Database Develop

Wifi and use of IP address

I cannot connect to wifi. It says connected and it says i have an IP address but i can't navigate to any webpages. I use WEP and have WM5. If I enter a wrong wep key it won't connect so i feel that i am actually connected to the network just my device isn't realizing it. Is there any manager like the cooked rom of 2003se where i could manually choose WLan as my option to connect to the internet. I have also tried turning off wep on my router and other settings like that. Changed in between connected to work or the internet. Any ideas?

I found the problem. for some reason it was trying to connect on my gprs proxt server. that would always deny the connection. I had to set up my GPRS as my work connection and a generic connection that connected to the internet and ONLY put this network connects to the internet. Also it only worked if i used the existing my work connection and didn't work if i created my own with the same settings..
All is now well in thw WM5 world.. no more resets!!! think this might be a bug though..
I just realized that this ONLY pertains to ATT GPRS settings because they are the only ones who need to set up a proxy server..

now that connections work with my wifi i have one problem and this occurs with GPRS also.. my connections seem to time out. I was trying to download about 50k of mail and after about 10 messages it says "Unable to connect to incoming mail server" I've been connected just fine.. then the connections fails.. i have to do it all over again..

wireless network (LEAP)

i cannot connect to my work wireless...
The ssid is hidden and the netwok is using 802.1x EAP Cisco (Leap) with data encription wep.
My laptop works fine, but i cannot connect my wizard.
i use faria`s 3.3 rom...
Any ideea?
Thanks!

Help before I LEAP
icezar said:
i cannot connect to my work wireless...
The ssid is hidden and the netwok is using 802.1x EAP Cisco (Leap) with data encription wep.
My laptop works fine, but i cannot connect my wizard.
i use faria`s 3.3 rom...
Any ideea?
Thanks!
Click to expand...
Click to collapse
Did you ever get an answer. I am trying to get a LEAP connection too! any info would be great.

Goto Junpier.net and search for Odyssey Client. You can register for a free 10 day trial. It's the same client that came on the Dell Axim. My company uses the same thing, and I've had sucess with it under WM5. A couple of small tips when installing. I've noticed if you deactivate the phone first, you have better luck with the program. Also, it seems that under WM6, I haven't been as lucky with the problem.

WM6 internet sharing with whole network

Hi, I have a Tilt and do not have a problem tethering to a single computer. What I would like to do is share with all four computers in my home. I have tried bridging the sharing connection to my lan connection and have gotten dhcp on the Tilt to assign addresses to all computers on the network, but they still can't ping each other (other than the tilt and the computer its directly tethered to. I have turned off all firewalls and still nothing. Rebooted everything. Still nothing. Is it possible to do this? Thanks for any help.

There's a program around here somewhere that allows you to make your TILT a wireless router. If you do this, any machine with wi-fi can connect to the SSID and go.
Anyone have the link handy?

Wireless Router
Could I have it connect with my current wireless router to provide internet to my wired network through the rj45 ports on the router ? 3 of the 4 computers are on a wired lan. You see, we just got HSDPA on Monday and I love it. I got a bit ahead of myself and cancelled my home DSL connection. Now I'm realizing that I am stuck with only having one computer on the internet at a time. This has got to be possible. - I just found the thread on setting up as a wireless router. I will start playing with it. Any suggestions/instructions are appreciated.

OK, get connected to your carrier whilst tethered.
Then from any Explorer window on your tethered PC, select, 'Set up a home or small Office Network'.
Select the first option in the following box 'This computer directly connects...' and follow it through.
This should set up your Activesync PC as an IP address of 192.168.1.1. (an access point IP)
If you connect any other PC/laptop to this PC via wireless or LAN (you do know how to do that I hope??) to this computer, it will share the internet connection..
Remember, this will change any prior Internet configuration you have on the PC/Laptop!
Hope this helps.

