Dear All .
Does anyone know any software which enable me to send a SMS with a preset time.
I used to have a O2 Atom Exec which come with a build in software called O2SMS, which is a great software which enable to send SMS at a preset time.
Also, does anyone know how can I set my Annual Leave in Microsoft Outlook, then it will appear in Red Color (Just like Sunday)
Many Many Thanks for your help.
Greatly Appreciated.
hyclai said:
Dear All .
Does anyone know any software which enable me to send a SMS with a preset time.
I used to have a O2 Atom Exec which come with a build in software called O2SMS, which is a great software which enable to send SMS at a preset time.
Also, does anyone know how can I set my Annual Leave in Microsoft Outlook, then it will appear in Red Color (Just like Sunday)
Many Many Thanks for your help.
Greatly Appreciated.
Click to expand...
Click to collapse
Please Help Me .... I need this software urgently........ THANKS
here you go my friend
No keygens please dude! It's a no no on this forum!
Ontopic: Check out: SMS Scheduler by RJV
Please no more Keygens or warez.
Next one means a ban.
It's okay to make a mistake..
But it's noted.
Related
Hey Everyone,
I am looking to send a single sms to specific multiple contacts. I understand that the sms feature in WM6 allows you to autocomplete a contact by typing theyre name as you go, I am looking for however a CAB file or something that will allow me to do something like tick the people i want to send to?
I hope they're is something like this out for WM6, otherwise its a long time sending about 200 mobiles a new number ha ha.
I'm not a often poster, but long time viewer, and i know you all know your stuff and i'm thankful for anything you can tell me!
Sean Saunders
In Duttys 6.1 rom there is something called groupsms, I dont know how/if it works...but I know its there , may be what you are looking for
SeanSaunders said:
Hey Everyone,
I am looking to send a single sms to specific multiple contacts. I understand that the sms feature in WM6 allows you to autocomplete a contact by typing theyre name as you go, I am looking for however a CAB file or something that will allow me to do something like tick the people i want to send to?
I hope they're is something like this out for WM6, otherwise its a long time sending about 200 mobiles a new number ha ha.
I'm not a often poster, but long time viewer, and i know you all know your stuff and i'm thankful for anything you can tell me!
Sean Saunders
Click to expand...
Click to collapse
Don't know if you'd only be satisfied with ticking multiple names, but the auto-complete thing does allow you to type in more than one name. I assume you realized that? Alternatively you can just continually click on "add recipient" and select them all one-by-one, though that's a pain in the ass. I've found the autocomplete for multiple recipients to be pretty fast. Do you not find that to be the case?
I was chatting to a few people on palringo's MoDaCo group and one user suggested Jeyo Mobile Companion 2.0 Demo. It does exactly what i wanted to do on the phone but on windows XP!
I only really needed it as a one off but i would recommend it as a solutions especially if your going to use it reguarly
Thanks for your comments and suggestions though, your all good people!
Sean Saunders
you can try this software SMS Assistant from QimSoft
http://www.qimsoft.com/
After install, it will add one Menu item "Add Recipients" at the bottom of Menu
Click it then it allow you to multi select contact
yeah I use group sms as well you can find it in the development thread. didn't realize it was included in the 6.1 rom as well.
SeanSaunders said:
I was chatting to a few people on palringo's MoDaCo group and one user suggested Jeyo Mobile Companion 2.0 Demo. It does exactly what i wanted to do on the phone but on windows XP!
I only really needed it as a one off but i would recommend it as a solutions especially if your going to use it reguarly
Thanks for your comments and suggestions though, your all good people!
Sean Saunders
Click to expand...
Click to collapse
Don't worry mate there is an ultimate solution for GRoup SMS... Although i already answer this query in this forum before but anyway...
You definitely need a RJV SMS SCHEDULER OR SHUBAROO'S GROUP SMS 1.4.4 ...
just goto www.freewarepocketpc.net and search it there
cheers...
I know this topic has been posted before however I cannot believe that all of the developers, cooks and fanatics in this forum are unable to provide a fix to this query which I would be more than happy to donate for.
The call history on my Kaiser is by default limited to storing the last 2 weeks which is not satisfactory whatsoever which is why I would like a fix so the Kaiser does not have a time limit on the call history. I would like all my calls to remain on my Kaiser untill such time as I delete them manually.
All I want to now is whether this is possible or is there a 3rd party program which can do this? Thanking you in advance. Richard
rwcozens said:
I know this topic has been posted before however I cannot believe that all of the developers, cooks and fanatics in this forum are unable to provide a fix to this query which I would be more than happy to donate for.
The call history on my Kaiser is by default limited to storing the last 2 weeks which is not satisfactory whatsoever which is why I would like a fix so the Kaiser does not have a time limit on the call history. I would like all my calls to remain on my Kaiser untill such time as I delete them manually.
