Hi all,
Firstly, apologies if I am posting this thread in a wrong section but it seemed most relevant in the ROM section.
This is referring to the ringtones issue commonly found in WM 6.5 ROMs where the ringtones fail to play and the phone would not vibrate either on incoming calls.
I've used many WM6.5 Roms cooked by various chefs and found that after using the ROM for a little while a common problem starts happening....the phone will not ring or vibrate on incoming calls....a soft reset will resolve the issue temporarily but it will reoccur shortly after..
This seems a common issue...it does not appear to be...ROM version specific or chef specific. It seems to be a common issue with various WM 6.5 builds being used on the blackstone...perhaps its an issue that can be resolved or an issue that is simply happening due to incompatibility of WM6.5 with the blackstone.
I missed a very important call yesterday as the phone failed to ring/vibrate. I'm sure many of you have suffered the same issue and perhaps have had further problems as you may have missed an important call.
Please input your thoughts, if you've had the same issue....more importantly..has anybody been able to resolve this permanently? has anybody been using a particular WM 6.5 ROM and not having this issue?
I look forward to hearing from you all. Many thanks!
xeonedbody said:
Hi all,
Firstly, apologies if I am posting this thread in a wrong section but it seemed most relevant in the ROM section.
This is referring to the ringtones issue commonly found in WM 6.5 ROMs where the ringtones fail to play and the phone would not vibrate either on incoming calls.
I've used many WM6.5 Roms cooked by various chefs and found that after using the ROM for a little while a common problem starts happening....the phone will not ring or vibrate on incoming calls....a soft reset will resolve the issue temporarily but it will reoccur shortly after..
This seems a common issue...it does not appear to be...ROM version specific or chef specific. It seems to be a common issue with various WM 6.5 builds being used on the blackstone...perhaps its an issue that can be resolved or an issue that is simply happening due to incompatibility of WM6.5 with the blackstone.
I missed a very important call yesterday as the phone failed to ring/vibrate. I'm sure many of you have suffered the same issue and perhaps have had further problems as you may have missed an important call.
Please input your thoughts, if you've had the same issue....more importantly..has anybody been able to resolve this permanently? has anybody been using a particular WM 6.5 ROM and not having this issue?
I look forward to hearing from you all. Many thanks!
Click to expand...
Click to collapse
Well the Ringtones are not been saved as set was sometimes in some 6.5s norma, but missing an call without noticing it.. ?? well seems more to be an issue with the Radio ..? had some issues with the 1.17 Radio coupled with installed 1.14 Rilphone.dll, but since i have the Topix 3.6 or energy ROM 21899 or NRG 23544 or later ROM there is no issue... Even when the rilphone dll for the 1.15 Radio isn't installed... But exactly have this issue prev. where somebody called me, while in this time my phone module has restarted themself and didn't display me the call that was incoming...
So, the big question is: What are the ROM Build that are you using with what Radio and what dll.
senseipetz said:
Well the Ringtones are not been saved as set was sometimes in some 6.5s norma, but missing an call without noticing it.. ?? well seems more to be an issue with the Radio ..? had some issues with the 1.17 Radio coupled with installed 1.14 Rilphone.dll, but since i have the Topix 3.6 or energy ROM 21899 or NRG 23544 or later ROM there is no issue... Even when the rilphone dll for the 1.15 Radio isn't installed... But exactly have this issue prev. where somebody called me, while in this time my phone module has restarted themself and didn't display me the call that was incoming...
So, the big question is: What are the ROM Build that are you using with what Radio and what dll.
Click to expand...
Click to collapse
I'm using the G10Evo v3.01 and I've been using Radio 1.17. Previously I've experienced the same problem using Miri's ROMs.
Today I've done a fresh install G10Evo v3.01 and with Radio 1.13 to see if it makes any difference.
xeonedbody said:
I'm using the G10Evo v3.01 and I've been using Radio 1.17. Previously I've experienced the same problem using Miri's ROMs.
