Database Develop

need help virtual keyboard

I've done a a lot of reading and made good progress, but I'm stuck on this one.
I'm using "Ruu_Signed_Duttys_WM6.1_Official_5.2.19209_1_58_16_27 [FIX]" build atm and while it's fast and I like it for the most part, the keyboard is horrible, takes up half the screen is missing keys and I really don't like it. I've tried to get back the original keyboard but it won't all me to switch from the one he has built into the rom. I've uninstalled the pcm keyboard and installing Keyboard_Cert.reg KeyboardSkins.CAB and also SJ KeybSkin_Touch.cab. in several variations. At best I was able to turn the keyboard white with black letters.
How can i get rid of the pcm keyboard and load the defaults.
please help
p.s. How come many of the dutty roms and have a password and they say the password is in the 1st/2nd post but it's not? I read some of those 6 times and searched them for "pass" and never found the password. I found some people listing a password later in the thread, but it was a password that did not work.

Am I writing in the wrong language or something? I've spent at least 20 hours reading wikii and faq's and post after post and seariching with google and the site's built in search only to wind up going in circles, trying to find specific answers, but not getting anywhere.
Would someone please point me to the info or just tell me ?

Still need help

yea this thread should be answered i have having the same problem..

I have Duttys Diamond V1 ROM. I didn't like the default kayboard or the XT9 that guesses what word your trying to type. My ROM did have the original defult keyboard installed but it would not stay my defult keyboard after a soft reset. I'm not sure exactly what you issue is but this might help.
Install "disable XT9" cab to disable XT9
Install "SIP change" cab change the defult kayboard to the one of you choice.
the above can be found here (look for post 139, should be the 4th post down):
http://forum.xda-developers.com/showthread.php?t=398271&page=161
I'm also including:
the "OEM default Keyboard" cab, with I assume installs the OEM keyboard (if you don't have it), and "Tilt keyboard fix" incase you have a Tilt with a hardware keyboard that dosen't have the FN keys coerectly mapped fot the Tilt.
Hope that's what you looking for.

Thanks worked fine only took about 1 min.

jonb2 said:
Thanks worked fine only took about 1 min.
Click to expand...
Click to collapse
Glad to help...

HTC Home?

So, I searched around here, and couldn't find any information on this...
Anyway, I don't like the TouchFlo very much... There's just too much going on at once. I prefer the good old HTC Home... But, when I install the version I have, it doesn't work.
Now I've read on a couple other sites that I might need the VGA version, can anyone confirm this, and if they can, where can I find a copy?
Thanks in advance!

Make sure you disable TouchFLO, and go here.
http://forum.xda-developers.com/showthread.php?t=351553

I just for fun tried that HTC VGA above, and it didn't work too well. Search for HTC home2 and it'll look good on the fuze. That's what I use. HHC works with it, also, although the examples are small.
Edit: finally figured KD8NS' post out above--You don't have to disable touchflo, like just posted, it's TouchFloF3D that you need to disable. Better yet, just use Da_G's ROM, and TF3D won't be there at all!!!

could you link to the file pls?

Fuze Full Qwerty virtual keyboard stuck on numbers
I've installed the NATF's v2.3 rom on my HTC fuze and now my full qwerty virtual keyboard is stuck on numbers. I've tried tapping the ABC button but nothing happens. Does anyone know a fix for this. I've heard there is a cab fix but I'm unable to find that specific cab file

Wrong palce to ask but here you go.
NATF's ROM http://forum.xda-developers.com/attachment.php?attachmentid=135789&d=1228781946

T9 Word Suggestion Oddity

Hi all, I've been unable to find a solution to this strange and irritating problem...all I have managed to find is this post describing the same thing.
Basically the phone will suggest words incorrectly and not show the real word you actually want. If you delete it and type the same again though it'll appear as normal. This occurs using both the Phone Keypad and Compact Qwerty.
Secondly the first word in the suggested list is a nonsense word every time though it is at least not selected.
e.g. typing hello on the Phone Keypad displays "gdjjm" before hello or "gello" using the Compact Qwerty.
I first encountered this after installing Dutty's latest ROM even though the change log for that says it's fixed. Today though I installed CT's latest ROM instead which initially had fixed the problem, however suddenly it is back just the same as before. If anyone has any idea what's causing this, or more importantly how to fix it, it'd be very much appreciated.
Thanks,
Mik

Anyone got any ideas?

