Camera driver messed - Tilt, TyTN II, MDA Vario III Themes and Apps

Hi,
Ok, I know it's not the good way but...
I have upgraded my kaiser to a new ROM 6.1 from 6.0.
I messed the registry and I have a simple issue.
When I launch the Camera I have no image on the screen but the camera is working.
Is there somebody who can grabe the right registry keys to put it back?
TIA

romualdrichard said:
Hi,
Ok, I know it's not the good way but...
I have upgraded my kaiser to a new ROM 6.1 from 6.0.
I messed the registry and I have a simple issue.
When I launch the Camera I have no image on the screen but the camera is working.
Is there somebody who can grabe the right registry keys to put it back?
TIA
Click to expand...
Click to collapse
Which keys? The whole Hive, just HKLM, or what?
Dave

I dont' know which key is corrupted. The camera is working and the display also except that when I launch the Camera application I have a black display, I don't see the picture before taking it.
So, let's say the whole.
Thanks

Did you mess with the registry or the ROM upgrade messed up the registry ?
If it's the first solution try re-flashing .

Are you using a WM6.1 ROM now, your Radio in your sig is for WM6.0?
If so, flash a new WM6.1 Compatable radio (list in my sig).
Ta
Dave

My sig is not updated.
I messed with the registry...
Well, I merged my old registry with the 6.1. Everything is working except this. Pretty sure that I messed one key, the one which is doing the link from the camera to the screen since the screen is black but I have all the button and can take a picture. Pictures are taken too.

Check out the nadavi camer thread and download the camera cab that DOES NOT include the camera fix. The black screen issue is documented in that thread fairly well. To my knowledge, no one has found a fix for the black screen issue aside from installing the aforementioned cab. I bring this up because the cab might fix your registry entries for you.

Hum, thanks for the help.
I had installed the fix on the 6.0.
After putting back my backup on the 6.1 with the registry merged, the fix was still there.
I have uninstalled the fix and.... voila, it's working again.