Today I've done a fresh install G10Evo v3.01 and with Radio 1.13 to see if it makes any difference.
Click to expand...
Click to collapse
Well, i have except the restarts of the GSM module under Miris ROMs no other issues.. But i thing it begans since i upgrade my Radio from 1.13 to 1.14 and later to 1.17.
senseipetz said:
Well, i have except the restarts of the GSM module under Miris ROMs no other issues.. But i thing it begans since i upgrade my Radio from 1.13 to 1.14 and later to 1.17.
Click to expand...
Click to collapse
Thanks for the input. I shall update on the progress. Hopefully it will be a radio issue and will not happen when using radio version 1.13.
Related
i went from 2.19 to 2.61 but not any better. can someone forward me the link to download 2.47.11 radio rom cab file?
i tried to search but when i put in the search field 2.47.11 radio rom, 21 pages of related topics pop up and i can't find anything in terms of downloading this rom.
thanks, m3m3
http://forum.xda-developers.com/showthread.php?t=279380
xeno1 said:
http://forum.xda-developers.com/showthread.php?t=279380
Click to expand...
Click to collapse
hey xeno,
seeing that you are senior member, i have some questions for you.
how do you like 2.69 rom? here is my situation that i am running into with my 2.19 radio rom.
i cannot receive signal in my house but as soon as i walk outside, it get 4 bars but it takes awhile to recover. i tried 2.40 before but during a call, i could not switch over with call waiting and sometimes, when i call my voicemail, i could not hang up. so, i went back to 2.19. 2 days ago, i installed 2.61 but i don't get any better signal strength than 2.19. but with 2.61, i am experiencing the same problem of not being able to hangup during a call or navigating through my voicemail box. it seems as though it doesn't recognize any button inputs or touch screen inputs.
i bought a longer lasting battery for my MDA so power drain is no issue. the main issue is reception which i will trade off with battery life.
my question to you is are you happy with 2.69 with regard to reception and recovery of lost signal?
maybe i should try 2.69...can you point me to the download?
i am running SPL 2.17/IPL 2.17 on Faria's Crossbow
thanks in advance.
-Mike
2.69 isn't bad, but I liked 2.47 a lot better. Unfortunately 2.47 has problems with 2.47. I know that there were people working on solving the problems with most of the radio versions not working with WM6 but I haven't checked those threads in a while to see if anyones has solved it or not. I know they were getting somewhere when it came to the cingular netwrok working with them but I have t-mobile so that won't help me much.
I'm not sure where the 2.69 rom is off hand and don't feel like searching for it at the moment so I'll just upload it for you. Try out 2.47 first though and see if it works well for you. The navigation problem problem through your inbox might not be a radio problem, there are a few roms that have problems with DTMS which sends the tones over an already connected call. Theres quite a few threads on here about that problem, just search DTMS and you should be able to find something on ways to solve that problem.
xeno1 said:
I know that there were people working on solving the problems with most of the radio versions not working with WM6 but I haven't checked those threads in a while to see if anyones has solved it or not. I know they were getting somewhere when it came to the cingular netwrok working with them but I have t-mobile so that won't help me much.
Click to expand...
Click to collapse
I've had 2.47 radio on a G3 ever since i flashed molki's 2.26 OS and have successfully used along with WM6 (since day one). Signal has always been strong even inside my house that is covered by a hill.
The only issue i'm experiencing is with TheEquinoxe's reTouched ROM and BT that pairs devices but they can't 'see' the phone but can't say if the radio is to be blamed for this.
i've searched for DTMS but the search pulled up nothing under Wizard except for this thread. any ideas??
xeno1 said:
2.69 isn't bad, but I liked 2.47 a lot better. Unfortunately 2.47 has problems with 2.47. I know that there were people working on solving the problems with most of the radio versions not working with WM6 but I haven't checked those threads in a while to see if anyones has solved it or not. I know they were getting somewhere when it came to the cingular netwrok working with them but I have t-mobile so that won't help me much.
