Dear developers
We all know that when we have recieved a sms/email or a missed call that the led's around the action-button are not so bright. It's hard to see you have had a missed call or something in that category.
It's it possible to make a program that will light up the entire display in bright white light (or let it flicker 3 times fast) once a minute or so (and make it possible to choose your own interval)...
This would be a great addition for the TD!!
Anybody??
One of the custom tweaks available at Diamond TF3D Config is WakeUpOnNewSMS, that will bring to live your device on new sms
http://forum.xda-developers.com/showthread.php?t=405749
or you can just set to '0' the key HLM\Drivers\BUILTIN\RIL\DisableSMSWakeUpEvent
About the missing calls, the device already lights up and flashes.
I think the main problem about keeping waking up the device in intervals of time its the annoyince of pressing at random and taking actions on the phone without noticing.
Related
Hi all,
I know there are some topics on reminders and LEDs that aren't blinking, but I can't find any solution for the problem I have.
I own a HTC TyTN II, with ROM 1.56.405.5 (08/28/07).
When I set in the "Start" - "Settings" - "Sounds and notifications" - "Notifications" for the event "Reminders" the option "Flash light for NO LIMIT".
This does not work like it should be. (Missed calls seem to be OK)
At the time of the reminder, the screen turns on, message is shown AND amber light is blinking. This is all OK.
But when (after 2 minutes) the screen truns off (set in backlight settings), the amber light is turned off too!!! The green LED is blinking again.
When I look at my device (the LED), it seems nothing happened. I can only see that there was a reminder when I turn my screen on.
I searched the internet already, but did not find any solution for it.
- I discovered "Kaiser Notifications", but I don't want anything else to change, no reminders needed, only an amber blinking LED.
- I discovered this topic http://forum.xda-developers.com/showthread.php?t=290719 , that seems to be exactly the same problem as I have. I changed the registry as described, but this does not help on my device.
I hope someone knows how to tweak or solve this??
Thanks in advance!!
Sam
Hi all,
I tested this on another device (with same ROM) and it seems to be a bug in Windows...
Does anyone has the same problem?
Sam
Hi all,
new update...
I tested a HTC 3300 (Artemis) with WM6 and this shows me the same problem!
Reminders don't work like it should be!
Strange that no-one else has the same problem...
Sam
Problem solved...
Hi,
I found a solution to solve this problem on all devices.
Let's call it the "LedBugFix"
Just copy the CAB to your device, run the CAB en perform a soft-reset.
Now, the amber light should stay active until you "read" the reminder.
Note that in your "sounds & notifications" this checks for reminder should be:
[X] Play sound (can checked or not)
[ ] Repeat (SHOULD BE OFF!) (Can be solved by creating a WAV that plays for x minutes)
[ ] Display message on screen (SHOULD BE OFF!)
[X] Flash light for xxx (your choise)
[X] Vibrate (your choise)
Have fun!
Sam
samvds said:
Hi,
I found a solution to solve this problem on all devices.
Let's call it the "LedBugFix"
Just copy the CAB to your device, run the CAB en perform a soft-reset.
Now, the amber light should stay active until you "read" the reminder.
Note that in your "sounds & notifications" this checks for reminder should be:
[X] Play sound (can checked or not)
[ ] Repeat (SHOULD BE OFF!) (Can be solved by creating a WAV that plays for x minutes)
[ ] Display message on screen (SHOULD BE OFF!)
[X] Flash light for xxx (your choise)
[X] Vibrate (your choise)
Have fun!
Sam
Click to expand...
Click to collapse
Sam, You have no idea how much I have been looking for a solution to this flashing amber light problem. I have(or should I say, HAD) the Verizon XV6800(WM6). In the Sounds and Notifications for MMS, the option to turn on REPEAT and FLASHING LIGHT is greyed out and will not allow you to turn on these settings. Can you please tell me if your solution will or is designed to fix this particular problem for MMS? Also, is there some reason why "Display message on screen" must be turned OFF. Does this mean that the icon on the Today screen for MMS will NOT SHOW that an MMS has been received???
I'm really sorry that I can't try your solution myself, because I got so sick and tired of dealing with Verizon and UTStarcomm over this issue and the fact that ActiveSync was always turning itself on, that I finally got so worn out I just returned the phone within my "30 Day Worry Free Guarantee". I want this phone very badly, but bugs like this make me wonder what others exist that I had yet to discover. Dealing with these mega-corporations and getting nowhere just made me disgusted and fed up so I returned it.
I may be a glutton for punishment, but I am giving serious consideration to getting this phone again(It will be my THIRD time) so any help or suggestions would be greatly appreciated.
