Database Develop

Cingular Internet via Underground WM6 rom

Can anyone get their cingular internet (edge) to work?

yea.. i did. you just have to extract the files from the Cingular EXT Rom. It includes a CAB to enable Edge and the Edge icon.
*In the attached EXT ROM, Signed_Edge_Icon is the Icon itself, and EONs is the cab that actually enables Edge. Install EONs first then the icon.
~Stefanelli~

Thank You !!!!!

Okay, I installed both like you said and it still does the same thing. When I click on IE, it says it can not connect with current connection settings. To change your settings, tap settings.
Is there a setting I still need to change? How do I access the edge icon you were talking about that.

Have you tried running this cab file?
peter2oo2 said:
Can anyone get their cingular internet (edge) to work?
Click to expand...
Click to collapse

am I supposed to do something after I install the cab file or is it supposed to work automatically?

You have to make sure that you have the correct settings in!
Go to Connections, then to advanced. Tap 'Select Networks'. Create a new connection profile, name it MEdia Net.
Then tap Modem and tap...
Create New
(name it Cingular)
Enter a name for the connection. From the "Select a modem" drop-down, select Cellular Line (GPRS).
Tap Next.
In the "Access point name" field enter wap.cingular.
Tap Next.
Verify the following profile settings, then tap Advanced:
Username: [email protected]
Password: CINGULAR1
Domain: Blank
Verify the following settings and tap Ok.
Use server assigned IP address: Selected
Use specific IP address: Unselected
Use software compression: Unchecked
Use IP header compression: Checked
Tap Finish.
Tap Ok.
Give that a try.

Just so you know... Those settings are for Cingular users... not AT&T... so if you are AT&T tell me and I'll give you settings for that... but what you have said tells me you are Cingular. Hope I've helped.

I am cingular.
okay, when i attempt to connect to the internet, it says the answering modem has disconnected. to check your connection settings, go to settings...bla bla bla.
Is the password "CINGULAR1" was the 1 and caps typo?

no it should be caps and there should be a 1 at the end.. the settings i gave you are directly off the cingular support site.. so they should work..
-Stefanelli-

Oh good GOD, I was the one with the typo. I was typing WPA (like the encryption) instead of WAP. Thanks for the help. I'd buy you a beer if I could

If you simply run the cab that golfernutnflorida posted all those GPRS settings are there.
I'm on Cingular and I'll be damned if I had to put those settings in by hand the numerous times, sometimes daily, that I flash a new experimental ROM!
In other words, I keep that exact cab on my SC.

Exactly! The less I have to put in under a Rom Flashing, the better.
Dr Puttingham said:
If you simply run the cab that golfernutnflorida posted all those GPRS settings are there.
I'm on Cingular and I'll be damned if I had to put those settings in by hand the numerous times, sometimes daily, that I flash a new experimental ROM!
In other words, I keep that exact cab on my SC.
Click to expand...
Click to collapse

Trying to get Vodaphone Live to work on HTC branded TytnII

Hi guys - need some help.
Been following the guide on how to get Vodaphone Live to work on the HTC branded TytnII.
Done the registry editor changes to it now appears to be an Nokia N95... but every time I try to copy the Browsers.dll file across to the windows directory I get a write permissions error.
Any ideas?
Cheers
Tony

Try using Resco Explorer or Total Commander to copy "browser.dll" to \Windows...
I think the built-in file explorer will give you an error, but those two should allow you to copy it over.

kaiserchief said:
Try using Resco Explorer or Total Commander to copy "browser.dll" to \Windows...
I think the built-in file explorer will give you an error, but those two should allow you to copy it over.
Click to expand...
Click to collapse
Thanks you're a Star... Resco explorer worked like a charm...

Vodaphone Live and HTC TytnII.
Hi guys - need some help.
where can i find the guide
to get Vodaphone Live to work on the HTC TytnII.
i am looking for
the registry editor changes needed to work'

nikosroy said:
Hi guys - need some help.
where can i find the guide
to get Vodaphone Live to work on the HTC TytnII.
i am looking for
the registry editor changes needed to work'
Click to expand...
Click to collapse
Hiya this is the guide I used:
http://www.modaco.com/Vodafone-Live-Settings-t259142.html

I tried the settings in the thread Wise1 gave but it didn't work. Has anyone got vodafone live to work on the TyTnII?

Use the cab in here...
It uses the same browser.dll and reg settings as mentioned in the guide, but only takes two seconds (and a soft reset).
Oh, and always remember that you have to connect to the internet via the *WAP* settings before you can get on to Vodafone Live! - you'll get an error if you're connected via the "Internet" settings.
Enjoy!

