Hi everyone I have a problem with my activesync (1.93..WWE HC ) setting and all data is ok but device cuts connection at the middle of the day ( I have set 8:00pm to 8:00 am As item arrives for sync ) does anybody have the same situation or any known solution.
Regards
Related
Hello,
i have a data option at vodafone germany with 200 MB Traffic inclusive. But there is a problem: Vodafone counts the traffic in 100kb Parts and terminates the connection if there is no data transfer for some minutes (mostly about 8 minutes)
I use the exchage Email push and there is no constand data traffic. Only when an email arrives or when the exchange sends a timeout.
So Vodafone terminates the internet connection, active sync recognized it and starts the connection again. That would be no real problem, but every connection is a new 100kb part.
So i've got about 30MB Traffic after 2 days only for reconnecting. That is not really good for my inclusive traffic.
So i need a tool like an automatic ping. A program, which sends every x minutes a ping so that there is a minimal traffic and vodafone keeps the connection alive.
Is there such a tool? It could also be a tool, which looks for updates every 5 minutes The program only have to do a little traffic.
Because the connection is termindated by vodafone, no kaiser reg tweak is working.
I hope you can help me.
Thank you in advance
Special2k3
It's well known that Windows Mobile cuts off the connection after some minutes. But I've never heared that a provider cuts off the connection after some minutes without data. Are you really sure about that? A good provider wouldn't do that... ;-)
I've already had a similar problem with my old S200. It disconnected after some hours. But that wasn't a problem with the provider. It was a problem with the ROM update.
Nevertheless at that time I've also searched for a ping tool. I wrote a little Mort-Script (with logging feature) and executed it with SkSchema every hour. Since you are needing smaller intervals this could be a problem. It is a little bit hard to use SkSchema for small intervals. Here is the script:
Code:
If( InternetConnected("http://www.google.de/") )
Chk = "OK"
Else
Chk = "Off"
EndIf
FmDate = FormatTime( "Y-m-d" )
FmTime = FormatTime( "H:i:s" )
FmName = FormatTime( "ymd" )
LogText = FmDate & ", " & FmTime & ", " & Chk & ", time^NL^"
LogFile = "\My Documents\MortScript\Conn\Conn_" & FmName & ".log"
WriteFile( LogFile, LogText, 1 )
Exit
Another solution could be this tool:
http://www.wizcode.com/products/view/gprs_keep_alive
or, use vxUtil. see the Wiki for my related mass Ping tutorial
So, up again.
Is there no real solution for my problem?
No little simple program?
Special2k3
Special2k3 said:
So, up again.
Is there no real solution for my problem?
No little simple program?
Special2k3
Click to expand...
Click to collapse
http://wiki.xda-developers.com/inde...ng from the Net When I Don't Actively Use It?
Hi. Use Bandswitch to keep your connection "always-on".
Dani
Menneisyys said:
http://wiki.xda-developers.com/inde...ng from the Net When I Don't Actively Use It?
Click to expand...
Click to collapse
Thank you, nice program, but i have a problem: When the TyTn II is in standby mode (after pushing the power button once) the programs stops sending pings. When i turn on the tytn again, the ping sending continuous.
Is it possible to send also pings when the device is in standby?
Special2k3
Have you already tried the program I've mentioned in the post #2?
http://www.wizcode.com/products/view/gprs_keep_alive
Exact the program i was thinking about. But i have the same problem: The program works great if the kaiser is on. But when it is in standby mode (about 80 % of the day) the program stops to work as long as the kaiser is in standby.
Is there a way to define if a program should stop at standby or not? I mean the HTC Music Player also works in standby mode.
Thank you
Special2K3
When my phone is connected to my PC via USB, it syncs way too often. I'm looking for a setting (registry?) that can lengthen the time between syncs. Anyone else had the same problem or know if there is such a setting?
Anyone have ANY suggestions?
I used to use this back in the days of WM5 ... ( X51V ) ... no need for it now, but you can try ... it disable it completely until you want to sync
http://www.micrologics.co.uk/library/ast/
Have you heard of the "fake server" trick ??? it let you set the sync time manually or at a SET interval of your choice ...etc
http://www.aximsite.com/boards/x50-...-battery-discharge.html?highlight=fake+server
Dear Forum Members,
Maybe some of you can help me out. Here is what's happening:
The Kaiser's GSM radio is switched on and the unit behaves totally normal. From time to time I sync the Kaiser via AS 4.5/USB with my desktop computer and MS exchange (as well via the desktop computer). After all syncs have been completed successfully I disconnect the USB cable and the trouble starts.
