Hi,
I have a CDMA Touch from Telus Mobility in Canada.
The issue I am having is # rings with incoming calls.
I am using latest Jawbone Bluetooth headset, when I have an incoming call, I receive 2 rings and calls goes to voice mail.
I have called HTC Support and Telus support, they have no solution.
Is there a setting to modify the number of rings for incoming calls?
dave3211
If you're talking about the number of rings before the voicemail kicks in, yes there is a solution if your phone number is in Alberta or BC.
I dont know what Alberta or BC is...
but on my phone i do it like this...
Start->Settings->click phone->'Services(dono if it's called this, second tab)
There is a list, in that list there should be (again, dono the english word) 'forward to'
click Get Settings...
now u can set the number of secunds before it connects the call to voicemail..
with the intervals 5,10,15,20,25,30 seconds (at least with my phone provider)
hope this helps
thanks nisse thats very helpfull.
by the way forward to is call forwarding.
Excellent!!
NisseDILLIGAF said:
I dont know what Alberta or BC is...
but on my phone i do it like this...
Start->Settings->click phone->'Services(dono if it's called this, second tab)
There is a list, in that list there should be (again, dono the english word) 'forward to'
click Get Settings...
now u can set the number of secunds before it connects the call to voicemail..
with the intervals 5,10,15,20,25,30 seconds (at least with my phone provider)
hope this helps
Click to expand...
Click to collapse
Been trying to sort this out for years...nice one and thanks!!
NisseDILLIGAF said:
I dont know what Alberta or BC is...
but on my phone i do it like this...
Start->Settings->click phone->'Services(dono if it's called this, second tab)
There is a list, in that list there should be (again, dono the english word) 'forward to'
click Get Settings...
now u can set the number of secunds before it connects the call to voicemail..
with the intervals 5,10,15,20,25,30 seconds (at least with my phone provider)
hope this helps
Click to expand...
Click to collapse
Nice one indeed. thank you!!
3 rings delay in incoming call
Hi,
This might be due to another related issue:
There is delay of 3 rings before the diamond actually starts ringing.
i.e, after the caller has heard 3 rings, only then the diamond starts ringing, and by the time you pick the call, there will be many rings and it will go to answer phone as usual.
As soon as there is an incoming call, the light starts blinking. But there is a delay in the ringer/vibrate. You can try this out by calling from another phone.
This might be cause for your issue.
I too am having the same problem, and I'm searching for a solution. Maybe some cab which fixes the 3 rings dealy in incoming call... I'm sure there must be some such cab. Still going through the threads in the forum.
Could anybody please point us to a fix if you know...
Thks,
Sandeep
I've got the same problem on my touch pro..
It's even worse actually - I'm experimenting, but it seems like half the time the phone *never rings* when wifi is on and if it's asleep...
What the???
-mark
http://forum.xda-developers.com/showthread.php?p=2793104#post2793104
its a setting by your phone provider
yeah ive been testing the same problem with mine ringin from my nokia you hear it ringing out but the touch is still a sleap and bingo like you said 3 rings later it fires into action
ive also searched about - downloaded a new rom but still has the glitch
anyone sorted this out yet !! please post if you have a link to the cure
sandeepn81 said:
Hi,
This might be due to another related issue:
There is delay of 3 rings before the diamond actually starts ringing.
i.e, after the caller has heard 3 rings, only then the diamond starts ringing, and by the time you pick the call, there will be many rings and it will go to answer phone as usual.
As soon as there is an incoming call, the light starts blinking. But there is a delay in the ringer/vibrate. You can try this out by calling from another phone.
This might be cause for your issue.
I too am having the same problem, and I'm searching for a solution. Maybe some cab which fixes the 3 rings dealy in incoming call... I'm sure there must be some such cab. Still going through the threads in the forum.
Could anybody please point us to a fix if you know...
Thks,
Sandeep
Click to expand...
Click to collapse
I think that he's referring to the 3 second delay built into most phones. On earlier devices this was fixed by changing the polling time in the phone programming. (often referred to as the Slot Cycle Index). I haven't tried it on my Diamond as I haven't noticed that much of a lag.
Since I was thinking about it, I decided to try. I changed my SCI from 2 to 0.
I did look and found that I don't have that "Forward to" option in my phone settings. Probably a provider change.
Hello,
I have installed SJphone to use voip on my diamond. However everything works but how do I answer a call when it starts ringing? It seems unclear how to do that as I do not get any button to answer?
nobody!!
nobody uses SJPhone in their HTC diamond?
How to answer a call? So far I couldn't figure it out, therefore I put auto answer option on to be able to pick up the call!!!!
nobody
anybody?
How do I answer the call in sjphone please???
hi.
i encountered the same problem as you did.
the problem is because that SJPHONE you installed is for wm2003.
the bottom of the dialogue of an incoming call which showing the "answer" and "reject"
button won't display correctly on wm6.1.
just download the wm5 version SJPHONE from this link and install it, problem solved.
http://www.sjphone.org/preview/SJphone-1.60-WindowsCE(preview)/
thx
thx alot, finally i can see the accept menu thanks to you
Hi
I have a problem with my Diamond.
If i redirect a call from a phone to my diamond, when someone calls the number on that phone, the diamond doesn't notify me that the call is forwarded.
In conclusion i don't know if someone calls my diamond or my other phone.
Is there a software or something like that fixing this notification ?
Thanks
I second this!
I have same problem, any solution?
here it is:
http://forum.xda-developers.com/showthread.php?t=499338
the link is not good...
Hi all. What a great forum! I own my Htc Touch Viva (Opal T2223) since last January. I have a big problem. When people call me, it happens sometime that they hear the waiting for answer tone, but my phone does not ring. In addiction to this, the Touch Viva does not report any information about the unanswered calls. So they say: "ehi dear, why didn't you call me back?". And I: "when did you call me? I have receveid no call from you." Did anyone have the same problem? Thanks in advance.
P.S. When the problem was manifesting itself, I was using the original rom (6.1 Windows Mobile). After an Hard reset for the device, the problem was still manifesting.
king_arth said:
Hi all. What a great forum! I own my Htc Touch Viva (Opal T2223) since last January. I have a big problem. When people call me, it happens sometime that they hear the waiting for answer tone, but my phone does not ring. In addiction to this, the Touch Viva does not report any information about the unanswered calls. So they say: "ehi dear, why didn't you call me back?". And I: "when did you call me? I have receveid no call from you." Did anyone have the same problem? Thanks in advance.
P.S. When the problem was manifesting itself, I was using the original rom (6.1 Windows Mobile). After an Hard reset for the device, the problem was still manifesting.
Click to expand...
Click to collapse
Sit with its settings and try again...well,intrude in the sounds and notifications settings and play your customization games..best of luck...if you cant,try reflashing a new WM6.1 on the device...ask for links if you need any!!!best of luck!!
link for WM6.1:
http://forum.xda-developers.com/showthread.php?t=732802
incase you face any problems with the flashing process,pl refer these links CAREFULLY
links:
http://forum.xda-developers.com/showthread.php?t=446446
http://forum.xda-developers.com/showthread.php?t=685025
Again,if you face any problem,post here and the community will help...
Hello,
this is my first post. I am not sure it is right place, I hope it is.
I have the following problem with 20140622 TeamCanjica ROM. When I receive the second call (incoming call during the first one), the first call is silently muted ! I still can cancel the incoming call, but the first call is muted and the original called is not aware our connection has been broken.
After I realized this behaviour, I moved back to 20140607 and call waiting mode works properly.
I think this is a bug of 20140622 version. Should I report it somehow?
Regards,
Piotr