Whos using gsen to sleep the Jewel and that automatically enable S2U2??
Gsen even works if you turn on the display to check time for example all on S2U2. (although some tweaking is required)
So its a great combo.
Very happy with diamond.
How do you do that please?
yes, details please !
Alright Fellasss:
Install Gsens!
Install S2U2.
In Gsnes CFG:
go down to #fdscreenoff(2)<----set it like that! File-->save.
exit.
S2U2 latest!! setup:
lock when backlight off --- ON
Everything OFFF all the way to the bottummm!!! OFF.
Reset JEWEL!!!
Remove S2U2 from Startup folder.
Run GSEN first.
Run S2U2.
ENJOY
Turn the diamond on its side and it turns offdisplay and activate S2U2 when yo press your onlock key S2u2 shows with slide unlcok..
If you only want to turn on the Diamond for a quick hour chek press any key and chek on S2u2 flip diamond and back to blank!
luck
What if I'm simply going to put it into my pocket instead of laying it down on the table? Then I won't flip the phone, so it'll never trigger S2U2.
Which version of S2U2 do you mean by latest? I have been using #fdscreenoff(2) with v1.05 and there were no problems at all, but from v1.10 it stopped working. GSen can't switch off the phone anymore. (it can, when you unlock S2U2 prior to flipping phone, but when phone is locked, Gsen #fdscreenoff(2) somehow crashes) With v1.05 you don't have to do any tricks, just set up S2U2 as normal, enable GSen #fdscreenoff(2) and everything works as it should.
Brevi said:
Which version of S2U2 do you mean by latest? I have been using #fdscreenoff(2) with v1.05 and there were no problems at all, but from v1.10 it stopped working. GSen can't switch off the phone anymore. (it can, when you unlock S2U2 prior to flipping phone, but when phone is locked, Gsen #fdscreenoff(2) somehow crashes) With v1.05 you don't have to do any tricks, just set up S2U2 as normal, enable GSen #fdscreenoff(2) and everything works as it should.
Click to expand...
Click to collapse
I have the exactly the same problem running S2U2 v1.13!
If I start by flipping the phone over it shuts off and pressing a button the phone is locked allright and I can slide to unlock it. I can repaet this and it still works.
But if I try to flip the phone over with the phone allready locked nothing happens, and when unlock the phone the "flip to off" dos not work at all!
Anyone any ideas?
aydc said:
What if I'm simply going to put it into my pocket instead of laying it down on the table? Then I won't flip the phone, so it'll never trigger S2U2.
Click to expand...
Click to collapse
YOu can quickly mimic laying down the phone on the table just in the air. You dont need to phisically lay it down.
Well, thats how g-forces work. But can you tell me what version you are using?
Brevi said:
Well, thats how g-forces work. But can you tell me what version you are using?
Click to expand...
Click to collapse
Version 1.13.
Working perfect. I did encounter some problems at the beginning, but, disable S2U2 on startup. And start gsen manually then start S2U2 with the settings I described before. A soft reset helps after changing #fdscreenoff(2)
I believe starting gsen first helps toooo
Related
I can't use voice dialer when S2U2 locks phone, is there a way around this? I like the S2U2 application, but when I am driving and need to make a phone call via bluetooth handfree I can't, because s2u2 block the voice dialer.
I did look for a solutions via the search engine and in the s2u2 thread, but no luck thus far.
which device?
which ROM?
which voice dial app?
smittyofdhs said:
which device?
which ROM?
which voice dial app?
Click to expand...
Click to collapse
Thanks for your response,
HTC 8925 (Tilt)
Dutty's Touch AT&t beta 2
Cyberon Voice Speed Dial V1.2 build 070626
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
did you turn on the directdraw option or safe mode option?
When you uninstall an app, it leaves behind the registry entries. As soon as you reinstall the app, those settings are in affecct again. Uninstall the app, use a registry editor to remove the following key, soft reset, then try to reinstall:
The key to remove is HKCU\Software\A_C
Ok, I had the exact same problem, the problem is indeed with D3D option, you need to disable it. As soon as it is off and the settings are saved, the program works fine once again, and smoother then previous version.
