Hi,
I am having a strange issue with my Tilt. When using WMplayer, certain MP3's make the device perform a soft-reset.
I can replicate the same behavior by playing the same songs again and it will soft-reset at the exact same spot in the song.
Has anyone else experienced this issue?
iboj007 said:
Hi,
I am having a strange issue with my Tilt. When using WMplayer, certain MP3's make the device perform a soft-reset.
I can replicate the same behavior by playing the same songs again and it will soft-reset at the exact same spot in the song.
Has anyone else experienced this issue?
Click to expand...
Click to collapse
What rom are you using? I have seen this issue reported in 2 or 3 rom threads if memory serves me correctly?
AT&T Stock Tilt ROM
1.57.502.2
have you tried to hard reset
Occasionally I have a problem where when making or receiving calls I pick up and there is no sound. If I Soft Reset I can make the call and it works fine. It's been starting to happen more often recently, and is really bugging me. It happens both when I'm using the phone speaker, and my headset.
what rom are you using? I have noticed the same thing the last couple of days since upgrading to L26 M2D v1
ah, here it is the same thread.
I use WM 6.1 htc version
Is there no bugfix?
Have you tried flashing a new radio?
Ta
Dave
data at info:
ROM: 3.28.407.0 GER
funkempfänger (i guess it's the radio): 1.65.16.25
protocoll: 25.83.40.02H
it was updated with the new htc 6.1 version what i've heard.
or can i downgrade it to a version that is working fine? when yes, where is the file to do so..
Right now I'm using Radio 1.58.16.27, I'll try another one, which do you recommend?
I was using 1.65.29.22, switched to 1.65.24.36 (I was using this with L26 diamond V12 with no issues)
had the same issue today.
hm, looks like a big upcoming problem for everyone...
what roms does everyone have? any "recently added" apps or changes?
ill start
L26_KaiserTouch_V1_M2D
NETCF 3.5
HTC AudioManager_2_0_1819_2129
Opal stuff
virusv69 said:
what roms does everyone have? any "recently added" apps or changes?
ill start
L26_KaiserTouch_V1_M2D
NETCF 3.5
HTC AudioManager_2_0_1819_2129
Opal stuff
Click to expand...
Click to collapse
Old thread but still, I've been experiencing this issue on the Hyperdragon series of ROMs from late October. Also had this problem in the past on some of Dutty's roms. The latest Raphael version (15/11/2008) has not exhibited this problem in 4 days. Only difference I can see is a slightly newer version of MSVC (1.6.19965).
Cheers.
gatewayer said:
hm, looks like a big upcoming problem for everyone...
Click to expand...
Click to collapse
I am getting the same problem intermittently, with a soft reset as the solution.
I am running a bone stock AT$T rom,recently upgraded to 6.1. It started happening post upgrade.
An upgrade problem?
same here... im playing around with different radios, it has to be a radio issue imo
I would just love to have this issue solved. It's not new whatch here; http://forum.xda-developers.com/showthread.php?t=383539
Peregrine
1stPeregrine said:
I would just love to have this issue solved. It's not new whatch here; http://forum.xda-developers.com/showthread.php?t=383539
Peregrine
Click to expand...
Click to collapse
My phone rings and notifies just fine when Texts,emails and calls come in. It answers just fine, but there is no sound. Then when I try to call people back, there is no dial sound and the call appears to not go through, until I do a soft reset, then all is back to normal.....................for a while.......................
I'm having this issue also. The other party can hear me when I answer, but I can't hear anything after the initial incoming-call ringing. A power-cycle restores normal operation but only for a while.
ROM: 3.28.405.0 WWE, 05/02/2008
Radio: 1.71.09.01
Protocol: 25.75.40.02.eMo
I'm in same boat as everyone else here.
Sometimes my phones rings, but when I answer I have no sound and other party can't hear me. Other times, my phone doesn't ring and all audio is muted (despite volume on). Soft reset is the only thing that works for me.
I gotta say this is really pissing me off. I'm missing lots of important calls because my phone doesn't ring when it should, or if I'm lucky it rings but has no audio so I have to soft-reset and wait 5 minutes for my phone to reboot & re-establish signal all whilst my clients are trying repeatedly to call me.
