Related
Hi
Am newbie to the whole XDA thing (am just converting from BB), have managed to unlock my XDA Mini S and tried running K-JAM_WWE_216901_2169101_020721_ship.exe as i heard this would reflash the ROM to the latest (a friend of mine gave me this copy).
Got an error during this, and wondered if there was a specific XDA Mini S version (have searched on the site and it appears that there is on ftp://ftp.xda-developers.com/Wizard) and there are many different ROMS under the ROM directory, but i am unable to login to this site.
Am i just being thick here.
Any help gretaly appreciated.
That ROM upgrade worked ok on my xda-mini-s
When I upgraded my ROM I done the following.....
#unlock phone
with no SIM card in phone
copy EnableRapi.cab to phone
run EnableRapi.cab from phone
run lokiwiz.bat from PC
select option 'U' Unlock SIM
phone reboots
add SIM to backout bin file names on PC
run lokiwiz.bat from PC
select option 'C' unlock CID
phone reboots
add CID to backout bin file names on PC
#install new ROM
uncomress ROM file from zip
click ROM install file
follow instruction
takes 10 minutes
phone reboots
Hope this helps
Bilbo,
Hi. I ran through what you put but my Mini S does not auto reboot. I'm not sure the exact definition of a soft reboot is? - Put the stylus in the side or hold the power button for a few seconds?
Either way I cannot get the new KJAM rom on as invalid vendor ID is haunting me.
Any help would be appreciated.
Thank You
Ben
Dudes - I've done the same upgrade to my mini S. Not sure if it's worth the bother. No difference in speed/performance and my keyboard shifted symbols (@?£$) are out of sync. I think I'll go back to the Mini S rom without the customised stuff.
LLcoolJ:
I noticed lots of difference, speed and battery life.
To get the keyboard from US to UK symbols use the following:
Here are the registry changes ....
Keyboard language
Registry: HKCU\ControlPanel\Keybd
Key: Locale (string)
Value: 0809 English UK
0409 English US
0407 German
0419 Russian
040C French
0410 Italian
040A Spanish
benih007 said:
Bilbo,
Hi. I ran through what you put but my Mini S does not auto reboot. I'm not sure the exact definition of a soft reboot is? - Put the stylus in the side or hold the power button for a few seconds?
Either way I cannot get the new KJAM rom on as invalid vendor ID is haunting me.
Any help would be appreciated.
Thank You
Ben
Click to expand...
Click to collapse
The invalid vendor ID is the result of the ROM update..... to get rid of it make sure you run :
run lokiwiz.bat from PC
select option 'U' Unlock SIM
phone reboots
add SIM to backout bin file names on PC
A soft reboot is when you hit the reset button on the right hand side, its like rebooting a PC. A hard reset however is a re-install boot where you loose everything and the ROM is re-installed.
Cheers Bilbo - I've made the changes to the registry and the keyboard talks like me. Your right about battery power as well.
Bilbo.
Thank you for replying and helping.
Let me just go over what you said...
first I ran the loki cab file on the mini S.
run lokiwiz.bat from PC -- done.
select option 'U' Unlock SIM -- done (with sim card removed)
phone reboots -- not automatically though, but I will reboot it after the lokiwiz.bat finishes
add SIM to backout bin file names on PC -- what does this mean? this is not in the lokiwiz instructions and this is where i'm going wrong. Where is the bin file created btw, I can never find it?
I have tried so many combinations i'm starting to lose hope.
If you can help to get this damn thing working I promise to make a donation to this web site.
Thanks for all the good work.
Ben
i managed to get the unlock, but did not do the CID (so will try that).
So once i have done that will the K-JAM_WWE_216901_2169101_020721_ship.exe upgrade work?
Here's how I got mine working. - Remove the Sim card. Make sure you use Lockwiz02b. Select U to unlock from the options menu. The mini S should reboot automatically. Leave the device alone until its functional again and then start Lockwiz02b again. Select C (CID unlock) from the menu. It should reboot again and close down the Lockwiz box. The mini S should now be ready for a rom upgrade. On my first attempt I used the original Lockwiz prog which caused problems for me.
