hey, just wondering, i came across the HTC kaiser, and i want to install a diff rom on it, maybe romeos rom, but how do i go about doing it step by step, and how do i install hardspl because when i tried installing a rom, it told me to make sure you have hardspl or something like that installed....please help, i tried to search, when i press the search button it tells me Page Cannot be Displayed
suggestion
look at the top of the kaiser rom development in the wiki section. it has everything you are looking for
What bilbo said.
Related
Hi all
I am Essam,
I just have an issue when I am trying to upgrade my ROM
I download WM6.1 from the HTC.com and upgrade my older wm6.0
After that I want to change that ROM with a new one (cooked/normal) but every time I try to do this the setup failed and gives me an error message
So I can’t change the ROM at all
Ii have tried diff ROM but in vain
I don’t know what to do i am new in this field plz give me a hand
You need to be alot more specific
1. did you use jumpSPL---HardSPL what version
2. What phone are you using, If a Tilt then the htc rom wont work unless you have done step 1.
3. Did you read how to do this (custom roms)
4. Why didnt you post in the correct section, you should not have even posted a new thread because your answers are in the rom section in the stickys.
Im not trying to sound like a jerk, but you need to read. If you just don't know what your doing then don't.
i did use a HardSPL
and i read how to setup custom ROM and done exactly what i have read
and sorry for posting in the wrong section
Hi,
Hope someone can help.
Been trying to instal Dutty's wm6.5 R12 rom on my touch hd but whatever I try, it just gets stuck at the screen with the bar and stay at 0%.
I have searched the forum and tried almost everything I could find. SSPL HSPL USPL and all won't work.
Anyone have any ideas for a noob?
i doubt if you can find someone who can guide you step by step, i suggest you study more, i was like you before, but i just persevered, unti i was confident enough to flash my first cooked ROM. CAUSENOT ALL BLACKBONE, have the same default factory settings, different stock ROM versions and different spl.it does require time and patience, but in the end this will al l payback.
jigners said:
i doubt if you can find someone who can guide you step by step, i suggest you study more, i was like you before, but i just persevered, unti i was confident enough to flash my first cooked ROM. CAUSENOT ALL BLACKBONE, have the same default factory settings, different stock ROM versions and different spl.it does require time and patience, but in the end this will al l payback.
Click to expand...
Click to collapse
yeah, this realy helps. Why do people bother to reply if they have no awnser.
I mean I have read those guides on the forum and been busy for a week on it now. I know what spl version I have and which version of hard spl i would need and so on. But it just will not open up.
So if there is someone out there that wouldn't mind HELPING me I would realy apreciate it. But just telling me to search better is no help at all. I have searched with all terms I know but haven't found the right soulution by myself. That is why I ask for HELP, not for smart asses.
RainerG said:
yeah, this realy helps. Why do people bother to reply if they have no awnser.
I mean I have read those guides on the forum and been busy for a week on it now. I know what spl version I have and which version of hard spl i would need and so on. But it just will not open up.
So if there is someone out there that wouldn't mind HELPING me I would realy apreciate it. But just telling me to search better is no help at all. I have searched with all terms I know but haven't found the right soulution by myself. That is why I ask for HELP, not for smart asses.
Click to expand...
Click to collapse
look, no one is being a smart ass here. in addition, your description of the the steps you've followed are very vague. my friend, we see 5-10 posts like this every day and in every case, the OP has missed/skipped one or two steps in the flashing process. simply stated, the guides WILL help you flash your device. if as you stated, "SSPL HSPL USPL and all won't work you have to complete this task first. you HAVE to update your SPL before you can flash Dutty's ROM. put your device in bootloader mode and if IT DOES NOT display the following, you will not be able to flash a ROM:
BLAC120 (or BLAC110) 32M
SPL-1.56.01 OliNex
MicroP-BlackStone (LED) v 6
you HAVE to complete this step before you can flash any WM 6.5 ROM. read the guides, make your own easy-to-understand-checklist and follow it to confirm you've completed ALL the steps. be patient and you'll succeed. as a reference, you can use the links in my signature to help you with the process. good luck.
Hi,
I not sure you read the Dummies guide yet.
[TUT] Dummies guide: flashing 1.56+ roms [v 2.0] - [HSPL][USPL]
http://forum.xda-developers.com/showthread.php?t=505377
Troubleshooting - manual SSPL
* Boot up your phone.
* Copy SSPL-Manual-TouchHD.exe to your phone. In a file browser on your phone browse to where you copied SSPL-Manual-TouchHD.exe and run it.
* Your phone will reboot into its bootloader and should show SPL v 1.07.OliNex.
* When it shows USB at the bottom then run HSPLWrapper_blackstone_156OilNex.exe from your computer again.
* Go to step HSPL3 if successful.
Try to follow this step. Copy the file to phone and boot from there. then u should be able to do so.
Hi guys and girls,
thanks for trying to help. I do understand that people like me who are new to flashing a cooked rom will ask many silly questions. I'll try and formulate better which steps I have done.
