Hello
I'm completely new to apple computers, just acquired a ibook, mac os x (version 10.4.7) yeah I know it's a bit old.
I need to know how to connect my Kaiser phone to the mac, I know how to do this with my windows laptop and this works successfully.
I think I may need an mac activesync equivalent, please could you provide a step by step guide as to what to do please for usb and bluetooth connection with windows mobile 6.1.
Unfortunately tethering with a Mac is not as simple as with Windows. From my experience with MacBook Pro's, you have 2 options:
1) Bluetooth personal networking.
2) Modem script using USB. I don't believe you can get 3G speeds with this option, however.
I would visit the AT&T or Apple forums, or Google, for guides on how to configure the options above.
Related
I have been using WiFiRouter successfully to connect my Windows laptop to the Kaiser. Works great. I recently got a MacBook Air and attempted to connect it as well. The Mac recognizes the WiFiRouter when it searches for wireless networks but it registers it as a device, not as a network. I don't know how to make it connect through the "device".
Any thoughts?
michalopoulosgk said:
I have been using WiFiRouter successfully to connect my Windows laptop to the Kaiser. Works great. I recently got a MacBook Air and attempted to connect it as well. The Mac recognizes the WiFiRouter when it searches for wireless networks but it registers it as a device, not as a network. I don't know how to make it connect through the "device".
Any thoughts?
Click to expand...
Click to collapse
It works great on mine. I just connect to the device anyway - and it routes to internet regardless.
Any specific question on this one that I can help with?
-Daniel
Since I am a neophyte in the Mac World perhaps there is someting I need to do with the Mac itself. The WMWiFirouter works well with my windows laptop. The Mbair (airport) senses it sometimes and it lists it as a device. When I tell it to connect, it does not do it.
Could you please tell me what setup are you using with the Mbair that makes the difference? Is there any particular setting in the System Preferences that I need to set to make it work?
Thank for any help!
I was able to connect by uninstalling the old version of WMWiFiRouter and reinstalling the new one directly from the website. I went through right away.
Hello
I'm completely new to apple computers, just acquired a ibook, mac os x (version 10.4.7) yeah I know it's a bit old.
I need to know how to connect my HTC Diamond phone to the mac, I know how to do this with my windows laptop and this works successfully.
I think I may need an mac activesync equivalent, please could you provide a step by step guide as to what to do please for both usb and bluetooth connections.
LadyLady said:
Hello
I'm completely new to apple computers, just acquired a ibook, mac os x (version 10.4.7) yeah I know it's a bit old.
I need to know how to connect my HTC Diamond phone to the mac, I know how to do this with my windows laptop and this works successfully.
I think I may need an mac activesync equivalent, please could you provide a step by step guide as to what to do please for both usb and bluetooth connections.
Click to expand...
Click to collapse
my bad, miss understanding. sory..!.
So i have installed Athine lite, PDACornerUltimate.V17, and HyperDragon IV. Athine lite and PDA v17 are both based on WM 6.5 and i can not get WM remote desktop to work it just hangs @ connecting with no error messages. Hyperdragon based on 6.1, RD works just fine.
Any1 have a solution to get this working on v6.5? i have installed Mocha Remote Client and Terminal Services 2002 and both of those work just fine on WM6.5, but i really want to be able to map my device to the machine.
im currently running Athine lite as its fast and clean.
would you mind explaining how you got it to work the first time? im a little confused about the domain and ip address and such
so what is no one having a problem with this?
same problem here, just sitting on connect...
And there's no traffic since HSDPA doesn't kick in (switching between H and 3G symbol).
I've been trying Anryl's latest ROM's. 21202 rev 8 or 9 had RDP as part of the ROM at that connected ok.
I've just upgraded to his 21500 rev 5 and RDP is not embedded so installed from the .cab I used with WM6.1 and I get the hang at 'connecting' problem.
Don't really want to downgrade but may have to...
Same here. It worked with 6.1 but I install the same cab on 6.5 (Tai BlueCalm ROM) and it just hangs when trying to connect. I can't figure it out.
I found this link in XDA Developers and it works now for WM6.5.
http://forum.xda-developers.com/showthread.php?p=3592033
Was anyone able to establish a connection with this version of rdp 6.5? I only get connection errors when I try to connect to my Vista SP 2 System (works from any Windows XP and Vista device, so its no issue with my pc).
TyTN II & WinXPpro Remote Desktop connection without router or internet
Hello Everyone, forgive me if this question sound stupid but
I need to remote control my laptop using TyTN II Winmo6.1
1. I have installed WM6_RDP on winmo
2. I dont have router or any other intermediate communicating device.
3. Laptop & Mobile both Wifi capable.
can i use wifi capability of both devices and communicate between them. like ad hoc in windows XP
IF this is possible,
1. can you please tell me settings on winXP pro machine and what needs to be installed
2. Using Remote desktop on winmo how can i connect - settings please in winmo.
baseline: I need Remote desktop running on winmo over wifi with just one laptop and without router or modem
thanx in advance
sarang.hanwante said:
Hello Everyone, forgive me if this question sound stupid but
I need to remote control my laptop using TyTN II Winmo6.1
1. I have installed WM6_RDP on winmo
2. I dont have router or any other intermediate communicating device.
3. Laptop & Mobile both Wifi capable.
can i use wifi capability of both devices and communicate between them. like ad hoc in windows XP
IF this is possible,
1. can you please tell me settings on winXP pro machine and what needs to be installed
2. Using Remote desktop on winmo how can i connect - settings please in winmo.
baseline: I need Remote desktop running on winmo over wifi with just one laptop and without router or modem
thanx in advance
Click to expand...