This part is gonna be hard to explain... but here it goes...
First thing to do is run ilock so that when u turn the screen off it doesn't start S2U2.
When you open the settings the screen freezes, like the kaiser crashed, but if you move down and you turn the screen off and on, you'll see the menu scrolled down.
Basically that means u're working blind, changes do occur but u can't see, so the process is to move it down, turning the screen off and on sistematically until u see the d3d option and turn it off, then save it.
Hope I explained myself enough.
Takes some work, but doesn't require registry tweaking and other settings are kept.
Keep posted on results.
Cheers, Esko
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
Thank you both for your fast and details replies!!!
It was indeed the direstdraw option. It was easier for me to try eskostar's method, especially since i had tried the same blind procedure but i did not figure the trick with running the ilock first!!!
Everything worked out great!!! Now i can use this excellent program again!!!
Thank you again!!!
Cheers, Nikos
I have this problem. When I start S2U2 and miss call screen remains as it is when someone call (caller's number and slide to answer or two buttons with green and red phone). Whatever I push or click nothing happens. So I must softreset or turn off and on my Kaiser. Some tips?
Sorry I dont have that issue. However my problem with this version of S2U2 is when SLide to Answer is Active you can still use the Hardware Keys to answer!
Anyone no how to deactivate the Hardware keys during Slide to Answer?
MM
bersca said:
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Click to expand...
Click to collapse
Thank you for your response, I will try this when I get back from vacation.
Sempai32 said:
Thank you for your response, I will try this when I get back from vacation.
Click to expand...
Click to collapse
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
LDJ said:
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
Click to expand...
Click to collapse
yeah it works, get a reg editor and do as stated, it works.
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
CocheseUGA said:
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
Click to expand...
Click to collapse
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
smittyofdhs said:
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
Click to expand...
Click to collapse
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
CocheseUGA said:
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
Click to expand...
Click to collapse
Good deal, glad it worked for you....
when I install S2U2 (i go thru phases where I want it, then phases of "get it off my Tilt") the first thing I do is remove the exception for PIE.
FYI.... Likewise, if you run any of the Cube or TouchFlo variants out there, you will need to put an exception into the TouchFlo settings for S2U2. What happens if you don't is when you try to slide to unlock (or slide to answer) you end up invoking the Cube or TouchFlo, instead of S2U2. Just an FYI for you....
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
CocheseUGA said:
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
Click to expand...
Click to collapse
that's the way to do it. I've been using PPC devices for years and years and everytime I get a new one, I try every hack, reg edit, tweak, and app possible.
I'm looking for alternative ways to lock my phone's buttons and screen when I'm not using it. So far I've been using standard lock app (HTC Home plugin has a shortcut of a lock in the apps tab) and I'm not real happy about it.
I've tried S2U2 couple of months ago - but it didn't work for me for some reason. Searching the forum showed locked threads and some plugins for S2U2 but no real info about it.
What do you guys use? And where can I find a working version of S2U2?
Thanks =)
If you press the 'end call button' (which is red on my MDA Vario III) for a few seconds, it should lock your phone.
Yes, I do have that app. However, the unlocking is the same process as it is with standard WM method.
I've found the thread with latest S2U2, trying it out..
I'd like something that locked the phone (deactivate buttons & a security function), but that could be unlocked by pressing hardbuttons rather than swapping from buttons to screen.
I've got a demo version (in compiled basic using .NET 2.0), but it's not quick enough & still needs the code to allow for answering the phone if it rings. Anyone fancy converting it to something more native to WM6 (i.e. faster)?
S2U2 is what I use and I find it great. Can also be set up to keep GPS running.
