Goodmorning to all of you...
I'm having a question..I have a compact IV now for a couple of weeks which is now fully customized with an original stock ROM from HTC but since a few days i'm not able to zoom with Opera..
what I mean is that when I search for a mobile website, it will open, but I can't zoom in or out with tapping on the screen...I already looked into the settings and that should be ok..the mobile view option is enabled...
I'm also using Advanced Config..had that something to do with this??
I hope somebody could help me with this, maybe i'm not the only one with this problem!
Thanxx everybody in advance
Jeroen
is there somebody who can help me with this???
not just you
i can't use it too !
Have you tried a soft reset?
Mostly when I have a problem this is solved by a soft reset.
Also turning off and on wil help often to problems that occur after some time.
Grtzzz
Can you zoom by using the "wheel"? I mean by using a circular motion with your finger around the center button?
TomInMB said:
Can you zoom by using the "wheel"? I mean by using a circular motion with your finger around the center button?
Click to expand...
Click to collapse
No, i'm not even able to use the wheel.. and a soft reset also doesn't work either.. also some text on the right hand side of the screen isn't aligned..maybe I can make a screenshot of it...
Which rom do you use? This might be the problem.
Remember when it worked for the last time?
If yes think about what you did after.
Maybe you installed a program which causes this.
Try to uninstall the program or programs if you did.
When you installed more then one delete one after each other and remember which program did make the problem to your browser and post it here.
Grtzzz
here's a screenshot:
baraata said:
Which rom do you use? This might be the problem.
Remember when it worked for the last time?
If yes think about what you did after.
Maybe you installed a program which causes this.
Try to uninstall the program or programs if you did.
When you installed more then one delete one after each other and remember which program did make the problem to your browser and post it here.
Grtzzz
Click to expand...
Click to collapse
at this moment i'm using the original HTC stock rom v1.37 Europe edition, i've installed Advanced Config and that's all....i might try another hard reset but I would prefer another method to get rid of this annoying problem...
1.37
Why not go to 1.93 its much faster and smoother.
This might also solve your problem.
Grtzzz
Pirtje...as for the text overflowing on right side...Opera sometimes does not reposition text that are in tables of more than one cell (and possibly other times as well). If those items are in a table, that is most likely the cause.
TomInMB said:
Pirtje...as for the text overflowing on right side...Opera sometimes does not reposition text that are in tables of more than one cell (and possibly other times as well). If those items are in a table, that is most likely the cause.
Click to expand...
Click to collapse
allright I didn't knew that.. thanxx for your reaction!
baraata said:
1.37
Why not go to 1.93 its much faster and smoother.
This might also solve your problem.
Grtzzz
Click to expand...
Click to collapse
I might do that later...because I don't have an version which I can use, because I have a mda Compact IV which is Hard spl-ed 1.40 but can't upgrade to 1.93..
at least...don't know how to manage that...
Check that you have not got a tick in the 'mobile view' in settings. You can't zoom when that is checked.
nokmond said:
Check that you have not got a tick in the 'mobile view' in settings. You can't zoom when that is checked.
Click to expand...
Click to collapse
Man UR amazing!!! that did it!! now it's working again for me!! thank you soo much!!
SOLVED!!
Can a mod change this thread as solved???
can I also do that myself??
Greetzzz Jeroen
Pietje_1985 said:
Man UR amazing!!! that did it!! now it's working again for me!! thank you soo much!!
Click to expand...
Click to collapse
Your welcome.
Pietje_1985 said:
Man UR amazing!!! that did it!! now it's working again for me!! thank you soo much!!
Click to expand...
Click to collapse
I have the same problem and I'm sure, first it was possible to zoom in mobile view for me. When I zoomed in this mode the site zoomed in and text was broken to the new format after a few seconds. Now it is in fact only possible without mobile view, but this is not very usefull for me, because text is will not be reformated in this mode. Don't know what happend.
first uncheck the mobile view box......and then anywhere on the website double tap the screen and this will zoom in automatically and then start using the wheel to zoom in or out etc....this will auto format the text to fit the screen......the catch is to "double tap" on the screen first before using the scroll wheel otherwise the scroll wheel will not auto format the text to fit the screen......
irv777 said:
first uncheck the mobile view box......and then anywhere on the website double tap the screen and this will zoom in automatically and then start using the wheel to zoom in or out etc....this will auto format the text to fit the screen......the catch is to "double tap" on the screen first before using the scroll wheel otherwise the scroll wheel will not auto format the text to fit the screen......