Your efforts to resolve this problem are commendable.
Regards,
Mark
samvds said:
Hi,
I found a solution to solve this problem on all devices.
Let's call it the "LedBugFix"
Just copy the CAB to your device, run the CAB en perform a soft-reset.
Now, the amber light should stay active until you "read" the reminder.
Note that in your "sounds & notifications" this checks for reminder should be:
[X] Play sound (can checked or not)
[ ] Repeat (SHOULD BE OFF!) (Can be solved by creating a WAV that plays for x minutes)
[ ] Display message on screen (SHOULD BE OFF!)
[X] Flash light for xxx (your choise)
[X] Vibrate (your choise)
Have fun!
Sam
Click to expand...
Click to collapse
Hi Sam
I've been searching for this but couldn't find the right entries. Found it just now. I'll give it a try and hoping it works like you say. Thanks anyway for you efforts.
I did give this a try and while it seems to work, my backlight now is an Max Low when I turn on the phone, Unlocking is then very difficult when driving. Once unlocked the display remains dim and when checking the display brightness sliders, they are in the correct positions that I last left them, just moving one causes the display to go bright again, until the next power on.
I un-installed the cab, reset, and all is normal again....wierd.
Just in the case you can simply fix this weird WM "feature" you can use DontForget application.
DontForget is easy-to-use and highly customizable Windows Mobile application that can repeatedly remind you of unread SMS text messages, unread MMS multimedia messages,
missed calls, unread E-mails and missed calendar events by sound, vibration, notification window or hardware LED.
DontForget also can do much more ...
More you can read in this thread
or directly here.
Hi all,
For some reason, my Diamond does not offer me the option of flashing the LED when a new email comes in (it's greyed out). LED would be really useful as it would save having to check the device - just like a Blackberry - any ideas on how to effect this?
Also, I have configured Email to be my "home page" using TF3D-Config (thanks - great util) - but anyone know how to make the Inbox (ie. list of messages) the default screen, rather than the graphical envelope (which doesn't seem to useful). Again - just like Blackberry.
As you guessed I'm using Direct Push with Exchange more than the phone!
Sorry to be requesting help rather than contributing help - but I've only had it a day since I retired my S620!
br/boss
The thing you thing is an LED is actually a light sensor.
New message notifications are done using varying types of white light around the center button. If you take a look at the user manual you will find out more.
There was also a detailed post about it once on here, but I can't for the life of me find it!!
Called it an "LED" as I couldn't think of another term! However - despite the user manual, the option for flashing notifications is greyed out, but strangely not for MMS. This is a Vodafone supplied Diamond, so one wonders whether they've turned email notifications off to encourage more spend on MMS etc... Maybe I'm too skeptical about operators...
Try Advance Config by Boinger66... ( its a sticky )
There you can set the time for all notifications including e-mail..
http://forum.xda-developers.com/showthread.php?t=406681
So do you not get any of this??
The buttons below the touch screen and the exterior edge of the
Navigation Control which is an LED ring will light up in the following
situations:
Controls Light Behavior
SEND button Light flashes when there is an incoming call.
END button Light stays solid when there is an incoming call.
Navigation Control The LED ring shows a “breathing” white light when the
battery is being charged.
The LED ring shows a solid white light when the battery is
fully charged.
The LED ring flashes a white light once when the battery
level is low and reaches down to about 10%.
The top and bottom parts of the LED ring flashes a white
light twice when there is a new e-mail, voice mail, or
meeting reminder.
A white light goes around the LED ring counterclockwise
twice starting from the top when there is a missed call or
new SMS or MMS message.
In short - no. The light pulses when charging but that's it - so that light itself works, but certainly not for notifications etc. And I'd already tried to install Boinger66's Advance Config but after what is reported as a successful install - there is nothing - no app - zip - and no app visible in "remove programs". As if it never was installed. And any subsequent reinstallation attempt causes "failed to install". I'm now really puzzled... esp. as Boinger66's thread isn't exactly riddled with a basic "app won't install query".
bosseye said:
In short - no. The light pulses when charging but that's it - so that light itself works, but certainly not for notifications etc. And I'd already tried to install Boinger66's Advance Config but after what is reported as a successful install - there is nothing - no app - zip - and no app visible in "remove programs". As if it never was installed. And any subsequent reinstallation attempt causes "failed to install". I'm now really puzzled... esp. as Boinger66's thread isn't exactly riddled with a basic "app won't install query".
Click to expand...