Have you tried "Device Lock 1.2 by Matt Armstrong" its basically an extension of the device lock thats already on the phone (although having the standard device lock installed is not needed), with the added benifit of being able to configure via settings what happenes to the screen when run (blanked, suspend) and also allowing easy unlock (one press unlock) + more, does exactly what i need (except schedule/auto lock)....
Dark, did you disable directdraw? that might be why it didnt work for you
_DrG_ said:
Have you tried "Device Lock 1.2 by Matt Armstrong" its basically an extension of the device lock thats already on the phone (although having the standard device lock installed is not needed), with the added benifit of being able to configure via settings what happenes to the screen when run (blanked, suspend) and also allowing easy unlock (one press unlock) + more, does exactly what i need (except schedule/auto lock)....
Click to expand...
Click to collapse
I did try it, and now after using S2U2 I'm liking the latter a lot more, actually. THe new version ahs some cool features in it.. I think I'll just stick with S2U2 for now.
XtreMe_G said:
Dark, did you disable directdraw? that might be why it didnt work for you
Click to expand...
Click to collapse
I didn't, unless it did so by itself. The v0.95 is working like a charm for me, I'm starting to get used to it =)
I use S2U2. It's an absolutely fantastic program.
How do I disable screen rotation on my Touch Diamond, specifically when using Opera?
I've tried Gyrator 2 but to no avail.
Solution:
Not elegant but...
Change registry HKLM\Software\Opera\GSensor\IdleTime to a very large number like 1000000.
not 100% sure but try deleting the gsensor.lnk file in windows\startup folder
I saw in one of the threads that even the phone dialer screen rotates. This doesn't occur in my phone. Does this happen in your phones??
m3_07 said:
I saw in one of the threads that even the phone dialer screen rotates. This doesn't occur in my phone. Does this happen in your phones??
Click to expand...
Click to collapse
Not as standard - only Opera (and one other that I have forgot about) rotates. However if, like me, you use GSen then other apps (you can choose which) will rotate. My dialer screen rotates as does my TT6 for example.
Thanks!!
I read reviews on Gsen & Gyrator still having some teething problems in this same forum. I don't mind to wait further before things like these gets ironed out.
If you are aware of something that is error free so far, appreciate a lead.
Ive been looking for a solution for my IGO
peterc10 said:
Not as standard - only Opera (and one other that I have forgot about) rotates. However if, like me, you use GSen then other apps (you can choose which) will rotate. My dialer screen rotates as does my TT6 for example.
Click to expand...
Click to collapse
But couldnt find one.
I see you managed to auto-rotate your tomtom.
is that possible with the iGo8?
I've tried adding that line in the gsen config but it still doesnt work.
I have had no problem with Gsen and it works fine for me. I can't answer if it works with Igo because I don't use it, but it works with TTN6. Having said that if I turn a corner sharply at the same time as hitting a bump it goes back to portrait for a few seconds.
smazhster said:
How do I disable screen rotation on my Touch Diamond, specifically when using Opera?
Click to expand...
Click to collapse
just a guess, but are you browsing Opera / Photo Album whilst lying down in bed, perchance?
i'm having the same issue, it's really annoying, no idea why they couldn't have a settings menu to toggle auto / manual.
Dr J said:
just a guess, but are you browsing Opera / Photo Album whilst lying down in bed, perchance?
i'm having the same issue, it's really annoying, no idea why they couldn't have a settings menu to toggle auto / manual.
Click to expand...
Click to collapse
Yes. But sometimes it also happens if I am carrying it and accidently tilt it.
Solved.
Edited registry HKLM\Software\Opera\GSensor\IdleTime to a very large number like 1000000.
This auto rotating has been drving me mad. People all were suggesting gsen and other utilities but they all are awkward. In the end this simeple trick did it.
Like Apple was the first to get the touchscreen done right after 20 years of touchscreen history, Apple also did the auto-rotate right. With an iPhone/iPodTouch, it won't turn more than twice, so you can easily avoid unwanted rotation. Why Windows Mobile develops cannot figure out simple solutions like that?