I'm about to do my rom update on my mini s....but this thread is so confusing!
Is there a step by step guide somewhere on the forum???
ROM Upgrade
Upgraded O2 XDA mini without any real problems:
I used the aWizard 1.3 Beta 2 tool which allowed me to carry out the CID Unlock and was pretty easy to understand. What it did not do was pick up the ROM from the rom folder but once I had completed the CID unlock I ran the rom normally and all was well.
So in essence: Connect Mini to PC via Activesync
Run the aWizard Bat file enabling RAPI (This is used to communicate with your XDA once it has done using Activesync). Then select the Unlock CID option. Once completed I then exited the wizard and followed the instructions as part of the rom upgrade and all worked well no hitches except the one mentioned above about the keyboard (now I have to find out how to modify the registry).
So what I used: aWizard 1.3 Beta 2 and QTEK Rom 2.17
186504-ruu_9100_2170702_21707102_20710_qtek_wwe_ship.exe
Mystery Solved!!!!
I finally figured out why its not working....
When I downloaded the loki zip file I opened it up in winzip and dragged the contents to a folder I created. Ran the batch file eveything seemed ok and the unlocker said it unlocked the device.
I have now realised that you have extract the files from the loki zip file and use the folder structure. If you don't, the utils directory is not created and the loki.bat cannot reference some files.
Found the answer on page 12/13 of the loki thread.
Thanks All
Ben
After doing the CID unlock the ROM install worked fine.
Just having the keyboard issue at the moment with symbols, went to:
Registry: HKCU\ControlPanel\Keybd
Key: Locale (string)
Value: 0809 English UK
but could not find the locale key to set to UK?
All i see is:
DefaultKeyLock
InitialDelay
MuteSwitch
RepeatRate
ShowWarningMsg
Am i looking in the right place or do i have to add this in (if so how)?
Cheers
Youv'e got to create a new registry key. Assuming you've got a registry editor. Go to HKEY_CURRENT_USER / Control Panel / Keybd.
Then create a new string value. Name it Locale and give it a value of 0809 for UK. Then reboot.
Just went in a created the new reg key as you mentioned.
Rebooted and it worked.
Many thanks for all your help on this, it is most appreciated.
I am now the converted!!!
So to sum up for anybody else:
Bought XDA Mini S from 02
use Lockwiz02b
Select U to unlock from the options menu
The mini S should reboot automatically
Start Lockwiz02b again
Select C (CID unlock) from the menu
It should reboot again and close down the Lockwiz box
The mini S should now be ready for a rom upgrade.
Then run
K-JAM_WWE_216901_2169101_020721_ship.exe
follow usual prompts.
Once phone is up and running, get a reg edit tool (i used PHMregedit) as the keyboard for a couple of the symbols is out of synch (think it is US style).
Using regedit tool
Go to HKEY_CURRENT_USER / Control Panel / Keybd
Then create a new string value
Name it Locale and give it a value of 0809 for UK
Then reboot.
Mini XDA should now work fine.
I have found that the new push technology for email is faster than Blackberry and more usueful.
Hope this is helpful to others.
Cheers great forum
quick question...
i am fed up with waiting for o2 to release their latest ROM so i am going to take the plunge with this ROM instead, my question is do i have to make any special changes once installed to make it work with O2 UK i.e. mms settings, GPRS settings etc.?
Also i noticed somebody has put together a T-Mobile USA customised ROM any chance that somebody will do this for O2 UK?
hyettd said:
Just went in a created the new reg key as you mentioned.
Rebooted and it worked.
Many thanks for all your help on this, it is most appreciated.
I am now the converted!!!
So to sum up for anybody else:
Bought XDA Mini S from 02
use Lockwiz02b
Select U to unlock from the options menu
The mini S should reboot automatically
Start Lockwiz02b again
Select C (CID unlock) from the menu
It should reboot again and close down the Lockwiz box
The mini S should now be ready for a rom upgrade.