Internet sharing
Thanks for the suggestion. I am going to try that again. The first time I tried that I found out that the Tilt had already assigned itself the address of 192.168.0.1 . On the XP machine, the computer will always use that same address to share its connection, so it immediately complained that another computer on the network is already using the required address for internet connection sharing. Maybe all I need to do is force the Tilt to use a different ip address like 192.168.0.10? I am not sure how to do that since this is my first time using Windows Mobile as part of a network sharing its connection. The only reference I could find to 192.168.0.1 in the registry was HKLM\Comm\BTPAN1\Parms\TcpIp. Should I change that?

jebrown1 said:
Thanks for the suggestion. I am going to try that again. The first time I tried that I found out that the Tilt had already assigned itself the address of 192.168.0.1 . On the XP machine, the computer will always use that same address to share its connection, so it immediately complained that another computer on the network is already using the required address for internet connection sharing. Maybe all I need to do is force the Tilt to use a different ip address like 192.168.0.10? I am not sure how to do that since this is my first time using Windows Mobile as part of a network sharing its connection. The only reference I could find to 192.168.0.1 in the registry was HKLM\Comm\BTPAN1\Parms\TcpIp. Should I change that?
Click to expand...
Click to collapse
NO, 192.168.0.1 or 2.1 or.3.1 are all access point AD's.
You have to go into your PC/laptop Network Places icon to tel IT to then share the connection.
I am sorry, but if you have never shared an internet connection on your PC before (ie via modem or ADSL), you will not really understand how it is done.

Access points
Thanks for your reply. The problem is that we are trying to make the pc an access point and trying to make the tilt an access point at the same time. They both are using 192.168.0.1 as the default ip address and as far as I tell there is not a way given to change that. The Tilt automatically uses 192.168.0.1 and when you using the sharing wizard on the pc it also uses the same address for its network card thats connected to the home wired network. Unfortunately for me, two devices on a network cannot have the same ip address. There must be a way...

jebrown1 said:
Thanks for your reply. The problem is that we are trying to make the pc an access point and trying to make the tilt an access point at the same time. They both are using 192.168.0.1 as the default ip address and as far as I tell there is not a way given to change that. The Tilt automatically uses 192.168.0.1 and when you using the sharing wizard on the pc it also uses the same address for its network card thats connected to the home wired network. Unfortunately for me, two devices on a network cannot have the same ip address. There must be a way...
Click to expand...
Click to collapse
OK, set all computers on the network to fixed IP's of 192.168.0.xxx in Internet protocol (under TCPIP on network)with the same subnet mask with a default gateway matching your device! Try that...

sharing
That was my first attempt at a work around. The problem is that there are
actually two network connections to the pc. One for the Tilt (usb) and one for the LAN (nic card). They don't seem to see each other even when they have matching ip addresses and subnets. Thats why I tried right clicking them and selecting "bridge these connections." It seems that internet sharing "requires" DHCP to be used. I tried setting all the computers to use DHCP and actually had the Tilt assigning ip addresses to all of the computers on the network by bridging the two connections and using dhcp. Oddly, though, the computers on the network could not ping the Tilt. I think its because bridging uses the data link layer of the osi networking model?

There must be a hack to change the ip address that windows uses for the sharing access point. Alternatively, it would be nice if there were a device out there that could act as a hub to network usb and 100baseT devices together. In other words, plugging usb and cat5 cable rj45 plugs into the same box and having them all be on the same network.

OK, I have asked smitty to get on this but both of us are WAYYYYy past our bedtimes.
He should get back to you tomoz on this. (he's the Network buff..)
Hope it works out..

this is the app mentioned earlier and may help your solution...
http://forum.xda-developers.com/showthread.php?t=341398

I can't make this work. I don't have WiFi on all of my computers. I was hoping to use WMWifiRouter to connect to my wireless router and then to my whole wired network. Is there a way to make the Tilt wireless router to connect with another wireless router? I'm thinking what I will do is go back to an AT&T rom and use "wireles modem" instead of "internet sharing". That way I can share the modem with the whole network. There doesn't seem to be a good way to use the Tilt internet sharing with the whole network. What do you guys think?

Deleted.....

For any future readers of this thread: I put the stock AT&T rom back on this phone and did a soft reset during the initial boot to stop the bloatware from loading. I went to start>settings>connections and tapped the wireless modem icon to open the app. I selected "usb" and tapped done then plugged the usb into my computer. My win xp computer found the new modem hardware and installed the HTC modem driver. I then setup a new dialup connection on my computer, and used the following to setup the login and dial:
username: [email protected]
password: cingular1
dial #: *99***1#
When I clicked on dial, it quickly connected to the AT&T network and I had internet access on my computer! I went to a speed test website and clocked my download speed at 1.2mbs and upload at 300kbs. I then opened "my network" and started the network setup wizard. I selected "this computer connects directly to the internet" and "file and printer sharing". To make a long story short, I am now able to share the Tilt's HSDPA internet connection with my whole network! I could not do it using the internet sharing function of the Tilt with either the AT&T rom or the kaiser rom. It would be awesome if someone more educated than me could make this function part of the HTC kaiser rom.

