Change the browser in Manila (TF3D) !!! - Touch Diamond, MDA Compact IV General

Does anybody know how to change the browser in the TF3D of diamond ?!?!

Yes, get this tool and change default programs started by touchflo. Works great.
http://forum.xda-developers.com/showthread.php?t=407777&h

dutch64 said:
Yes, get this tool and change default programs started by touchflo. Works great.
http://forum.xda-developers.com/showthread.php?t=407777&h
Click to expand...
Click to collapse
Thanks a ton.. Loadin it now.. :-D

i had no luck with tha above tool.. no clue what to do with it and what i tryed did not help..
anyone else with an easyer method?
thanks in advance

Related

[REQ]USBToPCPopUP

Hi,
Does someone have the cab?
The three option one?
Sync, Diskdrive, Internet sharing.
Wanna use it for my Xperia.
Thx.
xmoo said:
Does someone have the cab?
Click to expand...
Click to collapse
Here is the OEM package extracted from the WWE rom. You can create a cab yourself.
kwabbernootje said:
Here is the OEM package extracted from the WWE rom. You can create a cab yourself.
Click to expand...
Click to collapse
Thx,
Could you also make a cab out of it. Only the USBtoPCPopUp part?
Thank you.
I made a cab for you hope it works.
Atze001 said:
I made a cab for you hope it works.
Click to expand...
Click to collapse
Hmz the USBTOPC did not work on Xperia.
And the USBToPCPopUp was still the old one (Sync+Internet Sharing)
Is this cab the USB TO PC or USBTOPCPOPUP? Or Both??
If both could you make just the popup one?
Thx
xmoo said:
Hmz the USBTOPC did not work on Xperia.
And the USBToPCPopUp was still the old one (Sync+Internet Sharing)
Is this cab the USB TO PC or USBTOPCPOPUP? Or Both??
If both could you make just the popup one?
Thx
Click to expand...
Click to collapse
I use the Attachment from 2nd Post and made a cab only.
If I am at home a make a new one from my kitchen.
Atze001 said:
I use the Attachment from 2nd Post and made a cab only.
If I am at home a make a new one from my kitchen.
Click to expand...
Click to collapse
Thx.
As I said just the pop-up. Not the whole app
xmoo said:
Thx.
As I said just the pop-up. Not the whole app
Click to expand...
Click to collapse
Hope it works now. Only PopUp Part from the zip above.
The one from my kitchen is german that means that I must use the one from the zip above.
Atze001 said:
Hope it works now. Only PopUp Part from the zip above.
The one from my kitchen is german that means that I must use the one from the zip above.
Click to expand...
Click to collapse
Thx, installed. Rebooting now.
Fingers Crossed
Ps. this is for my Xperia.
Nope, I get my old 2 options PopUp.
Mayb I need to copy these files to windows directory?
xmoo said:
Nope, I get my old 2 options PopUp.
Mayb I need to copy these files to windows directory?
Click to expand...
Click to collapse
These files are copyed to the windows directory in my cab.
The last thing I can do is to download a wwe rom for HTC TD and extract the files in there and try this one.
But you have to wait cause I am now at work.
Atze001 said:
These files are copyed to the windows directory in my cab.
The last thing I can do is to download a wwe rom for HTC TD and extract the files in there and try this one.
But you have to wait cause I am now at work.
Click to expand...
Click to collapse
If you could try.
You will help many more ppl.
Thx,
anyone have working cab for usbtopc for kaiser
b16b said:
anyone have working cab for usbtopc for kaiser
Click to expand...
Click to collapse
Check the Kaiser section.
There are couple of 2 options USBpop-up available for KAISER
any new abot USBtoPC for Xperia?
Thank you very much
i know this is old thread, but i think not yet solved?
please someone help us
OK; this is the second version (the first version was VGA; this one is WVGA) of this cab that I have found that has two main problems - the font is not consistent with the OOB UI for the popup (which is annoying), and all the Internet Sharing option does is launch the Internet Sharing app, which I must then still click "Connect" on... which is even more annoying. Does anyone know where to find a link to a CAB that simply restores the functionality we see in the newer ROMs?

calling rom cookers! GREAT NEWS!!!! USB TO PC POPUP mass storage WORKING!!!

to all rom cookers !!!!
to make the usb to popup work with the mass storage option, cook your rom and make the following reg BUILT-IN and use another usbtopc.exe from hd or touch pro 2. Of course don't forget the usbtopcpopup !!! making a reg and importing it will not work
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDHC]
"Flags"=dword:00000000
"DMAChannel"=dword:00000000
"DMAIrq"=dword:00000024
"DMA_IST_Priority"=dword:00000096
"SDIOIrq"=dword:0000001E
"SDIO_IST_Priority"=dword:00000097
"PollingTimeout"=dword:00000100
"CardDetect_Thread_Priority"=dword:00000098
"CardDetectGPIO"="F"
"CardDetectMask"=dword:00000020
"CardDetectFlag"=dword:00000000
"CardDetectControlMask"=dword:FFFFF3FF
"CardDetectControlFlag"=dword:00000000
"CardDetectPullupMask"=dword:FFFFFFDF
"CardDetectPullupFlag"=dword:00000020
"CardReadWriteGPIO"="H"
"CardReadWriteMask"=dword:00000100
"CardReadWriteFlag"=dword:00000100
"CardReadWriteControlMask"=dword:FFCFFFFF
"CardReadWriteControlFlag"=dword:00000000
"CardReadWritePullupMask"=dword:FFFFFFBF
"CardReadWritePullupFlag"=dword:00000040
"HandleBusyFinishOnCommand38"=dword:00000001
"DmaTransferTimeoutFactor"=dword:00000008
"DmaTransferTimeoutConstant"=dword:00003000
"IsCardInserted"=dword:00000001
"IClass"="{8DD679CE-8AB4-43c8-A14A-EA4963FAA715}"
"Prefix"="SDH"
"Dll"="sdhc.dll"
"Order"=dword:00000021
"RecoveryMoviNAND"=dword:00000000
Nice work!
KUDOS! nice findings...
how about cabbing this nice find
Thanks. It's work. I was just scathing my hair to try to get this working this morning.
THE GRIZZ said:
how about cabbing this nice find
Click to expand...
Click to collapse
heres a cab of the reg
and installing the cab and a soft reset will work if the custom rom you have has the new usb to pc from tp2 or d2 so it should work right away from the cab on itjes rom
gr8 find!
cab works perfectly thanks!
Errr., I am currently on stock rom..., anybody got the latest usbtopc cab that can be used on X1? Thanks in advance
shadowmike said:
heres a cab of the reg
and installing the cab and a soft reset will work if the custom rom you have has the new usb to pc from tp2 or d2 so it should work right away from the cab on itjes rom
Click to expand...
Click to collapse
thanks you saved us a lot of time. i just added this to my sashimi autoinstall folder.
hope the cooks include this in all their future roms.
nice work, I see that I was very close with my attemts, but missing some settings there.
Thx for this work, I will add this in future roms
cheers
keep up your good work. Your roms have helped me alot too.
Sorry to see you leave the x1 :S
Have luck with the diamond 2!!
How can i get this to work with the stock rom?
i don't understand
i have it option by deafult...
but i don't have "use pda as modem"
I only had it on custom roms not on the original one i would like to have it on the original rom
works perfectly!! THX
would die to know how this solution was achieved.... like how was the solution to this found really, these reg settings are not in neither the rhodium nor the xperia registry....so where's that from ??
I know it's old thread, but have to thank the one who found this one out !
darkhalf520 said:
would die to know how this solution was achieved.... like how was the solution to this found really, these reg settings are not in neither the rhodium nor the xperia registry....so where's that from ??
I know it's old thread, but have to thank the one who found this one out !
Click to expand...
Click to collapse
Great job on digging out a 7 months old thread. /clap
Most people would be wondering like ethermind did and myself when I saw this thread.
shadowmike said:
heres a cab of the reg
and installing the cab and a soft reset will work if the custom rom you have has the new usb to pc from tp2 or d2 so it should work right away from the cab on itjes rom
Click to expand...
Click to collapse
Thanks man! I'll hope it works on my Touch Cruise Manilla 2D rom...
- I've just tried it, not working...
Active syns mode works fine. What to do to fix disk drive mode?
Thanks in advance.
shadowmike said:
heres a cab of the reg
and installing the cab and a soft reset will work if the custom rom you have has the new usb to pc from tp2 or d2 so it should work right away from the cab on itjes rom
Click to expand...
Click to collapse
I've even tried installing this CAB file, and using Wm5torage, result is the same - computer didn't detected any disk drive...

[Req] Cab file to upgrade manila?

Hi,
I am new to this..
Where can i get a cab to upgrade my manila such that i have the calender, stock tab and more option in the tabs that i see on some theme?
thanks...
[email protected] said:
Hi,
I am new to this..
Where can i get a cab to upgrade my manila such that i have the calender, stock tab and more option in the tabs that i see on some theme?
thanks...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=493531
manoli20 said:
http://forum.xda-developers.com/showthread.php?t=493531
Click to expand...
Click to collapse
Hi,
thanks. This new version is not fully working yet rite?
any help for touchflo3d?

Please Help ... How to return to the old keyword version?

Hello to everyone and thanks in advanced for your help ...
I would like to know how can I return to the Windows Mobile Old keyboard ... the one that has handwriting posibility .... I try several roms ... and I like them but I don't like the HTC new keyword ... I really prefer the old version because I think is fast for me writing than tiping ...
Actually I'm using Itje's Touch-IT v16 with winmo 6.1
Thaks a lot ....
The Maxx
This transcriber cab might work for you.
edit: If that doesn't work, or if you'd just like the entire OEM keyboard, here you go.
thanks ... but both cabs don't work or maybe I don't know how it work.
sfreirez said:
Hello to everyone and thanks in advanced for your help ...
I would like to know how can I return to the Windows Mobile Old keyboard ... the one that has handwriting posibility .... I try several roms ... and I like them but I don't like the HTC new keyword ... I really prefer the old version because I think is fast for me writing than tiping ...
Actually I'm using Itje's Touch-IT v16 with winmo 6.1
Thaks a lot ....
The Maxx
Click to expand...
Click to collapse
Look for Calligrapher from phatware. It's the advanced version from the built in one.
jackleung said:
Look for Calligrapher from phatware. It's the advanced version from the built in one.
Click to expand...
Click to collapse
Thanks I looking for it rigth now .... anyway Is possible disable the input way that the manila's rom has? maybe by regedit and return to the windows mobile original?
I just donwloaded the .cab file, but I think is not what I'm looking for ... I'm want to disable the HTC input method and use the old that came with windows mobile the one that has block recognizer, keyboard, letter recognizer and simbol pad. Please if some one knows how can I do that it will be very helpfull for me.
BR
The Maxx
sfreirez said:
I just donwloaded the .cab file, but I think is not what I'm looking for ... I'm want to disable the HTC input method and use the old that came with windows mobile the one that has block recognizer, keyboard, letter recognizer and simbol pad. Please if some one knows how can I do that it will be very helpfull for me.
BR
The Maxx
Click to expand...
Click to collapse
Here's another stab at it. I've cabbed this up. Install it and soft reset. Let me know how this one works out.
TaurusBullba said:
Here's another stab at it. I've cabbed this up. Install it and soft reset. Let me know how this one works out.
Click to expand...
Click to collapse
Thanks ... Downloading ... I'm going to try to use it with the Ijte's LEo 9 ROM. Thanks for your help ...
The Maxx
if you run a custom rom is it possible to change the software keyborad to nordic layout?? I have the smeberg cab for the hadeware keybord. But missing the nordic keybord in the soft keybord. So please help me out.
Regards.
strix75 said:
if you run a custom rom is it possible to change the software keyborad to nordic layout?? I have the smeberg cab for the hadeware keybord. But missing the nordic keybord in the soft keybord. So please help me out.
Regards.
Click to expand...
Click to collapse
Give this one a try. Install the keyboard first, then dictionary... soft reset.
strix75 said:
if you run a custom rom is it possible to change the software keyborad to nordic layout?? I have the smeberg cab for the hadeware keybord. But missing the nordic keybord in the soft keybord. So please help me out.
Regards.
Click to expand...
Click to collapse
I never find how to change layout for Microsoft software keyboard but if your rom use EZinput software keyboard, you can change the layout with that:
Go to HKLM\Software\Tegic\et9
Change the value of DefaultLanguage
0109 -> qwerty
010C -> azerty
0107 -> qwertz
There is also 0110 and 010A avalaible but I don't know for which layout it is so you may have to try yourself
Click to expand...
Click to collapse
I do not know if nordic is supported and maybe there are other value than this ones but it is all that I know now...
Not Working
Hello again Taurusbulba... The cab don't work either .... I'm using the Ijte's TOUCH IT LEO 9 .... I did the follow: (1) Download the cab (2) copy to sd (3) install from SD (4) soft reset ... (5) Open word, excel and contacts and I have the same HTC Keyboard .... (6) try to setup the keyword from Start/Settings/Personal/Input ... and only have Touch Input....
Plese help me ...
Thanks a lot ....
The Maxx
strix75 said:
if you run a custom rom is it possible to change the software keyborad to nordic layout?? I have the smeberg cab for the hadeware keybord. But missing the nordic keybord in the soft keybord. So please help me out.
Regards.
Click to expand...
Click to collapse
I removed your last post because you double-posted the same question. I answered you in post #10. Did you not see that? Try it out and let me know if it works.
sfreirez said:
Hello again Taurusbulba... The cab don't work either .... I'm using the Ijte's TOUCH IT LEO 9 .... I did the follow: (1) Download the cab (2) copy to sd (3) install from SD (4) soft reset ... (5) Open word, excel and contacts and I have the same HTC Keyboard .... (6) try to setup the keyword from Start/Settings/Personal/Input ... and only have Touch Input....
Plese help me ...
Thanks a lot ....
The Maxx
Click to expand...
Click to collapse
Well that's not good. I'll keep my eye out for another OEM Microsoft keyboard, but I'm running out of resources. No guarantees I can find one that'll work for your device though.

Anyone have the Original Task Manager Cab?

Hello people, i require a cab for the standard htc s730 Task Manager v1.22 (814.710) Build or something very close to that. for windows mobile 6.0 qvga non-touch screen.
thanks
Why are you looking for it? CeleTask is a lot better But if you realy need i can send you some files. Any concrecte language??
I require it, because it got corrupted, if you have the original one, can you please upload the cab for it in English language please. thanks
kuljit55 said:
I require it, because it got corrupted, if you have the original one, can you please upload the cab for it in English language please. thanks
Click to expand...
Click to collapse
I haven't cab and I can't make it, but can upload you some files... I include all language files. Hope it's help you.
thanks mate, but these files didnt work when i opened them on my fone
Like i thought:/ You have some registry changes, don't let corectly run IA_Task_Manager.exe. Only way is restore default registry setings from another phone, or Hard Resed the device...

Categories

Resources