I'm willing to try other radios, but no one seems to have any working suggestions.
Thought maybe it was software, since I don't remember this happening after my initial WM6.1 upgrade. Uninstalling S2U2 didn't work (happened again today). Just uninstalled Voice Command, too, but haven't tested yet. VC's been flaky since upgrading to 6.1, working sometimes, failing to announce calls other times, plus occasional VC crashes at boot claiming "out of memory" which is blatantly untrue.
Just out of curiousity, is everyone with this problem using Voice Command, or just some of us?
Think I might have to go back to WM 6.0 since 6.1 didn't solve my Bluetooth issues plus screwed up Destinator...oh well. Schap's WM6 4.31 was best ROM anyway.
Anyone having any luck with this problem?
Like I said, I was running AT$T WM6 with no issues. The I updated to WM6.1 and started having these call issues.
Last week I flashed to HD III still no joy. SJ says that he is running the same radio as me, 1.65.24.36 with no problems.
Is it " my " phone? Microsuck 6.1 ? The radio ? Has anyone solved this with a new radio flash ?
I run a business on this phone and it is getting really frustrating, I don't want to go back to 6.0 just so I can get my phone calls?
I'm not just whining, looking for sucess stories.
Hi, havent been here in a while but i thought i'd add to the list. I have recently flashed HD3 (one of the early november editions) and it was without problems until friday when i dropped my fone. Ever since then i have had the intermittent sound in call which is only fixed by a soft reset (exactly the same as denco7). I haven't changed the radio since dutty's 1st diamond rom (a while ago) as i haven't had any problems but now im thinking about it.
Current setup (from device info):
ROM version: HD_III_Jade WWE
ROM date: 09/30/08
Radio version: 1.65.24.36
Protocol version: 25.94.40.06H
Not using MSVC
Recently flashed to HD III Blackstone hoping this might work but still having the problem.
I also flashed radios 1.65.24.36 and 1.70.18.02
and now I am running 1.70.19.09....... and it is still happening. It has got to be something in WM 6.1. Cannot be a software conflict, because it was happening when I was running bone stock AT$T 6.1 upgrade with no software add ons.
Again, I would hate to think that I have to downgrade to 6.0 just to get my phone calls.
Damn WM6.1 sound!
Well, I thought I'd let everyone know that I've uninstalled all my favorite apps from my Kaiser. No MSVC, no S2U2, occasional hands-free Bluetooth, and no A2DP. In that time, I've had only 2 incidents of no sound for the last 3 weeks--much better than no sound every few days or even several times a day. Don't know that the apps have anything to do with it since denco7 had same problem on an unadulterated AT&T ROM.
The big question is why do we all have the same sound problem but most WM6.1 Kaiser users do not (if everyone did I'm sure there would be a lot more *****ing). If we could reproduce it at will, we'd at least have something to focus on. Not knowing that, I'll have to guess and say that I suspect one or more of the following:
WM6.1 and/or the 1.65+ radios required for WM6.1 introduced some sound bug (deadlock, dereferenced pointer, etc.). The more apps that interact with sound and/or the radio, the more likely the bug will be triggered. But even if this is true, why does it happen to us but not to others?
The bug exists only in a particular base ROM source used by the ROM cookers. Still, should be affecting more people.
Maybe people who customize their phones are more likely to reset and clear any conditions that lead to no sound? Doesn't seem likely, but hey...
The problem exists only in specific Kaiser versions, perhaps even in conjunction with only specific WM6.1 builds and/or radios. I think there's been 5+ different hardware versions of the Kaiser line, but I can't find where I read this or how to tell what version your Kaiser is.
Bluetooth affecting sound? Got absolutely nothing to back this up other than WM6.1 supposedly fixed a lot of Bluetooth problems and during the time of my frequent lockups, I was using A2DP to stream an audiobook to my car's Parrot MK6000. Finished the audiobook & quit traveling so much, so I rarely used Bluetooth during the last few weeks when I've had only 2 no sound incidents. BTW, I upgraded to WM6.1 specifically because of the Bluetooth fixes, hoping they fixed the 100% CPU usage after finishing a hands-free call and fixed the A2DP dropping after calls. WM6.1 didn't fix either, so what did they do? Maybe their "fixes" just introduced new problems?
