Problems updating Radio - Touch Diamond, MDA Compact IV General

Hi,
I cannot manage to update my radio to the 1.00.25.05
I had my mda unlocked by olipro, which pushes HSPL 1.20.
I learned to upgrade to 1.40, which I downloaded and installed (it shows 1.30 during the upgrade)
But it doesn't work anyway, not on my XP nor on my Vista PC.
It works until the point where the progress bar on the PPC appears, but it stays at 0%.
After a while it stops with an error message (262 or 276 AFAIK)
What can I do?
Thanks for your help, Guenne

Related

ERROR 114 – RADIO ROM UPDATE ERROR

I have upgraded my i-mate PDA2K with de file (from i-mate web site) BA_CDL_12203_ESN_177_10600_SHIP.exe a few weeks ago and everything went right, but a few days ago I had problems with the phone (I couldn't receive SMS and no GPRS connection could be stablished) and after a warm start, the blue i-mate screen showed "No GSM" instead "R 1.06.00" so I decided to re-install de update file. This second update process stops with "ERROR 114 – RADIO ROM UPDATE ERROR" when it's trying to update the radio ROM. I have tryed to install the last radio rom version (1.10.00) and the previous one (1.02.00) with no success at all, always the same ERROR 114....
If I install only the ExtROM the device comes to life and the phone seems to work but GPRS doesn't work and when I try to upgrade or simply reinstall only the radio ROM I always get the same ERROR 114....
Could anybody help me to fix this error? I would like to upgrade to the latest version and get my PDA up and everything running.
Thanks a lot.
yes please any body say why Error 114 ?
I cant update my IMATE T-MOBULE with USB, I see error 114 in differend percetanges
thx
Popito
1) Have you tried the 1.12 of wiki and have you fixed it with the fix.bat as per getiting started on wiki ?
2) are you saying that the install of the BA_CDL_12203_ESN_177_10600_SHIP.exefails even though you were able to instal it in the past.

BA / WM5 / Radio 1.06 upgrade

Any advice on how to achieve the upgrade. I have attempted with BAUpgradeUT and and MAUpgradnoid without sucess. My Rom version is 5.03.02 WWE (3/2/05) Radio Ver - 1.06.00, Protocol Ver 1337.38, ExtRom Ver - is blank. Getdeviceid recognises as a PH20B.
Using BAUpg is don't recognise device
Using MAUpg it correctly identifies CE image ver5. it goes to check information on device, Activesync shuts down, then Error 101 connection error
Any ideas ?
Connection error....
Have you tried putting the device into bootloader mode before cradling it?
I initially had the same problem upgrading my BA.
Press camera (media), record, power all at once while you reset. The screen should display "Serial" until you cradle the device, then switch to "USB."
Make sure you run the upgrade program twice, it often fails the first time.
Hope this helps, post again if this doesn't work.
Mick...

"radio bootloader version error"

hi I've got a qtek 9090. It has a "Test Only not for sale" on the screen when it boots up. I wanted to update the ROM on it and when I started this message came up "radio bootloader version error" it happend when the window with % result of update showed up on screen. Since then I my ppc display is grey with "Serial" and "v2.03" on it. I ahve tried this
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_Bootloader_mode
but it didn't help.
If Any one got any idea how to fix it please contact me on my email address [email protected]om
Thanx
Hello,
I Have a spv m2000 and I have excatly the same problem... I Try some versions of rom but it doesn't work...
If your PPC is always in 'Serial' and 'v2.03', you have to reinstall a rom without the radio. To do that, you just need to remove the file radio.nbf in the rom files......and to reinstall the good rom without the radio..
But with this procedure, the radio isn't upgrade.It's just to restart your ppc.
I can't find how to upgrade the radio..
Your bluetooth works well ?? My bluetooth stop after sevral seconds I've launched it and say a problem with the licence.. ANd you?? That's why i would like to upgrade the radio but I can't succeed..
If you find a way to upgrade, please tell me...
Thanks
Rom
southparkfan76 said:
hi I've got a qtek 9090. It has a "Test Only not for sale" on the screen when it boots up. I wanted to update the ROM on it and when I started this message came up "radio bootloader version error" it happend when the window with % result of update showed up on screen. Since then I my ppc display is grey with "Serial" and "v2.03" on it. I ahve tried this
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_Bootloader_mode
but it didn't help.
If Any one got any idea how to fix it please contact me on my email address [email protected]
Thanx
Click to expand...
Click to collapse
Hi
I had the same problem.
My PC was running vista, so i went to a pc running XP and the followed your link and it worked a treat.
Maybe that's your problem.