All I want to now is whether this is possible or is there a 3rd party program which can do this? Thanking you in advance. Richard
Click to expand...
Click to collapse
Hi dude
I don't know the right registry tweak to fix it (maybe someother know it!) but you can try the SKTolls app, but it isn't free, more info about it here!
From the main menu -> Tune Up! -> Phone Edition Tab -> set it in the "Call history legth" option!!
Ciao
...again here
just now i found this registry key! Use any Regeditor and go here:
"HCU\ControlPannel\Phone" and edit the key "CallHistoryMax" but i don't well remember if the "0" value is for unlimited number or really 0, no history. However try first to set "0" , soft-reset and test it! If you haven't call history the "0" is that, so edit it again to a number you prefer (the limit is about 65500, anyway i think it's enough for you!)!
ok, wish granted, please send your donation to the creator of KaiserTweak.
the_passenger said:
ok, wish granted, please send your donation to the creator of KaiserTweak.
Click to expand...
Click to collapse
Haha! If only the OP had used the "search" feature to begin with! LOL!
Would gladly donate and fortunately not stupid enough not to search.
I have both kaiser tweak where I have set call log to "Never" and have SK Tools where I have set call history length to maximum.
Could these 2 programs be conflicting each other?
rwcozens said:
Would gladly donate and fortunately not stupid enough not to search.
I have both kaiser tweak where I have set call log to "Never" and have SK Tools where I have set call history length to maximum.
Could these 2 programs be conflicting each other?
Click to expand...
Click to collapse
I've both these two apps installed, but, in my device, i didn't realize any conflict!
@[email protected] said:
I've both these two apps installed, but, in my device, i didn't realize any conflict!
Click to expand...
Click to collapse
Thanks for the reply. How long does your call history stay on your kaiser for just to establish whether your tweaks etc are working?
rwcozens said:
Thanks for the reply. How long does your call history stay on your kaiser for just to establish whether your tweaks etc are working?
Click to expand...
Click to collapse
...mmmh,i cannot answer you, or better, it's not useful for your purpose, because i've setted the number limit to 200 and the time limit to 1 month (it's enough for me), however i can only say that untill i don't manually delete the call history, it's always stored on my device without problem!!!
Ciao
Hi,
does anybody know how to change the softkey in the mail menue. My Problem is that when i receive outlook pushmail emails and i open a email that i want to answer i have only the option reply to all. In my old device i had the key reply or answer (it´s german ROM).
any ideas? because actually i have to go to menue and then reply. that works but the direct softkey Reply (not to all) would be better.
I have bepe's ROM v0.52 (German) and have noticed it too.
I think this is a translation error. Instead of "Antworten" it says "Allen Antworten".
that's no translation error, it's also in the standard wwe
roms.
i've noticed this since i have my diamond, but i don't
want to bother anyone here with that, because i think
that htc will fix this in a future release.
perhaps a regkey exists in which we could fix this for
ourself, i will investigate that!
for now, there is a simple solution: go to "menue>reply>reply"
and you would have the standard reply...
regards,
markus
Hello all,
I'd like to re-open this discussion, as this 'feature' is really quite a pain.
TML1504 said:
...i don't want to bother anyone here with that, because i think that htc will fix this in a future release.
Click to expand...
Click to collapse
I hear ya, but this is what this forum is for; I don't think people will mind.
Has anyone come across a way of modifying this soft key to once again serve as a "reply" only finction instead of "reply all"?
Any insight would be much appreciated!
Regards,
I came across this "bug" also, but I solved it by entering my own email address in the advanced options of my email account. When you don't do that and you hit the reply all button, you will reply to the original sender, but also to yourself.
This is how to do it:
1. Open active sync
2. Click MENU
3. Select: OPTIONS
You now see the items to synch with your exchange server.
4. Select EMAIL
At the bottom you have 2 buttons, DELETE and CONFIGURE (or something else in your own language)
5. Click CONFIGURE
You are now in the Syncoptions for e-mail screen
6. Click the Advanced button
In the Advanced email options screen, at the bottom you can fill in your email address.
7. Fill in your email address and finish all the upcomming screens.
When you now hit the Reply All button, you only reply to the original sender and not to yourself anymore. Furthermore there is no way to change it to reply instead of Reply All.
PilotFlying said:
Hello all,
I'd like to re-open this discussion, as this 'feature' is really quite a pain.
I hear ya, but this is what this forum is for; I don't think people will mind.
Has anyone come across a way of modifying this soft key to once again serve as a "reply" only finction instead of "reply all"?
Any insight would be much appreciated!
Regards,
Click to expand...
Click to collapse
Absolutely! What a dumb feature. Here is your fix my friends and, yes, that's why we're all here.
Using any Registry editor (like CeRegedit) here's the key.
