Please Remove this tread - Touch Diamond, MDA Compact IV General

Since yesterday I have a problem with my HTC keyboards.
All 3 options, Qwerty, Compact Qwerty and the phonepad only gives me numbers.
I have tried all the settings.
It does not make a diverence if i turn of T9.
On the keyboard i can see the nummbers and the letters.
This is very irritating, can somebody please help?
Or is there an original cab version, al the cabs i can find are Qvga.
I have tried the Touch keyboard and it gives letters in stead of numbers, but its Qvga.
Thanks

Related

Diamond Keyboard problem

Hi,
I don't know what I've done, but when I'd like to write some message, or whatever, the original keyboard (full qwerty, or compact qwerty) keyboard starts up with the symbol pad and it's not possible to switch it back to alphanumeric mode. The only way is to invoke keyboard switch menu and select the same keyboard again. then it works as usual. Does anybody have the same problem?
as I said, I don't know, what I've done, or installed, bud I think, I've installed Advanced config 3.0 recently
I have the same problem... I also don't know what is wrong.
I also tried to disabled T9 with some tricks... that's all...
Some suggestions??
Thnx
Since yesterday I also have a problem with my HTC keyboards.
All 3 options, Qwerty, Compact Qwerty and the phonepad only gives me numbers.
I have tried all the settings.
It does not make a diverence if i turn of T9.
On the keyboard i can see the nummbers and the letters.
This is very irritating, can somebody please help?
Or is there an original cab version, al the cabs i can find are Qvga.
I have tried the Touch keyboard and it gives letters in stead of numbers, but its Qvga.
Thanks
Same problem here on the CDMA Diamond, I tried two different ROMs already the Sprint Stock ROM and a Telus Custom Juicy's 2.0 ROM. I can't use it at all and I hate doing a Hard Reset. Someone shed some light on this please.
Same problem here, have tried everything
Well I solved the problem by uninstalling PCM Keyboard... Too bad, I really liked it
Does anybody know if it's possible to run pcm keyboard without having this issue on the diamond?
since day 1 my keyboard did not show predict text ? anyone can help me ?
I had the same problem , it appeared from nowhere ..
After also trying different tricks , i solved the problem using Resco Keyboard
Pro ... It also responds much better to my taste with the touch screen
interface of the diamond.
I have had this problem on the Touch Pro too having used PCM keyboard.
Unistalled it and all back to normal.
Pity.
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
chris2.0 said:
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
Click to expand...
Click to collapse
How do you use copy & paste with PCM? Which version of PCM keyboard are you using?

Dialpad instead of QWERTY possible???

HI guys,
hit on me but I would like to have the dialpad instead of the QWERTY for messaging. Is this possible or is there already a rom/ tool to realize this?
Thanks
Michael
There is a program on here (can't remember the name!) that alters the SIP dependant on whether you have the stylus in or out. I have mine set to Phone keypad when in and Qwerty keyboard when out
burnso
OK, just found it by myself.
ok share
Share It Please

normal qwerty keyboard

I am wondering if anyone is good enough to help me.
I have got the chinese diamond recently, but there is not a "proper"qwerty keyboard available. It only has a T9 qwerty and it is a right pain in ass when you want to write shorthand or slang!!! Has anyone got the normal keyboard for me to download into the little dime to make my life easier?
Appreciate any help available!!
i just turn T9 off...
i know that is the simpliest way, but it still leaves me with a problem where the input of the i have to press 1-3 times to get the correct letter - like the "phone keyboard" or the "compact qwerty" keyboard.
It is 1 button shared with 3 letters. I need a keyboard where it is 1 button to 1 letter. Sorry...
You can download the normal QWERTY keyboard for your chinese diamond in HK's HTC-eclub. Just visit HTC website and you could get it.
cheers!! i check it out!!! thankalot!!

Phone style keyboard fix

is there a fix to allow my phone styled keypad and compact qwerty to write letters instead of numbers. Even if the letters are selected. This makes it extemely hard to write texts when one the move as i have to use the full qwerty which now does not wish to return to letters, after inserting a new contact!
so far i have tried swithcing keyboards back and forth and a soft reset. is there a CAB to update this keyboard or anything like that.
I have tried searching but the search function returns pretty much every post with the word keyboard in it which isnt too handy!
cheers
Aaron Neal
i've had that problem with the diamond keyboard installed on my touch pro, and all i did was switch to the standard windows keyboard, and then back to the phonepad and it works fine. if you need to, you could reinstall the diamond keyboard, its on here somewhere in this forum.
ou2mame said:
i've had that problem with the diamond keyboard installed on my touch pro, and all i did was switch to the standard windows keyboard, and then back to the phonepad and it works fine. if you need to, you could reinstall the diamond keyboard, its on here somewhere in this forum.
Click to expand...
Click to collapse
i have been looking, but like i said i get every single return of 'keyboard' in the search!