HardSPL issue with 8125 G4 and 2.21.olip

I've been trying to find a thread that addresses my issue but have'nt been able to find anything addressing my issue.
I wanted to upgrade my 8125 G4 (IPL/SPL 2.25.0001) to WM6 so I tried the guide for "newbies".
I have windows XP and Activesync 4.45. I was able to establish a connection with my 8125. I ran the HardSPL and it confirmed my device is G4 and it went to the utility.
I followed the utility and was able to reconnect and reestablish connection with activesync. after rebooting my phone the IPL is 2.21.0001 but the SPL is still 2.25.0001. Can you tell me why it did'nt change to
2.21.olip?
I then tried rerunning HardSPL but when the utility asked me to reconnect and establish connection with activesync activesync does not discover the phone. Otherwise am able to use my phone just fine and can even activesync with my laptop.
I did not continue to other steps for fear of bricking my phone since the guide says not to continue if SPL isn't 2.21.olip.
Can anyone please help me get back on my way to WM6?
Thanks
my phone is:
Rom 2.25.11.1 wwE
radio 02.25.11
Protocol 4.1.13.12
ExtRom 2.25.11.102
brent39902 said:
I've been trying to find a thread that addresses my issue but have'nt been able to find anything addressing my issue.
I wanted to upgrade my 8125 G4 (IPL/SPL 2.25.0001) to WM6 so I tried the guide for "newbies".
I have windows XP and Activesync 4.45. I was able to establish a connection with my 8125. I ran the HardSPL and it confirmed my device is G4 and it went to the utility.
I followed the utility and was able to reconnect and reestablish connection with activesync. after rebooting my phone the IPL is 2.21.0001 but the SPL is still 2.25.0001. Can you tell me why it did'nt change to
2.21.olip?
I then tried rerunning HardSPL but when the utility asked me to reconnect and establish connection with activesync activesync does not discover the phone. Otherwise am able to use my phone just fine and can even activesync with my laptop.
I did not continue to other steps for fear of bricking my phone since the guide says not to continue if SPL isn't 2.21.olip.
Can anyone please help me get back on my way to WM6?
Thanks
my phone is:
Rom 2.25.11.1 wwE
radio 02.25.11
Protocol 4.1.13.12
ExtRom 2.25.11.102
Click to expand...
Click to collapse
Did the HardSPL completed successfully ? did the screen go white for awhile.If it didn't,then rerun the HardSPL again,but disable or shut down any Antivirus or firewall and any other heavy application or program running in the background while applying HardSPL sometimes create problems also.Reset the phone,reset the pc and close all programs/applications from the desktop through 'Task Manager' and don't surf the net or do any other operation during HardSPL,let it complete the whole process,if the screen goes white,don't panic its the essential part.
HardSPL did complete successfully.
The screen on the phone did change to white.
I had the windows firewall off and antivirus disabled also. i think i did have internet explorer open at the time however.
I will try again running it with no background programs running and see what happens.
Are there any known services or background applications that prevent a successfull HardSPL installation?

P3600 Radio Flashing problems

Hi, I am trying to flash my P3600 with the 1.56.70.11 Radio, but every time I start RUU, I get an error (after the device is put into tri-colour screen) saying 'Ensure your device is properly connected or sitting in the cradle correctly' (or something along those lines.
I have tried 3 times now! Please help! I apparently have Olipro 1.30 on the P3600, but something makes me think I have the old Des's Crashproof (if that even exists lol)
Thanks alot,
The same thing happen to me...
I also stuck at 3 colour screen, after clicked the update button (ROM Update Utility - sspl des)
Master, Help us...
@Norman: just run RUU file on windows XP...
will be fine
I find this same case when I ran RUU on Win7 or vista...

Categories

Resources