I think i just found out that EZInput is a HTC addon only working with touchflo (which is called manilla?). Could someone confirm/deconfim that please?
I'm running a ROM called Revolution which runs titanium (without touchflo) - it frees up more ram which i really like (i kept running out of ram).
I really really hate that qwerty keyboard since it's so hard to hit with a finger (not using the stylus a lot) i remembered the old htc input thing that would put 2 or 3 letters on one button (old t9 style or the compact thing i think it's called?)
How can i install a keyboard that does that for my titanium?
Nope EZInput works with both Manila and Titanium. I think the input you're refering to is called the Phone Keypad. You could try out my latest ROM, you can choose between Full Qwerty, Compact Qwerty, Phone Keypad and Swipe inputs. (please read the instructions before you install my ROM)
...but if you want to stay with your current ROM then there is a registry edit that you can do to change your current input to Phone Keypad.
Ok thanks for the input I might check out your ROM, atm fighting to get WiFi working again...
Related
Hi,
I don't know what I've done, but when I'd like to write some message, or whatever, the original keyboard (full qwerty, or compact qwerty) keyboard starts up with the symbol pad and it's not possible to switch it back to alphanumeric mode. The only way is to invoke keyboard switch menu and select the same keyboard again. then it works as usual. Does anybody have the same problem?
as I said, I don't know, what I've done, or installed, bud I think, I've installed Advanced config 3.0 recently
I have the same problem... I also don't know what is wrong.
I also tried to disabled T9 with some tricks... that's all...
Some suggestions??
Thnx
Since yesterday I also have a problem with my HTC keyboards.
All 3 options, Qwerty, Compact Qwerty and the phonepad only gives me numbers.
I have tried all the settings.
It does not make a diverence if i turn of T9.
On the keyboard i can see the nummbers and the letters.
This is very irritating, can somebody please help?
Or is there an original cab version, al the cabs i can find are Qvga.
I have tried the Touch keyboard and it gives letters in stead of numbers, but its Qvga.
Thanks
Same problem here on the CDMA Diamond, I tried two different ROMs already the Sprint Stock ROM and a Telus Custom Juicy's 2.0 ROM. I can't use it at all and I hate doing a Hard Reset. Someone shed some light on this please.
Same problem here, have tried everything
Well I solved the problem by uninstalling PCM Keyboard... Too bad, I really liked it
Does anybody know if it's possible to run pcm keyboard without having this issue on the diamond?
since day 1 my keyboard did not show predict text ? anyone can help me ?
I had the same problem , it appeared from nowhere ..
After also trying different tricks , i solved the problem using Resco Keyboard
Pro ... It also responds much better to my taste with the touch screen
interface of the diamond.
I have had this problem on the Touch Pro too having used PCM keyboard.
Unistalled it and all back to normal.
Pity.
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
chris2.0 said:
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
Click to expand...
Click to collapse
How do you use copy & paste with PCM? Which version of PCM keyboard are you using?
is there a fix to allow my phone styled keypad and compact qwerty to write letters instead of numbers. Even if the letters are selected. This makes it extemely hard to write texts when one the move as i have to use the full qwerty which now does not wish to return to letters, after inserting a new contact!
so far i have tried swithcing keyboards back and forth and a soft reset. is there a CAB to update this keyboard or anything like that.
I have tried searching but the search function returns pretty much every post with the word keyboard in it which isnt too handy!
cheers
Aaron Neal
i've had that problem with the diamond keyboard installed on my touch pro, and all i did was switch to the standard windows keyboard, and then back to the phonepad and it works fine. if you need to, you could reinstall the diamond keyboard, its on here somewhere in this forum.
ou2mame said:
i've had that problem with the diamond keyboard installed on my touch pro, and all i did was switch to the standard windows keyboard, and then back to the phonepad and it works fine. if you need to, you could reinstall the diamond keyboard, its on here somewhere in this forum.
Click to expand...
Click to collapse
i have been looking, but like i said i get every single return of 'keyboard' in the search!
I have recently updated to a fairly stripped down ROM (it only included the bog standard Keyboard thts way too small to use with finger).
I really like the HTC Keypad as it's easy as hell to use - but I've just tried to install it by installing EZinput and its showing about half the proper resolution - I think its QVGA. This has been a problem now for about 3-4 days and I absolutely despise having to use a QWERTY keypad. Currently got SPB keyboard on it (tried Resco too but its rubbish).
Can anyone upload their original diamond keypad or even an installation cab with all the VGA keyboards in? (qwerty, phone keypad etc).
Would be a great help!
Thanks guys.
http://forum.xda-developers.com/showthread.php?t=490587/
download the keyboard of your choice (with arrow or without arrow)
That should work for you
does this have a keypad as in standard with * and # keys?
1 2 3
4 5 6
7 8 9
* 0 #
That style? Thats the one im looking for!
