hey, does anyone know of any keyboards that would allow me to type as if i had a normal cellphone? for example, 2 is abc, 3 is def, etc? i like to text while i drive, but the pocket cm and resco ones are too small
i upgraded to a cooked kaiser rom and noticed that there is a SIP named Phone Pad and its is pretty large and does T9 as well.. Not sure if it was on the Tilt rom or not but you can give it a shot!
Try this ... http://www.ipmart-forum.com/showthread.php?t=135015&highlight=phonepad
hello,
i'm running on duttys wm6.1 rom, but there are only pcm and the symbol pad installed...
i want to have the standard windows mobile on screen keyboard? is there any way to reactivate it?
is there a cab somewhere?
i searched the forums, via the google enginge but found nothing helpful, only the allpication SIPChange which can't bring the standard keyboard back.
thanks for any help
greetings garfield
Don't know about the windows original onscreen keyboard, but you can download and install TouchPal v3.5, the standard version is free and works way better than the original windows keyboard
http://www.cootek.com/
Hi,
I don't know what I've done, but when I'd like to write some message, or whatever, the original keyboard (full qwerty, or compact qwerty) keyboard starts up with the symbol pad and it's not possible to switch it back to alphanumeric mode. The only way is to invoke keyboard switch menu and select the same keyboard again. then it works as usual. Does anybody have the same problem?
as I said, I don't know, what I've done, or installed, bud I think, I've installed Advanced config 3.0 recently
I have the same problem... I also don't know what is wrong.
I also tried to disabled T9 with some tricks... that's all...
Some suggestions??
Thnx
Since yesterday I also have a problem with my HTC keyboards.
All 3 options, Qwerty, Compact Qwerty and the phonepad only gives me numbers.
I have tried all the settings.
It does not make a diverence if i turn of T9.
On the keyboard i can see the nummbers and the letters.
This is very irritating, can somebody please help?
Or is there an original cab version, al the cabs i can find are Qvga.
I have tried the Touch keyboard and it gives letters in stead of numbers, but its Qvga.
Thanks
Same problem here on the CDMA Diamond, I tried two different ROMs already the Sprint Stock ROM and a Telus Custom Juicy's 2.0 ROM. I can't use it at all and I hate doing a Hard Reset. Someone shed some light on this please.
Same problem here, have tried everything
Well I solved the problem by uninstalling PCM Keyboard... Too bad, I really liked it
Does anybody know if it's possible to run pcm keyboard without having this issue on the diamond?
since day 1 my keyboard did not show predict text ? anyone can help me ?
I had the same problem , it appeared from nowhere ..
After also trying different tricks , i solved the problem using Resco Keyboard
Pro ... It also responds much better to my taste with the touch screen
interface of the diamond.
I have had this problem on the Touch Pro too having used PCM keyboard.
Unistalled it and all back to normal.
Pity.
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
chris2.0 said:
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
Click to expand...
Click to collapse
How do you use copy & paste with PCM? Which version of PCM keyboard are you using?
Hi, do you have a problem when you need to type text message but only one hand is free? Standard on screen keyboard has to small letters, for me it is impossible to use hardware keyboard with one hand. It will be great to install keyboard which will mimic standard mobile phone keyboard one click on 1 will type a, two clicks b, and so on… and which will cover half of screen similar to keyboard which pop ups when you are calling someone.
It will be great if someone posts link where I can download that additional keyboard for wm6.1
Thanks
Your Solution
http://pocketcm.com/index.php
Have Fun, Its free.
Just install cab, restart phone and then select PCM Keyboard from drop up menu for keyboard.
Any Probs, Message Me.
pericaperica said:
Hi, do you have a problem when you need to type text message but only one hand is free? Standard on screen keyboard has to small letters, for me it is impossible to use hardware keyboard with one hand. It will be great to install keyboard which will mimic standard mobile phone keyboard one click on 1 will type a, two clicks b, and so on… and which will cover half of screen similar to keyboard which pop ups when you are calling someone.
It will be great if someone posts link where I can download that additional keyboard for wm6.1
Thanks
Click to expand...
Click to collapse
there are a lot of keyboard you could use for your device. All you have to do is a small and simple search with google, altavista or if you prefer in this forum too.
btw, you can look for Cooteck Touchpal, PocketCm, Resco Keyboard, Spb Keyboard and of course the one extracted from Diamond (P1TATER or similar)
good luck and sorry for bad english.
fausto
Sorry to say it, but for one hand operation I don't think anything beats the standard cell phone hardware keypad.
there is this HTC keypad.cab..that looks like the conventional cellphone keypad hardware..im still looking for it too
Check out the Touchpal keyboard before you make your decision once you get used to it you can type faster with one hand then some people with two.
http://cootek.com/
-McMex
mcmexican said:
Check out the Touchpal keyboard before you make your decision once you get used to it you can type faster with one hand then some people with two.
http://cootek.com/
-McMex
Click to expand...