I'm not sure where the 2.69 rom is off hand and don't feel like searching for it at the moment so I'll just upload it for you. Try out 2.47 first though and see if it works well for you. The navigation problem problem through your inbox might not be a radio problem, there are a few roms that have problems with DTMS which sends the tones over an already connected call. Theres quite a few threads on here about that problem, just search DTMS and you should be able to find something on ways to solve that problem.
Click to expand...
Click to collapse
mestrini said:
I've had 2.47 radio on a G3 ever since i flashed molki's 2.26 OS and have successfully used along with WM6 (since day one). Signal has always been strong even inside my house that is covered by a hill.
The only issue i'm experiencing is with TheEquinoxe's reTouched ROM and BT that pairs devices but they can't 'see' the phone but can't say if the radio is to be blamed for this.
Click to expand...
Click to collapse
Maybe it's just the .318 WM6 versions that have been having that problem then. Using any other radio versions with it other than 2.19 or 2.69 causes you to have a lot of missed calls.
m3m3, I'll have to do a little searching and see if I can find those threads for you. It's been a while since I've seen them.
Well, I figured out part of your search problem, it's DTMF not DTMS. Sorry about that.
Looks like reinstalling your phone dialer pad should fix the problem. The only other solutions I came across all involved doing a hard reset.
lol...thats fine man. after i installed 2.69 radio rom, i missed a buttload of calls especially from my wife which wasn't too good. had to go back to 2.19 radio. hopefully, someone can program a good radio rom that doesn't miss calls and increases reception otherwise, I will have to migrate to the iphone and to cingular (att)....
xeno1 said:
Well, I figured out part of your search problem, it's DTMF not DTMS. Sorry about that.
Click to expand...
Click to collapse
From previous thread started by me:
"During calls there comes a moment that people are complaining that they cannot hear me. When i move the jog dial upwards (hence increasing volume) they say that they can hear me ok. I have not experienced this using the bluetooth headset. Maybe a hardware problem??By the way i used 5 different radios and upgraded also to 6.1."
Well here is what i did. I sent the phone to htc hellas where they replaced the mic and the earphone. Problem not solved. Then sent it to htc uk where they replaced the speaker and the main board.Problem not solved.
Suddenly today while using the bluetooth headset i observed on the phone a sudden drop on the volume indicator while speaking (different indicator from the one while not speaking). Most probably a software error (windows mobile)?
So do u think there is any registry change, tweak which can keep the indicator constant on a certain level??
By the way i have also changed a lot of roms and problem remains.
Thanks
You have missed one important factor. THE RADIO!! Some ROM/RADIO combos dont work correctly. The camera and everything else will work, but sometimes when you talk to people they cant hear you and its got a static sound. I experienced this with certain rom/radio combinations, as soon as I changed the radio though, never had the problem.
So whats the radio you recommend for low battery consumption and compatible with duttys latest rom? By the way no static sound exists while people cannot hear me. Also i almost tried most of the radios but most of the times with duttys roms.
Thanks a lot
pantelis25 said:
So whats the radio you recommend for low battery consumption and compatible with duttys latest rom? By the way no static sound exists while people cannot hear me. Also i almost tried most of the radios but most of the times with duttys roms.
Thanks a lot
Click to expand...
Click to collapse
don't ask that question, most of us will refuse to answer it
pantelis25 said:
So whats the radio you recommend for low battery consumption and compatible with duttys latest rom? By the way no static sound exists while people cannot hear me. Also i almost tried most of the radios but most of the times with duttys roms.
Thanks a lot
Click to expand...
Click to collapse
Well Dutty's "latest ROM" would be the (June 7th)Diamond v1, another would be (March 24th)Diamond BETA, (April 29yh)Dutty's Hybrid. I am not sure which one you are using. What radio's were you using? The 1.65.xx radios on Dutty's Hybrid?
