Hey guys,
I just bought a Tilt and have this 'sim card missing' problem. At times I've been able to get the sim card working but after a reset the problem is there again and no way to fix it.
I've tried putting a piece of paper there and everything but it just doesn't work. Any suggestions?
Using 1.65.24.36 radio and HD_III_Omnia_WWE with a 3.29 SPL....
It's driving me nuts fellas. Please help...
Also a picture of how to place the piece of paper would be appreciated as I have no other solution. Cheers guys
You should have posted this in the older thread.
I'm pretty desperate here mate. All the other threads have a solution which involved putting a piece of paper in there.
I'd like to know where to put the piece of paper(maybe I'm going wrong?) and also whether there are some other possible solutions.
Well then maybe post your question in the thread that has discussed it.
So, some updates.
I've gotten my network to work(which confirms it isn't a hardware issue)...but as soon as I soft-reset it it will say "sim card missing" again....it might be on the 1st reset or on the 3rd etc.
Using L26v12 FULL rom and I've tried 3 radios so far and all have the same problem.
Is it the L26 ROM causing the problem or...?
I don't know if this might help, it's more of a marginal remark to your problem:
When i got my kaiser, stock rom didn't read my sim at all - reason for it was the sim card was older then 2004 (or so).
I got a new one from my provider and it worked perfectly (fairly simple/fast/cheap procedure, at least concerning my provider)
Dunno, but maybe the SIM architecture has issues with different roms, similar to this issue of mine.
Okay, this has been resolved. Today I bought a new SIM card from my provider for $4 and that solved the problem.
You were right brokenlute, it's a compatibility issue between the device and the SIM card. What amazes me though, is why it worked periodically at all?!?!?!
This has been resolved!
I feel much better now
bornwild said:
Okay, this has been resolved. Today I bought a new SIM card from my provider for $4 and that solved the problem.
You were right brokenlute, it's a compatibility issue between the device and the SIM card. What amazes me though, is why it worked periodically at all?!?!?!
This has been resolved!
I feel much better now
Click to expand...
Click to collapse
This is why AT&T will make everyone replace their SIM card if they try to do an equipment upgrade with a SIM older then 24 months.
Probably, no AT&T in Australia though
Related
Hi
I just got on at&T 8925, I put in sim card and it did not ask for unlock code, so I guess it is unlocked, I put in my sim card (Fido Canada,works in other phone) and it show "no service" can not find phone network signal.
I tried
ATT ROM 1.57.502.2 and
RUU_Kaiser_ROGERS_WWE_1.83.631.4_radio_sign_22.51.88.13_1.27.15.32R_Test.exe
radio 1.27.12.11 and 1.27.15.32
all same problem.
Can anyone help me, are these rom combinations not good? or something wrong with the device?
or anything I need to do?
thank you for your help !
Try another known-good SIM card. If you still cannot get service, then you probably have a hardware issue with the phone.
Sounds stupid, but did you make sure you put the SIM in the right way around.
You wouldn't believe how many people have not done this right.
Sounds like it's not unlocked... when I got mine it wasn't unlocked but it only asked for a code once.... just run the unlocker to be sure...
maybe to hard reset?
Hi thanks for everyone's help.
I think I put the sim card the right way , otherwise it will show 'no sim card'
I am keep trying other rom/radio; still no luck, it either keep searching or say 'no service'
I really hope it is not hardware problem.
hope if anyone has the experience and could help me
it really confuse me.
Thanks
alanalan11 said:
Hi thanks for everyone's help.
I think I put the sim card the right way , otherwise it will show 'no sim card'
I am keep trying other rom/radio; still no luck, it either keep searching or say 'no service'
I really hope it is not hardware problem.
hope if anyone has the experience and could help me
it really confuse me.
Thanks
Click to expand...
Click to collapse
welll this might be a little solution i read in another thread...sum times the phone will not read the sim becuz its not making enough contact to the phone...so maybe a little piece of paper on top of the sim then put it in the phone MIGHT help..if it doesnt then ur phone is jacked up =P
or
when i put my tmobile sim in my unlocked 8925 it worked and then a couple our couldnt get n e service... and i checked my brothers phone and dad and they didnt have service too... so maybe sumtimes the network will nto work for a while. or sumthing
If you go in the phone options and do a manual network search, does it find anything?