Thanks for posting this fantastic workaround!
I saw this thread weeks ago but lost it and couldn't find it again despite my best efforts with the search function & google.
Here's a CAB for it (my 2nd ever!):
Thanks alot .d
just a little FYI - the cab doesn't work for me...the program (Opera) still auto rotates. I have tried the manual hack too.
Any more info?
just a little FYI - the cab doesn't work for me...the program (Opera) still auto rotates. I have tried the manual hack too.
Any more info?
EDIT: Granted I'm using Touch HD
Wiggz said:
just a little FYI - the cab doesn't work for me...the program (Opera) still auto rotates. I have tried the manual hack too.
Any more info?
EDIT: Granted I'm using Touch HD
Click to expand...
Click to collapse
Found the solution! I'm so happy. I'm done with this stupid automatic rotation:
The trick about HKLM\Software\Opera\GSensor\IdleTime need to be done but you also need to remove in HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
the opera value.
I did the same for google maps and it works perfectly
I don't know about the rest but for HTC HD it's VERY SIMPLE!
HKCU\Software\HTC\HTCSENSOR\GSensor\AutoRotation = 0 (Default = 2)
My Problem was mostly with Dialer.No more screen rotation for me!
Davey101 said:
Thanks for posting this fantastic workaround!
I saw this thread weeks ago but lost it and couldn't find it again despite my best efforts with the search function & google.
Here's a CAB for it (my 2nd ever!):
Click to expand...
Click to collapse
thanks mate it worked with my touch hd.
you just need to install it in the same location in which you have installed opera.
HD Mini - Opera 10 Mobile autorotate disabled [solved]
Thanks Davey101. Your cab file works well with the HTC HD Mini to disable the annoying autorotate feature in Opera Mobile 10.
After a month and a half with the TP, I really wanted a better locker. One that would if the phone were in a given position would lock the phone if I forgot to. I can't count the number of times that I made "Case calls" becuase my phone resumed while in my belt pouch. This application works much better for me than the others out there.
I am still working on the UI (it's a bit plain Jane at the moment, but before I clean up the look I'd really like to get some feedback on the application and Ideas for the final "look" of the application.
Here is version 0.1.0.10. the First stable public Beta.
Once G-Locker is loaded, if you turn the phone in a specific direction the locker will engage. Then with a "flick" of the wrist in the correct direction, it will unlock.
The initial defaults are:
To Lock: Turn the phone with either long side facing down (or gently flick to the side).
To Unlock: "Flick" the phone in a side to side direction.
To adjust the settings lock the phone then press the Settings Button (You have access to the button for 5 seconds before it disables)
Available settings:
Locking Direction
Unlocking Gesture
Locking Sensitivity (gives some control over phone angle required to lock)
Unlocking Sensitivity (Controls the acceleration force required to unlock)
Number of Seconds to wait before checking to relock the phone
Options to:
Lock the Phone on Suspend
Check if the phone should be locked on Resume
AutoStart (NOT IMPLEMENT AT THIS TIME)
Lock the Panel when Starting G-Locker
(sorry no documentation yet, it will be included in the next release.)
Great, let me try a couple hours and i will post some feedbacks later.
Thanks for your effort!
I'm trying it as well. But isn't it the same as sensorlock?
pandaboyy said:
I'm trying it as well. But isn't it the same as sensorlock?
Click to expand...
Click to collapse
Mhm. But sensorlock developement ended. So I suppose it's best to continue it Althought I use TouchLockPro.
it's not work for me at all When i start it nothing happens
Device: Touch Pro
Kraize said:
Mhm. But sensorlock developement ended. So I suppose it's best to continue it Althought I use TouchLockPro.
Click to expand...
Click to collapse
The software confused me... It only locks my taskbar and I really don't know how to unlock it. So I simply uninstall it (because my screen wasn't lock)
Between SensorLock and TouchLockPro, I prefer SensorLock, because it's more simple. If i can program, i would just go with SensorLock and add the option of light sensor lock and it will be a perfect software.
