Related
Welp I was fixing to pay Cingular $350 to prematurely cancel our contract b/c I was about ready to throw my POS 8125 out the window. Then someone referred me here and I'm cautiously optimistic that my blood pressure will once again be below 250/150.
But after reading through alllll the threads on alllll the roms...I'm a little more confused now than before.
Simply put, which ROM for my 8125 is:
Fastest?
Most Stable?
The custom AKU 2.2 ( http://forum.xda-developers.com/viewtopic.php?t=51047 ) was recommended to me...but now I've gotten lost...
Thanks.
I saw your thread on hofo. This place is 100x cooler and more helpful.
I've had my phone for less than six weeks and read a ton right before buying the phone. As soon as I bought it, I did all of this and haven't had any problems at all.
Get lokiwiz first. I used v0.2b and it worked fine for me. Be sure to take extra time to read the instructions.
http://forum.xda-developers.com/viewtopic.php?t=33796
Select your ROM and perform the upgrade:
ftp://xda:[email protected]/Wizard/Roms/Cingular/
I selected Cingular_RUU_WIZARD_217_AKU2_WWE_CF2_A2DP-fixed.exe from the directory. This is version 2.17 and I haven't had any problems at all. I've been following discussions on newer ROMs and plan to stay where I am for now. You can run this through Activesync and don't even need to establish a partnership. I did my phone, then 3 others all the same way (my wife's and then two for the neighbors) and didn't have a single problem with any of them. Running from the point at which you open the box and start going, this takes anywhere from 45 minutes to an hour once you do this over and over. I've only done this once per phone but seem to be operating a free upgrade service.
Finally, you'll want to hack the registry.
There are tons of registry hacks here:
http://www.indippc.com/v3/index.php?topic=322.msg2018;topicseen
and here: http://wiki.xda-developers.com/index.php?pagename=WM5_Tweaks_Other
and here: http://forum.xda-developers.com/viewtopic.php?t=38957
You'll probably want to use Resco explorer and their registry editor. Those are nice because you can try them before buying them and make sure you like them. There are others and I tried Total Commander first, but found the Resco product more effective for importing the .reg files I'd created to help speed up the edits.
Hope this helps!
100Tbps, that's awesome info. Thanks for pointing this out. There are a ton of threads with tons of info scattered through and it's easy to miss something. I remember reading that somebody suggested putting all this info in one thread or post and you seem to have done most of it.
One question, is creating a .reg file for WM5 just as easy as creating it for XP/2K? I would like to put my favorite tweaks in one .reg file and import one file.
Thanks!
Well with such a great reply like that, I'd have to agree that this place is beter than hofo.
Concerning Rosco, do you think that it would be better than SPB Pocket Plus? I only ask b/c I read on hofo that Resco slowed the 8125 down more than SPB....but I've been running SPB and it definately slows down my today screen refresh. Does anyone know anything about this?
Also (I posted this in hofo, but I have yet to get an intelligent reply), how does everyone's video run on their 8125? I'm wondering if something is wrong with mine b/c pretty much everything that I try to play only plays at about 0.5 frame per second but with normal video. For example, navigating to the windows media favorite that comes bundled into the favorites menu while my 8125 is connected via USB to my broadband connection, and then clicking on ANY of the videos (they are either 37kb or 54kb) gives me this problem. It's reallllly annoying as I was hoping to later hook up my 8125 with a slingbox--but if I can't get any videos to play normall...this obviosly won't be feasable. Is this par for the 8125? Or is mine just screwy? And yes, this is after both a fresh factory ROM installation and the new 2.2 beta I just installed. Same problem.
Thanks!
hesh said:
100Tbps, that's awesome info. Thanks for pointing this out. There are a ton of threads with tons of info scattered through and it's easy to miss something. I remember reading that somebody suggested putting all this info in one thread or post and you seem to have done most of it.
One question, is creating a .reg file for WM5 just as easy as creating it for XP/2K? I would like to put my favorite tweaks in one .reg file and import one file.
Thanks!
Click to expand...
Click to collapse
Creating the .reg file is very easy. I used Total Commander on my phone to create the .reg files. When I hacked my wife's phone, I discovered Total Commander didn't recognize the .reg files and that's when I tried Resco's product. Their program registered the .reg files but even better, has an import button. So I placed all my .reg files in one place and one by one went through and imported them. I have just under 20 of them. If I ever get time to figure out how to do this, I'll probably try to condense them into larger .regs or learn how to make a .cab.
Stangs55 said:
Well with such a great reply like that, I'd have to agree that this place is beter than hofo.
Concerning Rosco, do you think that it would be better than SPB Pocket Plus? I only ask b/c I read on hofo that Resco slowed the 8125 down more than SPB....but I've been running SPB and it definately slows down my today screen refresh. Does anyone know anything about this?
