Database Develop

Can't Tap Screen

I've searched and could not find an answer. So I'll just start a new thread.
No matter what radio I use, no matter what ROM I flash, I cannot get my screen to respond to taps.
It was responding to manual buttons but no touch. I flashed to a new ROM hoping that would fix it, but now I can't even past the calibration screen...
This all just happened suddenly too. I have been using an iphone for the past couple of months so I have not been too concerned. However I wanted to use my kaisar as a modem at an offsite sales event but it's still the same....
Probly been asked a few times, but I took the plunge away....
Flame or answer away....

Just flash ur shipped ROM & see if it can back to normal again. If not, just return for warranty or repair.

have you updated your HardSPL?
if you have spl1.0 with the wm6.1 installed, these problems are common.

hang.tuah said:
Just flash ur shipped ROM & see if it can back to normal again. If not, just return for warranty or repair.
Click to expand...
Click to collapse
That may work. But I'd rather not downgrade to 6.0 if that is not the problem. Plus I have no valid warranty. ATT Tilt is from the United States and I live in Canada...
ccaparli said:
have you updated your HardSPL?
if you have spl1.0 with the wm6.1 installed, these problems are common.
Click to expand...
Click to collapse
I have tried 2-3 Hard SPL's.
I suspect that it has something to do with the Hyperdragon 3 Diamond ROM. All my problems started when I flashed that paticular ROM.
I will try downgrading to 6.0 and see if that does the trick. I somehow doubt it though. I think that this may need another, trickier remedy, ie: unbricking a bricked PPC.
I was sort hoping that this was a more common problem and advice would be more readily available...

So I downgraded to the original ROM, but still the same problem. Perhaps if I also downgrade the SPL. Does anyone have this file?
Btw, though I am not a developer or anything I have been flashing ROM's for awhile.
This problem just came out of nowhere...

bump...............

This should help:
http://forum.xda-developers.com/showthread.php?t=334679
Also, make sure you run JumpSPL/SSPL-KAIS in order to successfully change the SPL.

KMFM$ said:
This should help:
http://forum.xda-developers.com/showthread.php?t=334679
Also, make sure you run JumpSPL/SSPL-KAIS in order to successfully change the SPL.
Click to expand...
Click to collapse
Ya, I forgot about that thread. I haven't used that since I upgraded my spl to Hard3.28. I can understand why I would get problems with the RESTORED STOCK ROM that I flashed my device wouldn't work with the latest Hard SPL, but why would this occur with a ROM it was supposed to work with.
This wasn't something that happened after I flashed, it just happened out of nowhere... They key to fixing this understanding WHY. it may or may not be the SPL...

last bump...

jzalapski said:
last bump...
Click to expand...
Click to collapse
After you flash a rom or hard reset, are you able to get past the screen calibration?

Look here It will not fix the problem, but at least it will let you to bypass the "aligment screen"

liquidfork said:
After you flash a rom or hard reset, are you able to get past the screen calibration?
Click to expand...
Click to collapse
No. I figured the problem had something to do with the SW, so I just flashed figuring that would fix it, but now it's basically useless (not like I'm using it right now anyway, but)...

timurg said:
Look here It will not fix the problem, but at least it will let you to bypass the "aligment screen"
Click to expand...
Click to collapse
Thank you. I will try that when I have time later. I'm not sure what it is yet, but I'm sure it will work...

jzalapski said:
Thank you. I will try that when I have time later. I'm not sure what it is yet, but I'm sure it will work...
Click to expand...
Click to collapse
hehe, just create an empty file "welcome.not" in the root of SD card and ... PROFIT!

timurg said:
hehe, just create an empty file "welcome.not" in the root of SD card and ... PROFIT!
Click to expand...
Click to collapse
step 1: Create File on SD Card
step 2: ...
step 3: Profit

I had a similar problem on my trinity. It was an hardware problem, a spoiled thin strip that is between the LCD and front cover. As someone told me that
send it to warranty would take a long time to get it back I replaced myself the strip and now is working...