Related

Here is a TMO Wing Original ROM with TouchFlo added

Here's the TMO Wing original ROM with TouchFlo added. After the screen alignment, the TMO customization app will run but it doesn't install anything. Give your phone some time to initially startup after the install before trying the TouchFlo. Use at your own risk. Thanks to the PDAVIET team for the install process, anichillus for the kitchen And I think??? Tom Love ??? for the TouchFlo process itself. If I've used something of someone else's. I'm sorry, let me know and I'll remove it.
http://rapidshare.com/files/55254155/Wing_OEM_With_TouchFlo.zip
foltz61 said:
Here's the TMO Wing original ROM with TouchFlo added. After the screen alignment, the TMO customization app will run but it doesn't install anything. Give your phone some time to initially startup after the install before trying the TouchFlo. Use at your own risk. Thanks to the PDAVIET team for the install process, anichillus for the kitchen And I think??? Tom Love ??? for the TouchFlo process itself. If I've used something of someone else's. I'm sorry, let me know and I'll remove it.
http://rapidshare.com/files/55254155...h_TouchFlo.zip
Click to expand...
Click to collapse
the linky is broke ...
watcher64 said:
the linky is broke ...
Click to expand...
Click to collapse
Fixed. Thanks
this is specially made for the wing?
Smilez_c said:
this is specially made for the wing?
Click to expand...
Click to collapse
apparently so ... the files downloaded are "WING OEM with TouchFlo"
mmm I'll have to try it later cuz right now i have the Touch-IT,WWE v1.1 UPDATED 10.09.07 I wonder if any significant difference
ok guys im giving it a try.... wish me luck ...
zacwhite15 said:
ok guys im giving it a try.... wish me luck ...
Click to expand...
Click to collapse
good luck............
Bad luck so far ......
looking at a bootloader screen and nothing else ...
foltz61 said:
Here's the TMO Wing original ROM with TouchFlo added. After the screen alignment, the TMO customization app will run but it doesn't install anything. Give your phone some time to initially startup after the install before trying the TouchFlo. Use at your own risk. Thanks to the PDAVIET team for the install process, anichillus for the kitchen And I think??? Tom Love ??? for the TouchFlo process itself. If I've used something of someone else's. I'm sorry, let me know and I'll remove it.
http://rapidshare.com/files/55254155/Wing_OEM_With_TouchFlo.zip
Click to expand...
Click to collapse
I will try this rom now. But I still think that it is only included the TouchFlo, not the others app?
Is it possible if you cook a new rom based on the Wing OS like the version HERALD_WM6.0_4.17.07.12.PV? I have tried the Touch IT already but it could not compare with the .12.PV in general.
The biggest problem now is keyboard of Wing, it is different than 4350's keyboard. So if we can get the new rom with Wing OS, it is the best!
Thanks in advance!
Downloading now :] from the wifi across the street, this might take a while...
Please post asap guys how this works.
There are several questions I have:
Does this include ANY extra software?
if it doesnt include ANY, then is there a TF manager at least like touchflo 1.1?
Does this have the 6mb page pool applied to it?
It's the base tmob ruu, with touchflo. not bad but still way up on the mem usage since its the official ruu
i got it to install okay but i can't get touchflo started. there are no tf settings. it replaces the left soft key. some of the issues i read about before are apparent like clicking the "x" opens the right soft key.
reinstalling something else. GREAT JOB though and thanks for making this. i'll check it out again next release.
TF Settings are in the Programs Folder. It has the original page pool but, the quick page pool changer will still work. One thing I did notice though, the TF settings aren't checked but it does work for me. If it's not working, open the TF Settings and check 'Enable cube' and 'Enable Scroll'. Also set 'View mode' to 'TF default v4.1'. I'd hate to slim down the ROM and have it missing something that a lot of people use. If you want to customize the cube, open \Windows\BioTouch Settings. I will definitely be fixing a few things so post suggestions here. Don't expect any changes until next week though.
i couldn't find the settings dialouge in any folder. i went into the programs folder where all the programs are usually located (in the start menu) and then into all the subfolders, and couldn't find the settings. They were also not in the program files folder that i reached through file explorer.
Strange. it's all there for me. When I get home I'll flash back to the original RUU. Then reflash my version. Thanks for your input.
Almost the T-Mo ROM with Touch settings
Well it's almost what it says it is. Everything is there except for the basic T-Mo apps like Hotspot log-in, T-Zones and My5. Which isn't a bad thing becuase I don't use any of them, however it is the missing IM program, but again no big deal because that's available in th the forums here. All in all, so far I'm impressed.
is the keyboard layout correct??..other then that there will be no other reason to switch because some how i kept all my t-mobile files when i flashed to the touch it rom
Just a question. When i reflash, i normally cut out the customizing part. Is the touch-flo function a component of the "Customizing" function after a hard reset?

6.1 camera cab?

Anyone have a way of installing the "default" 6.1 camera app? I was messing around with some of the other camera versions, and would like to go back to the "stock" 6.1 camera, but can't locate the cab file for it...I'm pretty sure it's on the device as a cab, but don't seem to be able to locate it.
I do not know if you still need it, I didn´t see your post before, here I have a cab of Nadavi, if it is what you are loocking for, congrats to him.
Nadavi_OLD_HTC_Camera_5_0_4_2915_00.cab
Nadavi_HTC_Camera_5_0_4_2915_00_NEW_HTC_FIX_2_.cab.html
I've got problems with this
Nadavi_HTC_Camera_5_0_4_2915_00_NEW_HTC_FIX_2_.cab .html
When i turn on the camera then i see a black screen, only with standard buttons but the background is black...But when i take a photo then.. The picture is showed on the screen !
Before i installed this drivers was everything ok.[ With OLD version of "5.0.4" ]
Sorry for my poor english..
mathouse said:
I've got problems with this
Nadavi_HTC_Camera_5_0_4_2915_00_NEW_HTC_FIX_2_.cab .html
When i turn on the camera then i see a black screen, only with standard buttons but the background is black...But when i take a photo then.. The picture is showed on the screen !
Before i installed this drivers was everything ok.[ With OLD version of "5.0.4" ]
Sorry for my poor english..
Click to expand...
Click to collapse
If you go to the official thread and read the last page of posts, you'll see that using the cab with the "Fix" is not recommended. Simply use the regular 5.0.4.2915.00 version and you'll be fine.