Also (I posted this in hofo, but I have yet to get an intelligent reply), how does everyone's video run on their 8125? I'm wondering if something is wrong with mine b/c pretty much everything that I try to play only plays at about 0.5 frame per second but with normal video. For example, navigating to the windows media favorite that comes bundled into the favorites menu while my 8125 is connected via USB to my broadband connection, and then clicking on ANY of the videos (they are either 37kb or 54kb) gives me this problem. It's reallllly annoying as I was hoping to later hook up my 8125 with a slingbox--but if I can't get any videos to play normall...this obviosly won't be feasable. Is this par for the 8125? Or is mine just screwy? And yes, this is after both a fresh factory ROM installation and the new 2.2 beta I just installed. Same problem.
Thanks!
Click to expand...
Click to collapse
I actually don't have the Resco product installed on my phone. When I hacked mine, I used Total Commander for regedits, then used Resco on the three other phones. I actually installed it when I was done, but I'm more than likely going to go back and buy it the next time I need to do this. I haven't tred the SPB product so I can't say.
For videos, this might be a more complex discussion.
If you mean recording videos, there is a thread around here explaining registry hacks to increase the frame rate when recording so it plays back smoother. I thought I had it in my collection but don't see it, but I do recall seeing a discussion about this.
If you mean streaming videos over the net or files placed on the SD card or in memory, it could be one of a few things. You may need to overclock the player to get it to play more effectively (this is 100% a guess), try a different player (I've seen people bow down to TCPMP), or the bitrate may be too much and / or an oversized video. Hopefully others will chime in with their experiences about any of these avenues since I've said a bunch without really offering anything concrete. I believe TCPMP is free so that may be the easiest thing to try.
thanks.
I'm actually talking about streaming any video. It's not a bandwidth problem b/c I've tested it while connected to my home broadband over usb. And it's not the server b/c I can turn right aroung and stream the same crappy qualit 37kbs video on my pc and it plays fine. It just seems like the 8125 should be able to handle this w/o any problems...
Stangs55 said:
Concerning Rosco, do you think that it would be better than SPB Pocket Plus? I only ask b/c I read on hofo that Resco slowed the 8125 down more than SPB....but I've been running SPB and it definately slows down my today screen refresh. Does anyone know anything about this?
Click to expand...
Click to collapse
I use Spb Pocket Plus and I like it a lot. It does slow down the 8125 a bit but I don't think it's any worse than Resco's product, though I don't remember using Resco's. However, SBSH's iLauncher is pretty good. It has a ton of options, much more than Pocket Plus, but Pocket Plus just seems to be a more refined product. You might want to give iLauncher a try.
http://www.sbsh.net/products/ilauncher/
100Tbps said:
I have just under 20 of them. If I ever get time to figure out how to do this, I'll probably try to condense them into larger .regs or learn how to make a .cab.
Click to expand...
Click to collapse
I am soon to be owner of Cingular 8125, so I am reading every thread I can find on how to improve HTC Wizard.
Could you possibly zip all of .reg files and post them in this thread?
Thanks for your help!
raven2000 said:
100Tbps said:
I have just under 20 of them. If I ever get time to figure out how to do this, I'll probably try to condense them into larger .regs or learn how to make a .cab.
Click to expand...
Click to collapse
I am soon to be owner of Cingular 8125, so I am reading every thread I can find on how to improve HTC Wizard.
Could you possibly zip all of .reg files and post them in this thread?
Thanks for your help!
Click to expand...
Click to collapse
I was going to ask the same thing lol
I divided these into things I think anyone would want (the general folder) and things that may just be personal preference (the personal preference folder). For example, some people may use Hotmail and thus not need to remove it from the list of Inbox options - and not everyone uses Microsoft Voice Command and wouldn't want to change their dialer to something not installed - so these are in the personal preference folder.
These are what I extracted from my phone after I edited them manually (using the 2.17 ROM summiter cooked for us) and created the reg file for my own future use in case I re-flashed. I think it's important to mention newer ROMs may not need some of these because they may already be there because Microsoft (or summiter, the grande provolone of ROM cooking) enabled them - or the registry may be different. So my suggestion is manually verify the path is present before importing to make sure you're actually getting what you want.
Thanks for that
I installed the fixed 2.17 and so far so good...except for one rather big problem--the battery meter no longer works. It just tells me that I always have 100% battery life and the icon at the top taskbar now looks filled in with a single line diagonally across the center. How do I fix this? I also should mention that I'm now using Resco Explorer 2005 5.40...so I don't know if the problem is related to the firmware or Resco.
Any advice? Anyone seen this before?
Okay. I completed the following steps on my new Cingular 8125
1. Used Loki .2b to do CID and unlock - Don;t have another SIM to test but seemed to work
2. INstalled Cingular_RUU_Wizard_AKU2.3_Custom_RNG_THM_A2DP_TEST
3. Installed the 2.25 radio from kypher (sp) update.
Everything seems to work great and response times seem stellar so far but I do have a few questions...