Click to collapse
Just wanted to say thanks. I hated this type of keyboard with it no individual key layout when I tried a similar version before. BUt this one is great.Takes some getting used to but I going to give it a week and see how it goes.
Many thnks!
No problem once I got used to it there is no comparison I hardly even use the hardware keyboard because it is slower than Touchpal. Good Luck
-McMex
what do you guys think about the Resco Keyboard Pro. I have been using that and seems ok.
All apologies for the unintentional hijack, but I installed PCM Keyboard and also Touch Diamond Keyboard, but now word completion no longer works. They work great, but I checked word completion settings and it is set, but no longer suggests words. Is this normal?
paypalbid said:
what do you guys think about the Resco Keyboard Pro. I have been using that and seems ok.
Click to expand...
Click to collapse
I'm still using it despite installing/trying other keyboards...
oriki said:
I'm still using it despite installing/trying other keyboards...
Click to expand...
Click to collapse
I found it to be the best. I downloaded some nicer iSkin layouts
Every time I try to use the PocketCM, nothing happens when I change to it in the menu where I can select which entry type I want.....what am I doing wrong?
I have used all other keyboards including Resco etc but I have found that SPB Keyboard is now the best. It has an option to have the keyboard in landscape mode and it becomes very big, enabling one to type with one hand very easily. Try it out. It also has many skins available for download from SPB's site.
MACkjam said:
I have used all other keyboards including Resco etc but I have found that SPB Keyboard is now the best. It has an option to have the keyboard in landscape mode and it becomes very big, enabling one to type with one hand very easily. Try it out. It also has many skins available for download from SPB's site.
Click to expand...
Click to collapse
i agree spb keyboard is great, but how do you make it as the default keyboard? it seems that after a soft reset the keyboard goes to the orig. one and have to select spb KB again.
I tried all keyboards and didn't like any. Then I found "EZ input". It works best for me.
try/google for SPB KEYBOARD v4.x
in my opinion, the best keyboard i've ever tested (and i've tested a lot of..)!
unfortunately it isn't freeware.. but the money worth(?) it
marlon22701 said:
i agree spb keyboard is great, but how do you make it as the default keyboard? it seems that after a soft reset the keyboard goes to the orig. one and have to select spb KB again.
Click to expand...
Click to collapse
If you activate the Spb Keyboard, Tap on the sip arrow, go to Spb Keyboard Options>System tab then check box to make it default keyboard. Then it is always there even after soft resets. There are also several different skins to download for free from Spb's site. My favourites are skin4 and stainless. I use skin4 all the time now because keys are nice and big for my fingers.
MACkjam said:
If you activate the Spb Keyboard, Tap on the sip arrow, go to Spb Keyboard Options>System tab then check box to make it default keyboard. Then it is always there even after soft resets. There are also several different skins to download for free from Spb's site. My favourites are skin4 and stainless. I use skin4 all the time now because keys are nice and big for my fingers.
Click to expand...
Click to collapse
hi, thanks for the response.
i did that already and even in the input method but every after soft reset the keyboard is the one appearing and not the spb KB, i have to select it again.
FingerTouch v1.0
I found FingerTouch v1.0 and I think Is´s better then SPB Keybord, because FingerTouch have relly big buttons and with this keybord is relly possible to write with one hand during walking. If I were you I would try It because It´s excelent keybord. It has 4 or 5 types of keybords and you can download a lot of skins.
I think i just found out that EZInput is a HTC addon only working with touchflo (which is called manilla?). Could someone confirm/deconfim that please?
I'm running a ROM called Revolution which runs titanium (without touchflo) - it frees up more ram which i really like (i kept running out of ram).
I really really hate that qwerty keyboard since it's so hard to hit with a finger (not using the stylus a lot) i remembered the old htc input thing that would put 2 or 3 letters on one button (old t9 style or the compact thing i think it's called?)
How can i install a keyboard that does that for my titanium?
Nope EZInput works with both Manila and Titanium. I think the input you're refering to is called the Phone Keypad. You could try out my latest ROM, you can choose between Full Qwerty, Compact Qwerty, Phone Keypad and Swipe inputs. (please read the instructions before you install my ROM)
...but if you want to stay with your current ROM then there is a registry edit that you can do to change your current input to Phone Keypad.
Ok thanks for the input I might check out your ROM, atm fighting to get WiFi working again...