Nojnaworb wrote:
.....the problem is that we are trying to make the pc an access point and trying to make the tilt an access point at the same time. They both are using 192.168.0.1 as the default ip address and as far as I tell there is not a way given to change that. The Tilt automatically uses 192.168.0.1 and when you using the sharing wizard on the pc it also uses the same address for its network card thats connected to the home wired network. Unfortunately for me, two devices on a network cannot have the same ip address. There must be a way.......
I have same problem. I agree with Nojnaworb, this is the reason why its not working.
I have no Wifi at home and have to use LAN for my home network (2 PC + 1 ppc).
Under WM5 it was easy to share Internetconnection with all Lan adapters.
I cannot believe there is no way.
PLS Networkexperts, tell me how to setup !!

Its really quite simple.
You dont connect all the computers to the tilt. You use ICS on the tilt to provide one pc with an internet connection.
You then share the internet connection from that pc to the other pc's using the networking wizard.

I think part of this persons problem was that he needed to bridge the 2 connections.
here have this.
http://www.windowsnetworking.com/articles_tutorials/wxpbrdge.html
You should be able to connect the Tilt, (let it use whatever address it wants) and then make a bridge from the tilt to your nic in the server. Then I beleive you just use internet connection sharing to disperse the lovely packets to the rest of the network. Without the bridge, there is no way to share from one network to another.
I'm pretty sure that you will need to set the address to 192.168.0.2 on the server or any other number were the 2 is. If your using a router then I would suggest turning off dhcp and not using the WAN port on it. Just treat the router like a switch/hub because it will just makes things even harder to figure out.
wish we had service that was worth sharing to my network.

Wi-Fi connects but NO data transfer

Hi,
I have just got the Diamond and I have two main problem.
1) Although I have connected the Diamond to my Home wireless network, there is no data transfer. Opera can not open pages, Youtube can not start even I can not update weather?
2) When I connect the Diamond to the Laptop / PC, all PC's and Laptops connected to my home network (wireless) drop from the connection and never connect again?
Thank you for your kind help...

I have same problem with my Diamond.

1) go to: startmenu->settings->connections->Wi-Fi->networkcard/adapter->and make sure that it says "my networkcard/adapter connects to internet"Also at the same tab open IEEE 802.11b/g Compitable Wi-Fi Adapter and try to a static ip matching the one your pc uses. (not sure about it since i can't recreate the problem atm..)
2) Try the thing I suggested in this thread http://forum.xda-developers.com/showthread.php?t=417664 (plz use search next time)

bobo_error said:
1) go to: startmenu->settings->connections->Wi-Fi->networkcard/adapter->and make sure that it says "my networkcard/adapter connects to internet"Also at the same tab open IEEE 802.11b/g Compitable Wi-Fi Adapter and try to a static ip matching the one your pc uses. (not sure about it since i can't recreate the problem atm..)
2) Try the thing I suggested in this thread http://forum.xda-developers.com/showthread.php?t=417664 (plz use search next time)
Click to expand...
Click to collapse
Thanks for your reply, but both of solutions do not work for me...
Any other suggestion?
Thanks for your help..

Try turning on wifi, then go in LAN WIRELESS and change in "improved performance"

All of this do not work for me too...

Go to Wireless LAN settings and there to power mode and set yo best battery.... that worked for me.

in "settings => connections => WiFi" is "Connected". In "Wireless Lan" there is Connected too... In log on my router there is MAC adress of Diamond as associated and authorized. All seems OK. But on Diamond do not work any internet connection (Weather, web, etc...). With Active Sync works fine. Laptop with the same settings works fine. But Diamond with WiFi... no way :-(

Any other suggestions?

Same problem after i made ROM update from 1.7... to 1.93. before works fine. no other software is istalled.