Possible dead zone f'ing up the radio and consequently sound? I offer this only because when I was working in a particular dead zone I had frequent sound problems. For some reason, my phone has problems reconnecting after leaving this dead zone and I have to reboot. Occasionally it would reconnect without rebooting, but I never correlated this to no sound. However, I haven't been there in weeks, and my problems with sound decreased (although I also uninstalled apps & quit using Bluetooth as much). Went there last Friday, and while I was there I found I had no Windows sounds. Could dead zones or even just temporary signal loss be f'ing up the radio and consequently the sound?
These are all just guesses--I'm just throwing out some possibilities so we can find something in common between us. However, I gotta say that if I don't find a solution soon, I'm going to switch back to WM6. Threaded messages are nice, but they're not worth this no sound headache.
BTW, I'm using:
AT&T Tilt (purchased within a month of initial release)
ROMeOS v4.21.1 (OS v5.2.20273, AKU 1.3.3)
Radio 1.71.09.01
MMS are not coming until I won't wake up the phone. This is very annoying issue.Sometimes it wakes up but more often doesn't. I'm using original newest HTC rom 2.03. Any solution and opinion for that ??
This is a known issue which HTC fixed with a new ROM 3 days ago (16/01/2009) - for network-free/unlocked Diamonds at least:
Improved Functions and Fixes
1. When you launch the Camera while the system is working on other programs, the preview screen may become black.
2. When playing a video, sometimes a portion of the video will be cut off a little bit.
3. Fixes Audio playback problem with the speaker. Specific issues: sometimes the music will turn off and on after 10 minutes, or there is a buzzing sound or no sound at all.
4. Fixes the problem of not being able to receive MMS when in standby mode.
5. When launching music via the Music tab on TouchFLO 3D, the sound may intermittently turn off for a second and come back on.
http://www.htc.com/europe/SupportViewNews.aspx?dl_id=483&news_id=44
If your Diamond is network locked the download will not work so you will have to wait for your network's updated ROM.
HTH.
I have diamond sim free unlocked I bought it directly from HTC Distributor in my country.I'm not able to download this rom. What version is it??? -can I take it from somewhere else? I have HARDSPL etc ?
MMS work with the new ROM.
But the MMS notification has no sound and no vibration, even if checked in the settings.
Did you also experience this ?
pegaz said:
I have diamond sim free unlocked I bought it directly from HTC Distributor in my country.I'm not able to download this rom. What version is it??? -can I take it from somewhere else? I have HARDSPL etc ?
Click to expand...
Click to collapse
If you are talking about Polish distribution, seems there is no matching ROM yet. As I am interested in it too, I asked HTC support about date of release for my phone. They said they'll look into it.
I put hardSPL and upgraded to the newest 2.03 rom and MMS are working but I need s2u2 to lock my phone and with that it stops working.tried all possible s2u2 settings , exception,writing to A_C etc. and nothing. I don't wanna rotate my phone,shaking,light lock etc just wanna proper normal keylock like s2u2 does...
I have just update my HD with the WM 6.5 rom, everything was fine apart of the bluetooth, it never turns on and when i go to setting try to sort it out, it comes up with said bluetooth hardware wasn't installed or something, i have restart it million times and problem still remains, anyone could help me or its the problem of WM6.5?
Did you even try to question that on the cookers thread???????
Hi all,
Firstly, apologies if I am posting this thread in a wrong section but it seemed most relevant in the ROM section.
This is referring to the ringtones issue commonly found in WM 6.5 ROMs where the ringtones fail to play and the phone would not vibrate either on incoming calls.
I've used many WM6.5 Roms cooked by various chefs and found that after using the ROM for a little while a common problem starts happening....the phone will not ring or vibrate on incoming calls....a soft reset will resolve the issue temporarily but it will reoccur shortly after..
