WM6.1 & Internet Sharing (on a Diamond) - Touch Diamond, MDA Compact IV General

This is probably a very specific issue that I'm experiencing but hopefully someone out there can help me.
I recently got an HTC Touch Diamond, running WM6.1. I use Internet Sharing on the phone and then connect it to my PC via a USB cable. I can then browse the web from my PC. If I now connect to my office VPN, it seems that the connection times out and / or is very slow. I can't even browse to other PC's on the network via the VPN connection as it times out. But I can ping the PC's so I know I'm definatly on the network.
Now I know what everyone is thinking... our VPN might be screwy. But if I use someone else in the office's phone (running WM6.0) I can connect and there is no problem whatsoever. The only difference is that he is on a different service provider than me (and of course a different phone).
I used to have a SE M600i before this phone and it worked perfectly on that (same service provider as now).
Has anyone experienced anything simular? Or have any ideas what I could check?

I've played around abit and found the following: When I take my SIM card and put it into another HTC running WM6.0 (can't remember the model) it works perfectly and I can browse our intranet sites over the VPN. So the problem is definatly limited to my phone.
I also used Internet Sharing on the other phone and then established the VPN connection from my laptop. I didn't change any of the settings so it is 100% the same on both phones as download from the service provider upon insertion of the SIM card.
On my phone when I'm connected to the VPN I can browse the network shares and download email, but as soon as I try and browse our intranet websites or try to connect to any database (using TOAD etc.) it doesn't seem to be able to retrieve data. Almost like the phone is not able to handle large amounts of data coming through... (i'm just guessing here)
Anyone know of any setting somewhere on the phone that could cause this to happen?

Finally got this working!!
I'm now using WMWiFiRouter to use my phone as a WiFi router and then connect to the internet from my pc. If I then connect to the VPN from my PC everything works fine.
I'm not sure if WMWiFiRouter implements Internet Connection Sharing differently than the normal ICS app on the phone, but it seems to work and it's pretty fast.
Can't believe it took two months - with absolutely no else seeming to have this issue - but I'm glad it's over now!!

hschutte said:
Can't believe it took two months - with absolutely no else seeming to have this issue - but I'm glad it's over now!!
Click to expand...
Click to collapse
i do. i cant even connect to the vpn, and using wmwifirouter the wifi button in comm manager is always switching to on.. even in flight mode !
so you're not alone in this one...

Related

SlingPlayer problems?