A. When I go into Remove programs I see the following programs
FdcSoft PPC ContactsMgr
ammar Wireless Today Plugin
Summ Summ
What are these, what are they for and can they be deleted since I don't seem to find matching entries in programs for them?
B. Under Programs there are three called Clock200 240 and 252. I am guessing these are overclockers but clicking on them does not seem to do anything. How do these work?
C. Should I delete the cab file I x-fered over for the Loki unlock?
D. While some of the sound files that came on the ROM are cool, I would like to get rid of most of them. How do I do this?
General questions
Is there a profiles setting where for example I can choose a sleep profile so that the phone rings but e-mails don't do anything or is this a 3rd party app deal?
Has anyone ever had issues with having two different IP addresses for your exchange server? It seems that when I put in the IP address into Active Sync that I use to get Outlook Web my phone connects fine when out and around but when using USB errors out. If I put in the exchange server name my IT guy gave me I get the opposite. He is kind of helpless and clueless so any help here owuld be greatly appreciated.
I can help a little, The wireless today plugin is the one that appears on the today screen showing wifi on off and bluetooth on and off. The clocks are overclockers and they dont show anything happening but it does overclock your phone. Sorry I can answer the rest but hopefully what I have said helps some.
Hey every bit helps, thanks!
dcdivenut said:
A. When I go into Remove programs I see the following programs
FdcSoft PPC ContactsMgr
ammar Wireless Today Plugin
Summ Summ
Click to expand...
Click to collapse
FdcSoft PPC ContactMgr is a replacement on the contacts of the phone - less buggy than the stock one, and no - don't remove it.
Summ Summ - is the alternative task manager that you see in programs. If you wish, delete that one. Personally I like it, because when you close it, it actually closes.
dcdivenut said:
B. Under Programs there are three called Clock200 240 and 252. I am guessing these are overclockers but clicking on them does not seem to do anything. How do these work?
Click to expand...
Click to collapse
They are overclockers, and yes they do work, but generally there's an omap that you run in conjunction with other programs. There's an omap.exe file that you can re-do on shortcuts that will have a manual clock setting on simply just the program itself, but I'd find the thread that discusses omap overclocking.
dcdivenut said:
C. Should I delete the cab file I x-fered over for the Loki unlock?
Click to expand...
Click to collapse
Leave it...
dcdivenut said:
D. While some of the sound files that came on the ROM are cool, I would like to get rid of most of them. How do I do this?
Click to expand...
Click to collapse
Not sure you can delete some of them, because they're taking up ROM space, but not other memory. Check windows\ringers and see if they're in there and deletable.
dcdivenut said:
General questions
Is there a profiles setting where for example I can choose a sleep profile so that the phone rings but e-mails don't do anything or is this a 3rd party app deal?
Click to expand...
Click to collapse
Can't really say I can help with this one, but from my experience with the phone, there's nothing in it that has different profiles other than just ring, vibrate, and sleep. Try looking for some third party aps.
dcdivenut said:
Has anyone ever had issues with having two different IP addresses for your exchange server? It seems that when I put in the IP address into Active Sync that I use to get Outlook Web my phone connects fine when out and around but when using USB errors out. If I put in the exchange server name my IT guy gave me I get the opposite. He is kind of helpless and clueless so any help here owuld be greatly appreciated.
Click to expand...
Click to collapse
Can't help with Exchange setups, haven't touched them in forever =)
Hope some of this helped.
THanks a bunch Brian....
I have noticed a few things.. I seem to be getting the error where the time zone drifts. In my case it tries to put me in Indiana. Was there an easy/common fix for this.
Also, it seems to not hold a wifi signal very well anymore. Is this the problem you were experiencing. I installed Wififofum2 but did not get much time to play with it, but in the time I did could not get it to pick up a network at all.
I'm having wifi issues as well with a belkin pre-n, and my srx router doesn't hold its session and ip info.
The fix has been that summiter release a test2 rom, which I'm about to flash my unit with. There is also discussion of trying to get a seperate thread on radio roms which i believe deals with wifi as well, and you don't have to re-flash your entire os just to get a new radio rom.
Also, here are the images you may be interested in:
http://www.legolascs.com/images/wizard/upgrade_aku2.3/
Thanks again Brian
dcdivenut said:
Thanks again Brian
Click to expand...
Click to collapse
no problem man. as I type this message from the fresh test2 rom that summiter updated the gsm radio with, I'm finding that it is staying connected to my srx, and on the middle performance setting. what I am also noticing is my reception here in my room, dear god, I use to get to bars being lucky, but now man, jesus, full bars, its amazing. I do notice the reception does jump up and down a lot more but that's fine with me. overall the radio version in test2 seems to rock my sox. we'll see if it holds out for this really long post.
well scratch that on the wifi problem, had to reconnect to my router again... ugh, but better reception for cellular!
mengesb said:
FdcSoft PPC ContactMgr is a replacement on the contacts of the phone - less buggy than the stock one, and no - don't remove it.