Click to collapse
Yes you can with an ad-hoc connection. You'll have to google it though, as no one can tell you the exact details for your network as you will have to use an internal IP address. Start by googling how to use the "ipconfig" command in dos, as that's a good way to find out internal addresses quickly.
Start here:
http://www.microsoft.com/windowsxp/using/networking/setup/adhoc.mspx
Thanx for Reply Stuntdouble, but need more info
Thanx for reply stuntdouble but i need some more info regarding the same.
1. Link u have forwarded - I have already did before made a adhoc connection on my laptop and connected it from my winmo.
2. winmo cannot connect thru wireless though when connected thru USB get working fine.
3. I cannot even see a different machine other than my own PC in network neighbourhood.
4. I have installed Network access from HTC but it also dont show any computer in LAN conected while connected on adhoc.
please reply if this could be sorted.
thanx in advance.
Sounds like there's a firewall blocking the connection on your pc.
I have LAN cable connection on my laptop. It has wifi and bluetooth module. Is there any way to get an internet connection on my Nexus by using them? My laptop runs Vista.
Thx
if i understand correctly, you want to share the internet on your laptop with your nexus.
You need to configure your wifi on the laptop as accesspoint and connect the nexus with it.
Google internet sharing wifi
you can just turn on network sharing on your laptop... google is your friend here if you need specifics.
Is there any way to do this without a Wireless network card? Since I'm on the other side of the house and get intermittent signal with my N1's wifi. Can it be done using the USB cable? aka reverse tethering?
I don't think android supports this "reverse tethering". Actually I think only WinMo phones support it via Activsync, which is automatic as soon as you plug in your USB.
Makaijin said:
I don't think android supports this "reverse tethering". Actually I think only WinMo phones support it via Activsync, which is automatic as soon as you plug in your USB.
Click to expand...
Click to collapse
Damn I've just been trying to set up activesync on the Desire ROM... with no such luck
cypher21 said:
if i understand correctly, you want to share the internet on your laptop with your nexus.
You need to configure your wifi on the laptop as accesspoint and connect the nexus with it.
Google internet sharing wifi
Click to expand...
Click to collapse
Red MacGregor said:
you can just turn on network sharing on your laptop... google is your friend here if you need specifics.
Click to expand...
Click to collapse
Is there a way set up a non-ad hoc network on the laptop because the N1 is not compatible with ad hoc networks?
Although you can set up a software AP on your laptop, consider buying a WiFi access point. That way your laptop won't have to be plugged in either And its way easier to setup.
If you are using Windows 7 on your laptop, you can use Connectify (url is connectify.me) to convert your laptop into a wifi hotspot, which you can then connect your N1 to (via wifi)
thb said:
If you are using Windows 7 on your laptop, you can use Connectify (url is connectify.me) to convert your laptop into a wifi hotspot, which you can then connect your N1 to (via wifi)
Click to expand...
Click to collapse
What about for windows XP? is there an application similar to conectify.
Also just to let you guys know stock android does not let you connect to ad-hoc network sharing like some mentioned earlier. The devices does not see ad-hoc networks.
There is a issue request here about it.
http://code.google.com/p/android/issues/detail?id=82
...I'm more comfortable with xp so I'm doomed not to be able to set up an AP with my laptop...
I've been all over this connection and sharing internet connetion thing these days, and today it seems so close to work:
I paired my N7 and laptop on bluetooth, laptop with IVT driver, and N7 clearly shows in bluetooth - paired devices - profiles, under internet access, "connected to device for internet access".
yet all apps on N7 still say no connection.
god somebody pls help me!! It just doesn't make any sense!
btw, I did tick the option of "internet access sharing" and selected the bluetooth network in the settings of the internet accessing connection on my laptop.
I just don't understand whatever went wrong...
BrotherG said:
What about for windows XP? is there an application similar to conectify.
Also just to let you guys know stock android does not let you connect to ad-hoc network sharing like some mentioned earlier. The devices does not see ad-hoc networks.
There is a issue request here about it.
http://code.google.com/p/android/issues/detail?id=82
Click to expand...
Click to collapse
Yes, but it's not free. There is a free trial though if you want to make sure it works with your setup.
http://www.routersoft.net/
http://blog.laptopmag.com/how-to-share-your-notebooks-internet-connection-with-the-nexus-7
I've searched and searched, and I hope that someone has figured this out.
Has anyone tethered their Captivate to a Mac? USB tether only please. I know of Wifi tethering, but I like to enjoy my battery when I am done with my laptop.
I have it working in WinXP with Kies, but I would like to get it working on my Mac.
Thanks
Unfortunately, my snow leopard device is DOA right now, so I can't test it, but I think it should be as simple as plugging it in through USB when you have "PC Internet" chosen as your USB settings. I know it works instantly on Linux (without any drivers) and on windows with the drivers installed.
According to most references, a mac doesn't require any sort of "drivers" or kexts to get our phone compatible with it, so I would suggest just plugging it in and disabling your other connections to check
no go, it finds it as a modem, but won't connect... I found something online that said to add settings here and there, but it still isn't working...
Yes, it works on my Mac computer. Either you can configure it with complicated settings without any other software, or you can use PDAnet. You can get it on the market but it is censored by AT&T so you will need market enabler or be in airport mode with the wifi on