Then run
K-JAM_WWE_216901_2169101_020721_ship.exe
follow usual prompts.
Once phone is up and running, get a reg edit tool (i used PHMregedit) as the keyboard for a couple of the symbols is out of synch (think it is US style).
Using regedit tool
Go to HKEY_CURRENT_USER / Control Panel / Keybd
Then create a new string value
Name it Locale and give it a value of 0809 for UK
Then reboot.
Mini XDA should now work fine.
I have found that the new push technology for email is faster than Blackberry and more usueful.
Hope this is helpful to others.
Cheers great forum
Click to expand...
Click to collapse
The Problem im having here is that once i have created the registry key, it deletes after a reboot. Is there something else i need to unlock to allow writing to the registry?
New Roms
Hi there - I'm sure this is your answer - I have read this on many forums.
WM05 takes a while to store the registry updates after you exit your editor. Make the registry change and wait a minute or so before performing the soft reset.
Hope this helps - we have all fell for this "improvement" to WM5 from the boys at MS.
Regards,
Chris.
:lol:
Thanks Bilbo . . . Spot on. First time to all this and followed it a treat
Thanks All
I have tested a few HTC Comm Managers(new black theme. Kaiser style) and low and behold non of them have the wifi working right. I cannot enable/disable it from the comm manager. Anybody find a real working one that does this? Even some that were claimed to be "FIXED" didn't work...
Anyone have a dump of the original also? (stock WM6)
I've got the same problem since the upgrade to WM6. Nothing works: soft-hard reset, upgrade... WLAN doesn't works (since comm manager).
me too...any solution mods?
Same problem here... The default WM6 HTC comm manager is working corectly.
anyone have a cab file of the original? incase i want to revert back to it?
You might find the fix here:
http://forum.xda-developers.com/showthread.php?t=326655&highlight=wing+10+button
What's wrong with it?
I'd tried to install http://forum.xda-developers.com/attachment.php?attachmentid=48832&d=1188607222
And then, the following message: "Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system p ermissions"
...
When I try to do the change in registry, a new surprise: in the registry tree, after CommManager doesn't exist "WLAN", but numbers (0,1,2,3... and in 3 there's WLAN). The change in registry: NOT WORK YET!
I've found the problem (maybe...). In folder "Connections" there's not Wi-Fi icon... what it means?
pichetinhas said:
What's wrong with it?
I'd tried to install http://forum.xda-developers.com/attachment.php?attachmentid=48832&d=1188607222
And then, the following message: "Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system p ermissions"
...
(
Click to expand...
Click to collapse
SAME THING HERE! No permission to do this! I hope this does not result in a hard reset.
OK, I finally got anew one installed. Even though I tried a fresh install after a reboot, I still couldnt get it installed. So, what I did was start commmanager, Bthen stop it in Settings > Memory > Active programs
REALLY A GENIE!!! I'll try it...
It's Ok! Now, I could installed the comm manager, but it doesn't work... What I must fix exactly?
This is exactly what I did:
- Step 1: Copy to the phone and run it.
- Step 2: (Fixing WLAN button malfunction, somehow it doesn’t work by default on Wing): **Thanks for beowulf6’s post for this fix.
Change "HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager \WLAN= "Windows WLanMgr.exe " "DeviceName" = "{98C5250D-C29A-4985-AE5F-AFE5367E5006} TNETW12345"
the end of this long String is the WLAN-Adaptername of the Device.
just change in this Example "TNETW12345" into "TNETWLN1"
-Step 3: (Fixing Wi-Fi setting launch issue) **Thanks for phatman81’s post for this fix.
Change "HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN\ Default:"
\Windows\WlanMgr.exe --> \Windows\ctlpnl.exe
After all this... The WLAN icon is always off...