It's probably a hardware issue. You will have to replace your LCD+Touchscreen and if that doesn't work, you'll have to replace the flex that connects the LCD with the motherboard itself.
I fixed a TILT with that problem. I ended up buyina a new LCD when the problem was caused by the flex
PS, LCD screen is way cheaper than the flex.

Hey. So it looks like I did buy a replacement warranty. So I took it to my guy and he said that he would just replace it. He asked if I wanted the same one or if I wanted to pay the difference and get a new one....
I paid an extra $250 and got a diamond...
Problem Solved.... See you in the Diamond Section...

had same problem - which i solved by dissasembling and putting few paper pieces under the screen to make a good fit of screen inside the housing - and it helped - touhscreen works fine

maxxis said:
had same problem - which i solved by dissasembling and putting few paper pieces under the screen to make a good fit of screen inside the housing - and it helped - touhscreen works fine
Click to expand...
Click to collapse
I had a similar problem with a Wizard and it turned out to be a bit of dirt that was stuck under the screen on one corner, resulting in constant contact that prevented the device from registering my taps. I removed the screen and cleaned it thoroughly to fix.
Also try "rubbing" the screen in each direction with both thumbs to see if you can slide the screen around and dislodge any dirt from the edges. The screen will move around slightly under the case without damaging the device.

Help the phone get stuck

hey guys i need help i nstalled soem software that called vzo from some one that put this in the forum,
well it suppose to do video calls or someting like that.
but it dont do noting
its just get my phone to get stuck all the time
.
i cant do noting after soft reset he get stuck what can i do?
i cant move with tuch screen and noting,.

hard reset?

i didnt tryed should i do it ?

if there is no way how to uninstall the application and u cant do anything else with the phone then the hardreset is the only way. But be aware that by hardreseting u loose all your data on the phone(not on sd).

English classes?

ok
well now is ok i uninstalled the program no need for hard reset thanks god
thank you mate

ChumleyEX said:
English classes?
Click to expand...
Click to collapse
????

Mikulec said:
????
Click to expand...
Click to collapse
I'm refering to his strange way of typing.

ChumleyEX said:
I'm refering to his strange way of typing.
Click to expand...
Click to collapse
Oh, I thought it was message for me. I was confused a little bit, cause I think my english is not so bad.

Help me please, dead tytn2 :(

Hello guys, i really need your help!
My phone is so strange now, i have been using Ultimate-X.V9 -21054, but in last days, my phone has gone to white screen some times when i press to screen up sometimes everything is fine, but others not and my phone sometimes dont respond to my touch, and sometimes is a bit slow
Now i have flashed to RUU_Kaiser_HTC_PTG_3.28.410.0_radio_sign_25.83.40.02_1.65.17.56_Ship, during the upgrade my phone stay on tree colors, but on computer appeared the status bar! and everythime i turn on my phone now is like 90% is allways white :O i have open my phone, and reconected all again, but the problem still there! im using 3.34 hard spl!
Please someone help meee... i really love my tytn2 is there any way to put this fine? its hard spl problem?
Please help me

Please help meee My phone now is more slow than normal :/

That happened to me a while back, I took it apart several times and checked connections etc. but that did not fix it. I ended up buying a new LCD off of ebay which fixed it perfectly. So, I would suggest doing that (I bought one for 15USD used).

But this to me seems to be a problem on the main board, because the phone sometimes gets really slows And sometimes that white problem appears and others not, like 90% when i need to use my phone

Flash Stock ROM?
Did you flash if back to a OEM ROM? Did it work OK if you left it on the OEM ROM? I have used "Kaiser_HTC_ASIA_HK_WWE_3.34.721.2" as a OEM to upgrade from on many phones that I had upgrade issues with.

i think RUU_Kaiser_HTC_PTG_3.28.410.0_radio_sign_25.83.40. 02_1.65.17.56_Ship is an OEM rom isnt? :x

