How to prevent Smart Dial to appear after a call? - Touch Diamond, MDA Compact IV General

After a phone call Smart Dial appears for 5 seconds before it disappears.
Is it possible to get rid of that or at least reduce the time to 1 second?
Thanks.

I would like this as well as it takes to long to revert back to tomtom

+1 Bugs me too.

yep I am with you on that one too.
also the three second delay solutions posted here still dont work

ditto...any solution?

*Bump* Anyone, please

bump again.. maybe if we'd ask this in the themes and programs section?

no , i think this is the right place. a registry tweak maybe

actually, i knew about this but hoped for a sollution as well.
disable the phone skin with Advance Config and revert back to the old winmobile dialer.

Related

Auto popup Keyboard in SMS/Mail, Batteryalarm

Hi All,
I have a question. Every time I open a SMS/Mail the keyboard pops up automaticly while most of the times I only want to read the message.
It is making the screen smaller and it takes time.
Is there a way to solve it?
Further I did not find a way to have an audio/acoustical alarm when the battery is finished so in a call the phone will switch of at once and immediately without warning.
Do I miss some settings or .......
Thanks in advance for help, Remco
When you get the message...instead of opening it there...click on the inbox in the lower left area of screen and that will open it up without the keyboard...when you click on it in the envelope or sms screen...it opens it because it thinks you want to reply straight away.
Battery alarm??...dont think there is one to be honest. I havent seen anything in the notifications or alarm section of the phone...Shame really as it would have been useful to have some sort of alarm going off when the battery gets low or is about to die.
Spawn12 said:
When you get the message...instead of opening it there...click on the inbox in the lower left area of screen and that will open it up without the keyboard...when you click on it in the envelope or sms screen...it opens it because it thinks you want to reply straight away.
Battery alarm??...dont think there is one to be honest. I havent seen anything in the notifications or alarm section of the phone...Shame really as it would have been useful to have some sort of alarm going off when the battery gets low or is about to die.
Click to expand...
Click to collapse
same thing here the keyboard pops up automaticly when opening message ?!
click on the inbox in the lower left area
cant find it ?
do you mean the notifications when new message comeup
yeah i also find it really annoying that the keyboard pops up automatically everywhere.
it was not like this on my old Wizard with WM5.
i looked around in the options but cant find anyway to not make the keyboard pop up automatically yet.
It's because you have no Hardware Keyboard, and as the OS assumes you want to reply, it's helping you out. You'd probaly find theres a bunch of people who love this feature as much as you hate it
Rory
lol
Why dont you just read it in TF3D? bt yeah as for the the battery sound you can go into sound & notifications and select to enable sound for 'Events' thats the best i can think of atm.
I also find it frustrating with the keyboard.
Can this be set with a registry key to not have it pop up.
If i need the keyboard I can klick down in the middle of the screen to bring it up.
--
eslin
HKEY_CURRENT_USER\ControlPanel\Sip>:
Create or change DWORD TurnOffAutoDeploy from 0 to 1
Nope there is no solution to this problem. There will never be a solution to this problem.
DONT try and search this forum for a solution to this problem because searching for a solution to this problem will not find a single solution to this problem.
There IS NOT a cab installer available to fix this, just as there is NO registry entries available in this forum to solve this problem
There has in fact NOT been 3 Topics in the last week that have solved this same problem.
I suggest starting a few more new topics in the forum asking for solutions to this problem.
Sorry for the sarcasm but jeez how many times must the same question be asked in the same forum in the same week!!!!
http://forum.xda-developers.com/showthread.php?t=413396
save the sarcasm dude.there is a solution.I found a cab called SIPUpDisable. works perfect.but remember you can't uninstall it.but let me know if you find a way.
found it
now you can disable it
HKEY_CURRENT_USER\ControlPanel\Sip>:
Create or change DWORD TurnOffAutoDeploy from 0 to 1
dimitris12s said:
save the sarcasm dude.there is a solution.I found a cab called SIPUpDisable. works perfect.but remember you can't uninstall it.but let me know if you find a way.
Click to expand...
Click to collapse
HKEY_CURRENT_USER\ControlPanel\Sip>:
change DWORD TurnOffAutoDeploy from 1 to 0
i can't find that registry inside the SIP folder.
any help ?
janowitz said:
Further I did not find a way to have an audio/acoustical alarm when the battery is finished so in a call the phone will switch of at once and immediately without warning.
Click to expand...
Click to collapse
Possible with (albeit commercial) pocketMax phoneAlarm.
Greetings Josh