Click to expand...
Click to collapse
Perfect - this works!
Related
Hey guys, I'm wondering if anyone has experienced the following before (I can't find any mention of it in various Kaiser FAQs etc)?
When I click on an SMS (and possibly MMS and E-Mail) the device automatically scrolls way past the bottom of the content and I have to manually scroll up to actually read it. I could understand it doing this if I was replying to the message, but I'm just clicking to view it.
I've experienced it on a couple of ROMs now - Dutty's dualtouch and Kaiser release so it seems to be something deep-rooted in the OS / messaging software.
Attached is 3gp video which demonstrates the problem. The quality is real bad but it's enough to see what's going on.
Any help would be highly appreciated as this is starting to become a bit of an annoyance!
An option in KaiserTweak causes this, you need to disable "D-Pad scroll Navigation" under "PocketIE". This should do the trick...
Deframe said:
Any help would be highly appreciated as this is starting to become a bit of an annoyance!
Click to expand...
Click to collapse
A quick search is the best help that I can give you at this point.
Audio said:
An option in KaiserTweak causes this, you need to disable "D-Pad scroll Navigation" under "PocketIE". This should do the trick...
Click to expand...
Click to collapse
Thanks for the quick response but disabling that doesn't seem to make a difference
Same Here
I'm having the same problem (versions below). Any ideas?
hmmm... it should work... Are you sure you disabled it? Just to show you I didn't just make up a solution , here is a link to another thread which states that disabling d-pad navigation should solve the issue...
http://forum.xda-developers.com/showthread.php?p=1778601&highlight=text+bottom+screen#post1778601
Deframe said:
Thanks for the quick response but disabling that doesn't seem to make a difference
Click to expand...
Click to collapse
just wait a few seconds and than soft-reset!
this solved my problem!
steph
Success
Tried it a second time and this time it worked. Thanks Guys.
Problem occured also in my loved Tytn II.
It is a good news, Thanks U
yep - worked for me too.. thx Audio
thanks, disabling the PIE Dpad navigation tweak fixes the problem...
Soft reset did the trick, thanks all!
Same here! initially i too had problems that after changing it in KaiserTweaks, it still behaved the same, but the wait and then softreset did the trick!
Thanks a lot!
A few questions and do not laugh.
Is the kaiser and the tilt the same thing?
Can I put the touchflo software in my tilt? If YES, there are about 459 threads about the touchflo. Which is the one I should go to with the software and installing info?
I have issues with the response speed of the touch screen. Can it be resolved? Sometime I have to tap multiple times to have a response
About the kaisertweak. Is that ok for the tilt ? Should I install it?
Thanks for all your help and remember... patience is a virtue.
rmarin said:
A few questions and do not laugh.
Is the kaiser and the tilt the same thing?
Can I put the touchflo software in my tilt? If YES, there are about 459 threads about the touchflo. Which is the one I should go to with the software and installing info?
I have issues with the response speed of the touch screen. Can it be resolved? Sometime I have to tap multiple times to have a response
About the kaisertweak. Is that ok for the tilt ? Should I install it?
Thanks for all your help and remember... patience is a virtue.
Click to expand...
Click to collapse
yes, yes, yes, yes, yes, yes - just pick one - yes, yes, yes, yes
when all else fails, feel free to read.
rmarin said:
A few questions and do not laugh.
Is the kaiser and the tilt the same thing?
Can I put the touchflo software in my tilt? If YES, there are about 459 threads about the touchflo. Which is the one I should go to with the software and installing info?
I have issues with the response speed of the touch screen. Can it be resolved? Sometime I have to tap multiple times to have a response
About the kaisertweak. Is that ok for the tilt ? Should I install it?
Thanks for all your help and remember... patience is a virtue.