Hi all, I have a weird problem.
I have a tilt and am using the HTC rom, I connect to wifi in my apartment and 3G or HSDPA when I leave the apartment.
When I'm connected through wifi, my Slingplayer works flawlessly, finds my slingbox, and plays the video. When I try to connect outside using 3G/HSDPA, I get "Cannot connect with current connection settings"
I know the Slingbox is working correctly because I can connect to it through a desktop PC without a problem, and I know that the 3G works fine on my tilt because I have no problem loading websites, using mundi, etc.
Any ideas? I've seen a couple other posts on other forums with the same problem but there were no responses on them.
Thanks!
Can you connect to anything else when on 3G?
Try your proxy settings
Did you change the default ports on the SlingBox config?
Are those ports (default or modified) open from the outside of your firewall/router?
If you have the ability to monitor inbound connections try monitoring while you connect through 3G and see if your device attempts on the correct port and that it is NATed to the correct IP and port.
Raptor
I had exactly the same problem with my Belkin router. You need to set up a port on your router in order for it to work. I know on mine it involved setting up a virtual server.
I am using the TyTN II and I am having the same exact problems. I think AT&T killed access to slingbox somehow. I can surf the internet just fine, and then as soon as I start the slingplayer, my connection gets lost and my phone says "cannot sonnect with current connection settings." Any help would be appreciated, especially with the World Series coming up this week.
cjf2014 said:
I know the Slingbox is working correctly because I can connect to it through a desktop PC without a problem
Click to expand...
Click to collapse
Possibly a silly point but can you definitely connect over the internet to it? Or just over your LAN?
There's a wizard that enables the port forwarding for you - (called Remote Viewing or something?) should be with the software for the slingbox.
Could be that your desktop is just going direct over the LAN?
Also, I had problems when I was just using the automatic settings to configure the box - in the end it works far better if you ignore the UPnP stuff, and use the manual setup process (or so I found). Again, the desktop software wizard steps you through this.
If you can connect over wifi at home, but not over wifi or 3g when away, then unless AT&T are blocking the ports, its more likely your router settings, as at home you are inside your LAN but elsewhere you have to go through your routers hardware firewall.
Just have a look at slingbox's help files.
SlingBox works fine on AT&T. Check your proxy settings on the phone. Try the "remove hidden proxy" cab. The home router also needs an outgoing port defined as well. Good Luck, I know it can work.
I will bet that it's your router/firewall blocking the incoming net traffic. Try connecting to it from a Friend's internet connection or a public computer at the library or something.
Had a similar problem with slingplayer mobile on my new HTC TouchPro- phone from Vodafone but I put in my T-mobile SIM as I wanted to keep the Web and walk.
Slingplayer worked fine from Vario3 with same sim but not from TouchPro. Eventually unticked the use proxy server in the connection settings and it started to work. Weird, as on the Vario the proxy box is ticked and it works.
Anyway, worth trying if anyone else is having problems.
One of two things, either you have not port fowarded your router to allow the Slingbox to be remotly viewed, go to portfoward.com for exact instructions for your specific router, or your hidden proxy is messing with it. More than likley its not port fowarded correctly. BTW...when your in your home network, i.e... using WiFi, it will work without the router being fwded because your slingbox is already inside your home network. When coming from the outside of your home network through 3g or whatever your router has to allow access to the slingbox.

Network Analyzer OK but data connection problems

Hi,
So far the AT&T Tilt has been kicking some serious ass. However, there has been one glitch that I'm hoping someone might know more about.
Twice now, the internet connection has stopped working through the cellular data connection. Connecting through active sync and wi-fi still works. The last time this happened I called Fido (Calgary, Canada), found out that everything was OK on their end and then tried a bunch of connection settings. Doing what they asked me to do didn't solve the problem. Then, seemingly by magic without doing anything in particular, the connection started working again and I could connect to web pages again through IE.
So it has happened again, and I can't to connect to the internet using IE (or any other application). Here is the status so far:
- tried rebooting the device
- been able to connect via wi-fi and active sync
- Installed Microsoft's Network Analyzer application which reports the following: IP address is assigned (cellular connection) and able to ping microsoft's http server (www.microsoft.com ). Note that when I disconnect my data connection the ping to microsoft fails so I believe it is actually reaching the server. There is no MAC address for the cellular network adaptor, but I don't know if this is normal or not. See the attached document which is the log file it generated.
- Tried to connect via Google Maps, Direct push (Exchange), Octro Talk. All of the applications give the same message that the page or service can't be found. It is odd that the Network Analyzer seems to be the only application that can talk to the outside world.
- Also re-ran the diable proxy cab for the Tilt
I didn't play with any of the connection settings prior to this happening so it's hard to tell what is causing the problem.
Thanks in advance,
Alan
Flash your ROM
If you are having the same trouble, I fixed my problem by flashing to an HTC ROM. Screen layout switching is faster now, my network connection is working and the system seems generaly faster. I'm using Dutty's Hybrid test final rom V4. If there is stuff about your tilt that you don't like, and you aren't actually using AT&T as your carier, then I would just ditch their ROM.
Alan

Why do some websites show up when using wifi but not GPRS/3G?