I noticed on my bootloader screen that I have spl-1.54.0000. I therefor downloaded the file SSPL-Manual-TouchHD.zip and transfered the exe file to my phone memory. I then started it on my phone. It starts the bootloader screen and tells me:
BLAC100 MFG 32M SS-BC
1.07.0liNex XA
MicroP-Blackstone (LED) v6
From hereon I have tried to run USPL but it tells me it cannot connect due to faulty USB drivers which I have updated with the supplied drivers as indicated. Even with a different cable and a different USB port, USPL will not connect.
I have also tried to run the RUU HSPLWrapper_Blackstone_156OliNex.exe but it then starts the screen with the percentage bar and gets stuck. After a few minutes it comes with either error 260 or 262 wicht is an update failure I have read. Just the fix to start over again and reset your systems didn't do anything for me.
Since I know that poeple are able to use this rom I am defenite that it is by my own shortcommings that I can't seem to do it. But after having tried a lot, I can not see what I am doing wrong anymore.
Hope this is a better explenation and thanks sofar already.
Ps: I have tried both USPL3 and USPL5 from http://forum.xda-developers.com/showpost.php?p=3930878&postcount=3. I just can't seem to connect with USPL.
If you run win7 (and vista) x64 especially, loading unsigned drivers for usb doesnt work by default, this might be your problem.
You could try the following, boot you pc and just after the bios is loaded press F8 (or just keep pressing it multiple times) and a menu will appear which includes: "Disable Driver Signature Enforcement" try this, and after boot you should be able to make the usb drivers work, so reinstall them and try uspl (dont forget to not allow usb connections in windows mobile device center)
Hope this helps, if not, move along
RainerG said:
yeah, this realy helps. Why do people bother to reply if they have no awnser.
I mean I have read those guides on the forum and been busy for a week on it now. I know what spl version I have and which version of hard spl i would need and so on. But it just will not open up.
So if there is someone out there that wouldn't mind HELPING me I would realy apreciate it. But just telling me to search better is no help at all. I have searched with all terms I know but haven't found the right soulution by myself. That is why I ask for HELP, not for smart asses.
Click to expand...
Click to collapse
I take exception to this. No need to be a smart a**. Obviously jigners was only trying to help, like others before.
If your having difficulty your queries should be directed to the dummies guide thread where people like myself as well as other expereienced users will be more than happy to help you. No need to create a new thread for queries that have been asked umpteen times before.
Thread closed
I have been trying different roms to try to upgrade my phone to WM6.5 and so far the roms I've tried won't even load onto my phone. The download status bar will come up but it goes nowhere then it says update error. The phone will turn back on and work with the stock WM6.1
I'm just looking for a very clean OEM style WM6.5 ROM. Any recommendations?
ryche316 said:
I have been trying different roms to try to upgrade my phone to WM6.5 and so far the roms I've tried won't even load onto my phone. The download status bar will come up but it goes nowhere then it says update error. The phone will turn back on and work with the stock WM6.1
I'm just looking for a very clean OEM style WM6.5 ROM. Any recommendations?
Click to expand...
Click to collapse
Have you read the Dummies Guide? If not, you should do this. Just try some roms to see what fits better to your needs.
Assuming you hardspl or setup for USPL prior to flashing any ROM's. I have the 8285 and run the following ROM's: NRG LEO, PDAVIET LEO, and MIRI's LEO based ROM's. I personally keep going back to NRG as I have followed him from other devices and like his work. All the cooks are great. I also flash from SD card vs. using Activesync, find it faster and more reliable.
NRG is clean and mostly bug free ? yea from what you're saying maybe I did do something wrong. I'm not too advanced on this, I downloaded the energy rom and tried to update it. I've done nothing previous
ryche316 said:
NRG is clean and mostly bug free ? yea from what you're saying maybe I did do something wrong. I'm not too advanced on this, I downloaded the energy rom and tried to update it. I've done nothing previous
Click to expand...
Click to collapse
well then that's why you're having problems for sure. as others have mentioned follow the Dummies Flashing Guide. if you're using HardSPL, make sure the top (RED) section of your bootloader looks like this Pic of Bootloader with HardSPL. when it looks like this, you're ready to flash a ROM!!