Click to expand...
Click to collapse
The Tilt comes with Touch-flo installed from AT&T. I didn't have to do anything to my Tilt and all that had to happen was one person showed me touch-flo on their Tilt. I tried it and it worked immediately. I didn't change any settings or install anything extra. Give it a try. Open your contacts list and quickly slide your finger from the bottom to the top of the screen with a light touch. Once you get the hang of it you can have it spinning like the big wheel on the price is right... except here you just tap the screen to stop it where you want it.
-Jay
Jay2TheRescue said:
The Tilt comes with Touch-flo installed from AT&T. I didn't have to do anything to my Tilt and all that had to happen was one person showed me touch-flo on their Tilt. I tried it and it worked immediately. I didn't change any settings or install anything extra. Give it a try. Open your contacts list and quickly slide your finger from the bottom to the top of the screen with a light touch. Once you get the hang of it you can have it spinning like the big wheel on the price is right... except here you just tap the screen to stop it where you want it.
-Jay
Click to expand...
Click to collapse
Jay is correct
In my opinion, after installing Kaiser Tweaks, scrolling worked MUCH better. There are 2 settings in Kaiser Tweaks which affect scrolling, sensitivity and finger pressure.
cincy1020 said:
Jay is correct
In my opinion, after installing Kaiser Tweaks, scrolling worked MUCH better. There are 2 settings in Kaiser Tweaks which affect scrolling, sensitivity and finger pressure.
Click to expand...
Click to collapse
Yes, there are setings to "tweak" it, but I found that the default was the lightest touch. I tried the "advised" settings in Kaiser Tweak and I couldn't get that thing to spin to save my life. Every time I tried I had to push the screen so hard that often times one of my contacts opened instead. I ended up putting it back on the default settings.
-Jay
Jay2TheRescue said:
Yes, there are setings to "tweak" it, but I found that the default was the lightest touch. I tried the "advised" settings in Kaiser Tweak and I couldn't get that thing to spin to save my life. Every time I tried I had to push the screen so hard that often times one of my contacts opened instead. I ended up putting it back on the default settings.
-Jay
Click to expand...
Click to collapse
It's funny, I have the exact opposite experience. Right now I have 2 Tilt's in front of me. I had to order a replacement, and still have both.
The new one (untweaked) is almost impossible to scroll. The tweaked one is very easy to scroll.
I have Kaiser Tweaks set to normal on sensitivity, and very high on finger pressure.
But, you know what they say, to each his own
Is it possible when I open storage card
it opens directly to Bottom of the List
Does anyone know How to ?
ilordvader said:
Is it possible when I open storage card
it opens directly to Bottom of the List
Does anyone know How to ?
Click to expand...
Click to collapse
hmmm, I don't know. One thing I did notice though... I'm suprised that you haven't upgraded the DeathStar to 3G service yet.
-Jay
Im New Also
I Reall Want The Touch Flo On My Tilt But Dont Know How To Put It On The Can Some Post It Ir Send It To Me
mrhawkins318 said:
I Reall Want The Touch Flo On My Tilt But Dont Know How To Put It On The Can Some Post It Ir Send It To Me
Click to expand...
Click to collapse
See post # 3 of this thread...
-Jay
IF you read the thread you'll c it is allready there...
About TouchFlo and Kasiertweak... I also couldn't scroll with the Kaiser tweak settings, so changed it back to default....
it came on your phone
so how is that going to help me
mrhawkins318 said:
so how is that going to help me
Click to expand...
Click to collapse
wow......u want me to come by ur house, and teach you step by step on on what you should do?
mrhawkins318 said:
so how is that going to help me
Click to expand...
Click to collapse
This is helping you because you don't need to do anything but learn to use it, which by the way I put instructions in post #3 of this thread...
-Jay
Jay2TheRescue said:
hmmm, I don't know. One thing I did notice though... I'm suprised that you haven't upgraded the DeathStar to 3G service yet.
-Jay
Click to expand...
Click to collapse
DeathStar to 3G service yet lol good one
Cos the city im in doesnt have 3g
Ok now Please tell me How to start a Post here in these Fourms Plz
Anyone ?