It Worked!!!!
Thanks Sub69 it worked. I had spent hours trying to get Mobile TV.
Just thought I'd add one note though for those people that download the cab and then expend the Internet browser to work.
Once you have installed the cab go to START, Settings, Connections, then click on Connections icon. Click on Advanced and Select Networks. On programs that automatically connect to the Internet, select Contract WAP from the dropdown menu.
Next goto Internet Exployer and type http://live.vodafone.net. It should then work.
p.s. turn off WiFi as this will stop internet streaming on vodafone live

Thank you for this...
This worked perfectly for me, although I had to enter wsp://live.vodafone.com before it loaded the vodafone live! homepage (http:// at the start didn't work).
Amazing isn't it how Vodafone happily sell Windows Mobile devices but don't support them with Vodafone live and Pocket IE!

Personally, I use: http://live.vodafone.co.uk but as long as it all works, that's the main thing!
And yes, you must be connected via the *WAP* settings otherwise you get a "service is not responding at this time" error.
Bit of a pain that - I've tried all sorts of fiddling with the exception list etc. and I just can't get it to switch connection settings automatically when navigating to the Vodafone pages.

app to devellop...
If a dev guys could write a little apps with two big button to switch to :
* Vodafone Live wap
* Defaut internet
it's would be nice if you can setup within the applic 2 network config something like:
Button1(I):
Internet connect with : ....
Work connect wit : ....
Button 2(WAP):
Internet connect with : ....
Work connect wit : ....
and an option to start PIE to another web page ... with button 2...

Still not working...even with the .cab
Thanks guys...I'm another HTC TYTN ii user and I got all excited reading this thinking I'd finally found the fix (I hate Vodafone for selling me the Vodafonelive/MobileTV package and then not supporting me!!). I've loaded the .cab and followed the instructions for the reset. I'm also using WAP to now try and access the vodafone live sites...but no joy!!! :-( The following errors occur on each respective 'potential' Vodafone live page.
http://live.vodafone.co.uk - Gives me the error message: Bad Gateway - The proxy server received an invalid response from an upstream server. Additionally, a 502 Bad gateway error was encountered while trying to use an ErrorDocument to handle the request.
http://live.vodafone.com - This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later.
http://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.com This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. check the connection and try again later.
wsp://live.vodafone.co.uk
Can someone please advise if I need to do anything else...or can you think of anything else that I can try???
By the way...I do at least get the EXCEPTIONS working out in Connections...By inputting the above sites into EXCEPTIONS, they do connect over WAP rather than IS(3G).
Pleeeeeease help! Cheers.

The cause is just your tricks to use exception...! Don't try to use it, even if it connect right...do a manual connect you will see the difference

I got those sorts of error messages when I was trying to work out how to use the exception list too. Very long "loading" times, followed by IE timeout errors.
Should work fine if you set your connections so that the "Programs that automatically connect to the Internet" are using the "Contract WAP" settings...

Same here?!
Deepdivedog1 said:
Thanks guys...I'm another HTC TYTN ii user and I got all excited reading this thinking I'd finally found the fix (I hate Vodafone for selling me the Vodafonelive/MobileTV package and then not supporting me!!). I've loaded the .cab and followed the instructions for the reset. I'm also using WAP to now try and access the vodafone live sites...but no joy!!! :-( The following errors occur on each respective 'potential' Vodafone live page.
http://live.vodafone.co.uk - Gives me the error message: Bad Gateway - The proxy server received an invalid response from an upstream server. Additionally, a 502 Bad gateway error was encountered while trying to use an ErrorDocument to handle the request.
http://live.vodafone.com - This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later.
http://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.com This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. check the connection and try again later.
wsp://live.vodafone.co.uk
Can someone please advise if I need to do anything else...or can you think of anything else that I can try???
By the way...I do at least get the EXCEPTIONS working out in Connections...By inputting the above sites into EXCEPTIONS, they do connect over WAP rather than IS(3G).
Pleeeeeease help! Cheers.
Click to expand...
Click to collapse
Same here?! Kaiser (Vario III) with Dutty´s Kaiser Final 2 (TouchFlo). Running fine.
What happened:
Try to establish internet connection. "wap.vodafone.de" (without Proxy)
- Vodafone Mail works fine (POP)
- IE (only http://www.vodafone.de) works fine
- Every other page (also wsp://live.vodafone.de) The page cannot be found. Check the name and try again.
Add Proxy 139.007.029.001 like it is written in some "Threads":
- Vodafone Mail --> did not work any longer. Sync error (Could not establish connection)
- No IE connection is possible.
Any idea?
Thanks. Bye.

Reversing the Vodafone cab file
Hi Sub69
I have been able to use Vodafone Live TV fine on my TyTn II for sometime but recently I wanted to look on a site that won't work as it said that my phone had been detected as a Symbian S60 unit and wanted me to download a .sis file which obviously won't work on the TyTn II. Have you got a cab file that does the reverse of the vodafone Live cab file and reverts the TyTn back to a WM6 device as far as some programs are concerned. I will then be able to toggle between the 2 as and when I need to.
Thanks

How to choose connection access point for youtube application?