Click to expand...
Click to collapse
I will have to disagree with that. The PPCContactMgr caused scrolling problems with my contacts, and I wasn't the only one this happened to. For example, if you hold down the D-Pad in while in contacts, it scrolls the the alphabet in very large letters allowing you to stop easily at a certain letter. This program screwed that up for me. It worked OK if I just scrolled through a few letters, like to "D", but if I scrolled all the way to "T" for example, then selected a name, it would throw me back at a random name much earlier in the list.
Removing this program fixed the problem.
The only thing this program really gives you is the ability to "select all contacts", if you wanted to delete them. It's not worth the problems. I'd remove it.
Has anyone managed to stop SMS from working? Something I've tweaked or installed is preventing me from sending messages - when I tap the SMS option nothing at all happens. I don't seem to be able to receive them either. With all the fiddling (Kaiser Tweak, GPRS Monitor, SBP etc) who knows what I've done. Just hoping someone else may have stumbled over the same problem before I have to reset everything back to original (It's the only fault).
Thanks
Are you able to compose an SMS at all?
Have you verified that your Text Message Service Center number is not blank?
Please provide more information. Phone, ROM, Carrier, etc...
Thanks for the interest,
I'm using WM6 standard ROM 1.82.707.0.WWE (ie not cooked) on the Tytn2, the service centre number is there and is correct according to the carrier (Telstra Australia).
It used to work fine so I'm assuming that I've tweaked something I should have left alone, or one of these installs has jammed it up - just no idea what!
If I pull up a contact and tap the 'Send Text Message' option nothing at all happens, just sits there looking at me! I don't seem to be able to receive texts either.
Installed are the standard apps plus Google Maps, GPRS Monitor, Kaiser Tweak, Resco File Explorer, TomTom, SPB mobile Shell and Diary, QuickMenu.
I know it's a tricky one to fix from a distance (so many settings, so little patience) but any thoughts would be appreciated.
I had the same problem a few months ago and tried everything. Defaulted my tweaks and adv config etc. Eventually I had to reinstall my rom which is a cooked rom and all came back and have not had any problems since then. Hpefully you do not have to do this. You should try a cooked rom.
Ok I want to take a shot at this.....
Ok Does Telstra have the ability to send SMS to mobiles from their website? If so try sending one to yourself.
Next. Go into Messaging, Menu -> New -> SMS. Type in your mobile and Send.
Oh and Uninstall The SPB product Soft Reset and try again.
Let me know If that works.
Can't find a way to send sms from telstra (easily) so tried from another mobile. The other mobile says it can't send the message. I'm (almost) sure this is my phone rejecting it rather than a network of other phone's fault.
When I tap on Messaging in the menu nothing happens - doesn't take me anywhere at all. Same thing if I tap on 'send text message' option in contacts.
Removed the spb stuff, did a soft reset, still no go.
Keep the thoughts coming though. In the end it would probably be easier and quicker just to hard reset now, but it's the challenge of figuring it out that's interesting isn't it? It's going to be one of those dead simple slap your forehead things I reckon.
Thanks for all the help so far.
Have you tried reinstalling the Arcsoft SMS/MMS client? There are many different versions floating around XDA.
OK it's fixed. Here's what I did:
Discovered that the 'Messaging' menu item in the start menu pointed to a file called tmail.exe
Used file explorer to navigate to tmail and ran it directly
Fell over laughing when it actually ran
From that time on it works via any link, such as the start menu and contacts option to SMS
I have no idea what that's all about but I'm really happy to have it back - although I haven't tested sending and receiving texts yet
Interestingly a very similar thing happened to Mortscript - I have a script that rotates the screen and runs TomTom (not mine, found on xda-dev) and it wouldn't work either after all this fiddling until I ran it directly rather than through any links. Now it works fine too.
If anyone knows /why/ it happened I'd be interested.
Thanks for all the support. Really great knowing there's such a community around.
Alrighty then, spoke too soon. Now it works when the sd card is out, but not when it's in. Same old problem, tap on messaging and nothing. With the card out of the slot, messaging appears. What the heck is this?! Could it be something to do with where messages are stored? I'm also getting this storagecard2 problem each time I take the card in and out which is easy enough to fix but could be contributing I suppose. Any more ideas?
Edit: I repaired the storagecard2 directory issue, cleaned up all the references to storagecard2 in the registry (about 4), unticked the option to use the card to store attachments, and it seems to work. I've also re-synched and re-installed spb mobileshell. Last time it seemed to fail at that last step but this time is still working. Even after a final soft reset. I haven't reinstalled spb diary.
Has me stumped but works again now. Sorry to bore you all with this but someone may have a simple answer and the ordeal might help someone else I hope.