OK I found the 156OliNex.zip file. I put the phone into bootloader mode, when I tried to launch the file it would not execute. It flashes up on the screen for a second and that's it. I made sure that the windows firewall is turned off
Best, the least error, safest flashing tool USPL
i highly recommend you use USPL : I still yet have to see someone who had a problem after using USPL. This is even endorsed by Dutty Throy (you can see that he even states that this is the SAFEST METHOD) - Moderator ROM Cooker par excellence!
look here
http://forum.xda-developers.com/showthread.php?t=505377
and here
http://forum.xda-developers.com/showthread.php?t=462347
format your sd card using fat32 (full format) (if you are a frequent flasher I suggest you get a small capacity sd card – 1Gb - and devote this only for flashing)
rename the RUU_signed.nbh to BLACIMG.nbh and pair this with ROMUpdateUtility -(application file). copy this two files in you formatted sd card.
then using Digital Outcast's USPL GUI: look here
http://forum.xda-developers.com/showthread.php?t=508361
if you're using Vista see this to update your sync driver
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
flash the ROM.
please let me know once you've done this succesfully, i wish you the best of luck!
ryche316 said:
I have been trying different roms to try to upgrade my phone to WM6.5 and so far the roms I've tried won't even load onto my phone. The download status bar will come up but it goes nowhere then it says update error. The phone will turn back on and work with the stock WM6.1
I'm just looking for a very clean OEM style WM6.5 ROM. Any recommendations?
Click to expand...
Click to collapse
You need to start posting in the Dummies Flashing Guide as posted above as this thread will be closed as soon as a mod comes across it. You'll find all your answers and help there
ryche316 said:
OK I found the 156OliNex.zip file. I put the phone into bootloader mode, when I tried to launch the file it would not execute. It flashes up on the screen for a second and that's it. I made sure that the windows firewall is turned off
Click to expand...
Click to collapse
do you have .Net installed on your PC? if not, you need to install first. if you have .Net installed, retrace your steps to make sure you've got everything setup properly, e.g., installing the driver supplied in the thread. also, if you have problems please post your questions in the Dummies thread...the moderators will close threads like this one because "all" the info you need to flash can be accessed from the Dummies thread.
yes I have NET installed on my computer. I tried using the files in the dummies guide and had issues
OK. so I finally got the NRG energy rom installed and it shows up distorted on the screen.
ryche316 said:
OK. so I finally got the NRG energy rom installed and it shows up distorted on the screen.
Click to expand...
Click to collapse
if you're using a WM 6.5 ROM then you do not have the right SPL installed.... look at Post #5 and make sure your bootloader looks like the one in my picture; if it doesn't then you haven't installed SPL 1.56 Olinex. again, please post your questions in the Dummies thread, you'll get appropriate help there... thanks!
I want to thank everyone for their input. I finally got a rom installed and working properly
I just wanted to thank everyone for their ideas and input. I finally got a rom installed and working on my phone
glad to know you were successful! we've all been there before and i know it can be frustrating. patience, diligence and patience (lol) will get you there!
Solution found, thread closed
plz help me i have htc touch pro ,it has 6.1windows,iwana 6.5 windows,[lz any onw help me how to install and where i get tht window,and my second problem iz i cant install softwares of (.exe) how can i install tht file type???plz help me plzzz i nedd urget help
1. Use the search button.
2. Look at the sticky's.
3. Read the rules before posting.
I agree, it seems hard to find a way how to upgrade your windows software to 6.5 or even the new 7.
I find it very difficult to get android yet everyone talks about... there is not website for it..its all hunting which is stupid. Not even torrents have them.
may be u can use 1 of so many roms here, just pick one, and enjoy your new winmo 6.5, if this is your 1st time, may you should read this one
http://forum.xda-developers.com/showthread.php?t=448008
1) Install HardSPL
2) Pick a ROM and follow the instructions
There is an excellent thread in the ROM forum giving step by step instructions. Its a bit daunting flashing the first ROM but after you have done it once or twice its easy
only problem is there are too many ROMs to choose from
... and those pesky chefs keep bringing out updates
Alright ive seriously looked all over the threads and i cant find out how to properly install a rom Ive tried serverl times and nothing works i have a htc pure could some one please point me in the right direction!!!!
Come on dude, the 3rd thread in this forum has the unlocker http://forum.xda-developers.com/showthread.php?t=520312 once thats done then follow the guide at the top of this forum and then flash away any cooked ROMs
Yea.... Ive followed the steps and i keep getting error message about failing to comunicate how do i install the cab ?
Just take it slow and easy....
vtonyv said:
Yea.... Ive followed the steps and i keep getting error message about failing to comunicate how do i install the cab ?
Click to expand...
Click to collapse
Hi vtonyv!
Carefully read through this thread:
http://forum.xda-developers.com/showthread.php?t=520312
The first item on the check list is this file that you need to unlock your phone for flashing custom ROMs:
http://forum.xda-developers.com/attachment.php?attachmentid=232404&d=1254155235
The second item in the checklist states that the phone must be connected via active sync or Center for windows mobile in order to unlock you rphone.
You must do this otherwise you will get a error message like the one you described.
So, take your time and read the WHOLE first thread in the top of my post, and and after that go look around this forum for a nice ROM to try.
I recomend any of NRGZ28 ROMs. They show you what your phone should have been when you bought it.
The easiest way to flash your Topaz is to use the SD-card flashing method.
Please look in this excellent guide how to flash your phone!:
http://forum.xda-developers.com/showthread.php?t=585201
Good luck and just take it slow!!
// ohamn