Butler - new features

Hi there,
I just picket up the code of butlef app made by siggie1970
Butler - Using capacitive area as stroke launcher and many more features
Original thread: http://forum.xda-developers.com/showthread.php?t=464611
I decide to put some new features like layout change on keyboard slide out. It is useful for stoping SIP poping out. You can point to nullkb or any other layout.
Setings available in registry by any registry editor or by AdvancedConfig (configuration file and only Butler section for config file below)
New features added:
1. Feature lets you to set keyboard layout on keyboard slide in/out.
defautl values for IN - Full Qwerty, for OUT - nullKB. Configurable via registry keys:
EnableSIPChangerKbd
KbdInSIP
KbdOutSIP
2. (Butler1.2) After slide in (in my Rom) some services or apps ?? sets back the Compact layout. So double check added to butler - if after slide in 2sec keyboard was changed to something else but not the KbdInSIP, butler sets it again, otherwise no action performed.
that's more like it! I'll check it out after my ROM release, I'm currently building it right now
Thanks linuxis,
I'll test the new slide function. Wondering what wil happen happen when the keyboard is slid out and I pull my stylus out
I'll also let you know if the errors are still there if there is no HKCU\ControlPanel\Profiles key and value like Noonski pointed out. Might wanna include the settings in the cab.
Cheers,
/Cacti
le_cactus said:
Thanks linuxis,
I'll test the new slide function. Wondering what wil happen happen when the keyboard is slid out and I pull my stylus out
I'll also let you know if the errors are still there if there is no HKCU\ControlPanel\Profiles key and value like Noonski pointed out. Might wanna include the settings in the cab.
Cheers,
/Cacti
Click to expand...
Click to collapse
Good idea about "HKCU\ControlPanel\Profiles" Next release...
i have the old one
does this one let you use both sip change from stylus and keyboard? cause that was pretty much the one missing feature or is it just keyboard now?
and if i install this cab will i gotta redo all the links and such. aaand is there any settings or same reg edits only?
lbhocky19 said:
i have the old one
does this one let you use both sip change from stylus and keyboard? cause that was pretty much the one missing feature or is it just keyboard now?
and if i install this cab will i gotta redo all the links and such. aaand is there any settings or same reg edits only?
Click to expand...
Click to collapse
Yes, it lets you to change both. Separate registry keys for configuration.
No setings - you can use AdvancedConfig or registry editor. I thing that setings
is not used often and application would be bigger and more complex. So no plans for setings.
After install it will overwrite registry setings. If you want to keep old ones - save.
i had added the settings into advanced config for the old version
are you able to see the new feature of keyboard out sip setting in there? i only see the old settings so far
(and what is the number letter code for nullkb? thanks) im an idiot i searched around the interweb finally got the code then went to edit the setting and realized it was arleady set to nullkb blah but great job with the update coudlnt be happier
I had tried to use Butler with NATF ver 4.1 and it frooze the phone at the reboot screen. I had to do a hard reset, do you know if this version has the same issue?
Yup it does on certain roms. I have bo idea why some roms do and some roms dont have the problem.
Advice would still be to always make a full backup of your rom before installing this program!
Cheers,
Cacti
le_cactus said:
Yup it does on certain roms. I have bo idea why some roms do and some roms dont have the problem.
Advice would still be to always make a full backup of your rom before installing this program!
Cheers,
Cacti
Click to expand...
Click to collapse
No idea also. Mine device with ROMeOS 1.51 works fine.
One slite issue - if butler was initialised in portrait mode after slide out/int keyboar changes to one you've configured, but after few seconds it changes to compact qwerty .... if you initialize with keyboard slide out/in keyboard changes to what you've configured and stays (as it should be).