Based on all of these issues, I would definitely suggest re-flashing your current ROM again (not just a hard reset), and do a full format of your SD card outside of the phone. It sounds like you've got some major corruption going on...
drmc said:
Alrighty then, spoke too soon. Now it works when the sd card is out, but not when it's in. Same old problem, tap on messaging and nothing. With the card out of the slot, messaging appears. What the heck is this?! Could it be something to do with where messages are stored? I'm also getting this storagecard2 problem each time I take the card in and out which is easy enough to fix but could be contributing I suppose. Any more ideas?
Edit: I repaired the storagecard2 directory issue, cleaned up all the references to storagecard2 in the registry (about 4), unticked the option to use the card to store attachments, and it seems to work. I've also re-synched and re-installed spb mobileshell. Last time it seemed to fail at that last step but this time is still working. Even after a final soft reset. I haven't reinstalled spb diary.
Has me stumped but works again now. Sorry to bore you all with this but someone may have a simple answer and the ordeal might help someone else I hope.
Click to expand...
Click to collapse
Yes delete the storage card directory, if it gets corrupt the unit won't send or receive SMS.
Speaking from experience here
Thanks guys,
I've re-done the storage card and all is still working ok. I'm reluctant to reflash while it's working so I'll wait to see how long it keeps up.
Thanks again.
Installing it now.
http://www.pointui.com/
major fail...I just installed it and nothing happens ...i see no shortcut in programs folder nothing in the today setting....and I'm not the only one:
http://community.pointui.com/topic/nothing-happens
*update*
Not cool...I choose my device for the install and it instaleld into my strage card in \Storage Card\Programs\Home2
The app runs fine but I have to say it kinda looks like crap on my tilt...I'll roll with it for the rest of the day to see how funtional its is....but they better fix that install issue
ljinsane said:
major fail...I just installed it and nothing happens ...i see no shortcut in programs folder nothing in the today setting....and I'm not the only one:
http://community.pointui.com/topic/nothing-happens
*update*
Not cool...I choose my device for the install and it instaleld into my strage card in \Storage Card\Programs\Home2
The app runs fine but I have to say it kinda looks like crap on my tilt...I'll roll with it for the rest of the day to see how funtional its is....but they better fix that install issue
Click to expand...
Click to collapse
It works fine here. It installed to my phone storage, not my card. Went into the "Today" settings and enabled PointUI. No problems here so far.
Synssins said:
It works fine here. It installed to my phone storage, not my card. Went into the "Today" settings and enabled PointUI. No problems here so far.
Click to expand...
Click to collapse
I choose my device...and it went to my storage card...I had to run it from the apps program folder as there was no entry in the today settings...even after running the app. I'm going to reinstall and see what happens
needs to be manually started and then works fine...
I reinstalled and it looks like it did what it was supposed to do...installed into my device not storage card and the option to select it in the today setting is there. But this is a definite issue as other people have experience the same thing...check the forum link I posted earlier if you have doubts
I installed it, and uninstalled it 10 min later. It worked the way it was supposed too, but much like everything else I install on the phone, the ease of use is not there so I end up uninstalling it shortly thereafter.
TelloMan said:
I installed it, and uninstalled it 10 min later. It worked the way it was supposed too, but much like everything else I install on the phone, the ease of use is not there so I end up uninstalling it shortly thereafter.
Click to expand...
Click to collapse
I completely agree and amd close to uninstalling it myself. While it is a much improved app over the 1st version there is much to be desired in the functionality dept.
I decided to give it couple of days... so far the bast combo was m2d + standard today(with today agenda)...
awkay guys.. I am thinking the same thing. while it looks somehow promising with great potential, imho M2D is still better in it's looks/friendliness.
however I'm going to wait with final judgement for pro version, as this whole applet thing may become something big in the future. anyway - it is nicely coded, but qvga gfx needs to be redone.
I agree to all.... M2D is much more user friendly... I used pointui 1.5 up until M2d came out... PointUI 2.0 goes in the backward direction... It doesnt even stay upto par with Winterface... I understand its beta, but I dont like the way it handles stuff... I loved the way you could scroll in 1.5, man i wish entire windows wud scroll that that.. 2.0 scroll is not similar to all other scroll which ruins its originality... Too similar to other GUIs now :-/... It seems to be made more for the corporate user rather than the personal user...
Yea i installed it on my storage card at first, didn't work.
TO INSTALL:
1. Download it, of course.
2. Run the cab, install it to DEVICE
3. Go to your windows mobile settings, go to the Today options, go to the Items tab, and then uncheck all of your other today items and only leave the Pointui 2 item checked.
4. Enjoy, if possible.
i just installed it without problems on my phone storage.
i love the way you can quickly add / remove applets and the configuration via xml files for the wether / location on the world map. i'm running Athine OS 6.5 ME edition.
