sd card so am very pleased to have found such a small app that assigns individual tones to contacts, thankyou

2 Side Voice Recording on Kaiser **WORKS**

I made a simple cab from the registry settings that you install to device memory, then soft reset and use any voice recorder (HTC Voice Recorder, VITOAudio Notes, Resco Audio Recorder) to record both sides of the conversation. I have tried it with several Roms, dialers and skins too and it works fine with all these and no adverse affect on normal conversation
Might be worth cooking into a Rom to give 2 side recording as standard.
Tested and working on the following Roms:
SimpleOS Xtralite v2.1, HyperDragon 4th Feb, PDA Corner Ultimate v17, v19 & v20, Anryl's 15/3 6.S rom, AthineOS WWE, WM6.5 betas (HyperDragon and PDA Corner works with HTC Voice Recorder and VITO Audio Notes, rest confirmed with VITO Audio Notes).
Download the 2_Way_Recording cab (rapidshare) *HERE*
EDIT: Made a new cab combining my 2 way recording plus the incall enable edit from pocketnow.com to enable BOTH sides to be recorded clearly from the dialer menu after a call has been established. It does not affect the ability to use a 3rd party app if you want, just gives you extra ease so you dont have to load any new programs up when you are in a call. Install the following cab to device memory, then once a call has been established just goto the dialer menu and select record. It will record in .wav format and save the recording to the Device\My Documents\Notes folder.
Download the 2_Way_Plus_InCall_Recording cab (rapidshare) *HERE*
mskip said:
First thanks to nick_martin for originally posting this in the ICR for Kaiser (2 side call recording software) thread.
I just made a simple cab from the registry settings that you install to device memory, then soft reset and use any voice recorder (HTC Voice Recorder, VITOAudio Notes, Resco Audio Recorder) to record both sides of the conversation. I have tried it with several Roms, dialers and skins too and it works fine with all these and no adverse affect on normal conversation
Might be worth cooking into a Rom to give 2 side recording as standard.
Download the cab *HERE*
Click to expand...
Click to collapse
so sweet ty skip
Thank you for this contribution.
Thanks bruv gotta try this out
If it works for you then report back what phone, rom and radio you are using it on please
mskip said:
First thanks to nick_martin for originally posting this in the ICR for Kaiser (2 side call recording software) thread.
I just made a simple cab from the registry settings that you install to device memory, then soft reset and use any voice recorder (HTC Voice Recorder, VITOAudio Notes, Resco Audio Recorder) to record both sides of the conversation. I have tried it with several Roms, dialers and skins too and it works fine with all these and no adverse affect on normal conversation
Might be worth cooking into a Rom to give 2 side recording as standard.
Download the cab *HERE*
Click to expand...
Click to collapse
I tested on two different roms. The first rom from Anryl's 6.S rom 21179 didn't work. Tried two radios (didn't take note since it didn't work). Was using Resco audio recorder and when in record mode, call comes in, message popped up saying cpu overload.
This morning, I tried on SimpleOS Xtralite v2.1 and with the radio recommended (1.70.18.02), it works. The audio from far end is rather soft during playback.
Congratulations!
Works great for me, ty for sharing this, as i'm sure most of us wouldn't have seen it in the original thread.
Thanks alot mskip
Oh and I'm using an AT&T Tilt with Hyperdragons 02/04/2009 IOLITE Rom with Kaiser 1.65.21.18 Radio. Worked just fine using builtin htc audio recorder and Vito Audio Notes Touch
zard said:
I tested on two different roms. The first rom from Anryl's 6.S rom 21179 didn't work. Tried two radios (didn't take note since it didn't work). Was using Resco audio recorder and when in record mode, call comes in, message popped up saying cpu overload.
This morning, I tried on SimpleOS Xtralite v2.1 and with the radio recommended (1.70.18.02), it works. The audio from far end is rather soft during playback.
Congratulations!
Click to expand...
Click to collapse
Tested on Anryl's 15/3 6.S rom after fresh flashing. Works with 1.70.18.02 radio. I only have SMS restored, Resco Explorer, PCMKeyboard and Resco Audio Recorder installed. Didn't get the cpu overload problem. Need to complete my Exchange 2007 Sync and finish installing the rest of the apps again before I test again.