Welcome. I'm new too. And like others said, reading is very important. I cannot emphasize that enough. You can find anything you need on here. Good luck.
ilordvader said:
Is it possible when I open storage card
it opens directly to Bottom of the List
Does anyone know How to ?
Click to expand...
Click to collapse
You can click quote inside a post and reply to that post in particular. You can click Post Reply button at the top of the thread to reply to the thread without quoting anyone. In the forums list (ie, the Kaiser forum) you can click the "New Thread" button to create a new topic of discussion.
-Jay
Jay2TheRescue said:
You can click quote inside a post and reply to that post in particular. You can click Post Reply button at the top of the thread to reply to the thread without quoting anyone. In the forums list (ie, the Kaiser forum) you can click the "New Thread" button to create a new topic of discussion.
-Jay
Click to expand...
Click to collapse
Thank you Finally Got it
Tweak problems on my TILT
HSDPA on my TILT is displayed at all times. I installed the lates Kaiser Teak a few months ago. My TILT use to display 3g when no data is in use but now H shows as my primary display regardless of data being used or not.
Is there and updated Kaiser Tweak out. If there is can some post the new link. Thanks
Paparichy
Anyone else got this... Every time i open a message it seems to default to the bottom of the message... i.e. a blank screen. So I have to scroll up to the top of every message i get!
How do i fix this!? its really annoying!
I have the same problem... I think it is rom specific though... I am using WM6.1...Sleuth V3
It's a registry hack issue. Install Kaiser Tweaks and disable the D-Pad scrolling.
If you are using Kaisertweak, make sure you have the D-Pad Scroll Navigation set to default.
fantastic - thanks
when i installed KaiserTweak i basically just put everything onto it's advised setting
Which option is it? I cant find it in KaiserTweak.
CorruptedSanity said:
Which option is it? I cant find it in KaiserTweak.
Click to expand...
Click to collapse
In KaiserTweak Collapse all the trees one by one until you get all the way down to PocketIE. In there set D-Pad Scroll Navigation back to Disabled.
AFAIK, this is not a registry problem. in fact all you have to do is to choose the way your messages are arranged
at the right upper corner of the messages application (right below the clock) there is a tab that arranges your message by: Message Type, From, Received, Subject
normally it's ticked to received, but if you hit Received again you will see your messages arranged from the older one you got and the newest is at the bottom... all you have to do is to hit Received again.. And you're done
Cheers
duke911 said:
AFAIK, this is not a registry problem. in fact all you have to do is to choose the way your messages are arranged
at the right upper corner of the messages application (right below the clock) there is a tab that arranges your message by: Message Type, From, Received, Subject
normally it's ticked to received, but if you hit Received again you will see your messages arranged from the older one you got and the newest is at the bottom... all you have to do is to hit Received again.. And you're done
Cheers
Click to expand...
Click to collapse
Perhaps you should read the actual issue again, cos you're talking about something else
oh, my bad...
knwoing this is the isuue, it happens with me also sometimes
Thanks
Hi Guys, Thanks alot. that was really starting to bug me, and I had the feeling that the only way to return it to "normal" would be to hard reset, so just deseleting the D Pad in the Tweak and soft resetting has saved me alot of trouble.
Thanks Again,
Tom
KaiserTom said:
Hi Guys, Thanks alot. that was really starting to bug me, and I had the feeling that the only way to return it to "normal" would be to hard reset, so just deseleting the D Pad in the Tweak and soft resetting has saved me alot of trouble.
Thanks Again,
Tom
Click to expand...
Click to collapse
Hey guys,
I'm experiencing the same thing with a Helmi AKU 3.5 ROM that I've put on my Universal. I know that KaiserTweak is for the....Kaiser, but I was wondering if anyone knew exactly which registry hack to change to "disable DPad scrolling". I read in one of these posts that it was under the PocketIE settings, and I do know that my PocketIE has been hacked to support "high resolution mode", so maybe this is what is causing my issue (although I've found nothing about the setting in IE itself).
If anyone can enlighten me (probably with a Registry setting), even if you've already 'fixed' your Kaiser, I would appreciate it immensely, as this small issue is slowly driving me nuts!