Thanks brian_v3ntura:
but I tried paper, same thing, maybe not be contact problem.
Thanks kilrah:
I tried that, it shows " cannot read setting from network, try viewing setting later or disconnect data connection and try again."
I did saw something online that maybe because the Fido sim card maybe old (about 3 years), but it did work with sth. like Samsung blackjack II. maybe Kaiser is more complicated.
just wonding if anyone have experience that old sim card may have problem with new phones.
I will keeping trying...
My SIM card is about 4 years old.
I'd bet your Kaiser has a hardware problem.
Hi, guys
I tried a friend's Fido sim card, it works, I don't what's the difference, but it is just like that, maybe I should go get a new card.
Thanks everyone.
good
as one of the boys ur sim might be damaged/old (power failure issues most likely)
alanalan11 said:
Hi, guys
I tried a friend's Fido sim card, it works, I don't what's the difference, but it is just like that, maybe I should go get a new card.
Thanks everyone.
Click to expand...
Click to collapse
yeah, just what confused me is that the sim card still work with my other phones.
Hey guys,
Long time lurker here... and I'm having the same problem.
I have a foreign (Cyprus CytaMobile Vodaphone) SIM in my Kaiser. A couple times over the last few days I was getting the "no service" but if I reset (turn on/off) the device it was fine. Today I cannot get service on it at all. I tried it in an unlocked 1G iPhone and it didn't seem to work either.
I thought maybe the SIM is dead, however when the device it's in starts up, it asks me for the PIN set on the SIM card. I enter the PIN, and it unlocks the SIM. How could the SIM be dead if the PIN authenticates? However, when I put my regular Canadian Rogers SIM in, it works fine.
Where it usually says "Searching.." on the home screen, I once got "Denied, searching.." but I haven't been able to reproduce it.
Any ideas? The provider doesn't have a local roaming agreement, however for the past year it has always registered on the network and allowed me to check balance and send text messages.
Is it most likely a dead SIM or blocked by Rogers? I'm doubting the blocked part, but the successful PIN entry is what has me baffled...
Thanks!
Chris
Ok different SIM card also from Cyprus Cytamobile in a SE w810 does the same thing. Is Rogers seriously all of a sudden blocking these? There is no local roaming agreement, however I would always get the Rogers welcome text's and even be able to check balances. I've been doing this off and on for 4 years...
Anyone ever heard of something like this?
Thanks,
Chris
P.S. Sorry, getting a bit off topic but I thought the initial problem was related!
EDIT: Ok, I can also see all the SIM contacts and SMS messages stored on the SIM.
alanalan11 said:
Hi
I just got on at&T 8925, I put in sim card and it did not ask for unlock code, so I guess it is unlocked, I put in my sim card (Fido Canada,works in other phone) and it show "no service" can not find phone network signal.
I tried
ATT ROM 1.57.502.2 and
RUU_Kaiser_ROGERS_WWE_1.83.631.4_radio_sign_22.51.88.13_1.27.15.32R_Test.exe
radio 1.27.12.11 and 1.27.15.32
all same problem.
Can anyone help me, are these rom combinations not good? or something wrong with the device?
or anything I need to do?
thank you for your help !
Click to expand...
Click to collapse
I also have the same problem with my tytn, I have a bad feeling it is hardware If you manage to find the problem please let me know. I have tried the paper thing and also all new firmware and OS nothing helps
Try setting it to GSM only (disable 3G) and see what happens.
To do that go to Settings->Personal->Phone->Band->Network Type=GSM.
If it works then, you might want to read this thread: http://forum.xda-developers.com/showthread.php?t=419803
Can't figure out why. It's unlocked and I just took it back to factory settings.
For some reason it just stopped recognizing my SIM. Anything I can try? I would hate to assume it's broken.
Assuming you've searched the forum...
does the sim work on other phones? does another sim work in your kaiser or it doesn't recognize ANY sim?
have you tried cleaning the sim bay? (i dunno whats the recommended way to clean that area or even if cleaning it will make any difference)
and one more time...search this forum...i remember seeing quite a few threads about sims not getting recognized all of a sudden
My SIM works in other phones, but nothing works in this one.
I did search, but only found issues with the phone not reading it after flashing to a cooked ROM, not official ones. It didn't recognize it before or after I flashed to back to factory.
