Hi
I have a problem with my Diamond.
If i redirect a call from a phone to my diamond, when someone calls the number on that phone, the diamond doesn't notify me that the call is forwarded.
In conclusion i don't know if someone calls my diamond or my other phone.
Is there a software or something like that fixing this notification ?
Thanks
I second this!
I have same problem, any solution?
here it is:
http://forum.xda-developers.com/showthread.php?t=499338
the link is not good...
Related
When you are calling someone that has another call (Call waiting), your PPC do not show in a notification or beep that the second party is having another line.
This is available on any very basic symbian phone.
Is there a cab to fix that?
Share a solution if you have one..
This is a feature from your carrier.... Call waiting works just fime on my Kaiser
rohanmaini said:
This is a feature from your carrier.... Call waiting works just fime on my Kaiser
Click to expand...
Click to collapse
Call waiting works fine on my Kaiser as well.
The carrier here has this option.
This is not the problem though.
The problem is when you call someone up from a PPC and that party has another line.
You should get a beep or a visual notification showing that the person you are calling has another line (my call is waiting on his phone).
So, if someone has a solution for this; please share.
Ok what I think your talking about is when you call someone that is on the phone, you hear a quick beep indicating that they are on the line, correct????
If this is what you are talking about, YES it is carrier specific. For example, when I call my father on Verizon and he is on the phone with someone else, after each ring there is a small beep. This is telling me that he is on the line.
There is nothing you can do to the Tilt to change this, it is carrier specific.
True... and there are also some PBX systems that provide the ring/beep when you are the call waiting. It usually depends on the phone system of the person you're calling.
fireblade63 said:
Call waiting works fine on my Kaiser as well.
The carrier here has this option.
This is not the problem though.
The problem is when you call someone up from a PPC and that party has another line.
You should get a beep or a visual notification showing that the person you are calling has another line (my call is waiting on his phone).
So, if someone has a solution for this; please share.
Click to expand...
Click to collapse
I think that is carrier specific too.. if I am calling some someone who is busy on another call, I get a completely diff to ringing tone.. Infact in most cases I get a audio message that the person I am calling is busy on another call and I should wait or call back later... Atleast thats what we have on all major carriers here in India...
ok we know that carrier has to support it, i know t-mobile does...
i used an old nokia to check and it works, it beeps and the whole screen says CALL WAITING, then it starts ringing...
i haven't seen any Windows Mobile touch screen or not that can do this
so its a carrier thing, yes t-mobile supports it.. windows mobile doesnt support it though!!!
so there is no way to make a .cab or something to fix this problem
It's not broken so how can you fix it? It's just not a feature that is offered.
it is not about the carrier. for instance when i had a nokia, when the other party was on the phone i had a beep in my phone, but with the WM devices, you cannot see that you call is waiting.
Hi,
I have too problems now.
1. When I receive a call, if I push the "tactil answer" button, I haven't the communication; il works like if I had rejected the incoming call (so I have regularly to call back !!! Not really economic...)
Actually, I used the hard butoon to accept the incoming call, and it works.
But do you have any solution ?
2. When I missed a call, I received a SMS what infoms me that I have a new message. OK, but the expeditor of the SMS is each time my boss !!! (the latest contact of my list). Can you explain that, and what I have to do ?
My ROM is 1.37.406.1 FRE, and I use SFR.
Nobody have a idea ?? Help me please...
I have this problem once but after flashing my device to another ROM, this problem seems to have disappeared. So, I can't really say I help you but this is what I did to make the problem go away.
Ok thank you for this answer...
I see the new ROM 1.93.XXX... is now available in French, so I think I will go on in a few days !
hello,
I have an issue related to call waiting notification when i'm calling somebody and who is already in a call - my Diamond does not notifing me about this. I activated the call waiting service and usual, on other mobiles, this was enough to be notified when i'm calling somebody who is in a call. Can somebody give me clue about how i can be notified by my Diamond?
thanks
By acrivating your call waiting on your Diamond you are notified when someone is calling you while you already are in a conversation.
I don't think is possible to notify you if the person you're calling is already in a conversation, with Diamond.
Some Nokias does this, but don't think Diamond has this feature.
Yes! It is very possible for a Diamond to inform you if the person youre calling is on the line or not. My Diamond informs me all the time!!
How exactly do I activiate call waiting on my Diamond though? I've gone through Settings -> Phone...but didn't see any options for enabling call waiting.
Does anyone else see differently?
Hi,
I have a CDMA Touch from Telus Mobility in Canada.
The issue I am having is # rings with incoming calls.
I am using latest Jawbone Bluetooth headset, when I have an incoming call, I receive 2 rings and calls goes to voice mail.
I have called HTC Support and Telus support, they have no solution.
