Hi,
I want to create a data connection over csd line on my htc kaiser.
I wrote a simple software using tapi. This software run on htc s710 but it don't work on htc kaiser. I set the phone to use only 2g as written on securegsm site but nothing is changed.Htc kaiser is able to make outgoing data call, my problem is only with incoming call.
I also tried to change radio version but nothing...
I see at log and there is no at+cring message.
Please help me.
busa.andrea said:
Hi,
I want to create a data connection over csd line on my htc kaiser.
I wrote a simple software using tapi. This software run on htc s710 but it don't work on htc kaiser. I set the phone to use only 2g as written on securegsm site but nothing is changed.Htc kaiser is able to make outgoing data call, my problem is only with incoming call.
I also tried to change radio version but nothing...
I see at log and there is no at+cring message.
Please help me.
Click to expand...
Click to collapse
Did u solve that? I encountered the very same problem on Polaris. SecureGSM doesn't work either. They say HTC Polaris needs "professional setup" to work properly, that means mail your phone and money to them and wait.
Is it beacuse of the radio stack or RIL implementation?
Related
Hi,
Our office uses "09" to call the switchboard,
But with Kaiser (and also Hermes) the phone replies with "unknown application" and never puts up a call.
HTC Europe support says that they cannot fix this, reason is that Microsoft has done the dialer application and they will not fix it
I told them that Both Nokia and Sonyericsson phones works without any problem. Then he told me if I really needed this functionality I should send back the phone...
So,
Is there a third party phone application that I can use instead?
I don't know if this will help.. but I read once about some guy having a problem using his bank phone service... and apparently when he turned off keypad tones, it worked for him...
you may wanna give this a try, it won't hurt
cheers
solved
After some work in registry I have made it work.
The thing I did was to rename the value in registry key "DLL_MS", found under "HKLM\Software\Microsoft\DialParser" to "tpcutil_.dll"
I guess that the dll is used to parse phonenumbers and when dialer-app no longer can find the dll it does not parse phonenumbers any longer
Has anyone gotten VoIP to work with the kaiser? If so what provider are you using and what CAB?
I use VoIP with PBX in a Flash (home asterisk pbx). Click the Kaiser rom link on my sig. The VoIP cab I'm using can be found in the "recommended goodies" section of the first post there.
Thanks, I have downloaded the client and am looking for a VoIP provider that is proven to work with Windows internet calling and if possible the settings to go with it.
Bump......
Has anyone been able to use voip with the ear speaker yet? ( with the kaiser )
I use the Fring application to access Skype. What service/provider can use the built in voip?
jinkazama007 said:
Has anyone been able to use voip with the ear speaker yet? ( with the kaiser )
Click to expand...
Click to collapse
not yet. figuring this out is a pet project of mine. itmt I've gotten used to it. The Kaiser's main speaker is on the back in the same place so it works about as well.
I seem to have gotten calls to finally be accepted by I can't seem to make any outgoing calls from the phone via VoIP with SleuthKaiserVoIP.cab install. I think I'm missing something. I keep getting this following error. "Network service is not available. Try again later."
I had the same problem, but try this procedure on clean device (after hard reset), it works on my device:
1. Install SleuthKaiserVoIP.cab.
2. Install SipConfigTool_2_0_1.cab
3. Go to SipConfigTool and set up your provider.
4. Restart device
Now you can go to phone preferences and enable Internet calls.
ps. I'm not sure but when I install SetupVoIP_v0.3.cab with SleuthKaiserVoIP.cab problem occurs. With SipConfigTool everything work fine.
Thanks, I finally seem to be able to place calls and receive them but I can't hear anything nor can the other person hear me. I also noticed a bug but I'm not sure if its related to the first one where the other person can hang up and it says on the call with my phone as if the other person was still there. Any help would be greatly appreciated.
What operator do you have dan366?
I currently have VoipCheap but I'm willing to switch to fix this.
Bump......
simple it dont work properly
dan366 said:
I currently have VoipCheap but I'm willing to switch to fix this.
Click to expand...
Click to collapse
Sorry, what service provider is your phone through (some block VoIP).
I tried using it with AT&T's 3G network.