Click to collapse
Dis you first install 'Schaps_AdvancedConfig_v2.0.1.0'? (you have to have this installed before you install Boinger66's Advanced Config)
and then 'Advance Config by Boinger66'...
Thanks - that's certainly fixed the app installation issue, and the light now does flash on notifications. Although it doesn't seem reliable. More investigation required by me, probably lots of resets, and maybe it's fixed. Again - many thanks
Hi,
I have searched and searched, and all I have come up with are apps to install that will basically lock the screen. Im looking for something that I can do to have my phone vibrate, ring, when an SMS is received, but I dont want the phone to wake up from sleep. Preferably not a separate application. When my phone is in my pocket I will receive a text and it will dial peoples numbers, push buttons because the screen is then lit up and becomes active. I simply want the phone to stay asleep when a text is received.
I have tried the regedit addition that some X1/Diamond users have been using:
[HK_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableSMSWakeUpEvent"=dword:1
but it still does not work for me on my TytnII.
Any ideas?
A_C Slide2Unlock
Search for s2u2. I use it and when you recieve a text your phone lights up but unable to dial numbers or buttons being pressed due to your phone being "locked" by s2u2. It's a great program by A_C and has the ability to show you current weather, custom picture and even works in landscape mode. If you enjoy his program please donate something to him...Hope this helps.
Do you have your notification options set to display a message? I THINK I saw once where you could turn that part off and it would beep, but not wake the display.
Might be wrong though.
Ya, i have already tried turning off the notification message, the phone will still light up and wake up from sleep
For those of you that don't know Bedside,
It is a night clock that turns off all notifications while it's opened. However, if somebody calls you, it will ring/vibrate, or whatever ring mode you had before you opened it. For example:
- You set the phone to vibrate
- Open Bedside
- You get any notification, sms, email, other app, etc.. it wont vibrate or sound, nothing.
- You get a call, it will vibrate.
It has features like:
- TTS (Text-to-Speech), long press anywhere on the screen, and Bedside will say the time. You can enable/disable this on the preferences.
- Swipe Up/Down for Brightness Control.
- Battery Status
- Option not to turn off sounds (Clock Only).
- Ability to Keep Screen On, or just let it off along with your Display Timeout setting (Bedside will keep running).
- 24 Hours Format (TTS will say time in 24 hours as well)
- Text Colors
- Text Fonts (only for the time)
- Subtle Background (optional since it doesn't help with Brightness)
- Flashlight (on the menu, or also you can enable the Show Lightbulb option on preferences and a small lightbulb will show up on the top left corner for easy flashlight access)
As you can see, this app is very customizable and useful. It's $1.49 and available in the market right now.
There's a "Lite" version as well but it's missing many features that the regular version has.
Who wants SMS whitelist support????
bedside without clock
Hello,
is it possible to make a widget-app which turns off all notifications, except the phone - vibrate, without the clock function?
On a regular basis I'm on permanence for my work and do not be worried by notifications while sleeping, except if they need me by phone ring.
with kind regards,
Luc
lucky58 said:
Hello,
is it possible to make a widget-app which turns off all notifications, except the phone - vibrate, without the clock function?
On a regular basis I'm on permanence for my work and do not be worried by notifications while sleeping, except if they need me by phone ring.
with kind regards,
Luc
Click to expand...
Click to collapse
Yes, I have already thought about this and might start working on it soon, I'd like to finish the SMS (and maybe calls whitelists) on Bedside before doing a widget since it would be almost the same code.
Thanks!
Status on the new version (whitelists!), I've had some unconsistency problems, and I'm looking into it, haven't had the time to really fix it because I've been really busy with work/problems, but I'm getting back on track soon.
Hello,
I'm trying to solve multiple issues with the P10, maybe some of you could help with the following?
- How can I disable the sounds when changing the volume up/down? Currently it beeps for each change, and did not find any settings to deactivate it.
- How can I disable the LED completely during charging?
- Can I customize the LED color depending on the notification source (eg whatsapp green, facebook blue, instagram red)?
- How can I show all pictures as a single non-grouped feed in the gallery app? Like "just display all my pictures sorted by date desc". It's often tedious having to remember if the picture I'm looking for was received by whatsapp (and thus having to go into the gallery whatsapp folder) or if I shot it myself.
- Can I "ungroup" notifications? Means, if ebay is sending 3 notifications, I just want to show up all those 3. By default, they are collapsed to one "group" notification. I'd like to disable this and just stack onto each other.
- Can the keyboard be changed to show a single key for Google Voice? Currently the comma key has to be long-pressed in order to bring the voice input on. This is often tricky as the comma key is the shortest of all...
Thanks a lot for your suggestions!