P4k1t0 said:
Hello guys, i really need your help!
My phone is so strange now, i have been using Ultimate-X.V9 -21054, but in last days, my phone has gone to white screen some times when i press to screen up sometimes everything is fine, but others not and my phone sometimes dont respond to my touch, and sometimes is a bit slow
Now i have flashed to RUU_Kaiser_HTC_PTG_3.28.410.0_radio_sign_25.83.40.02_1.65.17.56_Ship, during the upgrade my phone stay on tree colors, but on computer appeared the status bar! and everythime i turn on my phone now is like 90% is allways white :O i have open my phone, and reconected all again, but the problem still there! im using 3.34 hard spl!
Please someone help meee... i really love my tytn2 is there any way to put this fine? its hard spl problem?
Please help me
Click to expand...
Click to collapse
did you ask in the proper thread before starting a new one?

msd24200 said:
did you ask in the proper thread before starting a new one?
Click to expand...
Click to collapse
Lolol? and what is the proper thread? --' dont you see this is any rooms i have tried?

P4k1t0 said:
Lolol? and what is the proper thread? --' dont you see this is any rooms i have tried?
Click to expand...
Click to collapse
noticed when searching all your post that you went straight to starting a new thread for this instead of asking in on of the flashing threads. http://forum.xda-developers.com/showthread.php?t=533976

Dude, and in what that link will help in my problem? if search on it, you will find the solution to my problem? the answer is NO, maybe you should read a bit better!

P4k1t0 said:
Dude, and in what that link will help in my problem? if search on it, you will find the solution to my problem? the answer is NO, maybe you should read a bit better!
Click to expand...
Click to collapse
dude the answer is yes go ask in the flashing for newbs thread, or one of the other great links in the thread i posted. maybe you should read better the rules about starting new threads because you are having a flash related problem that needs to be asked in a thread already setup to deal with flash related matters instead of starting a new thread.
have you tried pushing the hard buttons to get into bootloader? do you think MTTY may help your current problem?

msd24200 said:
dude the answer is yes go ask in the flashing for newbs thread, or one of the other great links in the thread i posted. maybe you should read better the rules about starting new threads because you are having a flash related problem that needs to be asked in a thread already setup to deal with flash related matters instead of starting a new thread.
have you tried pushing the hard buttons to get into bootloader? do you think MTTY may help your current problem?
Click to expand...
Click to collapse
Dude i can enter on bootloader yes, can i use my phone yes! but the problem is that sometimes (i mean, like all the time) the screen stay white when i turn it on, and the phone stays slow!!!!

jsgjm said:
Did you flash if back to a OEM ROM? Did it work OK if you left it on the OEM ROM? I have used "Kaiser_HTC_ASIA_HK_WWE_3.34.721.2" as a OEM to upgrade from on many phones that I had upgrade issues with.
Click to expand...
Click to collapse
i have tried that rom too, but nothing the problem is here

It sounds like your Screen is on the way out. I would replace it.
No lets play nice. Or Ill break out the fish heads lol

zelendel said:
It sounds like your Screen is on the way out. I would replace it.
No lets play nice. Or Ill break out the fish heads lol
Click to expand...
Click to collapse
Well, if is about the screen, i can say im safe :x
But one thing on my mind, the white screen i could say to change the screen to one new, but the problem is the kaiser stay a bit slow, and sometimes it dont respond to what i want!
With that stay thinking that the problem is about the mainboard or something like that :s but i hope the problem is the screen, i will buy a new on ebay

The ribbon cable for the digitizer (touch screen) attaches to the LCD, and then both signals feed through the same cable into the D-pad board, so its possible that there is a bad connection somewhere in the LCD/Digitizer assembly that causes it to not sense your inputs, even when the LCD itself is working. Mine just failed completely to a white screen and did not come back. It could be something besides the LCD..try flashing a new HardSPL and/or a different ROM, but if I had to bet, I would bet on the LCD.

zelendel said:
No lets play nice. Or Ill break out the fish heads lol
Click to expand...
Click to collapse
Thankyou made me chuckle

P4k1t0, I know you're frustrated that you phone doesnt work, but do not get uppity at the other forum posters. If you sound off against msd24200 and a mod sees it, its likely to lock your topic.