Ive got the exact same problem. Quite annoying.
Im also on dutty's V4.
For example for me, i press 8 then 4 then 3 (to get the word "the") and it will produce something like "vif", which obviously isnt a word, i will delete the three characters and repress 8,4,3 and i will get the word "the" with other alternative suggestions. Happens only sometimes, and i think ive pressed a wrong button, but when i work out the letters, i know ive pressed it correctly.
Any help would be great (maybe this should be posted into dutty's thread)

kaos_king said:
Ive got the exact same problem. Quite annoying.
Im also on dutty's V4.
For example for me, i press 8 then 4 then 3 (to get the word "the") and it will produce something like "vif", which obviously isnt a word, i will delete the three characters and repress 8,4,3 and i will get the word "the" with other alternative suggestions. Happens only sometimes, and i think ive pressed a wrong button, but when i work out the letters, i know ive pressed it correctly.
Any help would be great (maybe this should be posted into dutty's thread)
Click to expand...
Click to collapse
Im also using dutty v4, and i get stuff like that happening all of the time.
for eg, i type "res" for "rest" and the suggestions are: "residents,bisho" , "Research" , "result" , "rest"
another, if i type "arg" for "argue" the first suggestion is "argumentation" then "argumentative" then "arguement" and there is no argue!!
i mean WTF is residents,bisho? i have never added that to my dictionary in my life!
Someone at Micro**** neads to learn how to spell, or optimize the way the dictionary is utilised.
It is funny, when i had a hermes, it came with windows mobile 5 and there was no problems there!
anyone know how to fix this?

I have the exact same "problem".
I'm not on dutty's, but am using CT's Version 6.4 HD now (used a few other versions of him too) and the problem occurs in all these versions.. Even the original ROM had this problem in my case.
It can be a little annoying so I hope there is a solution for this..
MysticGenius said:
another, if i type "arg" for "argue" the first suggestion is "argumentation" then "argumentative" then "arguement" and there is no argue!!
Click to expand...
Click to collapse
If you add "argue" to your wordlist, it will appear as the first word in the future, it's the best solution at this time imo, but i totally agree with you that a word like "argue" should be in the dictionairy by default.
Cheers!

whis said:
I have the exact same "problem".!
Click to expand...
Click to collapse
Just before typing this i have just send my friend the following
"you seduction to come to my place...."
when i was wanting to say "you sed to come to my place...."
i know im abbreviating said to sed, but shurely there is something else in the english language between sed.......&.......seduction!

I've had this on both Duty's and CT's latest ROMs so I wonder if the problem lies with the standard ROM on which they're based?
It's becomming very annoying to write messages as I'm having to type half my words out twice so it finds the right one! Can anyone help in any way?

maybe there is a solution to this problem
MikLSP said:
Hi all, I've been unable to find a solution to this strange and irritating problem...all I have managed to find is this post describing the same thing.
Basically the phone will suggest words incorrectly and not show the real word you actually want. If you delete it and type the same again though it'll appear as normal. This occurs using both the Phone Keypad and Compact Qwerty.
Secondly the first word in the suggested list is a nonsense word every time though it is at least not selected.
e.g. typing hello on the Phone Keypad displays "gdjjm" before hello or "gello" using the Compact Qwerty.
I first encountered this after installing Dutty's latest ROM even though the change log for that says it's fixed. Today though I installed CT's latest ROM instead which initially had fixed the problem, however suddenly it is back just the same as before. If anyone has any idea what's causing this, or more importantly how to fix it, it'd be very much appreciated.
Thanks,
Mik
Click to expand...
Click to collapse
I am from Romania (Europe) and I needed a romanianT9 so I installed the EzInput keyboard from http://forum.xda-developers.com/showthread.php?t=426281. But I also noticed that I don't have the described problem with the english T9 even if I also use Dutt's v4. I'm not sure if I had this problem before installing EzInput (because I didn't use english T9) but I guess that you guys should give it a try. Here is what you need:
later edit: I've just noticed that the Dutty's v4. already had the EzInput! Anyhow, it might work if you install the latest version of EzInput (wich I attached here).
And another thing crosses my mind: is it possible that the former version of EzInput (wich is included in the Dutty's v4 release) is actually the reason for all these strange behaviour?

cant install, but the uk t9cab did?

later edit: I've just noticed that the Dutty's v4. already had the EzInput! Anyhow, it might work if you install the latest version of EzInput (wich I attached here).
And another thing crosses my mind: is it possible that the former version of EzInput (wich is included in the Dutty's v4 release) is actually the reason for all these strange behaviour?[/quote]
I would agree with the fact that it is ezinput causing the issue, can you post a link to the thread instead of the CAB.
many thanks
MG

A solution
I installed the nordic Touch HD keyboard on my diamond from this link:
http://forum.xda-developers.com/showthread.php?t=460872
and it sorts the gibberish first word problem out. I am running Dutty v4

New to Diamond2, just required some basic help.

