Hi , ive had the issue with randomly being stuck in the SPL a few weeks ago but the problem seemed to just go away by itself . Yesterday i flashed a ROM and noticed that after the first or second reboot i was getting stuck at the boot screen (Not the SPL the screen after that with the info in red) .
Today i flashed back to my current ROM and noticed the same problem again when installing programs one cab would fail and all other installs after that . When i rebooted i got stuck at the boot screen (again not the SPL)
so after another try i finally got all programs installed and rebooted but when i reached the today screen my background was gone and i got an exception about the programs in the startup folder not being found .
After opening file explorer it seems most programs are corrupt and will not run . Has anyone got any ideas on what i should try to fix this ?
Update im afraid its not good news i tried to work around the problem with sprite backup but things seem to have got worse .
Im now permanently stuck at the smart mobility screen with my radio information being displayed in red . Ive tried flashing a new rom and hard reseting which is all perfectly stable but i just cant get past the smart mobility screen .
Whats weird is the led on the left is blinking green , Any ideas before i downgrade (tiltscreen) to a Sony X1 (Dpad and hardware buttons)
Similar...May Help Some
AppleSucks said:
Update im afraid its not good news i tried to work around the problem with sprite backup but things seem to have got worse .
Im now permanently stuck at the smart mobility screen with my radio information being displayed in red . Ive tried flashing a new rom and hard reseting which is all perfectly stable but i just cant get past the smart mobility screen .
Whats weird is the led on the left is blinking green , Any ideas before i downgrade (tiltscreen) to a Sony X1 (Dpad and hardware buttons)
Click to expand...
Click to collapse
Hi there,
We didn't get there the same way, and I don't have the 'blinking green' LED, But I've got a similar "stuck" problem on the Forum here:
http://forum.xda-developers.com/showthread.php?t=508100
I'll follow yours and you can check this one out...I may be getting some help from 'higher powers' soon if I don't find a resolution on my own.
Wish I could actually ANSWER your question, and I'll let you know if I find anything else myself...
On the un-bricked road less traveled,
RAF
Am ok this is weird everythings back to normal now I turned it on this morning and it boots up fine no problems installing programs or anything .
Confused
That's Good...Though Agreed Confusing...News
Wow...so, good for you! I'm happy that your's did not proceed as mine has...or better said, has NOT.
Wish mine would just 'turn on and boot up fine', but it appears that I may be Murphy's bastard child.
Murphy has a theory of relativity that has nothing to do with Mass or the Speed of Light...
It simply states that if you're a relative of Murphy's, it WILL happen to YOU...hence the offspring reference.
On the other hand, confusion can be good...I'll bet it had you searching the Forum and finding out stuff you didn't know.
If nothing else, maybe you found some cool new ways to get into completely different kinds of trouble!
Glad to see your out of the glitch, hang in there...not by your neck!
RAF
Hello
Ive finally got round to putting new radios and ROM on my diamond, a year after buying. Didnt want to before now incase i cocked it up (theres a lot of things to remember!)
Hard SPL went fine and i was putting the new radio on (1.00.25.05 in this case) when, at about 80% of the way through the install my pc froze (as its having a habit of doing at the most awkward times recently!)
I soft reset the diamond but now its at what i assume is the bootloader screen (?), its got red, green, blue and white bars and various writing, along with a message saying 'Upgrade ROM code error Please try again'
I had a hunt round and found something for another device saying how to get it back by loading a factory ROM through the bootloader menu but i dont know how to do this as i dont have a connection to activesync (phone wont go beyond this screen) etc.
If someone could explain in relatively simple steps it would help!
I should also clarify that the only way i can get this screen off is to remove all power but as soon as i put power back on it loads up direct to this screen again!)
When you device is in bootloader mode, you dont need active sync connection. just run the update utility and it will work without it, as it uses different drivers when connecting.
This turned out to be quite easy actually, i stumbled across the answer somewhere else!
Thanks for the help
So, I plugged my Kaiser (Tilt) into my computer the other day to charge it, and the next morning when I unplugged it, I noticed it was locked up. No biggie, I soft-reset it, and it came directly back to the bootloader (right before the bootloader shows is a white screen, that says "Loading image... No image found!", that flashes for a fraction of a second.
If I plug it into my computer at this point, Windows says the USB device has malfunctioned and it doesn't recognize it. I can't flash it ("connection error"), and it wouldn't hard reset.
Then it kinda came back to life, kinda. Suddenly it'll boot into WM. Windows still doesn't recognize it, but I used JumpSPL to get it into a bootloader, and tried to install a HardSPL on it so I could flash a new ROM (to this point it's been stock-only because it belongs to the company I work for). The HardSPL flash failed partway through, and then it was stuck in bootloader for real. At that point I tried flashing a stock ROM, and it kept failing at different points, never getting more than about halfway through.