I've investigated that issue shortly, so no idea where is the issue. But I will.
It seems that not the butler changes to the compact kdb.
Does anyone has the same ??
linuxis said:
No idea also. Mine device with ROMeOS 1.51 works fine.
One slite issue - if butler was initialised in portrait mode after slide out/int keyboar changes to one you've configured, but after few seconds it changes to compact qwerty .... if you initialize with keyboard slide out/in keyboard changes to what you've configured and stays (as it should be).
I've investigated that issue shortly, so no idea where is the issue. But I will.
It seems that not the butler changes to the compact kdb.
Does anyone has the same ??
Click to expand...
Click to collapse
linuxis, I was checking the code before maybe you could disable setting of SIP on initialization? On the old code, I think it's on Butlerlib.cpp line 862 to 878.
pfcsabre said:
linuxis, I was checking the code before maybe you could disable setting of SIP on initialization? On the old code, I think it's on Butlerlib.cpp line 862 to 878.
Click to expand...
Click to collapse
Good idea, thanks. I'll try that also
linuxis said:
Good idea, thanks. I'll try that also
Click to expand...
Click to collapse
Let me know if that works because I don't see the point of having the SIP initialized on startup in the code-- Butler will be detecting the change of stylus in/out (or in your case slide-in/slide-out) anyway when the main thread starts (correct me if I'm wrong about this )
Which ROMs work
Firstly - loving Butler, it's an excellent addition to the phone and if HTC have half a brain it'll be in the next standard ROM released!
Is there any chance we could post up which ROMs work with Butler and which don't? Just thinking it'll save people some time hard resetting and setting up their phones again if they're on a non-working ROM.
Qsqa's PROven ROM 2.1 - Working fine
At0mAng V4.0 - Shows keyboard during boot up, but works fine after that
Qsqa's PROven ROM 2.2 - Freezes on boot up with keyboard showing
Elite RC3 - Freezes on boot up with keyboard showing
Anyone care to chip in their experiences?
PDAVIET V12 - Freezes on boot up with keyboard showing
PDAVIET V13 - Freezes on boot up with keyboard showing
DA_G Kitchen ROMS - Freezes on boot up with keyboard showing (at least the ones I cooked)
Off topic, with a combination of SlideActions & KforTouchPro (and butler for the null keyboard) I now have my SIP's and keyboard working like the should. XT9 when needed, and MS$ driver when the keyboard is slide out. So now I can actualy use the keyboard in iGO8 en Ctrix clients!
Thanks!
Cheers
Cacti
Confused Stu said:
Firstly - loving Butler, it's an excellent addition to the phone and if HTC have half a brain it'll be in the next standard ROM released!
Is there any chance we could post up which ROMs work with Butler and which don't? Just thinking it'll save people some time hard resetting and setting up their phones again if they're on a non-working ROM.
Qsqa's PROven ROM 2.1 - Working fine
At0mAng V4.0 - Shows keyboard during boot up, but works fine after that
Qsqa's PROven ROM 2.2 - Freezes on boot up with keyboard showing
Elite RC3 - Freezes on boot up with keyboard showing
Anyone care to chip in their experiences?
Click to expand...
Click to collapse
RREv4 freezes as well
Alternativly, although not quite as developed as butler, TouchLockPro now allows for the launching of programs/command parameters for capacitive swipes and actually adds four more capacitive swipes than what butler does. Likewise it does NOT freeze upon start up for whatever reason on any rom I've tried.
proven works
[BUG] Problem with Manilla.
It has problem with manilla. After launching app its a must to change active tab if you want launch this or another app again.
Does Butler still allow you to scroll zoom messages and zoom in/out in Opera?
whiteblazer01 said:
Does Butler still allow you to scroll zoom messages and zoom in/out in Opera?
Click to expand...
Click to collapse
Yes, Butler doesn't impact on the touch sensitive circle area at all, it only notices and interprets light swipes over the call/home/back buttons.