Nobody else has the same problem? It's incredible!! I begin to think that I've done something wrong. It has began after the upgrade to WM6... Now, I can't downgrade to WM5 because I don't have the rom WM5 original... :'(
That CommManager dosen't seem to work well. I had problems with it. I found another one that DID work though.
grizzley said:
That CommManager dosen't seem to work well. I had problems with it. I found another one that DID work though.
Click to expand...
Click to collapse
hi, can you please point me to where you downloaded this??
hello
i have the same problem. wifi card not run.
the problem? http://forum.xda-developers.com/showthread.php?t=322225
i d´nt know.
anyone a idea? thanks
Do a search. You will find that you have to edit the settings in the registry for the comm manager.
I have this same problem. If anybody has a cab file of the stock tmo com manager, please post it!
Thanks in advance!
You guys...
Go into the registry and find out what the name is for the wireless adapter is. Take that information and change the adapter that is shown in the comm manager.
Thats really all there is to it.
If youre going to screw with the software, youre going to need to blood on your hands. You cant just throw stuff on the phones and expect it to work.
All right...
On my wing
\\\registry\HKLM\Software\HTC\CommManager\WLAN\<DeviceName>
{98C5250D-C29A-4985-AE5F-AFE5367E5006}\TNETTWLN1
That is the adapter for my phone, might be the same for you.
If youre using the changable comm manager you will have to change the settings for the wlan setup.
\\\registry\HKLM\Software\HTC\CommManager\WLAN\<Default>
\Windows\WrlsMgr.exe
Once again might be different for you.
Im using TouchIT 2.3 my stuff might be different.
I GOT IT
pichetinhas said:
It's Ok! Now, I could installed the comm manager, but it doesn't work... What I must fix exactly?
This is exactly what I did:
- Step 1: Copy to the phone and run it.
- Step 2: (Fixing WLAN button malfunction, somehow it doesn’t work by default on Wing): **Thanks for beowulf6’s post for this fix.
Change "HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager \WLAN= "Windows WLanMgr.exe " "DeviceName" = "{98C5250D-C29A-4985-AE5F-AFE5367E5006} TNETW12345"
the end of this long String is the WLAN-Adaptername of the Device.
just change in this Example "TNETW12345" into "TNETWLN1"
-Step 3: (Fixing Wi-Fi setting launch issue) **Thanks for phatman81’s post for this fix.
Change "HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN\ Default:"
\Windows\WlanMgr.exe --> \Windows\ctlpnl.exe
After all this... The WLAN icon is always off...
Nobody else has the same problem? It's incredible!! I begin to think that I've done something wrong. It has began after the upgrade to WM6... Now, I can't downgrade to WM5 because I don't have the rom WM5 original... :'(
Click to expand...
Click to collapse
If u wanna know your adapter go to
HKLM\comm\tcpip\linkage
mine is SDIO86861 and in linkage folder it is shown ppp SDIO86861
Hope this info helps u
Re-installed Kaiser.CommManager.10Button.3GOnly.Switch.For.Other.Devices-Schen
and now there is no text under the icons, and no menu options. Any suggestions? Thanx in advance.
nufsaid said:
Re-installed Kaiser.CommManager.10Button.3GOnly.Switch.For.Other.Devices-Schen
and now there is no text under the icons, and no menu options. Any suggestions? Thanx in advance.
Click to expand...
Click to collapse
Hi
I had the same issue and first of all think this is a language compatibility problem (...what is your??)!however, did you installed any other CommManager too??
Try to uninstall it (also others if you did!), soft-reset, install only this one again (but be sure the CommManager.exe app is really closed!!)!!If doens't work:
1)go in the registry and check these keys (default value): [HKEY_LOCAL_MACHINE\Software\HTC\CommManager]
->"EmptyMenuBar -> 0"
->"TextColor -> 0"
2)go in the \Windows folder and look for the "CommManager.exe.0409.mui" file (...i'm assuming you haven't an english device/os), cut it and paste wherever you want.Soft-reset and look what happen!If still nothing change the language code (..0409.. -> it is for english, more here) in that file to your default one and overwrite the file in \Windows folder!!Maybe now you get the text, but in english! ...better than nothing!