Tilt Dialer Button Behavior

I got a warranty replacement Tilt last week. On my new device, I get no sounds or vibrations when entering numbers on the telephone dialer. My last Tilt used to make a sound as I entered numbers. I have Kaiser Tweak installed, but get nothing whether I set dialer button behavior to tones or vibrate. Any suggestions? I went to Sounds & Notifications and enabled sounds for Screen Taps and Hard Buttons, with still no change for the phone dialer.
did you try searching??
try these keywords:
- keypad vibrate
- keypad sound
and see if there is solution for your problem.
i guess there is, so i would suggest to use search in the future.
antihrist said:
did you try searching??
try these keywords:
- keypad vibrate
- keypad sound
and see if there is solution for your problem.
i guess there is, so i would suggest to use search in the future.
Click to expand...
Click to collapse
been there, done that, couldn't find a fix
are you sure?
http://forum.xda-developers.com/showthread.php?t=392235&highlight=keypad+vibrate
http://forum.xda-developers.com/showpost.php?p=2184513&postcount=2
have you tried this?
antihrist said:
are you sure?
http://forum.xda-developers.com/showthread.php?t=392235&highlight=keypad+vibrate
http://forum.xda-developers.com/showpost.php?p=2184513&postcount=2
have you tried this?
Click to expand...
Click to collapse
thanks, I had found the vibrate thread, but that wasn't what I was looking for. My search did not turn up the dialpad sound fix cab.
there is more than this one thread regarding vibrating dialpad. if this is not what you was looking for, than you could explain what you need in more details. link to sound fix was in keypad vibrate thread. please try searching. but for real this time. you can't expect to find solution with two clicks, you will need some time for serious customization of your phone.

Dialer off right after end of call- HOW to do this??

Hi,
I've been looking for the answer but couldn't find any. This is very annoying for me.I use S2u2 and when I pick up an incoming call with a button or slider after the call the dialer is still on and Phone locks automatically(with dialer on). I have to unlock S2U2 close dialer and lock the phone again- this drives me crazy. Any solution will be appreciated.Thanks in advance for any help with this...
http://forum.xda-developers.com/showthread.php?t=450146&page=4 -ths doesn't work for me
Does really nobody drive this crazy?
pegaz said:
Does really nobody drive this crazy?
Click to expand...
Click to collapse
Me too..
But still no solution..
Yeah it annoys me too. I use S2U2 as well and I hate that both the dialer and the contact list don't close after I made a call or receive one. The registry solution from the other thread doesn't work with the TF3D dialer.
pegaz said:
Hi,
I've been looking for the answer but couldn't find any. This is very annoying for me.I use S2u2 and when I pick up an incoming call with a button or slider after the call the dialer is still on and Phone locks automatically(with dialer on). I have to unlock S2U2 close dialer and lock the phone again- this drives me crazy. Any solution will be appreciated.Thanks in advance for any help with this...
http://forum.xda-developers.com/showthread.php?t=450146&page=4 -ths doesn't work for me
Click to expand...
Click to collapse
Have you tried Advanced Config > Phone > End Call Delay? I haven't myself so I don't know if it's the time it takes to disconnect the call or the time it takes to close the dialer. Worth a try.
No, that's the time it takes for the phone to end your call after pressing the end-call button. Which is ridiculous, when I press the button I want to end it immediately .
I agree. Of what purpose could it possibly be to delay the end of the call?!? I mean if you could recover from accidentally hitting the end key that would be one thing. But you can't so any delay is just plain stupid AFAICT.
You can also use Advanced Config to turn off the silly animations and sounds at start up or shutdown. They also do little else but make start up and shutdown longer...
I've switched to the WM default dialer now, as was suggested in this thread, let's see if it it works for me. I liked the HTC dialer though .
HertogJanNL said:
I've switched to the WM default dialer now, as was suggested in this thread, let's see if it it works for me. I liked the HTC dialer though .
Click to expand...
Click to collapse
I've also tried that and it works but that's not a solution.WMs dialer sucks, keys are small and poor responsible for touch.Anyway I don't like WMs dialer. I don't understand why this reg tweak works with some roms but with some doesn't ;/. Hope it will be fixed in next official rom or somebody from XDA will find a solution for this annoying issue.As U guys sad when I press end button i wanna end immediately ,not in 5 sec!.
I now use the phonecanvas cab for my Diamond, so I don't have to use S2U2 anymore. But I believe this only works with the HTC dialer.
So does anyone have a solution for this problem? I really need it