i had the same situation two weeks back after i flash with my own cooked rom.
what i did is flash the stock rom through SD/storage card and everything is fine.
you already try this method ? you can search on how to flash from SD/storage card

to flash by sd card? ok ok i will try it right now to see

Xperia won't boot

I got my cousins Xperia.
When I start the phone, it shows the green SE logo,
And after that I get a blank (backlight on) screen.
I do not see any Radio rom etc info...
Think the bootloaders is broken or whatso ever.
I'm a pro, so plz stfu with ur flash spl etc. etc....
Bootloader won't work,
Hard resetting using the hw keys did work, but after booting again the screen became blank....
It had one of Itjes WM6.1 roms on it...
Mayb time bomb or what so ever, but I don't know why I can't get into bootloader while HR does work....

so you can't flash a stock-rom via microsd-method either?

What happens when you try to get to the boot loader? Did he try to flash a ROM? How did this problem start?

xmoo said:
I'm a pro, so plz stfu with ur flash spl etc. etc....
Click to expand...
Click to collapse
I lol'd .
The poster above me asks a valid question. How did this start? Did he do something, or the phone broke on its own?

orelsi said:
I lol'd .
The poster above me asks a valid question. How did this start? Did he do something, or the phone broke on its own?
Click to expand...
Click to collapse
Well the phone has some falling on the ground dmg.
This also happend when it felt down, he said the phone was acting weird, I soft-resetted the phone and this is what it does.
When I do volume down + Power, it just starts....
When I do softkeys+volumedown + power it does show me the HR information.
Tried HR, the phone restarts and then shows SE logo and after that goed blank (without showing radio, rom info etc...)

It should be hardware damage then. Nothing else fits. Anyway, if none of the hard reset/flashing methods work, there is nothing else to do, but send it for repairs .

orelsi said:
It should be hardware damage then. Nothing else fits. Anyway, if none of the hard reset/flashing methods work, there is nothing else to do, but send it for repairs .
Click to expand...
Click to collapse
You think it will be accepted, with some visible things that it has been dropped a couple of times???

xmoo said:
You think it will be accepted, with some visible things that it has been dropped a couple of times???
Click to expand...
Click to collapse
Nah.. He'll have to pay for the repair.

orelsi said:
Nah.. He'll have to pay for the repair.
Click to expand...
Click to collapse
Well that's not worth it anymore, it's going for sale.
Admin lock this thread, and thx all for support.

Insanity! there's got to be a solution to this, the exact same thing happened with my X1 but I swear to the love of god I NEVER even dropped the thing!

Guess what, it's fixed ^^
All I needed to do was download UpdateService for X1
I reinstalled all the software (it requires you to go to the tri-colored screen) and it works perfectly, yet again
hope this might be useful for someone

W 6.5 Roms: Keyboard Problem

Hi guys, i'm using on my x1 windows mobile 6.5 rom since first beta. I have tried alla kind of rom. As far as i know i have always had a problem that create me some trouble. The x1 hardware keyboard seems laggy and very slow. Also FN key take a lot of pressures to activate. Someone else is having the same problem? Just to know if it's mine broken. I don't want to go back to 6.1 to try.
Thanks
Luca

l0rdsheva said:
Hi guys, i'm using on my x1 windows mobile 6.5 rom since first beta. I have tried alla kind of rom. As far as i know i have always had a problem that create me some trouble. The x1 hardware keyboard seems laggy and very slow. Also FN key take a lot of pressures to activate. Someone else is having the same problem? Just to know if it's mine broken. I don't want to go back to 6.1 to try.
Thanks
Luca
Click to expand...
Click to collapse
if U want to have helps, U shuold tell us what's rom are U using or U want to use, so people, who have had experiences with that ROM will tell U how...
Goodluck

I've had a similar issue to this too since using the 6.5 roms, also along with the lag it double inputs the character selected sometimes. If anyone knows a fix fort his would be greatly appreciated.
Thanks

Is it laggy and slow in every program? For me it works very well. Only thing is my m-key is kinda broken, not a software issue i figure though.

