Database Develop

Vibrating Key Dialer for Tilt?

Is there a cab for enabling vibrating key dialer for the Tilt? I've searched for it but I can't seem to find one. I guess vibrate and dialer are too common terms or I'm just useless at searching. Thanks in advance for any help.

This is the only one I've ever seen. It's a little util written by someone, I don't even remember where. (Otherwise I'd credit the person).
It mostly works. The only issue is the vibrate is delayed slightly, so it only vibrates if you press *deliberately* on the number. If you do a quick tap, it doesn't vibrate...

Thanks. Will give it a try.
Looks like some credit needs to go here: http://forum.xda-developers.com/showthread.php?t=304767
But sounds like it was a rework of previous work so it might not be his.

Thanks for the cab file so I don't have to edit the registry every time I hard reset my machine

It's just a registry setting? Can you tell me the key and value?

How to prevent Smart Dial to appear after a call?

After a phone call Smart Dial appears for 5 seconds before it disappears.
Is it possible to get rid of that or at least reduce the time to 1 second?
Thanks.

I would like this as well as it takes to long to revert back to tomtom

+1 Bugs me too.

yep I am with you on that one too.
also the three second delay solutions posted here still dont work

ditto...any solution?

*Bump* Anyone, please

bump again.. maybe if we'd ask this in the themes and programs section?

no , i think this is the right place. a registry tweak maybe

actually, i knew about this but hoped for a sollution as well.
disable the phone skin with Advance Config and revert back to the old winmobile dialer.

Dialer off right after end of call- HOW to do this??

Hi,
I've been looking for the answer but couldn't find any. This is very annoying for me.I use S2u2 and when I pick up an incoming call with a button or slider after the call the dialer is still on and Phone locks automatically(with dialer on). I have to unlock S2U2 close dialer and lock the phone again- this drives me crazy. Any solution will be appreciated.Thanks in advance for any help with this...
http://forum.xda-developers.com/showthread.php?t=450146&page=4 -ths doesn't work for me

Does really nobody drive this crazy?

pegaz said:
Does really nobody drive this crazy?
Click to expand...
Click to collapse
Me too..
But still no solution..

Yeah it annoys me too. I use S2U2 as well and I hate that both the dialer and the contact list don't close after I made a call or receive one. The registry solution from the other thread doesn't work with the TF3D dialer.

pegaz said:
Hi,
I've been looking for the answer but couldn't find any. This is very annoying for me.I use S2u2 and when I pick up an incoming call with a button or slider after the call the dialer is still on and Phone locks automatically(with dialer on). I have to unlock S2U2 close dialer and lock the phone again- this drives me crazy. Any solution will be appreciated.Thanks in advance for any help with this...
http://forum.xda-developers.com/showthread.php?t=450146&page=4 -ths doesn't work for me
Click to expand...
Click to collapse
Have you tried Advanced Config > Phone > End Call Delay? I haven't myself so I don't know if it's the time it takes to disconnect the call or the time it takes to close the dialer. Worth a try.

No, that's the time it takes for the phone to end your call after pressing the end-call button. Which is ridiculous, when I press the button I want to end it immediately .

I agree. Of what purpose could it possibly be to delay the end of the call?!? I mean if you could recover from accidentally hitting the end key that would be one thing. But you can't so any delay is just plain stupid AFAICT.
You can also use Advanced Config to turn off the silly animations and sounds at start up or shutdown. They also do little else but make start up and shutdown longer...

I've switched to the WM default dialer now, as was suggested in this thread, let's see if it it works for me. I liked the HTC dialer though .

HertogJanNL said:
I've switched to the WM default dialer now, as was suggested in this thread, let's see if it it works for me. I liked the HTC dialer though .
Click to expand...
Click to collapse
I've also tried that and it works but that's not a solution.WMs dialer sucks, keys are small and poor responsible for touch.Anyway I don't like WMs dialer. I don't understand why this reg tweak works with some roms but with some doesn't ;/. Hope it will be fixed in next official rom or somebody from XDA will find a solution for this annoying issue.As U guys sad when I press end button i wanna end immediately ,not in 5 sec!.

I now use the phonecanvas cab for my Diamond, so I don't have to use S2U2 anymore. But I believe this only works with the HTC dialer.
So does anyone have a solution for this problem? I really need it

Custom keypad tone for TP?