This seems a common issue...it does not appear to be...ROM version specific or chef specific. It seems to be a common issue with various WM 6.5 builds being used on the blackstone...perhaps its an issue that can be resolved or an issue that is simply happening due to incompatibility of WM6.5 with the blackstone.
I missed a very important call yesterday as the phone failed to ring/vibrate. I'm sure many of you have suffered the same issue and perhaps have had further problems as you may have missed an important call.
Please input your thoughts, if you've had the same issue....more importantly..has anybody been able to resolve this permanently? has anybody been using a particular WM 6.5 ROM and not having this issue?
I look forward to hearing from you all. Many thanks!
xeonedbody said:
Hi all,
Firstly, apologies if I am posting this thread in a wrong section but it seemed most relevant in the ROM section.
This is referring to the ringtones issue commonly found in WM 6.5 ROMs where the ringtones fail to play and the phone would not vibrate either on incoming calls.
I've used many WM6.5 Roms cooked by various chefs and found that after using the ROM for a little while a common problem starts happening....the phone will not ring or vibrate on incoming calls....a soft reset will resolve the issue temporarily but it will reoccur shortly after..
This seems a common issue...it does not appear to be...ROM version specific or chef specific. It seems to be a common issue with various WM 6.5 builds being used on the blackstone...perhaps its an issue that can be resolved or an issue that is simply happening due to incompatibility of WM6.5 with the blackstone.
I missed a very important call yesterday as the phone failed to ring/vibrate. I'm sure many of you have suffered the same issue and perhaps have had further problems as you may have missed an important call.
Please input your thoughts, if you've had the same issue....more importantly..has anybody been able to resolve this permanently? has anybody been using a particular WM 6.5 ROM and not having this issue?
I look forward to hearing from you all. Many thanks!
Click to expand...
Click to collapse
Well the Ringtones are not been saved as set was sometimes in some 6.5s norma, but missing an call without noticing it.. ?? well seems more to be an issue with the Radio ..? had some issues with the 1.17 Radio coupled with installed 1.14 Rilphone.dll, but since i have the Topix 3.6 or energy ROM 21899 or NRG 23544 or later ROM there is no issue... Even when the rilphone dll for the 1.15 Radio isn't installed... But exactly have this issue prev. where somebody called me, while in this time my phone module has restarted themself and didn't display me the call that was incoming...
So, the big question is: What are the ROM Build that are you using with what Radio and what dll.
senseipetz said:
Well the Ringtones are not been saved as set was sometimes in some 6.5s norma, but missing an call without noticing it.. ?? well seems more to be an issue with the Radio ..? had some issues with the 1.17 Radio coupled with installed 1.14 Rilphone.dll, but since i have the Topix 3.6 or energy ROM 21899 or NRG 23544 or later ROM there is no issue... Even when the rilphone dll for the 1.15 Radio isn't installed... But exactly have this issue prev. where somebody called me, while in this time my phone module has restarted themself and didn't display me the call that was incoming...
So, the big question is: What are the ROM Build that are you using with what Radio and what dll.
Click to expand...
Click to collapse
I'm using the G10Evo v3.01 and I've been using Radio 1.17. Previously I've experienced the same problem using Miri's ROMs.
Today I've done a fresh install G10Evo v3.01 and with Radio 1.13 to see if it makes any difference.
xeonedbody said:
I'm using the G10Evo v3.01 and I've been using Radio 1.17. Previously I've experienced the same problem using Miri's ROMs.
Today I've done a fresh install G10Evo v3.01 and with Radio 1.13 to see if it makes any difference.
Click to expand...
Click to collapse
Well, i have except the restarts of the GSM module under Miris ROMs no other issues.. But i thing it begans since i upgrade my Radio from 1.13 to 1.14 and later to 1.17.
senseipetz said:
Well, i have except the restarts of the GSM module under Miris ROMs no other issues.. But i thing it begans since i upgrade my Radio from 1.13 to 1.14 and later to 1.17.
Click to expand...
Click to collapse
Thanks for the input. I shall update on the progress. Hopefully it will be a radio issue and will not happen when using radio version 1.13.