Recording volume is rather soft though, even though volume had been set to maximum, same as for my TyTN II volume.
It seems not work in Diamond..
eastwoodwang said:
It seems not work in Diamond..
Click to expand...
Click to collapse
Phone or Rom?
Great job mskip ! Finally working for me !
ROM AthineOS WWE, RADIO 1.71.09.01 and VITO AUDIO NOTES 1.37
Thanks
Finally got this to work with stock AT&T Tilt
Thanks to everyone involved.
Vito Audio Notes was tricky to figure out. I uninstalled and reinstalled it several times before I got the settings right.
Move the yellow equalizer all the way to the left when recording. Set the microphone gain to high.
If you move the yellow equalizer all the way to the right, it will only record very loud sounds, which doesn't work for recording phone calls. If you set the microphone gain to low, the recording will be hard to hear when you play it back. You'll have to hold the speaker up to your ear.
Thanks mskip & OP
Runs perfect with PDA v.19 & VITO AUDIO NOTES 1.37
Can't believe that after all this time 2 way works wonder if it would on Dash?
stylez.
Thanks Sir mskip,
Could it be mirrored?
Thank You
This is so sweet, now we have 2 solutions on a issue that I've been trying to solve for about 1,5 year...
What happens if you install this fix with the ICR driver installed??? Let's try! I'll report back later for those of you who allready use ICR but want a louder recording.
stylez said:
Thanks mskip & OP
Runs perfect with PDA v.19 & VITO AUDIO NOTES 1.37
Can't believe that after all this time 2 way works wonder if it would on Dash?
stylez.
Click to expand...
Click to collapse
I dont know you should try it lol its only a registry edit rather than overwriting drivers and if it doesnt work you can uninstall it
Yeah I know what you mean I have been looking for some way to record both sides of a conversation for about 3 years when I got my old Hermes. Even tried going through bluetooth to my pc and recording that way lol. All it took was a few simple registry changes to allow this. I was always told it was a hardware problem and would never be possible lol. Im happy now
When I went into my registry to test this method my values was already set as the original post (http://forum.xda-developers.com/showpost.php?p=3463124&postcount=75)...
I wonder if this is what ICR does, is it the same solution??? Have anybody done a deep analysis of the ICR cab?
I was hoping for a louder recording...
jorra said:
This is so sweet, now we have 2 solutions on a issue that I've been trying to solve for about 1,5 year...
What happens if you install this fix with the ICR driver installed??? Let's try! I'll report back later for those of you who allready use ICR but want a louder recording.
Click to expand...
Click to collapse
Ok let me know what happens
After you install ICR the only way to get rid of it is a Hard Reset. Not sure how they will work together maybe the registry edit will bump up the volume with icr.
I think the registry changes are more compatable then using ICR as alot of people seem to have problems getting it working.
Report back
jorra said:
When I went into my registry to test this method my values was already set as the original post (http://forum.xda-developers.com/showpost.php?p=3463124&postcount=75)...
I wonder if this is what ICR does, is it the same solution??? Have anybody done a deep analysis of the ICR cab?
I was hoping for a louder recording...
Click to expand...
Click to collapse
I guess if your recorded volume didnt increase then ICR is taking control of rerouting the incoming sound. With JUST the registry changes the volume is very loud. I had a 30 minute phone call yesterday and VITO Audio Notes recorded both sides perfectly. Maybe you could try a hard reset sometime to get rid of ICR and then try a comparison with just the registry cab
mskip said:
I dont know you should try it lol its only a registry edit rather than overwriting drivers and if it doesnt work you can uninstall it
Yeah I know what you mean I have been looking for some way to record both sides of a conversation for about 3 years when I got my old Hermes. Even tried going through bluetooth to my pc and recording that way lol. All it took was a few simple registry changes to allow this. I was always told it was a hardware problem and would never be possible lol. Im happy now
Click to expand...
Click to collapse
Never guess what it works
Going to do a bit more testing as not sure if the RoseROM worked without as never tested it will also test Kavana's "as know that didn't", will link to you if all fine.