I was really looking forward to using this. For weeks i have checked the site in quiet anticipation of home2. After being a user of 1.51 and enjoying its features, my hopes were high for 2. However, it has failed to impress. Maybe it is just me, but where can I find battery information with home2? At least, 1.51 had a battery icon. Furthermore, my own battery icon has been removed from my title bar. There is a lack of customization in home2 that would have been nice to see. I am far from impressed by this.
Yeah a bit disappointed here too, will wait and see how it develops. It can't hold a candle to the BellUI that they did for Bell which is a shame. Also, is there any way to configure which apps it uses for mail/sms/contacts/calendar/alarm etc? I really thought they'd make those easily configurable this time.
whats up with the "select city", not all cities are there, and when i tried selecting chicago, it told me that it was in africa! i think you guys should wait a little before downloading this app, it looks great but it needs more work.
OK, my first post so be gentle.
I have MDA Vario that has been flashed with TPCElite series V11 MEGA wm6.5 23017. It also has the touchflo GUI running. Now having tried it for a week (only just purchased it a week ago) I can say that I'm not a fan of the touchflo prog. It seems to hang on occasions and I often end up selecting something I didn't want only to find the phone connecting to the net. So I have switched it off. There is a windows default one that is working fine, but I can't see a way to customise the menu so I can add what I want to it.
So my dilemma. Do I flash with a "lite" rom and add a GUI myself afterwards - this way I can uninstall it if I don't like it. Or should I just leave it deselected and install a new one? Will this have any performance/memory issues - ie is the lite rom a better way to go.
I had a Mio PDA with iLauncher on it and I liked the ability to add my own shortcuts etc.
If I should flash can anyone recommend a stable reliable rom. Also is there a better GUI? Been looking at Manila 2D v2 but I want to be able to customise the main menu and I don't want it sluggish.
One final thing. Is it possible to get the phone to ask permission before connecting via gprs rather than scurrying around for the disconnect. I've looked through the menus but can't find anything. Don't mind using it if I want it, just fed up of it dialing it by mistake -(I have sausage fingers.)
i recommend the t.i.r element v5 rom. ive been thru many roms including the tpc series that you have tried and i find that t.i.r element v5 is the best w/ smooth graphics, great gui (full landscape support etc.) i cant post a link as of now since i am new to posting on xda so please look it up and give it a shot!
Is there a CLI version of a rom for this phone or is someone just trying too sound fancy? Since when is touchflu a GUI? I am totally confused.
Do I flash with a "lite" rom and add a GUI myself afterwards
Click to expand...
Click to collapse
Uh my head is hurting make it stop.. SOMEONE REPLIED TO THIS?? awmg
If I should flash can anyone recommend a stable reliable rom. Also is there a better GUI
Click to expand...
Click to collapse
I am so confused, it's like trying to mess with a womans bra (Full Landscape support) for the first time, what do I do.. do I call her new hair doo a pair of panties? AAAHHHHHHHH
Stylez close this **** down.. REASON.... Doesn't make any sense at all..
I used the GUI version of this forum to reply.. Thanks.
hi DTBrum,
touchflo - i never liked it too, don't know which files are responsible for its running and if it could be removed, seems like it's part of needed htc drivers to me, but this will switch it off completely:
[HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings]
"EnableScroll"=dword:00000000
"EnableCube"=dword:00000000
you need a registry editor to change those values.
===
you can't replace gui, or you can theoretically but what you mean is sort of launcher, or today manager. I tried more and didn't like any, they all seems to be laggy to me.
windows in default uses today screen and start menu, it's the same way as in pc edition, there are folders with shortcuts in them for start menu
look in \windows\start menu folder. and on today screen, you can set what you want to see there in settings/today
I use start replacement called quickmenu which is a very small prg with lots of tweaks.
if you don't like those fancy launchers and controls, better you make your own rom. it's very easy with tools from xda. nearly all custom roms lite or full you'll find here have some kind of launchers and today replacement already in them and it's hard to remove or disable them.
there is a lot of different apps like iLauncher, you can install/uninstall.
no one will recommend you any custom rom here, you need to go through trying one after another because everybody's preferences differs. look in wiki.
automatic connect. no, there is no way to disable this. you can use app called 'nodata' but then you'll have to run it to enable/disable every time you want to use internet. But it solves problems in roaming.
Some programs can be set to not auto dial. and another option is, you can set a fake internet connection, make it default and then when you want to go online you'll dial the real one manually. But you may find that some programs would not want to use other then default connection.
and don't get discouraged here on forum, some people are smart here, true, but not all of us here get born that way.
Thankx for the replies.
What I found with touchflo was that there are occasions where I try to scroll from left to right and nothing happens, then all of a sudden I find it has selected something like maps or internet and the phone is trying to connect to the net. Then it starts responding normally. So as a front end user interface for me I'm not that keen on it. Also I can't see a way to remove the categories sucj as maps, and add my own. I have a registry editor and will try changing the values suggested and see if that helps. I'll do a search for the other bits recommended.