Please help me aswell
Mate, i just have had enough of this VOIP, i did managed to sucessfully configure the Service provider but when i am receiving call i cant hear the other person, they cant hear me and within 15 seconds the call disconnects, can you help at all !!!
Hey Every1,
While surfing the web lets say on a HSDPA connection if someone tries to call me they are automatically sent to my voicemail. I then get a text some time later saying I missed their call. The only way to solve this is to not use the internet and then disconnect the data session by clicking the h in the top bar.
Ive been searching through the forum and on the web in general and have seen this problem mentioned in regards to vodaphone but not t-mobile. In fact with t-mobile I have read that it should/does cancel the data session automatically to allow for the call or drop down to 3g so that call can be taken.
1) has anyone else experienced this problem?
2) if so is there a soloution? The only one I can think of is to disable hsdpa in the registry or set connections to cancel data connections after a small period of inactivity.
This is kind of frustrating when ure trying to find a friend and using google maps and he/she cant call get hold of u cos it keeps going to voicemail!!
Any help/other users on t-mopbie uk commenting on whether they suffer from this problem would be appreciated.
Im running standard tmobile radio (1.27.12.32)
Thanks
I'm using the 1.27.12.17 radio, and can make and receive calls when on an HSDPA connection. I'm on T-Mobile, too. Possibly change the radio and see if that makes a difference?
I get the same problem when using data on the HSDPA connection. When using 3G, the call will go through.
According to this: http://forum.xda-developers.com/showthread.php?t=321596 it is likely to be a network problem. Is it worth asking T-Mobile about this? Are people on other networks having this issue too?
Prufrock said:
I'm using the 1.27.12.17 radio, and can make and receive calls when on an HSDPA connection. I'm on T-Mobile, too. Possibly change the radio and see if that makes a difference?
Click to expand...
Click to collapse
Is that radio a standard t-mobile one or did u flash that ureself? Thanks
Did a bit of diagnosis and further reading on other info from other sites.
It appears I am not alone, and unfortunatly the information is varied some saying its networ and other the phone.
Its not just HSDPA but 3G to, if ure doing some data donwnloading it wont allow u take a call. The only way to have data and the ability to recieve calls at the same time is using standard gprs, which kind of defeats the purpose of having this phone in the first place. Here are some things i tried.
1) HSDPA ON - tried looking at some pages and whilst i was downloadin called from my other mobile to my kaiser, no luck took a while then went to voicemail. Once it finished downloading and it was inactive (but ie still up) it dropped down to 3g and accepted incoming calls. Also i tried to make a call while surfing and it worked fine. When i then rang from a 3rd phone whilst on the call i made it recieved it in hsdpa mode no probs (call waiting).
2) HSDPA OFF - Same as above to be honest not even worth dropping down as u cant even tell if it will accept calls as it just says on 3g rather than dropping down.
3) UMTS OFF - Works fine recieves data and make and recieves calls.
This is really annloying as it defeats the purpose of having this phone. Im quite happy to not surf and talk at the same time but i dont want to miss important calls. Id really like to know if any1 else is experiencing this problem and what they did about it, whether it is indeed network specific or a problem with me/all kaisers.
This also means u really cant have skype and or msn signed in all the time as it wont auto disconnect when a call comes in.
Thanks
thanutz said:
Is that radio a standard t-mobile one or did u flash that ureself? Thanks
Click to expand...
Click to collapse
Flashed it myself.
Prufrock said:
Flashed it myself.
Click to expand...
Click to collapse
Awesome...and everything is working fine on that rom? Did u have the rom I had to begin with?? Just debating whether flashign the radio rom may cure my problem
Thanks
Anil
Prufrock said:
Flashed it myself.
Click to expand...
Click to collapse
oh one last thing, when u flashed the radio rom did put a different software rom on it e.g. from t-mobile to htc original? As u had a radio file did u bother to sim unlock...how did it go...
Sounds like i might just flash the radio rom to see if it cures the problem and might aswell sim unlock it at the same time. Just curious to know ure experiences
Two links one 2 the radio u said and one to radio dump tools
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
http://forum.xda-developers.com/showthread.php?t=359015
Someone on T-Mobile please comment.....