Eh. SensorLock didn't do it for me. I'd rather use TouchProLock because I just have to tap the center button 3 times to unlock it . I actually have PocketShield + TouchLock Pro. It replaced S2U2 + SensorLock. I don't use PocketShield as a lock really, more as a screen saver since it's simple and has notifications. It's easier for me to look at when I'm just checking my phone to see if I missed something.
Actually the Old adage "he who hesitates is lost" fits real well here. I started this project about 7 weeks ago (when I couldn't find anything on google regarding a sensor based locker). Unfortunately it sat on the back burner for the past 5 weeks while I worked on hunting down the power and heating issues I was having. Then I never really bothered to do another Google search (until today) seems there are a number of these out there. I have looked at sensorlock today, It is very configurable, but not really what I am looking for (More of If the phone is in a given position then lock it, I'll have to look at touch lock pro. At this point though I'm inclined to drop this project unless I really can't find something else that works (no need reinventing the wheel any further!)
(BTW, I disabled the full lock rountine (except for the taskbar) for the beta version so I would not have to do a soft reset ever time something didn't work correctly)
Should I decide to resume development, I'll post here then. Thanks for those that took a look at it.
Sensorlock is no longer developed and is not at all perfect, il'd use this over sensorlock if there was an option to only lock the touch screen on wakeup from call, which is broken in sensorlock
Dude! If only this could be integrated with TouchLockPro!!! I'd love you both! Might want t have a talk with ZuinigeRijder. He releases the source for TouchLockPro also. I really think that GLocker + TouchLockPro = best locker for g-sen phones on xda-dev
Love ur Tool
Hey ive testet your Tool!
Worked great for me! keep on your development please!!
this app sounds REAL promising, il keep my eyes on the thread to see how it goes.
nice work!!
dear all...
i had install to my device but i had error... "This application requires a newer version of .NET compact framework"... my question is which version, because in my device had intalled "NETCFv2.wm.armv4i" .NET Version 2...???
please halp me...
i new in this device...
.NET v3.5 is available.
Look at this thread
i don´t know why, but i am not able to lock the phone.
i´ve startet glocker, but i can´t flick the phone to lock it. so please help me...
also the application restarts tf3d everytime i launch the .exe
G-Locker
the GLocker does not take effect on my Raphael
i have instaled it and also Microsoft .NET CF 3.5
do I miss something?
Tested on 6.5... Its working.
Gyrator
I'm using Gyrator for that ... you can assign actions to orientation and stylus status
Opera auto rotate really annoys me so i disabled it by following instructions
Code:
http://forum.xda-developers.com/showthread.php?t=439136
how ever i sometimes want the screen to rotate and so made a very simple application using basic4ppc to be able to rotate the screen (and adding it to my start menu to simply click to rotate), this worked good so i thought i would make it work when holding button1 (which is normally comms manager but really never use it) - everything worked fine.
i have since reset phone and reinstalled everything back the same way, however now when i hold button1 opera appears to close (or at least go behind tf3d)
any ideas?
larrytango said:
Opera auto rotate really annoys me so i disabled it by following instructions
Code:
http://forum.xda-developers.com/showthread.php?t=439136
how ever i sometimes want the screen to rotate and so made a very simple application using basic4ppc to be able to rotate the screen (and adding it to my start menu to simply click to rotate), this worked good so i thought i would make it work when holding button1 (which is normally comms manager but really never use it) - everything worked fine.
i have since reset phone and reinstalled everything back the same way, however now when i hold button1 opera appears to close (or at least go behind tf3d)
any ideas?
Click to expand...
Click to collapse
when u say button 1 do you mean the home button? if so then obviously it will take you to the tf3d lol
sorry, no button1 is the answer call button.
holding it down rotates my screen when using file explorer etc but in opera it no longer works. it used to work b4 i reset phone and reinstalled everything.