Fixed Keyboard/Touch screen and more ATT Tilt

*Second post is a quick tutorial of all the steps I did*
For the past year+ I lots of problems with my tilt. Terrible keyboard response problems, like the keyboard only working 25% of the time. The touch screen being unresponsive or slow 50% of the time. I've hated my phone. Thought it was just a piece of junk. I soft reset so much I thought the reset button was going to fail.
I tried nearly every new ROM that came out, each time after being dissapointed because my problems remained, then I'd move on to the disable xt9 cab, tilt keyboard fix cab, keyboard speed up cab (which I'm still not sure if works, since I now have my initial keyboard delay set at 0 and I don't know if I see a difference), etc. Tried the touch sensitivity registry edit, installed the (I think) x1 touch sensitivity cab. But nothing seemed to change a thing.
I had realized that most of my issues were software related because sometimes things would work fine (for a couple minutes). I've tried the press the hell out of the keyboard buttons fix that was supposed to regain contact between the key, and the sensor for the keyboard, and pretty much everything out there.
Then I recently installed the HTC ROM for the Tilt, and voila, I have a new phone, works nearly flawlessly.
Since then, I have installed Manila 2d (start with update 20, install everything included, then install the latest version) youtube/opera/google maps/audio manager/pictures etc. all work perfectly, installed the Manila2D v20 N2A patch which fixed the weather tab to show my home town, M2DC and applied a new skin, Total Commander (to move the edited weathercities file), Wstask (awesome), ATT Navigator, Windows Live (great for syncing contacts), and it works perfectly. It's fast. I can use my phone now without the struggle, and am happier than I've been in a long time.
I haven't heard anyone suggesting this so I thought I'd let everyone know. This is the phone I always wanted from my Tilt. I have to assume that the minor hardware differences between versions creates a problem with non-native ROM's, and if you are having problems I recommend trying a factory ROM made for your device, you may be pleasantly surprised.
Dustin
*edit* As I'm sure most know, there are hardware issues with the keyboard for many, this will obviously not fix those issues. However, I was able to fix the massive software issues I've had which also effected the keyboard. I still have a testy Y key, but it's not a huge issue when compared to what it was like before. My phone works great.
Correct Forum?
Flashed to the HTC ROM for the AT&T Tilt, download here:
http://www.htc.com/us/SupportDownload.aspxp_id=67&cat=2&dl_id=94
Soft reset immediately after screen alignment, and setup to avoid bloatware.
Adjusted settings for MediaNet:
http://forum.xda-developers.com/showthread.php?p=1632060#post1632060
Installed the following cab files (here's the files, install order, what to do, how to do it, etc. is up to you, try to search for yourselves, I'll try to answer questions posed, included iFonz, and a couple other cabs for the heck of it if you guys wanna play with em):
http://http://rapidshare.com/files/239391014/Cab_Files.rar
Read the following post for info on installing m2d:
http://forum.xda-developers.com/showthread.php?t=425851
To install telenav go to the following address from your phone:
ota.telenav.com/att/tnn
If you do it right, I think you'll be happy campers, enjoy!
Dustin
I've been having the same issues with my tilt as well. EXTREMELY annoying. I love the tilt, but hate that it constantly lags.
Do you have a link to the ROM from HTC?
The last ROM from HTC for the tilt gave me problems
Yes please post the link as i am also having this problem.
Thanks
Link inside!
Here y'all go. It's important to note that this is ROM build 1.62.502.0 and will change your radio to 1.27.14.09. Further info can be found HERE
HTC AT&T Tilt ROM
Different link to the Rom
Here is the link for the page HTC posted the Tilt ROM download if you would like to read first before downloading:
http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=2&dl_id=94
Hope this helps you guys. For me it was night and day. Let me know if this helps you guys.
Also, I wonder if there are any ROM cooks out there who are interested in cooking ROM's based on the Tilt ROM. That would be sweeet!!!
Dustin
*edit* I'm not sure about the ROM tmnt.mikey posted, but the link I've posted does not change the radio to that version, I flashed and have radio version 1.65.21.18. I'm not sure what radio I was using pre-flash (oops).
does this work with kaiser as well?
because at&t does not have the front camera...
so if i flash to this rom, will it render my front camera unusable?
not that it's really that important, i'd rather have my keyboard functioning well again.
other than that, is there any complication if i run this on my kaiser?
because in the HTC page, it's said... only for at&t tilt...
Kaiser ROM
I have no way to know if this ROM will work for the Kaiser, someone would have to try it out and let us know. I can't imagine it would brick the phone, but the keyboard layout is different, and the front camera thing. However, you might look for the latest Kaiser ROM from HTC then apply all the cabs you want and see if that works for you. I installed the ATT ROM, then did a soft reset before the apps were loaded to save space and clutter, then installed just the cabs I prefer.
It's been almost a week now, and it is still working perfectly. I've installed almost 20 different cabs, it is running faster, and more stable than it ever has. I love my phone now. The difference is stunning. I haven't had any issues thus far, and I've never experienced that before. I hit a button and it works, I touch the screen it works. I'm going off about it so much because I want everyone to know this phone is not a lost cause. I'm still a little in shock how well it works. I had written it off, and thought between HTC, and Microsoft that this phone was just going to remain a glitchy pain in the rear. My phone was so difficult to use that I almost stopped texting all together. I was practically marking off each day on the calendar waiting for the remaining year of my contract to run out.
