I have been using WiFiRouter successfully to connect my Windows laptop to the Kaiser. Works great. I recently got a MacBook Air and attempted to connect it as well. The Mac recognizes the WiFiRouter when it searches for wireless networks but it registers it as a device, not as a network. I don't know how to make it connect through the "device".
Any thoughts?
michalopoulosgk said:
I have been using WiFiRouter successfully to connect my Windows laptop to the Kaiser. Works great. I recently got a MacBook Air and attempted to connect it as well. The Mac recognizes the WiFiRouter when it searches for wireless networks but it registers it as a device, not as a network. I don't know how to make it connect through the "device".
Any thoughts?
Click to expand...
Click to collapse
It works great on mine. I just connect to the device anyway - and it routes to internet regardless.
Any specific question on this one that I can help with?
-Daniel
Since I am a neophyte in the Mac World perhaps there is someting I need to do with the Mac itself. The WMWiFirouter works well with my windows laptop. The Mbair (airport) senses it sometimes and it lists it as a device. When I tell it to connect, it does not do it.
Could you please tell me what setup are you using with the Mbair that makes the difference? Is there any particular setting in the System Preferences that I need to set to make it work?
Thank for any help!
I was able to connect by uninstalling the old version of WMWiFiRouter and reinstalling the new one directly from the website. I went through right away.
Hello
I'm completely new to apple computers, just acquired a ibook, mac os x (version 10.4.7) yeah I know it's a bit old.
I need to know how to connect my Kaiser phone to the mac, I know how to do this with my windows laptop and this works successfully.
I think I may need an mac activesync equivalent, please could you provide a step by step guide as to what to do please for usb and bluetooth connection with windows mobile 6.1.
Unfortunately tethering with a Mac is not as simple as with Windows. From my experience with MacBook Pro's, you have 2 options:
1) Bluetooth personal networking.
2) Modem script using USB. I don't believe you can get 3G speeds with this option, however.
I would visit the AT&T or Apple forums, or Google, for guides on how to configure the options above.
So i have installed Athine lite, PDACornerUltimate.V17, and HyperDragon IV. Athine lite and PDA v17 are both based on WM 6.5 and i can not get WM remote desktop to work it just hangs @ connecting with no error messages. Hyperdragon based on 6.1, RD works just fine.
Any1 have a solution to get this working on v6.5? i have installed Mocha Remote Client and Terminal Services 2002 and both of those work just fine on WM6.5, but i really want to be able to map my device to the machine.
im currently running Athine lite as its fast and clean.
would you mind explaining how you got it to work the first time? im a little confused about the domain and ip address and such
so what is no one having a problem with this?
same problem here, just sitting on connect...
And there's no traffic since HSDPA doesn't kick in (switching between H and 3G symbol).
I've been trying Anryl's latest ROM's. 21202 rev 8 or 9 had RDP as part of the ROM at that connected ok.
I've just upgraded to his 21500 rev 5 and RDP is not embedded so installed from the .cab I used with WM6.1 and I get the hang at 'connecting' problem.
Don't really want to downgrade but may have to...
Same here. It worked with 6.1 but I install the same cab on 6.5 (Tai BlueCalm ROM) and it just hangs when trying to connect. I can't figure it out.
I found this link in XDA Developers and it works now for WM6.5.
http://forum.xda-developers.com/showthread.php?p=3592033
Was anyone able to establish a connection with this version of rdp 6.5? I only get connection errors when I try to connect to my Vista SP 2 System (works from any Windows XP and Vista device, so its no issue with my pc).