Does anyone have any suggestions? Or, do you want to buy it? At this point it's mine (company doesn't want it back), so I'm willing to experiment freely with it. Right up until my Touch Pro 2 comes in and I lose interest
*** UPDATE ***
So after writing this, just for kicks, I decided to give re-flashing the original ROM one more shot (it's been off and untouched now for several days at this point) and the flash succeeded. We'll see where it goes from here
Good luck with your phone.. I hope all goes well.. If you find out what the problem was/is, let me know
Hey godefroi, im new to all of this, just bought a messed up tilt from my friend, and i want to know if you could givve me the link for the insturctions to refalsh my tilt
Just hit up AT&T's site (which redirects you to HTC's site) and download the ROM. The file you want is "_ATT Tilt_RUU_Kaiser_CINGULAR_WWE_3.57.502.2_radio_sign_25.88.40.05_1.65.21.18_Ship.exe", which was the latest update for the phone.
Seems it's not fixed. After playing around with it for a couple days, it's back into bootloader and stuck there. Taking out the battery and leaving it for a few hours brings it back for a while, but it seems there's no permanant fix. Next step will be flashing HardSPL and a custom ROM. I'll update when that happens.
awww dang, that sucks. thank you for tellin me. hopin your tilt comes out ok
Did you ever get this resolved?
Hey man did you ever get this fixed? I cant find anything on it.
I can get to a boot loader screen and it shows USB and when I plug it into my computer I hear the sound that it's recognized but my active sync wont connect.
This is what I posted earlier and a moderator killed the post because I didn't spend hours hunting for a solution first before posting. I don't think one exists but if there is I would be glad to know it. I have flashed this phone and my older HTC Wizard dozens of times with no issues so Im not a "noob"
Earlier today I was taking a picture and the screen kind of stuck so I has to soft reboot it.
It didn't come back up. I was left at the rainbow bootloader screen.
I tried holding the camera button down and rebooting but it didn't change anything.
I tried several different combo's of holding keys down and rebooting and it always came back to that bootloader screen.
So the next thing I did was to format my cd card and downloaded KaisDiagTest1.zip and then coppied the KAISDIAG.NBH image file from the zip on to the root of the sd card.
That worked fine and I was left at a screen saying SPL 1.00.OliNex.
Next thing I did is were I think I screwed up. I flashed it with _ATT Tilt_RUU_Kaiser_CINGULAR_WWE_1.62.502.0_radio_sign _22.45.88.07_1.27.14.09R2_Ship.exe which is the ROM from the HTC site and I think I was only supose to use a custom ROM and now after it finished flashing the ROM it rebooted and is stuck showing loading ... on the screen.
It goes past the boot loader and is stuck at loading...
Please advise if there is anything I can do.
Cheers,
Chris
godefroi said:
So, I plugged my Kaiser (Tilt) into my computer the other day to charge it, and the next morning when I unplugged it, I noticed it was locked up. No biggie, I soft-reset it, and it came directly back to the bootloader (right before the bootloader shows is a white screen, that says "Loading image... No image found!", that flashes for a fraction of a second.
If I plug it into my computer at this point, Windows says the USB device has malfunctioned and it doesn't recognize it. I can't flash it ("connection error"), and it wouldn't hard reset.
Then it kinda came back to life, kinda. Suddenly it'll boot into WM. Windows still doesn't recognize it, but I used JumpSPL to get it into a bootloader, and tried to install a HardSPL on it so I could flash a new ROM (to this point it's been stock-only because it belongs to the company I work for). The HardSPL flash failed partway through, and then it was stuck in bootloader for real. At that point I tried flashing a stock ROM, and it kept failing at different points, never getting more than about halfway through.
Does anyone have any suggestions? Or, do you want to buy it? At this point it's mine (company doesn't want it back), so I'm willing to experiment freely with it. Right up until my Touch Pro 2 comes in and I lose interest
*** UPDATE ***
So after writing this, just for kicks, I decided to give re-flashing the original ROM one more shot (it's been off and untouched now for several days at this point) and the flash succeeded. We'll see where it goes from here
Click to expand...
Click to collapse
I never did. Every once in a while I can get it reflashed, but inevitably it stops working. Just like yours, I'll sfot reset it and it'll be stuck in bootloader.
Best bet is when it gets stuck on the bootloader or on the "white screen" as to put it. Do the following:
1) Unplug battery, memory car and simcard. Reinsert battery ONLY after 3 seconds (cards stay out!)
2) Hold BOTH softkeys down at the same time
3) Whilst holding softkeys, turn the unit on
4) You will be prompted to press "SEND" to reset all user data (you will lose everything on the internal storage. Press the Dial (green button) to reset.
5) When it's finished, you will be prompted to press "SEND" to reboot. Press send and it will boot into WM but might take slightly longer.