I have this issue with the 6 button on/off CommManager (i can use it only in English), but using this, like the HTC one (more Beam and 3G buttons, but with 9 (default) and not 10 buttons) i have no language problem, try this one you too!!!
Hope to help you!!
Ciao
Thanx works great now.
SOLVED
nufsaid said:
Thanx works great now.
Click to expand...
Click to collapse
..good!!
problem came back...this only happens after i reflash my device, i'm using WWE ATT rom now as compared to dutty's 6.1 wwe, and now my 10 button comm manager is doing the same thing. Heres a screen of what it's showing. (chat and icontact should only be viewable from today screen.)
nufsaid said:
problem came back...this only happens after i reflash my device, i'm using WWE ATT rom now as compared to dutty's 6.1 wwe, and now my 10 button comm manager is doing the same thing. Heres a screen of what it's showing. (chat and icontact should only be viewable from today screen.)
Click to expand...
Click to collapse
...So, if you are using a WWE (english) Rom, your isn't a language problem!!
If you necessarily want this CommManager try to ask in the thread where got it (...I didn't well understand if this is the default one coming in that rom!), or try this other one (also 10 buttons, but different -> look the picture!, and try to install over it, if that is the default)!
...is that the default?? (add more info!)
If yes, first of all ask for help in the rom thread (maybe it's a rom bug, and other people have the same problem)!
If no, try what i said above!
Let me know...
Found Problem!
This only happened when I created a shortcut to commanager from windows folder and placed into startmenu/programs, after deleting shortcut all is well. I was trying to re-map the PTT button to work w/ commanager, the only way to I saw to do this was to copy original commanager to the folder that contained a list for re-mapping options (settings/buttons/program buttons) so I guess i'm **** out of luck on a remap to commanager, if you know anything let me know, thanks for your help.
Finally after the sucessful work of the PV team...we have a working STK for our PPC's....attached is the STK extracted from Sonblacks Rom..
Enjoy and post your feedback ( even if it works or NOT )
Edit : 22nd June 2008
as per request..i have modded the cab file and added the REG keys also..now please try again and post the results..else i have started to learn Porting of ROMs..have extracted Farias ROM..will see later if there is something useful for our device.. ..
I owned a wizard on my 18th Bday ( but blowed the battery off )
Edit : 23rd June 2008
Please try the newly attached CAB file an post your results
im from the phillipines.. using both smart and digitel networks.. this doesnt work for me.. only white blank white screen display..
did the STK work for YOU in Sonblacks Rom
ather90 said:
did the STK work for YOU in Sonblacks Rom
Click to expand...
Click to collapse
never tried the sonblack rom ather.. im using master c_shekhar wm6.1 build 19209..
the STK has been reported to work on Sonblacks ROM..so i dumped the ROM and extracted the STK from it..
No luck yet...
It's not working. Only opens a blank white screen. After setting the STK service to start at startup-and a softreset, the STK UI link in start menu/programs changes to DialogServices which is my network provider. I tried diffrent settings in registry too, but still No luck. Can you add the settings in HKLM/Services/STK_Service too in the CAB. Is there any other Registry modifications that affects STK.
oki doki..will redump the rom again and take out the registery also
New version added..check first Post for the cab
------>
ather90 said:
New version added..check first Post for the cab
Click to expand...
Click to collapse
Still not working.... But try this,
1.Install & restart
2.Open FdcSoft task-mgr or SKtools
3.Go to services section. You will see a service named Stk_Services. This is in automatic mode, but stopped.
4.Start it.
5.Now click the start menu shortcut. It may still show a white screenin the first time, but notem the soft-keys are now labeled.
6.Exit from it and clic again.
7. NOW IT WORKS. But when clicked on something in the second level menu, it gives a error message
"sorry, service is unavailable. Error:FF03"
Still something is missing. I think the best method available is to build our rom on the PDAVIET rom.
these files are extracted from PV rom it self..now i know it cant be the Enviromental Difference ..what could be the problem..will try again the Registery
ather90 said:
these files are extracted from PV rom it self..now i know it cant be the Enviromental Difference ..what could be the problem..will try again the Registery
Click to expand...