Apologies ChumleyEX, not sure if I used the correct terminology. For me a program such as touchflo is an alternative GUI that sits on top of the windows GUI. Just want to know if there are better, more reliable ones. Doesn't have to be fancy. I want to be able to customise it and for it to be quick and responsive.
Sorry I'm sure I was too harsh, I was feeling a little too good last night.
No problem ChumleyEX - no harm done.
Papo - thanks for you time and help, you cleared a few things up for me. Registry edited and touchflo now disabled.
As I said I've only had this device a week and only just found this site recently, so I'm not really up on the terminology so I'm hoping you can look past my shortcomings please. I'll get there. I'm no novice with pc's or pda's but I'm not in the same league as most people on here I admit.
My question about installing an alternative to touchflo was because some of these other programs such as ilauncher like to be installed to the device memory rather than storage card. I don't want to find I start running low on resources so I was contemplating flashing the phone with a wm6.5 lite version with all the MS bloatware removed and adding a launcher/today screen manager afterwards. At least this way if I don't like a particular one I could un-install that. I have no option to remove touchflo.
I was hoping that by describing what I was after people would recommend something that fits the bill. But for now I keep looking at the roms and reading the comments until I find one I like the look of. There is some really nice work here on this site - so tempted to give it a go. I guess we all like different things so it's a matter of personal choice really. Key for me is functionality/responsiveness. It's no good if the interface gets in the way no matter how good it looks.
Off to read some reviews of roms on here now. I'll check out t.i.r element v5 as suggested by agent1001 first.
dude, stop fretting and just try out as many ROMs as you can...and remember to search and read a LOT! it will help in the long run to build your concepts.
i have TWO more suggestions/clarifications for you:
1. you might have big fingers, but what i suspect is that you are using your device as if it has a capacitive screen...which it doesn't. the kaiser (like many htc phones) has a resistive screen. essentially, what this means is that the screen will respond best with a good amount of pressure, applied at a point. so the best suggestion i can give you that will tremendously improve your experience with the device is...use your finger NAILS! the effect is as if you are using a stylus and once you get used to it, any "GUI" will become usable.
2. what you call a "GUI" is not a GUI, technically. this is what chumleyex was alluding to. these "GUIs" run as today screen plugins. they are just that...they are "today screen plugins"...also called "home screen" in other contexts of discussion. you can have many such plugins installed on your device. you can even have many such plugins running at once on your today screen. however, some take over the today screen completely, so you can only use them exclusively. manila2d/manila3d, spb mobile shell, and quite a few others are such kinds of today screen plugins. installing multiple such plugins only takes up storage space. RUNNING multiple such plugins is like running many applications at once...which will consume memory and may slow down the phone, etc, etc.
as always, you should have read the forum rules...which clearly state that "best of" threads or "suggest me a <insert requirement here>" style threads are against the forum rules. which leads me to believe that you probably haven't read the other "stickies" and "wikis" either. start there and then you'll find yourself asking a lot less basic questions that clutter up the forum. don't be surprised if this thread is closed soon by a forum mod. cheers.
Thanks ASCIIker - screen is more responsive with more pressure. Guess I was worried about cracking it.
I did do loads of reading before posting - mainly to do with how to, hard spl, soft spl, roms, radio threads. Sorry if I missed the bit about asking for recommendations.
DTBrum said:
I don't want to find I start running low on resources so I was contemplating flashing the phone with a wm6.5 lite version with all the MS bloatware removed and adding a launcher/today screen manager afterwards. At least this way if I don't like a particular one I could un-install that.
Click to expand...
Click to collapse
I get the feeling that you think those fancy things in full custom ROMs are taking up space. they are not. and not using them, disabling them, or deleting shortcuts from start menu would do the same as uninstalling.
you've got:
flash memory - (ROM)
int. memory - think about it as HDD: depends, typicaly little over 100MB
RAM, operating memory, like on PC another 100MB: to be used by progs.
those names differs, to add confusion, some refers to int.memory as ROM
MS bloatware & fancy stuff from custom ROMs which you don't want could still rest in peace in ROM and not bothering you. you'll still have your 100MB int.mem. And as long as they are not actively running you still will have 100 RAM and no processor power used. but exactly like mentioned every plugin on today screen means it's running too. get an fdc task manager or alternative to see all processes and other stuff running. (not just tasks) You can find a way to disable nearly everything.
I have no option to remove touchflo.
Click to expand...
Click to collapse
I don't think there is any. even with ultra lite, i could be mistaken with this, but i tried hard and it looks like it's part of required htc drivers. so you only could disable it...at least! i hated it too no matter about fingers. it seems better on htc pro2 anyway.
But for now I keep looking at the roms and reading the comments until I find one I like the look of.
Click to expand...