Yes i am using the latest diamond rom of duttys along the 1.65.16.25 radio.
Any better radio?
try the one in my sig ONLY if ur security unlocked.
anyone still with this problem or someone found a solution for it?
Hi All!
Currently having some issues with my Tytn.
1st problem!
Since upgrading to different Radio's - currently Dutty's V2. Hard spl 3.29
Receiving calls (incomming) only rings for about only 5 seconds. Which sometimes is not long enough for me to pick up. I cant find an option to extend the time on the phone before going to voicemail.I have had this problem since upgrading to 6.1. Tried every damn method with no luck... its driving me insane! Is anyone else having this problem?
2nd problem!
Since upgrading my Tytn to 6.1 with different roms my ringtones no longer works. when i go to phone setting and trying to select a ringtone a msg appear "this ring tone file is corrupted or unavailable"try reseting and using different roms with hard reset with no luck!
Any suggestion or how to resolve my issues ?
thanks in advance
Exactly what rom are you using?
And what radio(s) are you using?
SouthernLuke said:
Exactly what rom are you using?
And what radio(s) are you using?
Click to expand...
Click to collapse
Rom - Dutty's V2
Radio - 1.65.16.25
I also have the audio problem. It looks like it is missing some basic codecs . does anyone have a link for the standard codec for win mo 6.1
Similar issue with stock ROM
I've got the stock AT&T 6.1 ROM and I get the same issue, but not every time. It seems to happen to some callers, but not others, and I'm not sure it happens to the same callers all the time. When it happened this morning I heard one short ring, and the missed call icon lit up. The caller said it rang 5 times on her end. I was wondering if it had something to do with my forwarding settings with Youmail, but I haven't got around to checking.
Occasionally I have a problem where when making or receiving calls I pick up and there is no sound. If I Soft Reset I can make the call and it works fine. It's been starting to happen more often recently, and is really bugging me. It happens both when I'm using the phone speaker, and my headset.
what rom are you using? I have noticed the same thing the last couple of days since upgrading to L26 M2D v1
ah, here it is the same thread.
I use WM 6.1 htc version
Is there no bugfix?
Have you tried flashing a new radio?
Ta
Dave
data at info:
ROM: 3.28.407.0 GER
funkempfänger (i guess it's the radio): 1.65.16.25
protocoll: 25.83.40.02H
it was updated with the new htc 6.1 version what i've heard.
or can i downgrade it to a version that is working fine? when yes, where is the file to do so..
Right now I'm using Radio 1.58.16.27, I'll try another one, which do you recommend?
I was using 1.65.29.22, switched to 1.65.24.36 (I was using this with L26 diamond V12 with no issues)
had the same issue today.
hm, looks like a big upcoming problem for everyone...
what roms does everyone have? any "recently added" apps or changes?
ill start
L26_KaiserTouch_V1_M2D
NETCF 3.5
HTC AudioManager_2_0_1819_2129
Opal stuff
virusv69 said:
what roms does everyone have? any "recently added" apps or changes?
ill start
L26_KaiserTouch_V1_M2D
NETCF 3.5
HTC AudioManager_2_0_1819_2129
Opal stuff
Click to expand...
Click to collapse
Old thread but still, I've been experiencing this issue on the Hyperdragon series of ROMs from late October. Also had this problem in the past on some of Dutty's roms. The latest Raphael version (15/11/2008) has not exhibited this problem in 4 days. Only difference I can see is a slightly newer version of MSVC (1.6.19965).
Cheers.
gatewayer said:
hm, looks like a big upcoming problem for everyone...
Click to expand...
Click to collapse
I am getting the same problem intermittently, with a soft reset as the solution.
I am running a bone stock AT$T rom,recently upgraded to 6.1. It started happening post upgrade.