"slide down for more options"

Hello, im using miri 8.1 premium and i want to remove the "slide down for more options" when i make a call... is this possible??
+1 i hate it!
+1, i really don't like it
yes! Me too, it is the most useless junk ever thought by the HTC ppl! It is annoying, please someone please help us remove it!
And why don't you ask miri for it in is thread instead opening a new one???
speed200 said:
And why don't you ask miri for it in is thread instead opening a new one???
Click to expand...
Click to collapse
Because its not just in Miri's rom, its in more or less all of them now
I want it back to my ROM badly. where is the cab?
+1
i also do not need it, and would like to know how to turn it off
+1.
Its a pain to mute/un-mute during conf calls with this on.
Anyone?
For those users interested to find a solution to disable the curtain, here is the package. Could be a dll or a registry key.
Found a solution
Found a solution with reg key.
Goto HKLM\Software\HTC\Phone\Cover
There is a DWORD value ResumeInterval set to 5000 (5secs).
I changed it 300000 (5mins) and soft-reset.
Now the call starts with slider on, you only need to slide down once. Then it will wait for 5 mins of inactivity to come back up.
Probably higher values can be used, but 5mins should work for me.
As always, modify registry at your own risk...
sank27 said:
Found a solution with reg key.
Goto HKLM\Software\HTC\Phone\Cover
There is a DWORD value ResumeInterval set to 5000 (5secs).
I changed it 300000 (5mins) and soft-reset.
Now the call starts with slider on, you only need to slide down once. Then it will wait for 5 mins of inactivity to come back up.
Probably higher values can be used, but 5mins should work for me.
As always, modify registry at your own risk...
Click to expand...
Click to collapse
Maybe you can set it to 0 (zero) to disable it?
kwbr said:
Maybe you can set it to 0 (zero) to disable it?
Click to expand...
Click to collapse
i tried that actually but it still show up
i also tried to delete the whole key "cover"
no luck
solaris10 said:
I want it back to my ROM badly. where is the cab?
Click to expand...
Click to collapse
Me too. any cab availabale?
I must admit the Topaz dialer (as nice as it may look) sux! What was wrong with the standard HTC HD dialer? it supported landscape and was functional.
homer285 said:
I must admit the Topaz dialer (as nice as it may look) sux! What was wrong with the standard HTC HD dialer? it supported landscape and was functional.
Click to expand...
Click to collapse
nothing wrong with it. just when i call, i press the phone with my face and something happens in middle - hang down, second call and so on...
homer285 said:
I must admit the Topaz dialer (as nice as it may look) sux! What was wrong with the standard HTC HD dialer? it supported landscape and was functional.
Click to expand...
Click to collapse
contact managment sux on the standard one
and in-call options are better on the new ones
tiburone said:
nothing wrong with it. just when i call, i press the phone with my face and something happens in middle - hang down, second call and so on...
Click to expand...
Click to collapse
i assume you like the curtain and i'm glad for you, others don't
maybe we use this and just don't need an extra step of protection
and we want to find a way to turn it off
Sir.B said:
contact managment sux on the standard one
and in-call options are better on the new ones
Click to expand...
Click to collapse
I had zero issue with the standard one, it was functional and did exactly as one would expect. Topaz dialer hides all options instantly making it absolutely dangerous to try and activate loudspeaker whilst driving . The other issue is landscape view, if using any rotate screen app and having the device in landscape (ie. whilst using GPS apps etc) and receiving a call there is no dialer shown at all!
Surely I am not the only one to notice these problems?
thanks man it helped
Sir.B said:
contact managment sux on the standard one
and in-call options are better on the new ones
i assume you like the curtain and i'm glad for you, others don't
maybe we use this and just don't need an extra step of protection
and we want to find a way to turn it off
Click to expand...
Click to collapse
thank's. I'll try that - it looks ok.
But no i have a problem - remove the curtain...