HKEY_LOCAL_MACHINE\Services\OutlookEnhancement
Change the OutlookEnhancement dll value data to "" (double quote) and then soft reset.
Hope this makes sense to you but it works as I've been doing it after every hard reset for months and months!
Cheers
Brilliant!!!!!
Thanks very much for the fix, WMguy; it worked like a charm! On a side note, I find it a bit odd that they'd consider this an 'enhancement'
Thanks also to MRE-net for the suggestion. I in fact already had my email address assigned to the account, and didn't actually experience the problem of emails returning to my own account; it just bothered me that the "reply all" button was still present when it didn't make any sense, and I knew there HAD to be a proper solution. Turns out there was!
Thanks again to everyone for the suggestions. That's why I love this forum!
Keep up the good work!
Regards,
WMguy said:
Absolutely! What a dumb feature. Here is your fix my friends and, yes, that's why we're all here.
Using any Registry editor (like CeRegedit) here's the key.
HKEY_LOCAL_MACHINE\Services\OutlookEnhancement
Change the OutlookEnhancement dll value data to "" (double quote) and then soft reset.
Hope this makes sense to you but it works as I've been doing it after every hard reset for months and months!
Cheers
Click to expand...
Click to collapse
wmguy thats real nice thanks
hello i have the new windows 6.1 and the i cant set my ringtones with my receiving the text messages so what do i do also in the 6.0 i was able to see the amount of fwds in the text messages and now that option is gone
Hello and welcome to XDA. I am not tyring to be a jerk or anything when I say this I promise but have you tried using the search function?
Also I would guess that this should be in general not software.
actually not really cuz i know i may need software to enable this or maybe an admin might move it 4 me
Hello,
I have a TyTN II WM6.1 Mobile Phone. It's a nice phone, but I have one problem with it. The handling of class-0 SMS (= Flash SMS) is not Ok for me.
I my village I'm member of the voluntary fire brigade. If there is a fire alarm or something else we get a Flash SMS.
Now there are 3 problems with several importance.
1) Flash SMS is not been saved: Is there a way that Flash SMS is showed on the Screen and also saved for detailed reading (for example some time later)...
2) The keys are normally locked, but if I get a Flash SMS, it is possible to touch the "Close" Hotkey and the message disappear. That is problematic if I would like to put the mobile phone out of the trouser pocket and touch it unintentionally.
3) Also it would great if I would be able to set for that special Flash SMS a different sound.
I have found that Windows Mobile has generally a problem with that. In our company (http://www.fob-ps.at) we have several mobile phones (not only HTC TyTN II). Some colleagues are also member of their local fire brigade. So the have the same problem....
Hopefully someone is able to help me (us).
No one is able to help?
Bump?
I'm also struggling with this problem
Someone suggested to make a screenshot of sms, but this is kind of silly and not-so-useful...
I have exactly the same problem. Anyone haven`t fixed it yet ?? I`m trying with MassegeInterceptor but it doesn`t intercept class 0 sms.
No, I didn't find a solution until now.
There is only a workaround => disable Flush SMS / class-0 SMS by the sender (of course, if possible).
Same here, I'd be glad to see a solution (even if I'm a Diamond user, but this should be an issue of WM)
Yes, it's a issue of WM (specially on Touch-Screen enabled devices)...
On all WM I found that situation and there are a lot of different devices I was able to test. There were also some newer devices...
This thread looks dead but no harm posting...
Could you guys try changing this setting in registry:
Code:
HKLM\Software\Microsoft\Inbox\Svc\SMS
TreatImmediateModeCBAsClass0SMS to 0
This might help
Hello mohitsapru,
Thank you for your answer!
Sorry, but that isn't really a help.
by changing the following registry entry:
mohitsapru said:
Code:
HKLM\Software\Microsoft\Inbox\Svc\SMS
TreatImmediateModeCBAsClass0SMS to 0
Click to expand...
Click to collapse
all Broadcast SMS would be disabled.
They wouldn't be recognized by the mobile device SMS Manager. Therefore also no saving is possible....
For further information I found also an article on Microsoft Social
Andyt8 said:
Hello mohitsapru,
Thank you for your answer!
Sorry, but that isn't really a help.
by changing the following registry entry:
all Broadcast SMS would be disabled.
They wouldn't be recognized by the mobile device SMS Manager. Therefore also no saving is possible....
For further information I found also an article on Microsoft Social
Click to expand...
Click to collapse
Hmm but did you try it?
On my device it didn't help. As already written I get no Flash SMS after giving the value to "0". Maybe there is a problem with other addons?
However at the moment I changed to Windows Mobile 6.5.x (on TyTN II) and there it is possible to save Flash SMS out of the box. The value of the registry setting is there "1" - the same as on all other Windows Mobile 6.x devices...