Been having an issue with connecting to my wireless network also for the last week. My phone is from orange in the UK. My wireless router is an Dlink 614+ on Virgin cable broadband.
The Diamond would connect intermittantly but then say 'not avaiable' after a period of time, or when trying to reconnect after diasbling/enabling wi-fi in the comms manager. Also, after restarting my router the device would connect for a while but not seem to 'hold' it's connection.
When the device was 'connected' I could not get opera/youtube to load a page, even though I could see the diamond in my router's log showing it connected with a leased ip address. What made it so annoying was that every other wireless mobile device/laptop I have owned has connected without any problem at all, leading me to beleive there was a problem with the phone. Again, this was rather frustrating as the phone was detecting avaliable networks but just not 'holding' the connection nor 'using' the connection in opera/explorer etc.
After searching on xda-developers and other forums for a possible known issue, I tried all the various suggestions including;
i/ increasing to best performance under power mode in Wireless LAN settings
ii/ Hard reset of router (even though other wireless devices were connected fine)
iii/ trying static rather than dynamic ip for my diamond in router settings
iv/ disabling any security/encryption on my router
v/ entering DNS settings in manually into my diamond
vi/ changing 'connect to' under wi-fi neteorks to 'Work' rather than 'the internet'
vii/ tried various roms
and other suggestions I had read about - all which didn't make a difference!
I was about to send the diamond back to Orange (here in the UK) but decided to give it one last go and change my router. I bought a Netgear WGT624 for 25 quid from PC today world and my diamond connected
straight away without an issue, and opera/youtube/messager all connected straight away to the internet. I have not lost connection once. So thats how I resolved it - obviously my device did not like 802.11b (on the original dlink router) even though all previous smartphones have connected fine and the diamond's wireless adapter is labelled b/g.
Hope that stops anyone wasting a week like I did, I would try it out on another router before making any decisions because the chip in the diamond seems a lot more picky to what it connects to than anything I've used in the past!
cheers

Linksys WAG54 is OK, Freebox is not perfect
It really seems to depend on the WiFi router.
I've had probems with my French Freebox (my ISP's ADSL+wifi router) using WPA2 AES. It would work fine, for half an hour maybe, then it would stop. It says it's connected but there is no data transfer. You can switch WLAN off and on, soft reset the phone... nothing will do. Then it will work again later on.
I downgraded encryption to TKIP and i experienced the same problem.
But then I've tried my old Linksys WAG54G router, using the exact same encryption protocol and key and it works perfectly (for hours)!
I've also tested free access (Paris public Wifi, Mc Donald's...) and they work fine.
As my ISP wifi box does not let me have a look at all the settings (beacon time, etc.) it is very difficult to tell what makes it not-so-compatible with my Diamond... But there must be something.

PPPoE on Android?

Hi,
I have an interesting problem. I am in Dubai, where the ISP (Etisalat) provides Internet via Fiber-optic cables to my residence. They have this modem which I connect my wi-fi router to.
After connecting to my wi-fi router the usual way, I have to dial-in via a Broadband PPPoE connection, where I provide the ISP username and password. I have to do this every time I connect to the Internet.
Unfortunately, this means I cannot connect my Nexus One to the Internet This is because I am not aware of any app/functionality that enables PPPoE dialing on Android.
I had installed Connectify for Windows 7 that enabled me to share my authenticated Internet connection with other devices (and hence my N1). However, after FR83, this seems to have stopped working as well, for some reason. It is extremely difficult to connect to the shared Wifi created by Connectify, and even after connecting, I cannot browse the Internet.
I have already tried setting a static IP address for the N1, but this did not resolve the issue.
Can anybody offer guidance, ideas? Any help would be much appreciated!
Cheers,
PI

Get a router, set the router to connect through PPPoE and every device that connects to the wireless router will work.

Thanks, but I wouldn't want to spend more money...
lorin.bute said:
Get a router, set the router to connect through PPPoE and every device that connects to the wireless router will work.
Click to expand...
Click to collapse
Thanks, but I wouldn't want to spend more money on another router. I have a Wi-fi router already, but I don't know if it has the ability to connect via PPPoE. It's a 3COM 3CRWDR200A-75.
Will try and research if I can enable PPPoE via this somehow.
Cheers,
PI

Protocol Set: Dynamic and static IP addressing, DHCP Server, NAT/PAT (with TCP and UDP), PPTP/PPPoE, CHAP, IPCP, SNTP.
http://www.3com.com/products/en_US/detail.jsp?tab=prodspec&sku=3CRWDR200A-75&pathtype=purchase
There you go.
Set your current router to connect through pppoe and you are ready.
Good luck.

droid does
https://market.android.com/details?id=com.cnddu.wifipppoe&feature=search_result

I believe ur wifi "router" is only a wifi access point...

just download wifi pppoe

elgarteo95 said:
I believe ur wifi "router" is only a wifi access point...
Click to expand...
Click to collapse
More accurately, it is a router that happens to have a wireless interface. Most home wireless routers usually have the functionality of a switch as well (that is, providing multiple connections to the same local network), but they usually include routing capability to move traffic from your local area network to the Internet.

Hi guys. I have not access to market because of my region. Can any body get me the WIFI PPPoE ?

wifi pppoe doesnt work for me