Thanks btw! didnt even know that site existed
This is the alternative if you want it in a keypad format
http://forum.xda-developers.com/showthread.php?t=426281
The difference between that and the previous one is there is no XT9 which is similar to T9 but with word prediction. Hope this helps
You my friend -
are the biggest legend in the world. Thats the stock VGA diamond one - and thats what I wanted!
Thank you so much.
p.s the damn no-arrows diamond2 one wont work... any idea why?
it wont let me select it :-(
Try this one: http://www.everythingdiamond.info/downloads/Savage25rcracer_TD2_K_NA.cab
That's the one that I cant select! :-(
Think I'll just need to change ROMs again.
Woooo. :-(
Just tried to install that keypad linked - wont work. Also wont uninstall.
The one with the arrows works but its damn annoying.
I have an AT&T tilt that has been out of commission for some time, finally repaired the screen and put it back to work. I decided to try the HTC Western EzInput since it was the same as on the new Tilt II and Pure that I've been looking at.
I put it on and everything runs as documented, just some SIP change issues and everything else seems fine, except the hardware keyboard function layout is all wrong. I have searched forums and google and can't find a keyboard layout file that matches this keyboard. This is not an issue to be fixed with the tilt keyboard fix, its more than just a couple symbols off, I can't even type numbers at all with the hardware keyboard.
I know I need a 4 row, 29 key, keyboard layout file to make this work properly with the eT9 settings, but I just can't seem to find one. I also can't seem to find the information needed to modify one of the existing layout files to match.
Any help would be greatly appreciated. I am trying to adjust myself to using touch only, but their are situations where the hardware keyboard is just more useful.
Oh and btw, I am using shifu's WM6.5 WWE V4.2 rom and loving it, just want my hardware keyboard working properly
Double that for me as well. Every version of ezinput 2 i have found so far for qvga f*** up my keyboard layout. If there is a version that don't, I would love to see it.
What I would have to do was once I installed EZInput, I'd install the Tilt Keyboard fix (you can easily search the forum) then soft reset.
http://forum.xda-developers.com/showthread.php?t=334911
Hi @ all,
i want to share my experience with the mini bluetooth keyboard PX-2563 from Generalkeys (ordered at www.pearl.de) and my hd2 running WinMo 6.5 orig. Vodafone german ROM 3.14. First of all i have to say this keyboard is low-priced and in my opinion this is good It makes a cheap impression and i will see how long it will run. The keys are made of soft rubber, but you have to press it relative hard. So for the first time i am not faster than with the on-screen keyboard.
The keyboard is delivered with a driver-cd. Don´t touch it if you want to use it with your hd2! There is an old version of blueinput on it but this is useless for me.
My solution to get it running and have the german layout:
1. Install Fingerkeyboard 2.1 from this great forum and only activate ger as language in the options.
2. Install AEKMAP 1.3 (it´s free, you don´t need to activate it)
3. Use the .aek-file with the correct layout (attached to this post)
4. pair the keyboard with your HD2
5. have fun
So you will have in round about 20 min. this keyboard running with a nearly perfect german keyboard layout
Infos about my attached keyboard-layout:
This is my first version for this keyboard. Most keys/characters are working. The ALT-Key is NOT working. Use CTRL instead of ALT! (CTRL+q for @, CTRL+e for €, CTRL+m for \). Umlauts and special characters are also working.
regards, interceptor
Thanks a lot for this post! I received my Pearl keyboard today and was very unhappy with the delivered software and the keyboard layout! I am using it right now with a HTC HD2 and the suggested software...
Unfortunatly the "€" is not mapped as it is not mentioned in the .AEK file. I'll try to get a clue how this mapping file works and maybe the ALT key will work some day
Best regards, CN
CinqueNavigator said:
Thanks a lot for this post! I received my Pearl keyboard today and was very unhappy with the delivered software and the keyboard layout! I am using it right now with a HTC HD2 and the suggested software...
Unfortunatly the "€" is not mapped as it is not mentioned in the .AEK file. I'll try to get a clue how this mapping file works and maybe the ALT key will work some day
Best regards, CN
Click to expand...
Click to collapse
OOOPS! My fault. Now the attached aek-file in the first post has the €-sign and you can use it via CTRL+e. please download it again.
regards, interceptor
Hi,
I know this is an old thread but i'm actually running into the same problem with a French-layout Logitech Dinovo which, when paired with both my HD2 or HD Mini running WinMo 6.5, is recognized as English (qwerty).
I'd be curious to know how to proceed:
1/ choose fingerkeyboard as phone keyboard (?)
1'/ make sure AEK has the right layout selected
2/ pair with external keyboard
The only problem would be: i don't have the french layout compliant with the Dinovo (and support seem unable to help me with this matter). How could i make one ? Does that need special skills or a special software ?
Many thanks in advance...