Vibrate to Connect in 6.5

is it possible to make your phone vibrate on call connect while using the windows default keypad?
i know if i enable the diamond keypad it works.
and also the program "Vibrate On Connect" does not work with the Touch Pro.
I am told it cannot work without the diamond phonepad.
So i'm wondering if anyone can enable it through a .cab file on a non-htc customized 6.5 rom
Have You tried this?
Try Start>Settings>Personal Tab>Phone>Scroll all the way to the right until you see the Advanced tab>Remove the tick from "Vibrate device when connection is established">Click OK until you see your home screen.
TheDempster said:
Have You tried this?
Try Start>Settings>Personal Tab>Phone>Scroll all the way to the right until you see the Advanced tab>Remove the tick from "Vibrate device when connection is established">Click OK until you see your home screen.
Click to expand...
Click to collapse
That tab doesn't exist in WM6.5 with the default dialer.
The only way I know of is to use s2u2 and set it to answer calls and it has an option to vibrate on connect, but I honestly don't use it because I like the built-in lock app in 6.5.
GustavTheLion said:
is it possible to make your phone vibrate on call connect while using the windows default keypad?
i know if i enable the diamond keypad it works.
and also the program "Vibrate On Connect" does not work with the Touch Pro.
I am told it cannot work without the diamond phonepad.
So i'm wondering if anyone can enable it through a .cab file on a non-htc customized 6.5 rom
Click to expand...
Click to collapse
How do you switch between the Diamond dialer and the Windows default dialer? I can only see the Diamond dialer. If I knew how to switch I would look into it to help you.
AdamNimrod said:
How do you switch between the Diamond dialer and the Windows default dialer? I can only see the Diamond dialer. If I knew how to switch I would look into it to help you.
Click to expand...
Click to collapse
Da_G WM6.5 21198 Test 2 ROM has stock dialer. Only HTC based app i've noticed so far is for the camera. You could flash this and check out the fresh new non-htc goodness..
neight said:
Da_G WM6.5 21198 Test 2 ROM has stock dialer. Only HTC based app i've noticed so far is for the camera. You could flash this and check out the fresh new non-htc goodness..
Click to expand...
Click to collapse
Uh, thats that ROM Im already an using.
that option is there because i used Da_G's kitchen and installed the htc dialer because i thought i would like it, however the 6.5 dialer i like better so i used advanced config to switch back.
and yes i like the 6.5 lock much better as well so s2u2 is not an option.
also i downloaded some kind of green button app or something called vibrate which automatically starts when i boot up however never installed, just ran as a .exe and it does what i want- almost- it vibe's on connect however it is a little late and the vibration is too much and not subtle like the htc diamon dialpad one- if anyone can get the vibrate on connect feature from the diamond dialer it would be apprieciated- also how can i stop this new vibrate.exe from running?
Try this and hope you got the fix.
HKLM\Software\HTC\PHONE\PhoneExtendSetting
"ConnectingVibration" set value to 1 to Enable
0 to Disable in Decimal
beastfellow said:
Try this and hope you got the fix.
HKLM\Software\HTC\PHONE\PhoneExtendSetting
"ConnectingVibration" set value to 1 to Enable
0 to Disable in Decimal
Click to expand...
Click to collapse
the value is 1
and not Vibrate after connect
thank you
didnt notice the word "htc" in that registry key? thats for the diamond dialer. does it not work if you install htc dialer and disable it (switch back to standard wm dialer) using something like diamond tweak? or does the tab with the vibrate option disappear with it?
The Jack of Clubs said:
didnt notice the word "htc" in that registry key? thats for the diamond dialer. does it not work if you install htc dialer and disable it (switch back to standard wm dialer) using something like diamond tweak? or does the tab with the vibrate option disappear with it?
Click to expand...
Click to collapse
To return to WM dialer
HKLM\Security\Phone\Skin
set (Enabled) to 0
soft reset
I used Advanced Config v3.3 to revert to the WM 6.5 dialer (which I actually like a lot more than I thought I would), but I also lost the vibrate functionality, which I really enjoy, since where I work my signal fluctuates a lot, and even though I'll show good service on Sprint, it often won't connect, and I'll just hold it in my hand, or put it down on the table and wait for it to actually go to "connected" when I hear/feel the vibrate.
When I go into the Phone options Advanced tab I still have the option to "Vibrate on Connect", but it doesn't work, either checked, or unchecked.
Anyone able to get their phone to vibrate on connect using the WM6.5 dialer?
This isn't a dealbreaker for me, or anything, as I prefer the speedier WM dialer over the delayed HTC dialer (especially when the unit is locked), but it would be nice to get it back.
Vibration on connect
vibration on connect and Slide unlock bugs existent in all cooked ROMs in this forum. I trial all ROMs and found it. If you know the resolves please post it here. thanks
i have the same problem and i would like to know how to fix it ..
thanks all
-Did you try using "Pocket Shield"?, i use it with Da_G 6.5 rom too.
-It's a locking program with amazing options to lock/unlock your device (with light, stylus, slide, gestures)
-AND has the option to vibrate when call connected and is as subtle as de touch pro/diamond dialer. Just a short vibration after the call is engaged.
-Works great for me...
-IT IS NOT FREEWARE though... googleeeeeeee
The solution
Dear my friends ,
here is the solution.
A little CAB for you ;D
Greez,
kvNN_
hi,
have problems for install this cab...
have a error and don't possible install... any idea ?
I have a HTC Diamond and WM 6.5 ROM.

Categories

Resources