Is there a setting to modify the number of rings for incoming calls?
dave3211
If you're talking about the number of rings before the voicemail kicks in, yes there is a solution if your phone number is in Alberta or BC.
I dont know what Alberta or BC is...
but on my phone i do it like this...
Start->Settings->click phone->'Services(dono if it's called this, second tab)
There is a list, in that list there should be (again, dono the english word) 'forward to'
click Get Settings...
now u can set the number of secunds before it connects the call to voicemail..
with the intervals 5,10,15,20,25,30 seconds (at least with my phone provider)
hope this helps
thanks nisse thats very helpfull.
by the way forward to is call forwarding.
Excellent!!
NisseDILLIGAF said:
I dont know what Alberta or BC is...
but on my phone i do it like this...
Start->Settings->click phone->'Services(dono if it's called this, second tab)
There is a list, in that list there should be (again, dono the english word) 'forward to'
click Get Settings...
now u can set the number of secunds before it connects the call to voicemail..
with the intervals 5,10,15,20,25,30 seconds (at least with my phone provider)
hope this helps
Click to expand...
Click to collapse
Been trying to sort this out for years...nice one and thanks!!
NisseDILLIGAF said:
I dont know what Alberta or BC is...
but on my phone i do it like this...
Start->Settings->click phone->'Services(dono if it's called this, second tab)
There is a list, in that list there should be (again, dono the english word) 'forward to'
click Get Settings...
now u can set the number of secunds before it connects the call to voicemail..
with the intervals 5,10,15,20,25,30 seconds (at least with my phone provider)
hope this helps
Click to expand...
Click to collapse
Nice one indeed. thank you!!
3 rings delay in incoming call
Hi,
This might be due to another related issue:
There is delay of 3 rings before the diamond actually starts ringing.
i.e, after the caller has heard 3 rings, only then the diamond starts ringing, and by the time you pick the call, there will be many rings and it will go to answer phone as usual.
As soon as there is an incoming call, the light starts blinking. But there is a delay in the ringer/vibrate. You can try this out by calling from another phone.
This might be cause for your issue.
I too am having the same problem, and I'm searching for a solution. Maybe some cab which fixes the 3 rings dealy in incoming call... I'm sure there must be some such cab. Still going through the threads in the forum.
Could anybody please point us to a fix if you know...
Thks,
Sandeep
I've got the same problem on my touch pro..
It's even worse actually - I'm experimenting, but it seems like half the time the phone *never rings* when wifi is on and if it's asleep...
What the???
-mark
http://forum.xda-developers.com/showthread.php?p=2793104#post2793104
its a setting by your phone provider
yeah ive been testing the same problem with mine ringin from my nokia you hear it ringing out but the touch is still a sleap and bingo like you said 3 rings later it fires into action
ive also searched about - downloaded a new rom but still has the glitch
anyone sorted this out yet !! please post if you have a link to the cure
sandeepn81 said:
Hi,
This might be due to another related issue:
There is delay of 3 rings before the diamond actually starts ringing.
i.e, after the caller has heard 3 rings, only then the diamond starts ringing, and by the time you pick the call, there will be many rings and it will go to answer phone as usual.
As soon as there is an incoming call, the light starts blinking. But there is a delay in the ringer/vibrate. You can try this out by calling from another phone.
This might be cause for your issue.
I too am having the same problem, and I'm searching for a solution. Maybe some cab which fixes the 3 rings dealy in incoming call... I'm sure there must be some such cab. Still going through the threads in the forum.
Could anybody please point us to a fix if you know...
Thks,
Sandeep
Click to expand...
Click to collapse
I think that he's referring to the 3 second delay built into most phones. On earlier devices this was fixed by changing the polling time in the phone programming. (often referred to as the Slot Cycle Index). I haven't tried it on my Diamond as I haven't noticed that much of a lag.
Since I was thinking about it, I decided to try. I changed my SCI from 2 to 0.
I did look and found that I don't have that "Forward to" option in my phone settings. Probably a provider change.
Hello,
I have installed SJphone to use voip on my diamond. However everything works but how do I answer a call when it starts ringing? It seems unclear how to do that as I do not get any button to answer?
nobody!!
nobody uses SJPhone in their HTC diamond?
How to answer a call? So far I couldn't figure it out, therefore I put auto answer option on to be able to pick up the call!!!!
nobody
anybody?
How do I answer the call in sjphone please???
hi.
i encountered the same problem as you did.
the problem is because that SJPHONE you installed is for wm2003.
the bottom of the dialogue of an incoming call which showing the "answer" and "reject"
button won't display correctly on wm6.1.
just download the wm5 version SJPHONE from this link and install it, problem solved.
http://www.sjphone.org/preview/SJphone-1.60-WindowsCE(preview)/
thx
thx alot, finally i can see the accept menu thanks to you