zannyboy said:
I've had a similar issue to this too since using the 6.5 roms, also along with the lag it double inputs the character selected sometimes. If anyone knows a fix fort his would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
That's how my m-key is broken, one in ten times it types two Ms on one press. But it isn't like that on any other character.

kanchigo said:
if U want to have helps, U shuold tell us what's rom are U using or U want to use, so people, who have had experiences with that ROM will tell U how...
Goodluck
Click to expand...
Click to collapse
it's not located in a specific rom... every 6.5 rom create the problem.
@jablko yes, every program...

zannyboy said:
I've had a similar issue to this too since using the 6.5 roms, also along with the lag it double inputs the character selected sometimes. If anyone knows a fix fort his would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
exactly the same to me.

l0rdsheva said:
exactly the same to me.
Click to expand...
Click to collapse
same here, altough I had the same problem at my original WM 6.1

Same issue
l0rdsheva said:
Hi guys, i'm using on my x1 windows mobile 6.5 rom since first beta. I have tried alla kind of rom. As far as i know i have always had a problem that create me some trouble. The x1 hardware keyboard seems laggy and very slow. Also FN key take a lot of pressures to activate. Someone else is having the same problem? Just to know if it's mine broken. I don't want to go back to 6.1 to try.
Thanks
Luca
Click to expand...
Click to collapse
I have experienced same issues like you did. The Fn key works only when I put lot of pressure on it (didn't succeed to determine which is the most suitable position) so, I've been forced to find other alternatives (soft keyboards). But, what's important is to find out if this is a hardware problem or is simply related to the new ROM installments which I play with...
Any opinion/suggestion is more then welcome...
Thanks

It's not a wm 6.5 related problem... there're tons of guys having this problem, and soon they're going to increase, cause it seems to get worse with time...
my keyboard has reached an unusable state, and the left half of the keyboard type twice or nothing.
The first thing you can try is to longer the time for input replication... if it doesn't work, then send it to SE, and hope to receive it back in a little time
I'm waiting to find a good alternative to X1, then send it to assistance, and when it comes back sell it... never buying SE products anymore
searching with google get many results... this is the first:
http://forum.xda-developers.com/showthread.php?t=489331

oh let me tell you something real that is happening.
1.keyboard is crap if u dont use the buttons daily ,you will have this problem(i have it too)
2. same as my camera button( i press half way to auto focus and then press it fully to take a picture. but now it auto focus and when i press fully,the camera will auto focus again and shoot the pictures )
i dunno what is wrong with X1 ,but htc has make a bull**** things for SE.(happy that SE decided to leave them).

ok so seem to be an hardware problem; i'll dismount mine x1 to see if there's dust or something else under the keyboard.

l0rdsheva said:
ok so seem to be an hardware problem; i'll dismount mine x1 to see if there's dust or something else under the keyboard.
Click to expand...
Click to collapse
Now that's hardcore!

Jablko said:
Now that's hardcore!
Click to expand...
Click to collapse
no problem, it's already out of warranty and if it goes wrong is time to buy another device!

crava said:
It's not a wm 6.5 related problem... there're tons of guys having this problem, and soon they're going to increase, cause it seems to get worse with time...
my keyboard has reached an unusable state, and the left half of the keyboard type twice or nothing.
The first thing you can try is to longer the time for input replication... if it doesn't work, then send it to SE, and hope to receive it back in a little time
I'm waiting to find a good alternative to X1, then send it to assistance, and when it comes back sell it... never buying SE products anymore
searching with google get many results... this is the first:
http://forum.xda-developers.com/showthread.php?t=489331
Click to expand...
Click to collapse
I reached to the same conclusion like you did. Seems like most of the SE X1 keyboards have problems, as well like the battery life (btw, last night, in stand-by mode, my X1 battery drained out completely without having any process/program running)...
Speaking about SE X1 in general, yes could be taken as a kind of failure but we don't have to forget is made by HTC. So, they could be blamed as well for this lack of success!
Or maybe there was also a sabotage around, who knows?

time to get X2