SMS - 2-5 seconds to load cursor, slow input from keyboard

Anyone have the problem where when you select a contact and then text it takes 2-5 seconds to load the screen with the cursor? And the cursor itself is pretty slow to get input from the keyboard.
I'm pretty sure my keyboard itself needs cleaning as I've seen in other threads. However in Win 6.1 and now 6.5 with autocomplete of sentences on or off I still see the huge delay before I can type. Something feels wrong about this, anyone else experience this and have any advice?
usually turning off any autocomplete or t9 should speed up typing delay
well - stuff like that happens in Windows Mobile
theres a registry cab file somewhere here that fixes this.. do a search
Hmm yeah I have text correction set to None so no prediction or sugesstion.
I'm running windows mobile 6.5 is there anywhere else I could go.
Just counted now and from the time the screen acknowledge my click on text to the white screen and cursor loading is 7 seconds. My god windows mobile grrrr!
Everything else on the phone is pretty fast but wow 7 seconds!
royalbloodvi - I replied this morning before seeing your reply.
I've looked for cabs, registry tweak etc searching here and on google and I haven't had any luck. I've tried w/o quotes stuff like "SMS slow registry tweak" "txt slow" etc etc but no luck any pointers?
royalbloodvi said:
theres a registry cab file somewhere here that fixes this.. do a search
Click to expand...
Click to collapse
LOL. You're a funny man... telling him to "do a search" after all those ****worthy threads You've started.
anyway...
I don't know if it's going to work for You mate, but worked like a charm on my tytn 2 back in the past.
Hey, not sure if you tried this, but there's also a cab, or registry hack which disables the text "counter" in sms which also decreases the delay.
Here's there XDA thread which links to the original posting at ppcgeeks:
http://forum.xda-developers.com/showthread.php?t=581901
I have it cooked into my rom and it does help. I don't even miss the counter cause everyone I know either has unlimited text, or doesn't text at all.
Also, whenever you want to send a text make sure your Xperia is in landscape before going into the sms program or hitting reply. It helps a bit there too.
hope all that helps.
peace
realaxed said:
Hey, not sure if you tried this, but there's also a cab, or registry hack which disables the text "counter" in sms which also decreases the delay.
Here's there XDA thread which links to the original posting at ppcgeeks:
http://forum.xda-developers.com/showthread.php?t=581901
I have it cooked into my rom and it does help. I don't even miss the counter cause everyone I know either has unlimited text, or doesn't text at all.
Also, whenever you want to send a text make sure your Xperia is in landscape before going into the sms program or hitting reply. It helps a bit there too.
hope all that helps.
peace
Click to expand...
Click to collapse
yea thats the one..
Thanks I ran the cab and followed the directions about thread_sms.htm
All I saw in thread_sms.htm was <Inbox:ComposeBodyCount> which I assume is not the count of characters and my unexperia rom already removed that.
Having it in landscape mode prior to clicking someone's name definitely helps although first time I do it there's still some 5 secs or so of delay. But if I go back to another contact there's none. I'll keep playing a bit but thanks much better.
Day by day I will actually make my phone usable!
Edit: Also it's great how original X1 users have to wait and use cooked roms to get features from X2 to actually make the X1 "ok"

Categories

Resources