I have following problem:
Normally i should use wap.vodafone.de-connection to access internet-that's the only one listed in Start-Settings-Connection-Connections. But apparently my youtube-application uses web.vodafone.de connection to access internet - i know that because i received an sms from vodafone that i should use the right connection access point(wap.vodafone.de not web.vodafone.de). So the question is - how to change it? I havent' found any similar threads in this forum or connection-settings in youtube-application.

Change connection settings, or remove the web apn.

Riel said:
Change connection settings, or remove the web apn.
Click to expand...
Click to collapse
Change connection settings where?? In Start->Settings->Connections->Connections i have only one(the right one).

Hmm there usually are some there.
Settings-connections-connections and the Advanced tab.
In select network, you find a list, select the ones to edit/remove.
When editing you get in the middle 'modem' tab. ONe tab on the left is general, you have button 'remove settings' there.
You can also edit them to use the other apn.
It's a bit unlogical, I really never understood how this really works

Yehh! Thanks! Pretty unlogical but now i have a clue.

How To : Update internet settings pre loaded

Hi,
I've got ROM 1.38WWE with the current Telstra pre loaded software on the device. Everything works fine, included autoconfig and some other tools posted on here, (many thanks for them!)
What I can't do is edit the internet connection setting, the device says "this connection is pre-configured. It cannot be modified"
The reason I need to modify it, is to add a setting that will setup my direct push technology, so I can wirelessly sync with an exchange server. On the imate, once you add this setting everything works fine but here I cannot do it?
Any suggestions?

You will need to install a registry editing software, I used PHM RegEdit.
Once installed use the find function on "Telstra Internet"
and set the ReadOnly value from 1 to 0
It will be somewhere in :
HKEY Local Machine > COMM > ConnMgr > Providers > Random String eg. {7C4B7xxx
> Connections > Telstra Internet
Edit:
What setting did you need to change? i didn't have to change anything for my setup of exchange synchronisation on my Telstra TD.
I did notice however that I couldn't access pop3 and live messenger on the default proxy, having instead to change it to 10.1.1.181 - this allowing telstra WAP access/internet browsing/pop3/live messenger/exchange, but the Touchflo weather app has been "intermittently" working since... still nutting that one out.

big_chunuts said:
Hi,
Any suggestions?
Click to expand...
Click to collapse
Honestly you best bet is to drop the Telstra Rom and load Duttys rom.
You wont look back....

MDA Compact IV - O2 GPRS Internet

I have an unlocked T-mobile MDA Compact Iv (aka Touch Diamond) which is now on O2 with a web bolt on. I've configured it as per the instructions from O2 but I can not get the internet to work.
If I select IE, input a web address it says 'cannot connect'.
It does come set up with T-Mobile Web N Walk and when I go into connection settings it says T-Mobile Internet 'this connection is pre-configured and can not be modified' but it does allow me to add a new modem connection (which is what the O2 instructions say to do).
I'm guessing its trying to use the pre-configured T-mobile settings. How can I get it to use the new O2 connection I've just set up?

try this (see attached cab) it from my o2 ignito!
there is a cab on the forums somewhere ! i cant rememer the exact name its something like "setup operator" or "operator config" just do a search
oh yeah im assuming yopur in the uK with that cab

You may wish to look at the link in my signature if you're using the HSDPA (3G) connection from o2 UK.

idrisito said:
try this (see attached cab) it from my o2 ignito!
there is a cab on the forums somewhere ! i cant rememer the exact name its something like "setup operator" or "operator config" just do a search
oh yeah im assuming yopur in the uK with that cab
Click to expand...
Click to collapse
Thanks. Can I install that straight on to my phone. Its still running the original T-mobile themed ROM. Should I back anything up first or will it just install a new app (which app is it).
I've found this on the forum -
Advanced Configuration Tool 2.1.0.0 [cab, 396 KB]
http://htc-diamond.sosref.com/downlo...ol_2.1.0.0.cab
Was this the one you were refering to.

dont bother with that cab just tried it on mine ! installs but doesnt work
the other point, No im not refering to advance config! i wll try to look for it again! in the meantime may be some else can find it for you

Managed to get it working.
If you go into Settings-> Connections->Connections
It say 'T-Mobile Internet. This connection is pre-configured and can not be modified'. You then have 'My Work Network' which is were I added the O2 settings but this wasn't working.
If you click the Advanced Tab and then 'Select Networks' the first question is 'Programs that automatically connect to the internet should connect using -' and there is the choice of T-Mobile Internet (the default) and my Work Network. By changing this to 'My Work Network' it will pick up the O2 connection I have added under Work Network getting round the pre-configured T-Mobile settings.