Dustin
Hi all..
my keyboard also hard to be pressed (X,B,N and fn key),other keys are perfect (easy to be pressed)..
im wondering why did that happen..
im using WM6.1 official for TyTN II,,so nothing is cooked..
anyone knows how to fix this issue?
cause it's so annoying to press thoses button hardly..sigh..
thank you..
berramm2001 said:
Hi all..
my keyboard also hard to be pressed (X,B,N and fn key),other keys are perfect (easy to be pressed)..
im wondering why did that happen..
im using WM6.1 official for TyTN II,,so nothing is cooked..
anyone knows how to fix this issue?
cause it's so annoying to press thoses button hardly..sigh..
thank you..
Click to expand...
Click to collapse
i actually followed the link from dustintm...
but the download was not for my area (i'm in singapore)
and you can't download it anyways...
you need to key in your serial number...
and it has to match the region...
so if that really fixed the keyboard problem...
congrats to those guys in the same region as dustintm...
as for why it happened, i also don't know...
i read in some other thread that it's unlikely if it's dust or the rubber...
i also think it has to do with the ROM, since some days my 'a' keys works fine...
Asian TyTN II ROM
Hey Jonathan,
Here is the link to the HTC Asia download page for the TyTN II:
http://www.htc.com/au/supportdownloadlist.aspx?p_id=13&act=sd&cat=all
Just so everyone knows, this ROM change I am talking about does not fix hardware related issues. I still have a testy "y" key, it works most of the time, but I do have to press it harder at times.
Prior to my find, I was having massive keyboard problems, sluggishness, having to press each key multiple times, etc. I was also having similar problems with the touch screen too.
This will not fix a hardware issue (obviously?). But I've found the new factory ROM has made my phone operate almost without flaw... for the first time. Responsive, stable and consistent. I can deal with the "y", I couldn't deal the snetacnes loking lik tihs (sentances looking like this (all the time)), and all the other problems/lock ups, etc.
Dustin
Keyboard problems sound like a hardware issue. You should try to find a local cellphone store that does repairs.
There is one in L.A. that can fix this for under $50.
Keyboard Problems
I found that I was experiencing hardware (keyboard), AND software related issues (keyboard, touch screen, sluggishness, and lock-ups). After installing this ROM all software issues have disappeared. I am very certain of this. One example is that occasionally the keyboard would work almost flawlessly (with the exception of the y key) and other times it was a complete struggle, multiple keypresses to register once, delay, etc. That made it clear to me that I was having software related issues.
I imagine it could have been ROM issues, or software related conflicts, but either way, I have solved my problems. I flashed to the latest HTC ATT Tilt ROM, and the following programs/cabs:
HTC Enchasements
HTC Audio Manager 2.0
herg62123 FSP, DShow, WMP Yo...
HTC Album 2.0
Google Maps
XDA-SPC-Noonski HTC YouTube
herg62123 2DManila_1_20_19131...
Customization Customize_Tool
snctln M2DC
C. Ghisler & Co. Total Commander
Debarron Manila2D v20N2A Patch
Windows Live 10.6.0034.0800 (Fixed)
waku WkTASK
AT&T Navigator
XDA-Team Opal Volume Control
Systweak Inc Reg Cleaner
SJ SamsungOmnia_Driver_D3D
Massimo Colored Top Bar
ELF Calculator Skin
The EquinoXe Wizard ReTOUCHed...
JUVS HTC Enlarge Start Menu
HTC WMP Touch Skin
Moble Software Design, LLC FreeCaddie
J.S. Advanced Configuration Tool 3.2
Microsoft .NET CF 3.5
XDA-Team NEW M2D
Dustin
BTW Trjons thanks for your post.
be a hero post all your cabs or links
So, it is heresy you speak! Stock rom! Yeah, I too am sick of the laggy unreliable roms. WAY too much wasted time, energy and effort. Gone back to ATT even though on TMO. How about posting your cabs or links for the lazy ones of us out here?
davewaave said:
So, it is heresy you speak! Stock rom! Yeah, I too am sick of the laggy unreliable roms. WAY too much wasted time, energy and effort. Gone back to ATT even though on TMO. How about posting your cabs or links for the lazy ones of us out here?
Click to expand...
Click to collapse
Also, did you get rid of the AT&T bloatware on yours as well? On a quest for the perfect ROM myself, so I will keep watching the thread for more info.
Would like to see those links as well.
If you want to leave out the ATT bloat ware, after you go through the screen align, do a reset. It will fail to run the script for the **** add ons and then you have basically a virgin rom.
Cab files
Hey lazy people ! Here's a link to all my cabs:
http://rapidshare.com/files/239391014/Cab_Files.rar
I'm somewhat lazy too, so you're going to have to download all of them then pick through to get the ones you want. Enjoy!
Dustin
Thanks
Your're a hero! Thanks for the cabs
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WHOA! Virus detected "win32/virut" after extracting file then accessing folder with "glossy black bars.exe"
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Hopefully I've removed the infected file.
I didn't know glossyblackbars.exe had a virus???
Don't need it anyway, I deleted it, recompressed the cab files and re-upped to rapidshare. I edited all my posts with the new zip link.
Please let me know if it's virus free now... so sorry!
Dustin
Thanks so much, Dustin!!! I think I will be loading the AT&T 6.1 ROM again, following your fixes, and praying that my 2-PC ActiveSync problem somehow gets resolved along the way, too. (We need a "crossing fingers" smilie! HA!)
I'm just not looking forward to setting my Tilt up all over again. Must wait until I'm in the mood.
Dustintm said:
I didn't know glossyblackbars.exe had a virus???
Don't need it anyway, I deleted it, recompressed the cab files and re-upped to rapidshare. I edited all my posts with the new zip link.
Please let me know if it's virus free now... so sorry!
Dustin
Click to expand...
Click to collapse