Hi,
I'm on T-mobile UK, I'm on the standard WnW so dont have the HSDPA, but I did have the same problem on 3G, couldnt take calls while surfing.
It was bugging me as hell. After some research (out here and on some other forums) I tried the bandswitch app to change the band to GSM (it was on 'auto') and it worked. After a couple of days, I uninstalled bandswitch and reverted to 'auto' again and everything worked fine. I havent had problems and its been over a month now.
Regarding sim unlocking and CID unlocking, I've done that recently. I was on radio version - 1.27.12.11 and am now on 1.27.12.32
just waiting for a good stable 6.1 rom and will flash then.
hope this helps.
cheers
Thanks Koowdewil im gonna give that a try
Do u know where i can find the bandswitch app that you used???
here: ??? http://forum.xda-developers.com/showthread.php?t=286844
I emailed T-Mobile about this and here is there response:
Dear .....
I am afraid this is normal for this device. When you are browsing the web and the page has already loaded then the call will come through as normal. However if the device is still in the process of downloading the site then the call will go to voicemail. I am afraid there is no way round this issue as this is the way it has been designed by the manufacturers. Please contact us if you have any further queries. Thanks.
Regards
Stephen
T-Mobile
Yes, you could try there or just google it, danielherrero is the developer. I've heard about t-mobiles response but after switching the mode to 'gsm' for some time and then reverting back to 'auto' I havent had the problem.
Thanks so much gonna give this a try
I'm on T-Mobile UK and have flashed Duttys new 6.1 ROM and am experiencing this same issue. any ideas which is the best 6.1 compatible Radio for T-Mobile Uk?
Funnily enough I have started badgering T-mo UK about the 6.1 update already and they have started using there normal excuse of doing heavy beta testing compared to other CPs.
Typically ignoring them I am awaiting a response from my contact on the inside about the 6.1 update release....
With regards to the Call/HSDPA/3G issue I cannot say I have experienced this however 90% of the time mine is fixed to GSM lol
I've got a 3 PAYG sim and TM contract. Just tried this with 3 and call came in when streaming with realplayer and loading internet page no problem.
Same with test with TM too.
Using Duttys 6.1 with 1.64.08.21 radio.
Im on T-mobile UK with webnwalk and having no problems with this, I used a tweak to enable hsdpa/3g on continues so its always ON...
I can still recieve calls while using the inet at the same time.
Hi everybody, I am using GPRS and facing the same issue; No incoming call while GPRS is on... so any idea ?
regards
Well i looked to see for any solutions but cant find any, i dont now if its a setting problem or if its a malfunction but i cant make any out going calls but i get all incoming calls, i can send sms's but not make a call.
try this : start>settings>personal>phone>services
get settings for call barring, you'll see the incoming and outgoing call settings (both should be OFF by default)
if that dosen't work, maybe you could post some more info like the message you get when you dial out, ROM & radio version etc...
Didn't forget to pay your bill, did you?
I had a similar problem with my Orange TyTn 2.
Although i could not recieve incoming either.
I had previously flashed the ROM and radio to a HTC's current 6.1 from thier website.
I tried reflasing the radio to lots of different versions but still no joy.
In the end i sent it back to HTC and they replaced the main board, under warranty, thankfully.
Hopefully it is just a setting for you.
well i did that and they were off soo i just did a hard reset and it works now but its quite a big annoyance and if it happens again ill have to switch my kaiser cause its just unacceptable
Hi there,
I'm going crazy with my Touch Diamond. Since I have it, I've tried to test every functions except for videocalls. Now that I'm testing it i get an error which (roughly) says "Failure on videocall; what do you wish to do?" and I get four options "Try again, Make a voice call, Send SMS, Send MMS".
Has any of you had the same problem? If so, little help?
I tried to search the forum, the web, I called the operator and was told that there is no special configuration needed (not surprised), and i still can't make a video call.
Thanks to you all
I have the original Portuguese HTC Rom 2.03.410.1
---
Updated:
I tried to change Connection settings for Sel. Networks to "TMN Internet", soft reseted, made a video call and worked.
Then I change it back to "My Work Network", soft reseted, made a video call and ... worked.
I don't know if this was a coincidence or not, but it solved my problem