6) Realign your pointer and tada. It's up and running.
n.b. This often happens when the radio version of your phone isn't correct. If you notice, when you get stuck in the "white screen" the "gsm signal sight" is frashing green!
I've got to warn you again, this procedure WILL delete all of your internal user storage, hence why I recommend taking out all of the cards before proceeding.
heyadrian said:
Best bet is when it gets stuck on the bootloader or on the "white screen" as to put it. Do the following:
1) Unplug battery, memory car and simcard. Reinsert battery ONLY after 3 seconds (cards stay out!)
2) Hold BOTH softkeys down at the same time
3) Whilst holding softkeys, turn the unit on
4) You will be prompted to press "SEND" to reset all user data (you will lose everything on the internal storage. Press the Dial (green button) to reset.
Click to expand...
Click to collapse
Nope. Stuck in bootloader is stuck in bootloader. Like, stuck. No, really, it's stuck. Hard-resetting doesn't get it out.
heyadrian said:
n.b. This often happens when the radio version of your phone isn't correct. If you notice, when you get stuck in the "white screen" the "gsm signal sight" is frashing green!
Click to expand...
Click to collapse
There's no white screen, just bootloader rainbow. Also, there's no chance that I flashed the wrong radio, because this phone has never been flashed with anything but the official ROM. It's never even had a HardSPL flashed on it.
hmmm...now that you mention it has never had a hardSPL, maybe that could be the next step?
i understand that some people may want to keep a "stock" configuration in case waranty needs to be claimed or for any other valid reasons...but if the phone is out of waranty, theres little to lose.
only reason i'm suggesting it is because cmonex has a hardSPL that aims to fix EXACTLY this problem, among others (if i understand your problem and cmonex's fix correctly):
http://forum.xda-developers.com/showthread.php?t=420683
also, this thread links to a page in the wiki about your problem (or something along the same lines):
http://forum.xda-developers.com/showthread.php?t=423486
finally, a collection of hardSPL versions can be found in this "roll up" thread:
http://forum.xda-developers.com/showthread.php?t=498320
i guess you may have already gone through the above mentioned links but if not, they may open up more avenues for troubleshooting or even a permanent resolution.
My screen has been unresponsive for a full day. It was fine when I went to bed last night, and today it's completely unresponsive. I flashed to a different rom, and even to the original sprint rom hoping that would change something - it hasn't.
I'm hoping to relock my phone so I can take it in to a sprint store tomorrow. I downloaded the Securelock.exe file I found in the WIKI but I'm unable to execute it since I can't get past the "align screen"
Does anybody have any suggestions, or anybody run into this problem before have any helpful advice?
Hello guys,
I've been messing around with my Motorola Razr i XT890 the last couple of days, trying to get it "back to life".
It suddenly shut down and would get stuck on the red "M" logo, right when the animation would start (the white wavey-type of lines freeze and that is all it would do. I, myself, am not really much up to date on rooting, installing custom roms, you know; the whole developing thing (I find it interesting, it is just that I lack time to be able to learn more). Anyway, the phone got stuck and I've managed to factory reset it, after a while the phone would freeze and again get stuck on the red logo, this went on until it would not boot at all. All I got was a short vibration and the green led would light up for like one second. Using this forum I've found a solution to bring it back to the point it would get back into fastboot (Actually holding the camera button down with usb attached, install some specific drivers and then run a batch file).
At this point this is my situation:
I'm stuck on fastboot, however I turn on the phone it will get into fastboot (see attached image to see what it says)
[IMG_20160914_210059.jpg](https://postimg.org/image/ptin5opgl/)
I, for some reason, have Philz Recovery installed and tried to use adb sideload to install a few files but my biggest problem is that I'm not sure which firmware I need, I'm really confused about all the terms and what not. I'm not the type of person that pays much attention and like knows the difference between JB or KitKat or whatever. All I know is that the phone was purchased in Germany along with a contract with either Vodafone or O2 (really not sure). I have so many files and tools installed on my PC and I would like to delete everything and start from scratch. I have fastboot and adb working (except for RSDLite, for some reason it just won't recognize the device, while adb sideload did work....haven't figured that one out yet.
If any one happens to know. or can post a link for 1 or 2 versions of the firmware and help me out. Just point me in the right direction, I know my way around a computer but like I said, I've never really done much in this area
I bought a new model Motorola soon after this one crashed the second time, so it's not even about the phone itself. I kind of challenged myself to get it working again, on top of that, it was a very good phone and I got really used to it. These new big screens are too much for me so if I get it working I might actually start using it again lol.
Also thanks to all of you who put time and effort in helping people who have these kind of problems, it's a really nice community overall and I've gotten to like it and will try to spend more time learning about this. I might just help out some lost soul myself some day
PS; sry about the green lol, I actually just realized it...I just can't be bothered cropping it out