An upgrade problem?
same here... im playing around with different radios, it has to be a radio issue imo
I would just love to have this issue solved. It's not new whatch here; http://forum.xda-developers.com/showthread.php?t=383539
Peregrine
1stPeregrine said:
I would just love to have this issue solved. It's not new whatch here; http://forum.xda-developers.com/showthread.php?t=383539
Peregrine
Click to expand...
Click to collapse
My phone rings and notifies just fine when Texts,emails and calls come in. It answers just fine, but there is no sound. Then when I try to call people back, there is no dial sound and the call appears to not go through, until I do a soft reset, then all is back to normal.....................for a while.......................
I'm having this issue also. The other party can hear me when I answer, but I can't hear anything after the initial incoming-call ringing. A power-cycle restores normal operation but only for a while.
ROM: 3.28.405.0 WWE, 05/02/2008
Radio: 1.71.09.01
Protocol: 25.75.40.02.eMo
I'm in same boat as everyone else here.
Sometimes my phones rings, but when I answer I have no sound and other party can't hear me. Other times, my phone doesn't ring and all audio is muted (despite volume on). Soft reset is the only thing that works for me.
I gotta say this is really pissing me off. I'm missing lots of important calls because my phone doesn't ring when it should, or if I'm lucky it rings but has no audio so I have to soft-reset and wait 5 minutes for my phone to reboot & re-establish signal all whilst my clients are trying repeatedly to call me.
I'm willing to try other radios, but no one seems to have any working suggestions.
Thought maybe it was software, since I don't remember this happening after my initial WM6.1 upgrade. Uninstalling S2U2 didn't work (happened again today). Just uninstalled Voice Command, too, but haven't tested yet. VC's been flaky since upgrading to 6.1, working sometimes, failing to announce calls other times, plus occasional VC crashes at boot claiming "out of memory" which is blatantly untrue.
Just out of curiousity, is everyone with this problem using Voice Command, or just some of us?
Think I might have to go back to WM 6.0 since 6.1 didn't solve my Bluetooth issues plus screwed up Destinator...oh well. Schap's WM6 4.31 was best ROM anyway.
Anyone having any luck with this problem?
Like I said, I was running AT$T WM6 with no issues. The I updated to WM6.1 and started having these call issues.
Last week I flashed to HD III still no joy. SJ says that he is running the same radio as me, 1.65.24.36 with no problems.
Is it " my " phone? Microsuck 6.1 ? The radio ? Has anyone solved this with a new radio flash ?
I run a business on this phone and it is getting really frustrating, I don't want to go back to 6.0 just so I can get my phone calls?
I'm not just whining, looking for sucess stories.
Hi, havent been here in a while but i thought i'd add to the list. I have recently flashed HD3 (one of the early november editions) and it was without problems until friday when i dropped my fone. Ever since then i have had the intermittent sound in call which is only fixed by a soft reset (exactly the same as denco7). I haven't changed the radio since dutty's 1st diamond rom (a while ago) as i haven't had any problems but now im thinking about it.
Current setup (from device info):
ROM version: HD_III_Jade WWE
ROM date: 09/30/08
Radio version: 1.65.24.36
Protocol version: 25.94.40.06H
Not using MSVC
Recently flashed to HD III Blackstone hoping this might work but still having the problem.
I also flashed radios 1.65.24.36 and 1.70.18.02
and now I am running 1.70.19.09....... and it is still happening. It has got to be something in WM 6.1. Cannot be a software conflict, because it was happening when I was running bone stock AT$T 6.1 upgrade with no software add ons.
Again, I would hate to think that I have to downgrade to 6.0 just to get my phone calls.
Damn WM6.1 sound!
Well, I thought I'd let everyone know that I've uninstalled all my favorite apps from my Kaiser. No MSVC, no S2U2, occasional hands-free Bluetooth, and no A2DP. In that time, I've had only 2 incidents of no sound for the last 3 weeks--much better than no sound every few days or even several times a day. Don't know that the apps have anything to do with it since denco7 had same problem on an unadulterated AT&T ROM.