** I saw where apparently tmobile sims require a little more pressure, but that hasn't worked.
I've tried three different SIMS, one on tmo and one on att
So no one else?
similar issue !!
similar issue with gene(HTC 3400i)....
sending it for a replace tomorrow, but i will be thankful if somebody can advise a solution for this issue.
Have a look at this thread for a few ideas:
http://forum.xda-developers.com/showthread.php?t=423724
ideas
try cleaning your sim card with medical alcohol it help in some cases
ask for sim replacement from your network provided (from experience and reading - kiaser is very sensitive to sims)
Someone posted about this last month and his solution solved my problem.
Slide a piece of paper between the top of the SIM card and the top metal clip to push it down harder onto the contacts.
In my case some SIMs would not work, but this has cured it.
Alright, new to the forums so please bare with me! Here goes:
A little while ago I started getting the "Sim Card Is Missing" error on my Kaiser. I've done many things to remedy the problem and still to no avail, the problem remains. What I'm looking for is any advice or any other ideas that someone might be able to give me on this problem. Here's a list of what I've already done.
-Replaced SIM with a brand new SIM from ATT Dealer.
-Dissassembled phone and cleaned SIM contacts as well as SIM socket connector.
-Soft reset, and soft reset, and soft reset......you get the idea.
-Wedged a piece of paper, then cardboard on top of SIM to make more pressure
-Disabled 3G network, run solo on EDGE/GPRS, as well as used outdated SIM to see if that would solve the problem.
There have been a few other "everything else's" that I've probably tried, but nothing worth mentioning.
All of these different things I've done have all solved the problem for a small amount of time (1 minute-a full day), but the problem keeps coming back. Typically after taking the SIM out and restarting my phone, the phone does work for about 15 minutes, and then ceases to live.
If anyone, anyone at all has any insight or suggestiong, please post back in this thread, your help is much appreiciated. I've already taken the phone to a repair shop and got ripped off $160, so I'm at my last rope here. Thanks all!
Dig Life!
D
the sim card is missing probably the best solution
i have had this problem before on a wizard and a kaiser too what i found out on both phones one bought off ebay and the other i bought 2nd user from the local paper is that one of the phones was reported stolen (not saying that yours is) and that is what comes up when the imei has been switched off the network and the wizard i found out had an imei which had been changed. the solution i found is when i used the wizard service tool to change the imei on the phone with one on an old phone what i had to see iuf that would work, the sim card missing error disappeared and that fixed the problem so i do reckon that has something to do with your problem.
p.s. changed the imei number back to what it was as its sort of illegal to change imei`s lol
regards
hacka 1010
The Kaiser (at&t tilt version at least) is notorious for having a loose fitting Sim socket. If your SIM has any age to it the contacts are worn.
Put a piece of tape (or two on the back to thicken it) then reinsert it. If this fixes your problem get a new SIM from your carrier.
i've try to find similiar problem and i can't find the answer...
guys my kaiser can't read my sim card
i lose it when i use android, so i use wm 6.0 again...
the signal got well for one night, but since this morning it never read my simcard...
i've use mtty, change radio, use wm 6.1, wm 6.5 and it still can't read my simcard...
can anybody help me with this problem??
about my english please forgive me, i'm still learning...
thanks guys for your help...
Hey, I can't really help you. But the same has happened to me a few times: every time, it eventually started to work again after some time. Could be a few hours, could be a week - so be patient. I have no idea what the problem is, but at some point it started working again after I put someone else's SIM in my phone then switched back (both SIMs were of the same provider). Good luck!
you are not alone
I have exactly same problem with you.. since 2 days ago my kaiser won't read any sim card.
Actually it had happened a few weeks ago, my kaiser fell from my hands and hit the floor. After that, my kaiser stop reading sim card, but after one night it started to works again just like Cerberus_tm said.
2 days ago it happened again I really careless.. but this time until today, my kaiser still won't recognize any sim card.
I have done some reading in a few old thread about this case. I'm not sure myself but based on those thread, I can conclude that the problem could be because of the sim card doesn't make contact with card holder, or there is a problem with the flex cabble that connecting our sim card holder.
FYI, if you are interested in fixing the flex cabble, the price is about 700.000 IDR here in bandung.
-Rif- said:
I have exactly same problem with you.. since 2 days ago my kaiser won't read any sim card.