Click to collapse
yep, the look would be the main difference i'll say.
but if you want functionality/responsiveness, than you probably better stick with using start button and today screen without unnecessary additions.
* installing on SD card means it will go much slower and (at least on my kaiser) will sometime create errors on card from crashed apps and when I dropped phone or it died w/o shutdown or when contacts on SD card get loosed. many times I even lost complete SD contents.
You have 100MB of int.mem!! it would love to be used by progs.
I suggest you to try all of available and up-to-date custom ROMs then after getting an idea of what is doing what, just mix your own rom. it's a matter of check-in what you want inside basically. and you can add your own stuff too. like programs you buy or are not in any ROM. I have over 110MB of programs fitted in ROM and still 100MB int.mem. and speed of the device and ram is not affected too, because i let only 3 - 4 apps from that running in background.
Well I've tried flashing it and had to visit the toilet as things didn't go well.
I flashed with a lite rom, plan being to leave enough free space on the device to install a nice front end/today screen/touchflo etc to the device when I settled on one I liked.
Rom flashed fine - quite like it.
Radio didn't go well. Got stuck at the dreaded tri coloured screen.
Mtty.exe didn't recover it either.
Visited toilet.
Flashed back to standard rom from manufacturer. All now back up and running.
Have changed underpants.
At least I was able to use the info on here to get it back up and running OK.
Problem was a write error flashing the suggested radio - at 99% got an error 226.
DTBrum said:
plan being to leave enough free space on the device to install
Click to expand...
Click to collapse
check my previous post.
try flashing from SD card, a lot of troubles with cable/pc/connector
format small (256MB) SD card with FAT32,
rename ruu_signed.nbh file to KAISIMG.NBH place on root of SD
hold camera button and start or reset pda
I think to be honest I'm a little paranoid about keeping the device memory free. The reason is my wife has an O2 Orbit which was running wm5. It has been updated to WM6 and she has very little free storage memory at all on the device to the point where we have struggled getting some programs installed. I know most give you the option to install to storage card or device, but some don't. Also the ones that do install on the storage card often put some files onto the device, such as help or configuration files.
I know this HTC has a lot more memory so it probably isn't an issue in reality.
I'm up to speed about the different types of memory and whether an app is consuming processing power or just storage space depending upon if it running or not. I just didn't have a chance to read your reply before I posted- wife wanted the PC back. And I was relieved just to have the phone back working.
Papo - thanks for you help. Really appreciate it.
I had my tilt for 2 years and never worried about memory.
OK, flashed the phone a couple of times yesterday and I've now found a rom I like a lot. Even the GUI - touchflo - works like a dream and with the programs that came with the rom I can even customise it how I like. It's smooth, quick and I am yet to discover a bug.
I'll give it a run for a couple of weeks and if I decide to keep this then I'll donate.
Interestingly I flashed back to stock rom from T Mobile through links I found on here. Worked without a problem, provided a 6ft+ 16stone bloke is happy with everything in pink. So I then flashed back to the standard HTC rom wm6.1 and had lots of problems. Basic things like selecting tick boxes didn't even work well.
I understand that everyone wants different things from their phones, how they look etc and that is why it is impossible to say which rom is best. But through this site, I have a customised phone that runs so smooth and quickly and looks damn smart. So at the moment I am well chuffed.
The only really difficulty I encountered was I lost all my contacts. Activesync wouldn't restore them and the backup I took was incomplete as I only backed up the sim and not the phone. D'oh. Anyway I've now sorted this out as I found all the old contacts in outlook deleted items. I restored them back to the contacts folder and synced them again and it's all now back up and running.
Off to have a play
If she lets me I may even flash the wifes O2 Orbit XDA. It's been upgraded from wm5 to wm6 and the new rom leaves very little free memory on the device itself and we do struggle at times getting some software onto it. The version of TomTom I have doesn't let you choose where to install it to, it just goes onto the device. I have manually moved it back to the SD card and made new shortcuts etc, but I feel a new rom from this site would be the way to go.
Thank you to all who helped me.
DTBrum said:
difficulty I encountered was I lost all my contacts. Activesync wouldn't restore them
Click to expand...
Click to collapse
activeSync & outlook played tricks on me too, deleting or doubling all contacts... even easier than backing up by backup program, is to copy 'RAW' database in pda before re-flashing. it's all in one file called PIM.VOL in root of phone. calendar is there as well. you can copy this to SD and upon reflashing copy back to root of pda and see what PC's outlook will have to say to it. or just keep on SD as 2nd backup.
note, the file may be locked by running programs (contacts, messages, home plugin) kill them from taskman in that case.
The version of TomTom I have doesn't let you choose where to install it to, it just goes onto the device.
Click to expand...
Click to collapse
tomtom app is two files tomtom nav.exe and data.chk, put them anywhere you like and the rest, config files, will be created by it.
but it runs really slow from SD. and taking 13MB, so again, it's best to have them in ROM.