Hey y'all,
I tried to search for the answer to this but couldn't find anything. Basically, I have found certain websites (my company's webmail, for example) that show up fine when I'm on a wifi connection, but come in blank when I'm using a GPRS/HSPDA connection. I'm guessing it's either a proxy setting or a Pocket IE registry setting that is causing this, but I have nothing really to back that guess. Is there anything that can be done to let me see the websites on both connections?
When you connect to WiFi, are you at home or at work? Is it possible you are trying to connect to a site that can only be reached via the "privileged" WiFi connection you are using?
If you can connect via WiFi and not via phone...
a) You do not have the correct Carrier data profile connections installed for GPRS.
b) You have re-flashed you rom and suffered a)....!!!
c) You have lost data links and java access to sites. Install Java, or re-flash your operator and stick with the cheap option you purchased!!!
d) Check for the network setup wizard (on this forum) and go to your carriers website to check the settings.
Thanks for the replies guys...
@dunneldeen: that's a good thought, unfortunately it doesn't seem to be limited on which wifi connection - in other words, I can connect regardless of the wifi area (airport, home, coffee shop, etc.) so that's not the problem.
@Farsquidge: I'm not sure if I'm understanding right. I can hit most websites and see them fine over GPRS, just a few certain ones don't show up - thus, I don't think it's my carrier settings. Option C seems like a potential candidate, I'll try installing Java and see what happens, and I'll report back if successful.
Thanks!
Err. Please don't forget you are using 'Pocket IE' not full blown IE and it will report that back via cookie to whatever site you are on and they will send you the cut-down version.
Download the trial for Opera (Not the mini version) for Windows Mobile.
In it's setup you can set it to report as PC.
Yeah, I figured it was a Pocket IE problem. It just seems strange that it works on wifi fine but not GPRS: does it send different cookies thru wifi than GPRS?
Err.. Actually, ya caught me out there but hopefully I can go back to my previous post and say you have lost your carrier profile for net access!