Good day, new here and hoping someone can assist with a question I am unable to find an answer for. I have a touch pro on the Sprint network, I have not cracked it or done much to this phone as I am still very new to this device (retired my Moto Q). The only customization I have done thus far is instal the transparent flip clock.
What I am hoping to do is edit the tone my keypad makes when using the TP as a phone. Right now the only options available when having the phones keypad up under menu>options> keypad is Off, Long tones, and Short tones. What i would like to do is make it more costum, perhaps by using the 'clicking' sound the new BB Storm makes when pressing, really anything but that annoying standard 'beep' or nothing at all.
Sorry if I missed something in the search or wiki, I did look but nothing doing.
Thanks in advance!

shanes17 said:
Good day, new here and hoping someone can assist with a question I am unable to find an answer for. I have a touch pro on the Sprint network, I have not cracked it or done much to this phone as I am still very new to this device (retired my Moto Q). The only customization I have done thus far is instal the transparent flip clock.
What I am hoping to do is edit the tone my keypad makes when using the TP as a phone. Right now the only options available when having the phones keypad up under menu>options> keypad is Off, Long tones, and Short tones. What i would like to do is make it more costum, perhaps by using the 'clicking' sound the new BB Storm makes when pressing, really anything but that annoying standard 'beep' or nothing at all.
Sorry if I missed something in the search or wiki, I did look but nothing doing.
Thanks in advance!
Click to expand...
Click to collapse
search in the reg under HKCU\controlpanel\sounds i think if no luck just search the reg for sounds folder. hope this helps

thanks for your response, i did find the keys, however they can only be changed to another numeric character. The keys are labeled Dtmf0, Dtmf1, Dtmf2, etc for each key. I verified this by changing some of them. So you can set the keys to make the seperate tones, such as making them all sound like your dialing '1', or make '9' have the '2' tone, etc, but I cant find a way to make it use a sound file, any advice? Hope I was clear enough on this.
Thanks again
-Shane

[Q] Question regarding Dialer Pad "long tones" and how to change?

Hi All,
Can someone tell me how I can change my dialer from inputting "long tones" when dialing to "short tones"?
Example... When I call my bank to check my acct. balance and enter my ATM card number, it always gets read wrong because of the length of the dialer / number tone and I am never able to get it right.
My Samsung Omnia was like this as well but it had an option for either "long button press tone" or "short button press tone" and I cannot seem to find this option on my SGS.
Can anyone advise on this? Does anyone know what Im talking about?

Anyone? Does anyone know how to change this or if there is even an option to do so?

Use Dialer One (search the Market). There you set the tone interval in miliseconds (unders settings).
And believe me... You will never use the stock dialer anymore

c3p9 said:
Use Dialer One (search the Market). There you set the tone interval in miliseconds (unders settings).
And believe me... You will never use the stock dialer anymore
Click to expand...
Click to collapse
How does this work exactly? Does it actually automatically replace the stock dialer or does it need to be started seperately everytime you make a call?
I dont mind the stcok dialed otherwise but I just wish I could figure out how to shorten the tones when dialing the phone.
This also only happens when I am already IN a call. When I make the initial call there is no actual tone sounds like a regular push button phone. It makes little "bloop" sounds instead... (Im sure you know what I mean... LOL!)

I have this same problem and it seems to happen at random, try disabling the touch tone sounds in the sound settings.

Nirvana388 said:
I have this same problem and it seems to happen at random, try disabling the touch tone sounds in the sound settings.
Click to expand...
Click to collapse
I have just tried that and I will let you know my findings. Thats kind of weird that this is the only way to do this and that there is no setting for it.

Nirvana388 said:
I have this same problem and it seems to happen at random, try disabling the touch tone sounds in the sound settings.
Click to expand...
Click to collapse
I have just tried that and I will let you know my findings. Thats kind of weird that this is the only way to do this and that there is no setting for it.
***EDIT*** Yes... This works but again it is awfully strange that there is no actual setting to switch this.

yiannisthegreek said:
How does this work exactly? Does it actually automatically replace the stock dialer or does it need to be started seperately everytime you make a call?
I dont mind the stcok dialed otherwise but I just wish I could figure out how to shorten the tones when dialing the phone.
This also only happens when I am already IN a call. When I make the initial call there is no actual tone sounds like a regular push button phone. It makes little "bloop" sounds instead... (Im sure you know what I mean... LOL!)
Click to expand...
Click to collapse
It replaces the original dialer (actually both can coexist). You just have to choose which icon to click. But I tell you. It's really a way better experience. Very customizable.