Manila 2.1 standard WM dialer

Hello,
I'm running topix 2.5 (however my guess will be that all roms with the new manila will have this problem). The problem is that I want to revert to the standard WM dialer so I can use PocketShield "better" again.
With the old manila it was no problem to turn on this dialer but now it does not show any information anymore. You can see that on the screen capture below. The lines are empty, but the links still work, so only the callers name is not shown. Do not mind the colors, I just applied a skin in the hope it works again.
Does anyone know how to fix this? Thanks!
r.boeters said:
Hello,
I'm running topix 2.5 (however my guess will be that all roms with the new manila will have this problem). The problem is that I want to revert to the standard WM dialer so I can use PocketShield "better" again.
With the old manila it was no problem to turn on this dialer but now it does not show any information anymore. You can see that on the screen capture below. The lines are empty, but the links still work, so only the callers name is not shown. Do not mind the colors, I just applied a skin in the hope it works again.
Does anyone know how to fix this? Thanks!
Click to expand...
Click to collapse
As for as I know, there would be NO WAY !!!
And I think this is not because of the New Manila but the Phone Canvas (Topaz, Rhodium).
Why would there be no way?
If it's the phone canvas as you suggest.. This is just a package right, so somehow it should be possible to remove this package...
Still hoping to find a fix in the near future...!
r.boeters said:
Why would there be no way?
If it's the phone canvas as you suggest.. This is just a package right, so somehow it should be possible to remove this package...
Still hoping to find a fix in the near future...!
Click to expand...
Click to collapse
Yes, at least no way at the moment until this is to be done by HTC. This issue has been discussed many times in Miri's ROM Thread. Hopefully it will be fixed in near future

Categories

Resources