At&t Tilt / wifi problem

Hey everyone!
I've just bought a new at&t tilt and determined a problem. I couldn't connect to the internet through neither my home wireless router (netgear), nor any free wireless routers in the apartment building were I live. I connected the tilt to my router, but I wasn't able to acess the internet. I tryed to change different setting but everything was unsuccessful. After I called to at&t( probably 10 times or more) I was told that I can use the wifi connection only within certain special at&t "hotspots". Is it true? Can I somehow remove this restriction?
Thanks,
Mike
frosted tourist said:
Hey everyone!
I've just bought a new at&t tilt and determined a problem. I couldn't connect to the internet through neither my home wireless router (netgear), nor any free wireless routers in the apartment building were I live. I connected the tilt to my router, but I wasn't able to acess the internet. I tryed to change different setting but everything was unsuccessful. After I called to at&t( probably 10 times or more) I was told that I can use the wifi connection only within certain special at&t "hotspots". Is it true? Can I somehow remove this restriction?
Thanks,
Mike
Click to expand...
Click to collapse
Not true. You can use any wi-fi - just like your laptop (assuming it's unsecure or you have the security code). Is your wi-fi turned on via Comm Manager? Are you using the stock ROM or have you flashed a new one? Is your wi-fi set up correctly via Comm Manager (search for Comm Manager and WLAN setting on the forum).
frosted tourist said:
Hey everyone!
I've just bought a new at&t tilt and determined a problem. I couldn't connect to the internet through neither my home wireless router (netgear), nor any free wireless routers in the apartment building were I live. I connected the tilt to my router, but I wasn't able to acess the internet. I tryed to change different setting but everything was unsuccessful. After I called to at&t( probably 10 times or more) I was told that I can use the wifi connection only within certain special at&t "hotspots". Is it true? Can I somehow remove this restriction?
Thanks,
Mike
Click to expand...
Click to collapse
I had the same problem when I got my tilt. After just fiddling around it started to work and I really didn't do much that would make a change.
Use the connection manager and try the wireless settings to make sure it sees your wireless networks.
Power it down and turn off the cell portion and just have wifi running.
I too am having problems with WIFI on my new Tilt at my home location. I have flashed the stock HTC rom (WWE rom: 1.56.405.5 / radio: 1.27.12.11) and everything on the device works perfectly. Even before that I had tried to connect using the AT&T rom, still no luck. I can get the WIFI to connect and stay active, but when I open up internet explorer or opera mini I cannot get any pages to download. I can get a connection from other places that have wifi, both secured and usecured networks and the Tilt's wifi works fine. I have other WIFI devices connected to my home wireless router and they work perfectly. I have tried playing with all the settings on the phone and even on the wireless router, still no luck.
Any help greatly appreciated.
Thanks
I just tried your suggestion about turning off the phone side of the Tilt, and having wifi running, still no luck.
You are not alone
I had the same problem as you. I tried different configs on my router. I could not even connect to other open wifi spots. I was finally able to connect after flashing to another rom with a different radio. I have tested about five roms so far. Wifi worked most of the time. I am using Dutty's 6.1 and it is working like a champ now. It seems as though many stock Tilts have that problem.
I may be wrong, but I think I remember reading somewhere that the rom and radio version do not really effect WIFI?
I got my WIFi working! First I updated the router through Netgear. Then I went to a friends house that uses a secured router as well. Then I slid the WIFI to 'best performance'. Then I successfully connected to internet at my friends house. Then I came back home, signed in to my secured router, and voila! It works like a charm now. Pretty fast too.
BiPolarXpress said:
I had the same problem as you. I tried different configs on my router. I could not even connect to other open wifi spots. I was finally able to connect after flashing to another rom with a different radio. I have tested about five roms so far. Wifi worked most of the time. I am using Dutty's 6.1 and it is working like a champ now. It seems as though many stock Tilts have that problem.
Click to expand...
Click to collapse
what radio version do you have? i have unbranded version but i still having the same problem... br
My Fix
So I had the same problem. Could not connect to home network after ROM. Go to "wireless manager" at first the icon for wifi would not allow selection. I selected bluetooth, closed it, then wifi could be selected. then select settings in wireless manager, if your network is unsecure, just next, next, finish. I was then connected. hope this helps someone out.
I've had a few problems with wi-fi. I've seemed to narrow them down to using unsecure/secure networks. I've found that my Tilt doesn't like to play well with "B" unsecure. Tested this with an older D-link, and Linksys "B" router. Haven't really had any problems with "G" networks.
frosted tourist said:
Hey everyone!
I've just bought a new at&t tilt and determined a problem. I couldn't connect to the internet through neither my home wireless router (netgear), nor any free wireless routers in the apartment building were I live. I connected the tilt to my router, but I wasn't able to acess the internet. I tryed to change different setting but everything was unsuccessful. After I called to at&t( probably 10 times or more) I was told that I can use the wifi connection only within certain special at&t "hotspots". Is it true? Can I somehow remove this restriction?
Thanks,
Mike
Click to expand...
Click to collapse

Activesync and WIFIrouter! Need solutions

Hi folks, just got my diamond almost a week ago and I already filled it up with applications, absolutely love it's wide area of functions. I came across a great idea that i could use at work: to connect the phone through activesync(that will give me internet on the phone from the computer) and then to use wifirouter app to further share this internet connection. But I couldn't get this working, because wifirouter accesses my gsm/3g internet on the phone instead of the internet obtained from the computer through activesync. Anyone got an idea how to get this working?
when u connect your phone with usb u can choose : shared internet connection. maybe then it will works dnoo
I don't think you understood, I need internet forwarding from pc to phone firstly, which I managed to do already with activesync, but I also want wifirouter application to recognize the internet being sent from the pc through activesync and not connect to edge/3g.
I think u need to setup your wifi router again this time dont set it to gprs/3g select usb to wifi. That shld work it
The wifirouter application doesnt give me any options, it just initializes and thats it.
can anyone help?
Using the USB to Wifi mode should work in this instance. That is if you're using one of the paid versions as I'm not sure if the free version supported this.

Categories

Resources