Hi everybody, I recently got a Diamond2 and found that the enormous amount of expertise and help available at xda-developers have really helped me enjoy this phone. The phone is not locally supported by any carriers or retailers in Canada so the availability of these forums have been a real help. I've run through most of the issues I've had with the phone (really like the Pro2 Interface better but was way to bulky) but have a few remaining that I haven't been able to find satisfactory answers for, hope you guys will be able to help.
I've downloaded and played around with what seem to be most of the prerequisite softwares: Advanced Config Tool, Klaxon, Changescreen etc. and have also made a couple of registry modifications to enable TF3D rotation and things like that. Here is where I'm getting into a bit of trouble. Although changescreen is a great app I just don't like to install a lot of things on my device and decided to try the regedit. After a soft reset it seemed to work great but was quite slow in switching over to landscape and back. At first I though this was a problem with the g-sensor so I opened up Opera to try it out and found that it was much faster. Obviously it's a lot less graphically intense but I was playing around with a Touch Pro2 before I bought the Diamond2 and it is also significantly faster, with the same processor and everything. I've tried to reduce the sampling time for the g-sensor down from 200ms to 100ms in ACT but that didn't really seem to help. Also I get some really weird lines across the tops of TF3D pages in landscape; in the All Contacts page for example the bar that contains "Search Contacts" will have at least three sets of distorted lines across it at regular intervals across the page. The wallpaper also seems to malfunction as instead of staying as it was, it will stretch across the width of the screen and as a result become extremely distorted. The dialer doesn't go into landscape but that seems to be a common issue. I've downloaded the Rhodium Phone Dialer although I haven't had a chance to install it yet, maybe that will fix the dialer issue.
I do have some app installed that changes the background of all tabs to be the same and this seems to have messed with the transparency of the tab bar and, occasionally the phone will fail to respond to screen swipes that would usually cycle through the tabs without using the tab bar. Maybe this app is also causing the other problems.
The help on these forums has already been a great asset and I was just hoping that I would be able to get some simple fixes for the issues with the landscape thing without having to install more software. Thanks in advance for any help, its all appreciated. Cheers.
PS, rom is 1.39.421.0 (47382) WWE

what you can do to improve things:
1. ditch stock rom and use tess rom
2. install flipit for rotation software - its better than the rest IMO

Thanks for the quick reply
Thanks for the quick reply, sorry I wasn't able to reply right away, got a bit busy at uni.
I was a bit apprehensive about installing a new rom but the one you recommended is amazing. The speed increase alone is unbelievable, doesn't even feel like the same device.
Everything is working great and the rotation is really fast now on everything except TF3D. It almost looks like it attempts to rotate and then fails. The title bars rotate around and then rotate back. I've added the regedit, manually removed and added it back into flip_it, but nothing seems to be working. Aside from that everything else seems perfect. Hope you'll be able to help, and once again, thanks.

oh yeah.. forgot to mention about manila in landscape
go to search and look for At0mAng & Danny_and_2 TF3D2 Tweak cab for topaz
install, and in the list of programs, there is option called Manila Rotate ON.
and thats it, you are all set...
hope this helps

joseph.sapri said:
1. ditch stock rom and use tess rom
Click to expand...
Click to collapse
Can I ask where to read and get this rom?
I am also new to Topaz.
Running on stock ROM
been reading around. reading on the various rom threads to decide which to use.
I am looking for something stable, fast (aren't we all?) and 6.1. Still got Manila and hopefully with Titanium built in. Also if possible with ringtones removed.
What would you recommend?
Thanks

Goondu said:
Can I ask where to read and get this rom?
I am also new to Topaz.
Running on stock ROM
been reading around. reading on the various rom threads to decide which to use.
I am looking for something stable, fast (aren't we all?) and 6.1. Still got Manila and hopefully with Titanium built in. Also if possible with ringtones removed.
What would you recommend?
Thanks
Click to expand...
Click to collapse
tess = topaz essential
http://forum.xda-developers.com/showthread.php?t=529260