Click to collapse
I dumped the PDAVIET rom and searched the registry for anythink related to STK, but I failed. Looking forward for a good solution from you. Sir, how can I set the STK service to autostart & keep working at startup? I tried in the registry manually and with FdcSoft Task Manager. It says automatic, But still I have to start it manually after each restart.
tell me one thing..when u "Start" the STK..can u tell me whaat does the following registery shows you
HKLM/Services/Stk_service/
Keep =
tell me whats the value of keep after u start it
after i installed the STK2.cab, it autatically restarded the phone, open my program folder and saw that there are two STK link.
one is the original "myservice" Menu
and the other one is STK UI
i clicked the new link program bt unfortunately, the same appearance that i see everytime i open my last link of STK program. There are only white screen and "STK Service" at the top.
here is what happened asther. hope that it will help you making the updated cab for STK..
thanks for the Info.btw
the names ather
ather90 said:
tell me one thing..when u "Start" the STK..can u tell me whaat does the following registery shows you
HKLM/Services/Stk_service/
Keep =
tell me whats the value of keep after u start it
Click to expand...
Click to collapse
HKLM/Services/Stk_service/
Keep = 1
(But this is independent of the status of the service. No matter it is STARTED or STOPPED, the 'keep' stays in 1
lols..
sori... it reminded me of something.. ahehehe.. its a typo error..
shiranmotha said:
HKLM/Services/Stk_service/
Keep = 1
(But this is independent of the status of the service. No matter it is STARTED or STOPPED, the 'keep' stays in 1
Click to expand...
Click to collapse
hmm..i gues i will have to try some thing else..will see what i can do
what is the update for this cab?
ahehe..
sori for being impatient.. ahehehe..
ciao!
What about this...?
ather90 said:
hmm..i gues i will have to try some thing else..will see what i can do
Click to expand...
Click to collapse
Can we use this in some way to work in our Hima...?
http://forum.xda-developers.com/showthread.php?p=2329551#post2329551
will see this..once i confirm that third version is not working
Third virsion released
Hi All,
I found a solution, how BlacKberry connect can run under WM6.5 on Raphael.
Here it is:
Change device ID, from Start -> Settings -> System -> About -> Device ID to TouchPro
3. Install a registry editor, then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .1.6.0
4. Install BBConnect 4.0.0.103.
5. Setup with Blacberry Desktop software.
Hope this is helpfull.
Cheers,
Zsocee
quick question changing the device id wont mess with any installed programs that use the device name for registration keys will it?
and can anyone else verify this works?
freekquency said:
quick question changing the device id wont mess with any installed programs that use the device name for registration keys will it?
and can anyone else verify this works?
Click to expand...
Click to collapse
It will certainly, if you have programs installed which use the ID for their registration.
But I doubt that the device ID need to be changed to make that go. Changing the AKU version in the registry was since ever the trick to make BBConnect working on older devices. I think this is the only requirement.
Thanks Zsocee, I will try that.
freekquency said:
quick question changing the device id wont mess with any installed programs that use the device name for registration keys will it?
and can anyone else verify this works?
Click to expand...
Click to collapse
Hi,
I have tried with couple of 6.5 ROMs, and worked well.
Pls report if this is not working for you.
Cheers,
Zsocee
I've tried this trick only come to find out that when I change the device ID to TouchPro it changes the keyboard mapping. Also I tried just to change the AKU but that didn't help. Been using DA_G roms.
Has already been discussed here
http://forum.xda-developers.com/showthread.php?t=510461
Zsocee said:
Hi All,
I found a solution, how BlacKberry connect can run under WM6.5 on Raphael.
Here it is:
Change device ID, from Start -> Settings -> System -> About -> Device ID to TouchPro
3. Install a registry editor, then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .1.6.0
4. Install BBConnect 4.0.0.103.
5. