openvpn over wifi - Tilt, TyTN II, MDA Vario III Themes and Apps

It wont connect via the wifi. It doesnt make any sense at all. Does anyone have any ideas? I'm running the dutty april rom. openvpn 2.1 for pocketpc here is my .ovpn config.... What's weird is that this config works fine on my linux pc and my windows laptop both using my wifi connection so I know it's not an issue with my wifi router. Any help would be greatly appreaciated. Additionally openvpn works fine on my mobile if I am using the edge or 3g connection. It just doesnt work on the wi-fi.
client
dev tap
up-delay
ping 15
dev-node "TAP Device 1"
proto udp
remote xxx.xxx.xxx.xxx xxxx
resolv-retry infinite
tls-client
auth-user-pass
ca "\\Program Files\\OpenVPN\\config\\ca.crt"
cert "\\Program Files\\OpenVPN\\config\\me.crt"
key "\\Program Files\\OpenVPN\\config\\me.key"
ns-cert-type server
tls-auth "\\Program Files\\OpenVPN\\config\\ta.key" 1
cipher BF-CBC # Blowfish (default)
comp-lzo
verb 3
########
Logfile from openvpn
#########
Fri Aug 01 15:35:36 2008 OpenVPN 2.1_rc8 Win32-MSVC++ [SSL] [LZO2] built on Jun 28 2008
Fri Aug 01 15:35:36 2008 MANAGEMENT: TCP Socket listening on 127.0.0.1:10000
Fri Aug 01 15:35:36 2008 Need hold release from management interface, waiting...
Fri Aug 01 15:35:36 2008 MANAGEMENT: Client connected from 127.0.0.1:10000
Fri Aug 01 15:36:00 2008 Using Windows Connection Manager with destination 'auto' resolving to provider guid {436EF144-B4FB-4863-A041-8F905A62C572}
Fri Aug 01 15:36:00 2008 Acquisition of Windows Connection Manager provider succeeded...
Fri Aug 01 15:36:00 2008 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port.
Fri Aug 01 15:36:00 2008 Control Channel Authentication: using '\Program Files\OpenVPN\config\ta.key' as a OpenVPN static key file
Fri Aug 01 15:36:00 2008 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Fri Aug 01 15:36:00 2008 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Fri Aug 01 15:36:00 2008 LZO compression initialized
Fri Aug 01 15:36:00 2008 Control Channel MTU parms [ L:1574 D:166 EF:66 EB:0 ET:0 EL:0 ]
Fri Aug 01 15:36:00 2008 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ]
Fri Aug 01 15:36:00 2008 Local Options hash (VER=V4): '13a273ba'
Fri Aug 01 15:36:00 2008 Expected Remote Options hash (VER=V4): '360696c5'
Fri Aug 01 15:36:00 2008 Socket Buffers: R=[32768->32768] S=[16384->16384]
Fri Aug 01 15:36:00 2008 UDPv4 link local (bound): [undef]:1194
Fri Aug 01 15:36:00 2008 UDPv4 link remote: xxx.xxx.xxx.xxx:1194
Fri Aug 01 15:36:00 2008 MANAGEMENT: >STATE:1217622960,WAIT,,,
Fri Aug 01 15:37:01 2008 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
Fri Aug 01 15:37:01 2008 TLS Error: TLS handshake failed
Fri Aug 01 15:37:01 2008 TCP/UDP: Closing socket

sorry i cant help, thought id chime in and say first off there are numerous bugs w/ the wiifi it seems. It really screws w/ my bluetooth for one.
And ive followed every easy to use set of instructions out there, i cannot access intranet thru exchange or any other method using my wiifii. I wonder if you shut everything else on the phone off what would happen? (gprs/medianet etc)
good luck, ill keep an eye here to see if anyone figures anything out.

It looks like nobody else here has gotten it to work either

Related

Registry Entry for MediaPlayer ButtonMap Preferences

Hi, anyone could please upload there mediaPlayer ButtonMap preferences registry enry? eg fastforward and their corresponding data value (eg FastForward data is 27 00 00 00 02 00 00 00... and if anyone tried mapping thier headset button, please post for the data value eg (Next data is ?? ?? ?? ?? ?? ?? ??) thanks...

IPSEC/L2TP to IPCop VPN server?

Guys,
I'm trying to get my Kaiser to VPN into our Linux based IP Cop VPN server, using a certificate that has installed fine.
I enter all VPN details, the phone connects its 3G first, then attempts to connect the VPN - on our server side logs we can see the connection attempt, authentication happens and succeeds but then the phone reports a VPN username/password error and disconnects?
We suspect it could be to do with the CHAP/MSCHAP authentication but can't find anywhere on the phone itself to configure advanced VPN settings such as these - has anyone else succeeded with such a setup? or have an idea as to an installable WM6 VPN client that would make this easier?
ashleyhall said:
Guys,
I'm trying to get my Kaiser to VPN into our Linux based IP Cop VPN server, using a certificate that has installed fine.
I enter all VPN details, the phone connects its 3G first, then attempts to connect the VPN - on our server side logs we can see the connection attempt, authentication happens and succeeds but then the phone reports a VPN username/password error and disconnects?
We suspect it could be to do with the CHAP/MSCHAP authentication but can't find anywhere on the phone itself to configure advanced VPN settings such as these - has anyone else succeeded with such a setup? or have an idea as to an installable WM6 VPN client that would make this easier?
Click to expand...
Click to collapse
Please can anyone assist us with this, we're really struggling to find a solution and really need to get these phones up and running! I'd really appreciate someones help!
In 'Start\Settings\Connections\Advanced Network\GPRS', you can find CHAP authentication option
arnoo said:
In 'Start\Settings\Connections\Advanced Network\GPRS', you can find CHAP authentication option
Click to expand...
Click to collapse
Thanks for your reply, but I think these settings are for the GPRS settings itself, not for the specific VPN Chap/MSChap authentication?
I have my Kaiser working with both Cisco IOS routers and PIX Firewalls and the majority of the configuration was on the Cisco kit; the Kaiser was relatively simple.
I installed a Certificate, then added a VPN connection to the 'My Work Network'. I selected IPSec/L2TP, then checked the 'A certificate on this device' radio button, then entered the username & password. There isn't anything else to configure.
Is there a Root certificate installed from the CA that issued the personal certificate to the PDA & the certificate to the VPN Server? What properties does the personal certificate have? (you need to ensure 'Client Authentication' is on there).
Andy
ADB100 said:
I have my Kaiser working with both Cisco IOS routers and PIX Firewalls and the majority of the configuration was on the Cisco kit; the Kaiser was relatively simple.
I installed a Certificate, then added a VPN connection to the 'My Work Network'. I selected IPSec/L2TP, then checked the 'A certificate on this device' radio button, then entered the username & password. There isn't anything else to configure.
Is there a Root certificate installed from the CA that issued the personal certificate to the PDA & the certificate to the VPN Server? What properties does the personal certificate have? (you need to ensure 'Client Authentication' is on there).
Andy
Click to expand...
Click to collapse
Just an update on this - I've tried connecting this morning and now I'm getting something slightly different - a Network Logon prompt, asking for my USername, Password and Domain - the odd thing is that the password that I entered when installin the Certificate has been place in plain text into the Domain field???
The rom I am using doesn't have the Certificates option, I am enquiring about that now so as to reenable it and check that the certificate is installed. Will keep you updated.
Another update! Here are the log files from the IPCop VPN server itself, does this help?
Nov 28 12:14:28 ipcop0 pluto[1114]: "ob4150"[163] 212.183.134.131:7023 #4910059: Main mode peer ID is ID_DER_ASN1_DN: 'C=UK, ST=#######, O=########, OU=######CA, CN=firstname_lastname
Nov 28 12:14:28 ipcop0 pluto[1114]: "ob4150"[163] 212.183.134.131:7023 #4910059: crl update is overdue since Jan 08 14:28:18 UTC 2006
Nov 28 12:14:28 ipcop0 pluto[1114]: "ob4150"[163] 212.183.134.131:7023 #4910059: crl update is overdue since Jan 08 14:28:18 UTC 2006
Nov 28 12:14:28 ipcop0 pluto[1114]: "ashleyh"[35] 212.183.134.131:7023 #4910059: deleting connection "ob4150" instance with peer 212.183.134.131
Nov 28 12:14:28 ipcop0 pluto[1114]: "ashleyh"[35] 212.183.134.131:7023 #4910059: transition from state STATE_MAIN_R2 to state STATE_MAIN_R3
Nov 28 12:14:28 ipcop0 pluto[1114]: | NAT-T: new mapping 212.183.134.131:7023/8514)
Nov 28 12:14:28 ipcop0 pluto[1114]: "ashleyh"[35] 212.183.134.131:8514 #4910059: sent MR3, ISAKMP SA established
Nov 28 12:14:28 ipcop0 pluto[1114]: "ashleyh"[35] 212.183.134.131:8514 #4910059: retransmitting in response to duplicate packet; already STATE_MAIN_R3
Nov 28 12:14:28 ipcop0 pluto[1114]: "ashleyh"[35] 212.183.134.131:8514 #4910063: responding to Quick Mode
Nov 28 12:14:28 ipcop0 pluto[1114]: "ashleyh"[35] 212.183.134.131:8514 #4910063: transition from state (null) to state STATE_QUICK_R1
Nov 28 12:14:29 ipcop0 pluto[1114]: "ashleyh"[35] 212.183.134.131:8514 #4910063: transition from state STATE_QUICK_R1 to state STATE_QUICK_R2
Nov 28 12:14:29 ipcop0 pluto[1114]: "ashleyh"[35] 212.183.134.131:8514 #4910063: IPsec SA established
Nov 28 12:14:33 ipcop0 pluto[1114]: "ashleyh"[35] 212.183.134.131:8514 #4910059: received Delete SA payload: deleting ISAKMP State #4910059
Nov 28 12:14:33 ipcop0 pluto[1114]: packet from 212.183.134.131:8514: received and ignored informational message
Nov 28 12:14:33 ipcop0 pluto[1114]: packet from 212.183.134.131:8514: Informational Exchange is for an unknown (expired?) SA

QuickGPS can't connect - SOLVED!!!

Wow, I can't tell you all how much I've 'suffered' from this issue. All the registry hacks I've found and tried worked for me one time, including the CAB installs, and all the rest of my attempts, not at all.
I tried downloading the GPS data manually, and still no go. Basically I've not been able to get QuickGPS to synch/update for about 6 weeks.
Here's what FINALLY worked for me. The really weird issue that pushed me over the edge was noticing that PIE wouldn't connect 'suddenly', which I think means that it was never connecting while QuickGPS couldn't get its data either. I use Opera Mobile generally, so I hadn't noticed the PIE issue. I also have no issues with the slew of other network based apps (exchange synch, RSS Hub, Skype, Weather updates, etc).
So... I started looking around and found this fix for PIE. It is a CAB that removes any proxy info in the network connections. I didn't think I needed it since I had no proxies set, and also resaved my network connections. Well, I ran this CAB, http://www.gadgetech.info/treo/hacks/disableproxy/DisableCingularProxy.cab from this thread: http://forum.xda-developers.com/showthread.php?t=300887&page=5, (THANKS PRODIGALFISH!).
You will also likely want to reinstall this in case you think your registry is junked by now:
HTC QuickGPS 1_00_220821_00 from http://forum.xda-developers.com/showthread.php?t=365595 (THANKS srsaleenstang!)
Rebooted my phone, and BAM. QuickGPS is rocking FINALLY after a MONTH of no connects.
I suspect something really bad happens to my internet connect settings as I roam quite a bit, either out of the country, or to edge only networks out of 3G areas. I don't know how it happens, but wow, I'm glad to have my GPS lock quickly.
It appears that PIE gets confused from some type of less than obvious proxy information which is the same that QuickGPS uses. I have no imperical evidence for this, only my long term struggle being resolved so soundly from this patch.
Later I think I'll extract the CAB from above to see what it's doing vs. what my internet connections reported as being.
Anyway, I'm interested in digging into this further since I really like my Winmo Kaiser on AT&T service with the GPS. I like it even more when GPS locks quickly.
Please let me know if this works for you if you have the same problem.
Here's the simple instructions again:
1. Run this CAB to fix your internet connection settings: http://www.gadgetech.info/treo/hacks/disableproxy/DisableCingularProxy.cab
2. Run this CAB to get a healthy QuickGPS installed: http://www.4shared.com/file/70370766/d5fd31e4/HTC_QuickGPS_1_00_220821_00.html
I'm on AT&T network, Kaiser with custom ROM.
thanks! I'm hoping I can follow this fix to get quickGPS working on my verizon touch pro. The 4shared.com link is invalid now though. Would you mind re-uploading?
This almost worked
I had the same problem. PIE (Explorer) stopped working about a month ago and always gave a 504 error gateway timeout. My QuickGPS also stopped being able to connect. Even under WiFi. I installed Opera which solved the browsing problem, but could no longer get QuickGPS updates. It did look like there was a additional proxy (in spite of me not specifying one).
The above instructions almost worked but DisableCingularProxy.cab didn't do it. But removeHiddenProxy4CWS_0522.cab did do it (if you unpack these you'll see the first changes only one thing in the Registry (EnableAutoDetect) while the second also changes ConnMgrExternalPath to what appears to be a random binary string.
With removeHiddenProxy4CWS_0522.cab QuickGPS and PIE work again (though I'll continue to use Opera for actual browsing).
I successfully downloaded the cab from here removeHiddenProxy4CWS_0522.cab
Deleting deleted proxy settings
Hi
Sorry for the "brick".
Four days ago I had the same problem, QuickGPS didn't connect. I work in networking, so everithing I see I allways think about it as a network problem.
I configured my server as default router of my Polaris, and started a trace with wireshark. Then I found that when I tried to update, my PDA tried to connect to one of my office's proxy.
Settings -> Connections -> Connections, and deleted the proxy. Reset. But my PDA still tried to connect to my office's proxy.
My server is also a DNS server, so I defined a DNS record with the name of my office's proxy and my server's address. I started a proxy server (privoxy) in the same port of my office's proxy. Thus, I replicated my office's proxy at home. When I tested, I found that QuickGPS made the update very fast... through the proxy I had deleted.
I searched several times for the text in regedit but didn't find any key with the name of my office's proxy server.
I tried reinstalling the QuickGPS software. Fail.
Then I saw this post, watched the keys and found that the key
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Connections\DefaultConnectionSettings
still had the name of my office's proxy in hex.
I tried to find the syntax of the key, nothing. I only found this post.
I made a copy of the value of the key in my PDA and changed my key to
3c 00 00 00 15
00 00 00 01 00
00 00 00 00 00
00 00 00 00 00
00 00 00 00 00
00 00 00 00 00
00 00 00 00 00
00 00 00 00 00
00 00 00 00 00
00 00 00 00 00
00 00 00 00 00
00 00 00 00 00
00 00 00 00 00
00 00 00 00 00
00 00 00 00 00
00
Reset. Tried QuickGPS ... and now it's working without proxy.
Success. I invited myself to a beer.
Hope it helps
Regards - Pableras
Mapking
i cannot run mapking 2007 after accidental delete of gps folder in my mmc
can you help me on that,!

How to config internet Diam CDMA-?

Hi evey1-!
I have CDMA Diamond running on XANDROID-!
But i can't config my internet settings-!
On WM platform, i had:
User Name: [email protected]
Password: a
Dial number: #777
Where i should config this settings-?

Yahoo Email Incorrect Username/Password

I have confirmed these settings work on any type Android Device (Captivate, Aria, Back flip as well as any unlocked Android Device).
These settings work for ALL types of yahoo email accounts: i.e. @yahoo.com, @ymail.com, @[email protected], @att.net, basically any type of email that is “Powered by Yahoo.com”
Yahoo Email
Incoming Server Settings
Server Type: IMAP
Username: Full Email Address ([email protected] / [email protected] / [email protected] / [email protected] )
Password: Password customer uses to log in this email account online
Incoming Server: imap.mail.yahoo.com
Port: 143
Security Type: None
IMAP path prefix: Leave Blank
Outgoing Server Settings
SMTP Server: smtp.mail.yahoo.com
Port: 25
Security Type: None
Check mark “Require sign-in.”
Username: Same as before (Full Email Address)
Password: Same as before
Please Note: If the SMTP Outgoing Server doesn’t work try “smtp.mobile.mail.yahoo.com”

Categories

Resources