Almost there
Thanks for the tip about the tweak program, installed it and followed your directions, manila is now rotating. However, its still incredibly slow; in the range of 3-5 seconds for transition to landscape and then around 1-2 seconds back to portrait. Also, those distortive lines I described earlier are back.
I was hoping for the kind of speed seen here http://www.youtube.com/watch?v=MPVgN5QuzO4 but I do realize that its a different rom. I've disabled and enabled TF3D and also done a soft reset, but no speed increase. I was thinking it may be a hardware issue but everything else works fine. One thing I have noticed though is that since installing this rom some programs get stuck half rotated and the other half of the screen will display the TF3D home page. Once again, thanks for all the help so far.
P.S. If I disable TF3D the blank today screen will rotate at the same speed as in that video if not faster. Also before when the menus rotated but not TF3D they were rotating at the same fast speed.

yes, I know what you mean.. at this stage, manila rotates pretty slow for me too...
I guess at the moment, we have to live with it... the slow rotation only happens on tf3d2 rite? the rest is ok...
as with hardware issue, I am sure it is not, cause topaz is still relatively new...
btw, Manila 2.1 is around, and manila 2.5 is coming too... so, maybe they would give better performance .
btw, the youtube link is a rom made by Tom Condon, and as you probably know, he is very active in building rom for topaz too... why dont you give him a message, or try his rom...
Tha

sorry double post again..

Sounds good
Glad to know that it wasn't just a one off issue. I'll give his rom a shot, was kind of wary b/c of the comments that said WM 6.5 was slow. Would you be able to direct me to somewhere that I'd be able to download TF3D 2.1 alone without a rom upgrade or anything or maybe even cooked into the TESS rom. Thanks for the incredible quick reply and for all the help so far.

mukhan said:
Glad to know that it wasn't just a one off issue. I'll give his rom a shot, was kind of wary b/c of the comments that said WM 6.5 was slow. Would you be able to direct me to somewhere that I'd be able to download TF3D 2.1 alone without a rom upgrade or anything or maybe even cooked into the TESS rom. Thanks for the incredible quick reply and for all the help so far.
Click to expand...
Click to collapse
if you follow tess forum, then the next release would have manila 2.1

Thanks
Ye, sorry about that didn't quite follow the forum all the way, I guess I'll be waiting. Thanks man.

Noob Need Some Help!

Hi guys, I just got my HTC pure a few days ago, and I'm trying to customize it. However I'm kinda a beginner at this, so I was hoping you guys would be kind enough help me with them. I have a series of question and any help is welcome.
1. How do I rotate the Manila screen? I had the TD2 tools install and it works on some programs. I think lyriquidperfection had already given the answer for this but I cant seem to find it. And if you're kind enough, please tell me how the programs work, coz there's no instruction anywhere.. BTW, the enable manila screen in the TD2 doesn't work and I have Manila 2.1.19183217.0 which the forum said should be able to rotate.
2. I cant get Manila to work with programs like S2P or Mircosoft Word, which is unusual since there programs support landscape view , any help with that?
3. I heard there a way for you to put shortcuts into Home tab, how do you do this? And can you change the background picture of other tabs other than just the home tab and the start menu?
4. At&T sent me a text said that I have to choose a data plan or they will choose one for me, which is a bummer. They changed the regulation in September and I didnt know anything about it. They should've sent mail to all customers about this. They didn't even tell me anything when I upgraded my phone until after the Sim card was activated. Anyway, is there a way to get out of this? if not, I read in the forum there a way for you to use your phone as a modern unnotice by AT&T, is this true?
5. Is there a way for the phone to rotate in more than the 2 default directions? When I check the G-sensor, it detects all directions.
6. The last one is flash ROM, there a ROM in this forum that the guys was able to make the Manila Screen Rotate sideway, and he got the music player rotates too. But I dont really like the look of the whole display. So my question is can I install a ROM and use only parts of it functions while left the others the way it is? And Do you think Flashing ROM is a better solution than using TD2 for G-sensor rotation?
Here a link to the ROM: forum.xda-developers.com/showthread.php?t=562942 (I cant post a link since I'm a new user)
Thank you in advance for all your helps!

3) Shortcuts in Manila home screen is a feature of Manila 2.5. You would have to flash to a ROM using this version. It is possible to have the same image in all tabs using one of two methods. Either with bg4alltabs or with HDWall. Search the forum to learn more.
I can't help much with your other questions as most are rotate based and i don't bother with that!

Thanks DirkGently1 for responding . I actually solved number 1, 2, and 5 which are all about rotation. I edited the registry of some programs and used G-config for the rest. Somehow it worked like a charm. For some reasons TD2 Tools didn't seem to work on my phone. For #6, it turned out I have to unlock my phone to be able to Flash ROM and I'm just happy with the way my phone is now so maybe in the future. Still #4, does anyone knows how to get out of the data plan?