The big question is why do we all have the same sound problem but most WM6.1 Kaiser users do not (if everyone did I'm sure there would be a lot more *****ing). If we could reproduce it at will, we'd at least have something to focus on. Not knowing that, I'll have to guess and say that I suspect one or more of the following:
WM6.1 and/or the 1.65+ radios required for WM6.1 introduced some sound bug (deadlock, dereferenced pointer, etc.). The more apps that interact with sound and/or the radio, the more likely the bug will be triggered. But even if this is true, why does it happen to us but not to others?
The bug exists only in a particular base ROM source used by the ROM cookers. Still, should be affecting more people.
Maybe people who customize their phones are more likely to reset and clear any conditions that lead to no sound? Doesn't seem likely, but hey...
The problem exists only in specific Kaiser versions, perhaps even in conjunction with only specific WM6.1 builds and/or radios. I think there's been 5+ different hardware versions of the Kaiser line, but I can't find where I read this or how to tell what version your Kaiser is.
Bluetooth affecting sound? Got absolutely nothing to back this up other than WM6.1 supposedly fixed a lot of Bluetooth problems and during the time of my frequent lockups, I was using A2DP to stream an audiobook to my car's Parrot MK6000. Finished the audiobook & quit traveling so much, so I rarely used Bluetooth during the last few weeks when I've had only 2 no sound incidents. BTW, I upgraded to WM6.1 specifically because of the Bluetooth fixes, hoping they fixed the 100% CPU usage after finishing a hands-free call and fixed the A2DP dropping after calls. WM6.1 didn't fix either, so what did they do? Maybe their "fixes" just introduced new problems?
Possible dead zone f'ing up the radio and consequently sound? I offer this only because when I was working in a particular dead zone I had frequent sound problems. For some reason, my phone has problems reconnecting after leaving this dead zone and I have to reboot. Occasionally it would reconnect without rebooting, but I never correlated this to no sound. However, I haven't been there in weeks, and my problems with sound decreased (although I also uninstalled apps & quit using Bluetooth as much). Went there last Friday, and while I was there I found I had no Windows sounds. Could dead zones or even just temporary signal loss be f'ing up the radio and consequently the sound?
These are all just guesses--I'm just throwing out some possibilities so we can find something in common between us. However, I gotta say that if I don't find a solution soon, I'm going to switch back to WM6. Threaded messages are nice, but they're not worth this no sound headache.
BTW, I'm using:
AT&T Tilt (purchased within a month of initial release)
ROMeOS v4.21.1 (OS v5.2.20273, AKU 1.3.3)
Radio 1.71.09.01
Hi guys,
I''m new to this forum and I'm also new to HTC Diamond. However I found great guidance to "upgrade" my MDA Compact IV to HTCs original patched rom (1.93.407.1 GER) and had a radio update to 1.00.25.05, but after upgrading to these versions with Hard SPL oni 1.30, my phone is experience problems with phone calls. Whenver I'm at a phone call either I my HTC looses signal so that I cannot hear my counter part or It simply disconnects. I'm pretty annoyed with this and I dont know what to do.
Would appreciate answer on If some one is experiencing simliar problems or on a guideline to how to "cure" my phone.
Thank you!
And btw I'm also having this problem where I cannot hear the caller nor can the caller hear me the first 2-3 secs. Is this due to my upgrade? Or is It a radio prob or maybe the rom itself?
i would suggest changing the Radio... although i havent heard of problems with this radio version before (i am using it too)
Thanks for the reply mugglesquop. Neither have I heard of anything bad regarding this version, but I'm a bit worried. Can It be also a hardware defect? And If you would suggest me to switch to another radio, which version would It be? If I perform an upgrade of radio I will need to re-install rom as well. Is this true?