Actually it had happened a few weeks ago, my kaiser fell from my hands and hit the floor. After that, my kaiser stop reading sim card, but after one night it started to works again just like Cerberus_tm said.
2 days ago it happened again I really careless.. but this time until today, my kaiser still won't recognize any sim card.
I have done some reading in a few old thread about this case. I'm not sure myself but based on those thread, I can conclude that the problem could be because of the sim card doesn't make contact with card holder, or there is a problem with the flex cabble that connecting our sim card holder.
FYI, if you are interested in fixing the flex cabble, the price is about 700.000 IDR here in bandung.
Click to expand...
Click to collapse
700.000 IDR???
ithink i just wait till it works again.... teu boga duit euy....
Fixed my sim card no work issue
It was intermittently working so I knew I was close and yes the poor Tytn II 8925 has been dropped about 1/mth thanks to the stupid sprint magnet case that always seems to let go after I get up from a chair. I tried raising the gold contacts that touch my sim card, that did NOT work. I tired putting one layer of masking tape on my sim card, that did NOT work either. I even got a new sim card from my carrier $10, that did NOT work. Finally I tired pushing down on the steel house that holds the sim card, that worked!
Just put a piece of paper on the back of sim card while inserting it into the sim holder, my kaiser suddenly started acting like this, I slid a piece of paper at sim's back and now its working pitch perfect
Sorry Sim card error back (not fixed)
Seems to work after battery removal and 3 restarts, getting ready to dump the phone.... It works for a couple of hours, then all of sudden sim card can't be read....can't live like this.
dzhnbw said:
Seems to work after battery removal and 3 restarts, getting ready to dump the phone.... It works for a couple of hours, then all of sudden sim card can't be read....can't live like this.
Click to expand...
Click to collapse
perhaps by way of radio uprgade you can handle !! You can get more information at http://forum.xda-developers.com/showthread.php?t=393182
perhaps try reinsert the sim module if you are ok to open the device up? or replace the simcard module flex cable
My devices sometimes cannot read the sim card, and some times it can. No matter what sim I use, what ROM I use, and I've even tried another sim card reader, but the problem seem to be something else.
Anyone experienced this?
I've been looking for a way to emulate a sim card, like a soft sim solution, but it seem this is not easy..
Maybe it's time to let the old m7 retire...
Anyway, thanks to all contributors in this community, it's been awesome. Merry Christmas and a happy new year.
rbrandser said:
My devices sometimes cannot read the sim card, and some times it can. No matter what sim I use, what ROM I use, and I've even tried another sim card reader, but the problem seem to be something else.
Anyone experienced this?
I've been looking for a way to emulate a sim card, like a soft sim solution, but it seem this is not easy..
Maybe it's time to let the old m7 retire...
Anyway, thanks to all contributors in this community, it's been awesome. Merry Christmas and a happy new year.
Click to expand...
Click to collapse
Maybe the sim card isn't making a good contact when inserted in the tray, A few ppl got a similar issue and used paper to shim the sim card (not recommended since your sim tray can get stuck). I would try another sim first...
alray said:
Maybe the sim card isn't making a good contact when inserted in the tray, A few ppl got a similar issue and used paper to shim the sim card (not recommended since your sim tray can get stuck). I would try another sim first...
Click to expand...
Click to collapse
Yes, that's a common issue. The first steps was to use a little tape on the sim, second step was to try another sim, third step was to open the device and take out the sim reader, clean it with ethanol, check every pin and so on, then I tried another sim reader, but the problem still remains.
I too have the same problem, of signal on and off. I think the device detected the SIM card as it asked for PIN to unlock. I tried the *#*#4636#*#* to choose WCDMA only / preferred, but still same problem. So, did you retire the beautiful phone of yours?
cryptosporidium said:
I too have the same problem, of signal on and off. I think the device detected the SIM card as it asked for PIN to unlock. I tried the *#*#4636#*#* to choose WCDMA only / preferred, but still same problem. So, did you retire the beautiful phone of yours?
Click to expand...
Click to collapse
Since not even replacing the sim reader solved the problem, it can no longer be used as a phone.
And anyway, the battery is getting seriously old, so when my dogs destroyed my remote control, the good old HTC one m7 now have a new life, filled with joy and happiness.
Anymote app is nice, and m7 are now a media control hub in my living room.
Since April 29 2013 this device have improved my life quality, with the good help from this great community on XDA.