TyTN II & WinXPpro Remote Desktop connection without router or internet
Hello Everyone, forgive me if this question sound stupid but
I need to remote control my laptop using TyTN II Winmo6.1
1. I have installed WM6_RDP on winmo
2. I dont have router or any other intermediate communicating device.
3. Laptop & Mobile both Wifi capable.
can i use wifi capability of both devices and communicate between them. like ad hoc in windows XP
IF this is possible,
1. can you please tell me settings on winXP pro machine and what needs to be installed
2. Using Remote desktop on winmo how can i connect - settings please in winmo.
baseline: I need Remote desktop running on winmo over wifi with just one laptop and without router or modem
thanx in advance
sarang.hanwante said:
Hello Everyone, forgive me if this question sound stupid but
I need to remote control my laptop using TyTN II Winmo6.1
1. I have installed WM6_RDP on winmo
2. I dont have router or any other intermediate communicating device.
3. Laptop & Mobile both Wifi capable.
can i use wifi capability of both devices and communicate between them. like ad hoc in windows XP
IF this is possible,
1. can you please tell me settings on winXP pro machine and what needs to be installed
2. Using Remote desktop on winmo how can i connect - settings please in winmo.
baseline: I need Remote desktop running on winmo over wifi with just one laptop and without router or modem
thanx in advance
Click to expand...
Click to collapse
Yes you can with an ad-hoc connection. You'll have to google it though, as no one can tell you the exact details for your network as you will have to use an internal IP address. Start by googling how to use the "ipconfig" command in dos, as that's a good way to find out internal addresses quickly.
Start here:
http://www.microsoft.com/windowsxp/using/networking/setup/adhoc.mspx
Thanx for Reply Stuntdouble, but need more info
Thanx for reply stuntdouble but i need some more info regarding the same.
1. Link u have forwarded - I have already did before made a adhoc connection on my laptop and connected it from my winmo.
2. winmo cannot connect thru wireless though when connected thru USB get working fine.
3. I cannot even see a different machine other than my own PC in network neighbourhood.
4. I have installed Network access from HTC but it also dont show any computer in LAN conected while connected on adhoc.
please reply if this could be sorted.
thanx in advance.
Sounds like there's a firewall blocking the connection on your pc.
Anyone know how to sync with Windows 7???
I've tried to install Windows Mobile Device Center 6.1, but it don't recognize my phone.. And ActiveSync won't even be installed due to compability reasons. (Doh, it's Win7)
I really like Win7, so it would be great to sync the phone
Try another cable or something, the mobile center should work.
ChumleyEX said:
Try another cable or something, the mobile center should work.
Click to expand...
Click to collapse
But the mobile is charging =/ So i don't think something is wrong with the cable and it worked just fine in XP (ActiveSync). And when I connected the mobile first time, the PC recognized it and installed the drivers for the mobile and the ActiveSync started on the mobile. Should it start on the phone when mobile center is running on the PC?
So does that mean you didn't try anothe cable? Because if you had researched this sort of thing (aka searched) you would find that the cables do this quite often.
phjott said:
But the mobile is charging =/ So i don't think something is wrong with the cable and it worked just fine in XP (ActiveSync). And when I connected the mobile first time, the PC recognized it and installed the drivers for the mobile and the ActiveSync started on the mobile. Should it start on the phone when mobile center is running on the PC?
Click to expand...
Click to collapse
i don't know what is the issue for you as i have win7rc1 and i can sync fine using the mobile device center.
If you are using 64bit Windows 7 then you need to download the updated drivers for the HTC. I am not sure exactly where Microsoft has these located, but it automatically downloaded and installed the new USB drivers that it needed just the other day for me......
Works excellent. I was using the 32 Bit version of Windows 7 before this and even though its based under Vista couldn't get it to synch up.
I have Win7 64 bit...with internet already established through another source, when I plugged in my tilt, it found the driver and installed it and has worked flawlessly ever since.
Works fine for me too on Win7 x64.
First, try another cable. USB has 4 connections, only 2 are needed to make it charge, but for communication it needs all 4. Maybe try another USB port on your PC as well.
And as said before, make sure you have an internet connection so it can download the drivers.
WMDC is already built in with Win7, so don't install any other versions from Microsoft Download Center.
Works fine for Win7 x64.
but Win7 x86 "NO"
you can use virtual XP mode for 32bit version
Updates?