Thanks in advance all,
-scar
Hallo
I'm tired of all the the time hitting "send" by mistake when I'm typing a sms.
Does there exist a tweak so you need to hold the send bottom in for a while for it to send? So you can't press it quick..
The right notice
I have suffered from this when using extra thingie to enter (exotic) estonian letters like äüöõšž and if the device slows down a bit there (it happened just few times) then I notice that I unfortunately have pressed Send because the softbutton just had another function
darfri said:
I have suffered from this when using extra thingie to enter (exotic) estonian letters like äüöõšž and if the device slows down a bit there (it happened just few times) then I notice that I unfortunately have pressed Send because the softbutton just had another function
Click to expand...
Click to collapse
So ? What is your solution ?
mysterd said:
So ? What is your solution ?
Click to expand...
Click to collapse
Turn off TF3D! ;O)
Better solution:
FingerKeyboard 2.1 (search in Forum)
1. You get a better keyboard.
2. If you want, the keyboard covers the windows bar including the button "Send". You have to tap the keyboard away to push "Send". Works like a charm.
Jim Coleman said:
Turn off TF3D! ;O)
Click to expand...
Click to collapse
I just can't see the point in this...
The problem is with the softkey bar... Why do you suggest turning off TF3D ?
Tatsch said:
Better solution:
FingerKeyboard 2.1 (search in Forum)
1. You get a better keyboard.
2. If you want, the keyboard covers the windows bar including the button "Send". You have to tap the keyboard away to push "Send". Works like a charm.
Click to expand...
Click to collapse
Interesting
Thanks for your help !
mysterd said:
So ? What is your solution ?
Click to expand...
Click to collapse
What is yours?
Don't use the 3DFO message. Simple as that.
I never use that, just the built in outlook to send text messages.
In fact I disabled the 3Dflo plugin in today and I'm using right now the standard today with all the plugins that I want.
rogeriopcf said:
Don't use the 3DFO message. Simple as that.
I never use that, just the built in outlook to send text messages.
Click to expand...
Click to collapse
And there, you don't have a windows bar with a "Send"-Button? Strange ...
I see a lot of people like auto-rotation but it kills it for me.
I tried changing the registry (HKCU/GSENSOR) but it didn't help for Opera 10.
BUMP
Using Opera Mobile 10 Beta2u.
rebump. anyone found an answer yet//??
Stopping rotation!!
Hey I see you don't want Oprea to rotate.. Yeah sometimes bothers me when it rotates, but now it really dosen't bother me now. But I add this Cab. file where you can have any PROGRAM you choose to Rotate or Stop the ones you don't want rotating.. Hope this helps you out with your problem aite.. Good Luck to ya.....
Bman
Bajanman said:
Hey I see you don't want Oprea to rotate.. Yeah sometimes bothers me when it rotates, but now it really dosen't bother me now. But I add this Cab. file where you can have any PROGRAM you choose to Rotate or Stop the ones you don't want rotating.. Hope this helps you out with your problem aite.. Good Luck to ya.....
Bman
Click to expand...
Click to collapse
Tried it out, didn't help.
Maybe I'm using it wrong. I added opera 10 to the list and unchecked it. Still autorotates.
Does BsB read the gsensor reg setting, by any chance?
Exit Opera.
Go to [HKEY_LOCAL_MACHINE\Software\Opera\GSensor]
Remove or Rename value "IdleTime"
Soft reset
dreamyboy91 said:
Exit Opera.
Go to [HKEY_LOCAL_MACHINE\Software\Opera\GSensor]
Remove or Rename value "IdleTime"
Soft reset
Click to expand...
Click to collapse
..............bloody hell..seems it's working...THANK YOU!
But I'm 100% sure I tried that before, I was using the same hack on 9.7 ??
Anyway thanks
kosmarnik said:
..............bloody hell..seems it's working...THANK YOU!
But I'm 100% sure I tried that before, I was using the same hack on 9.7 ??
Anyway thanks
Click to expand...
Click to collapse
looks like you were altering the wrong registry. Instead of HKLM you were in HKCU