After about 2 to 5 minutes the Kaiser starts to build up a GPRS/UMTS/HSDPA connection to the internet and tries to sync itself with exchange, even though it is not supposed to do so. All exchange settings are switched to manual sync, MS Push is switched off. Disconnecting GPRS results in a re-connection 2 to 5 minutes later. Stopping email programm, Async and connection manager on the kaiser does not fix the problem, the GPRS connection is again established.
Only work around for me at the moment: placing Kaiser next to computer speakers on my desk so that I hear that the phone is showing unwanted activity; if it does: soft reset.
Has anyone any idea what could cause this behavior? As mentioned above, it only happens after syncing the Kaiser with exchange, all exchange sync modes are set to manual.
This really did cost me some bucks while being abroad recently since I did not notice that GPRS was on all the time.
Thank you all!
GZ
Graf Zeppelin said:
Dear Forum Members,
Maybe some of you can help me out. Here is what's happening:
The Kaiser's GSM radio is switched on and the unit behaves totally normal. From time to time I sync the Kaiser via AS 4.5/USB with my desktop computer and MS exchange (as well via the desktop computer). After all syncs have been completed successfully I disconnect the USB cable and the trouble starts.
After about 2 to 5 minutes the Kaiser starts to build up a GPRS/UMTS/HSDPA connection to the internet and tries to sync itself with exchange, even though it is not supposed to do so. All exchange settings are switched to manual sync, MS Push is switched off. Disconnecting GPRS results in a re-connection 2 to 5 minutes later. Stopping email programm, Async and connection manager on the kaiser does not fix the problem, the GPRS connection is again established.
Only work around for me at the moment: placing Kaiser next to computer speakers on my desk so that I hear that the phone is showing unwanted activity; if it does: soft reset.
Has anyone any idea what could cause this behavior? As mentioned above, it only happens after syncing the Kaiser with exchange, all exchange sync modes are set to manual.
This really did cost me some bucks while being abroad recently since I did not notice that GPRS was on all the time.
Thank you all!
GZ
Click to expand...
Click to collapse
did u try some system tool to see what processes are the kaiser runing? Try to see the running processes before and after the sync, maybe the sync starts some process that is causing your problems.
Since I upgraded from Orange FR 1.37 to 1.93, ActiveSync task (on the xDA)happens to lauchs itself whithout the diamond being connected to my computer. I'm not sure, but I think that happens when TF3D today's plugin reinits itself during the night.
I want to prevent this to save my RAM usage, any idea ? Or is there a simple conf I forgot to switch off ?
(found nothing on the search, I'm surprised nobody experienced the same thing)
Sorry i can't help you, but i have a similar thing except that it doesn't seem to autolaunch, but when it is launched ( because i synchronise the diamond ) it doesn't exit after... the activesync process stay here...
For your problem, aren't you sure you don't have configured a synchonisation via wifi oor with an exchanged server ?
Ciao
Fred
hi!
i'm a newbie @ this forum, so i hope that these questions are ok to ask & my english isn't the worst..
i'm from germany and i got the touch diamond from vodafone in germany..
now i've got 3 problems..
1. if i want to sync emails with my gmx account (pop3) i got a message, that i'm not able to sync it.. "synchronisation problem" maybe it's because the proxy doesn't allow that? i got a imap email account from vodafone too, and there are no problems.. is somebody there who has the same provider or problem?
2. i got qip for the diamond and i can't get a connection to the icq network. "connection timeout" or something like that is the message i get. i tested a lot of icq clients, and i use not the newest version of qip because in this version i'm able to set the proxy, where i set the settings like my connection settings from the windows mobile device.. i've heard, that some vodafone users get this started with my version & my settings, so maybe its somebody here who get this started too.
i think 1 & 2 are the same problem, there must be a mistake in the connection settings.. maybe there is no solution, i searched @ the whole web for weeks & nothing is usefull.. it's strange that i can use the vodafone live portal & google and everything else on port 80..
now there is still the problem 3, its the most important for me..
3. if i go to the standby-mode (the small button on the top of the phone^^) and it's in standby for a while, the damn wlan connection is turning on!!! its really bad, because the battery is empty after a short while. is there a way to disable the automatic wlan connection? after that i always have to go to >settings>connection manger and have to disable wlan.. i installed the advanced settings (i think i got it from here) and enabled a lot of power management settings, and if wlan doesn't turn on, my battery works for 1,5 days (if i doesn't access the internet and play with the phone).. this is a really bad disadvantage @ the phone.. if wlan is turning on the battery is empty after a few hours..
by the way, has somebody a tip for me to get the phone turned on for longer? and whats the record running time? xD
thank you before & i have to say...
.. this forum is the best for windows mobile devices!!! i got a lot of software from here
it's really impressive