Hi. I had this same problem following a hard-reset of my phone. After a while of searching I found that an update (designed for Vista) is available on the microsoft website. Downloaded, installed and sync worked first time. Yey
It should work with Win 7 RC 32 bit - does for me!
mouradlayeb said:
Works fine for Win7 x64.
but Win7 x86 "NO"
Click to expand...
Click to collapse
Then you're doing something wrong (such as not having the TyTN II correctly connected to your desktop PC or not having internet access on it to download whats required perhaps). I plugged my TyTN II into my Win 7 RC (32 bit) PC and after a bit of hardware detection and some automatic downloading it works (allbeit still with slow file tranfers but at least the UI is better than Win XPs Activesync). Welcome to xda-dev by the way
I think that it matters wether or not it's Windows7 RC.. Right after it came out someone was using the beta and it wouldn't work for them.
ChumleyEX said:
I think that it matters wether or not it's Windows7 RC.. Right after it came out someone was using the beta and it wouldn't work for them.
Click to expand...
Click to collapse
I was wondering the same but as the RC version is still avail for free until 20 Aug, anyone with the Beta should be formatting and installing this instead. Grab it while you can
I am running RC 7100 and I have no problem syncing.
Only issue I have now is, when the phone is connected, it won't let me delete or replace any .xml files through file explorer. This was never an issue with XP and Active Sync.
i just found what the problem is. Open settings on phone, then connection tab, open usb to pc... and there uncheck (enable advanced network function)
With it checked it didnt work on mine win7
sipols said:
and there uncheck (enable advanced network function)
Click to expand...
Click to collapse
I had that problem when I first bought my TyTN II but it was because I was attempting to connect it to my ancient USB 1.1 ports on my Pentium III. As soon as I installed a modern (but cheap) NEC chipset USB 2.0 PCI adapter card, I found I could connect fine either with or without advanced network functionality enabled. This is a USB port hardware compatibility issue rather than a Win 7 issue and I suspect even if users have Win XP on the machine that behaves this way, they'd still get the exact same response.
your speaking about USB 1 when others is speaking about Win7. If you dont know win 7 is the newest MS OS. So, i belive, all who use win7 have USB2. So there is question why you mention usb1?
And i didnt sad whole story. I had used phone with win xp for long time with that check on, and with one cabler... now on win7 i tried 2 diferent cables with that check on. Didnt work. Took it off and it started to work. So its Win7 issue.
sipols said:
your speaking about USB 1 when others is speaking about Win7. If you dont know win 7 is the newest MS OS. So, i belive, all who use win7 have USB2.
Click to expand...
Click to collapse
Thanks for the explanation but my Pentium III is capable of running (or should that be walking) Win 7 RC and it has USB 1.1 ports (as well as a USB 2.0 card now). Given Win 7 RC was avail free of charge - don't know if it still is, I got mine in June, there'll be people who get it just to see what it looks like, even though the hardware isn't up to ideal spec.
I don't know what ports were being used in your case because as you mentioned, full details weren't supplied and we didn't have the whole story - we still don't know. Glad you've resolved the issue in your case but in a modern PC which can comfortably run Windows 7, I wouldn't typically expect this to be an issue. If the hardware is struggling to keep up or has USB ports of dubious quality/performance, then thats a different matter.
Sounds like win7 (my main OS now days) communicates with the USB ports in a different manner than XP or the other OS's. Good to know.
Here's the thing: the place I work seems like CIA cause they don't even let me connect a pendrive to their computers. It makes my work harder cause I aways need to get some files to work at my notebook, and they make me go to the TI guy, who never is in his room. I found a fail days ago, that the computers recognizes my mobile as a storage device, so I could get the files from the server and work at home with it as a desire. But today they blocked my cellphone at all the computers, and I I'm pretty sure its blocked by the mac adress, cause my friend connected his S2 in the same machine and it wasn't blocked like mine. So, can I change the mac adress for usb connections? I know I can do it with wireless using some apks, but with usb I don't know. So, please help me.
ps: sorry about my bad english, I'm learning.