Finnish/Swedish keyboard layout for HTC Touch Pro

Hi.
If you need Finnish or Swedish keyboard layout for your Touch Pro download it here.
Install to device -> soft reset.
- ä = Fn + a
- ö = Fn + o
- å = Fn + p
IMBA! ill try it out now
Thats for t9. It does not help making the Hardware keyboard make åäö.
Im using Nrg Rom and if your nor suplied with the swedish flies this does not work...
t9 works fine thoe. but nothing allse.
The hardware keyboard is a easy regedit to make it swedish,
HKLM\HARDWARE\DEVICEMAP\KEYBD\
Change CurLang to 1044 and softreset for swedish hardware keys.
your not lissning. even thoe i do that with the nrg rom you still dint get the åäö to show upp! like i said. in all the software modes when using the screen too klick it works without a problem.
But as soon as a switch over and open upp the hardware keyboard it will not typ åäö. If i do Fn + O for exampleall it does is make a normal o...
no problems for me using the same rom, you did install the touch pro keyboard cab right?
jimmyhawkin said:
your not lissning. even thoe i do that with the nrg rom you still dint get the åäö to show upp! like i said. in all the software modes when using the screen too klick it works without a problem.
But as soon as a switch over and open upp the hardware keyboard it will not typ åäö. If i do Fn + O for exampleall it does is make a normal o...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=430208&highlight=hardware+keyboard
And use this tool to change the layout from a fuze rom keyboardlayout, to a "htc" rom keyboard
Or my newest creation: http://forum.xda-developers.com/showthread.php?p=3512681
Hi there m8. Even with your program it still does not help me. If you open upp my Phne and start using my Hardware keyboard with the nrg rom it wont make Ö when i do FN + O....
I just get a normal o.
So im not doing anything wrong and what it seems is that everyone does not understand that this is not the REGISTRY that is the problem. Or if the keyboard is set to fuzz or HTC keyboard.
It seems as if the Swedish files are not in Nrgs rom so ÅÄÖ wont show no matter what registry fixes you do.
So i think that what is needed is the Swedish files in order for this to work. NOT any registry fixes... Do you understand my problem now?
Cause i used your program. I have tried about 5 diffrent regfiles witch realy does about the same thing
and as i see your program is allso just a reg changer that changes the curlang 2 = 41d
Witch beliave me or not its set 2 and i still only get a o when typing FN + O witch should then become a Ö
what version of the nrg rom are you using?
i have ran 1.5, 1.6, 1.7 and 1.0 (1.8) and all of them are fully capable of running the Swedish hardware keyboard.
install the touch pro keyboard cab located in the nrg rom thread softreset, change curlang to 1044, softreset and thats it.
Im not sure what files you are after, i can´t recall that i have ever read about any language files for the hardware keyboard, T9 yes not not hardware keys.
if you are running the 2.x series im am fully willing to flash my rom and try the exact same think since im confident that it will work.
Please answer this question:
Did you or did you not install the touch pro keyboard cab for the nrg rom?
Use 2.0 and used the keyboard changer thats in the rom.
???
Hi.
I have used that cab with almost every EnergyROM version there has been (including betas) and that cab has always worked fine. I also tried one 6.5 version and this cab was not working with it - allthough, I did not try very hard...
Things I do:
- change regional settings -> Finnish
- change keyboard layout to Touch Pro
- install the cab
- soft reset
=> now it should work...
@6sto
Tried to do exactly what you wrote, but without success.
I am using EnergyROM Series 2.0 Build 32409
Ouch
Sorry to hear that it didn't work. I apologize but I can't help you any more with this. I hope we have much better helpers here in XDA-developers. Can you help with this issue? Everything is working OK with my Touch Pro!
---
Hey, have you tried this? http://forum.xda-developers.com/showthread.php?t=496876
I figured it out.
The danish keyboard layout and norwegian is the same. So if I choose norwegian it works
not sure what to say, just flashed the latest nrg 2.0 as i promised, changed keyboard with the provided tool, power cycled like i was prompted to do, changed curlang to 1044 and softreset, and now i have my Swedish hardware keyboard.
Do you realy have ÅÄÖ visual when typing FN + o on the hardware keyboarD? i failt do think you do that. on t9 yeh. but not on the hardware keyboard.
And with Nrg rom 2.0 i changed to nor fin swe dk well all but still when typing fn+o i get = o.
And used the keyboard program so its Htc keyboard and not fuzz. Nothing will do it it seems.
jimmyhawkin said:
Do you realy have ÅÄÖ visual when typing FN + o on the hardware keyboarD? i failt do think you do that. on t9 yeh. but not on the hardware keyboard.
Click to expand...
Click to collapse
Yes, i dont use T9 at all, only hardware keyboard.
Please write in detail what you are doing after you hardreset your device.
follow the steps like both i and others have written in this thread, dont skip any steps and it will work for you.
jimmyhawkin said:
And with Nrg rom 2.0 i changed to nor fin swe dk well all but still when typing fn+o i get = o.
And used the keyboard program so its Htc keyboard and not fuzz. Nothing will do it it seems.
Click to expand...
Click to collapse
you do change the regkey to 1044 in decimal value and softreset after you change the keyboard layout to touch pro right?
in the 2.0 all you need to do is change to touch pro keyboard and then change curlang to 1044 decimal value and softreset, that is it.
im not sure how to help you, i even flashed the 2.0 to test it for you, no problems at all, i honestly suggest you start looking at what you are or are not doing compared to the guides.
Follow the guides we wrote for you and it WILL work.
Good luck.
It is acualy as you say. If you direcly after installing the rom do as you say it will work. BUT here comes the tricky part.
What if you want both the hardware keyboard to work. And the t9?
Cause id realy like to have the phone as it is in the swedish vertion. Were both are working.
Cause as of now i know how to get either t9 or hardware keyboard working but not both.
Anyone that knows a solution to getting the t9 in swedish when you have hardware working?

Categories

Resources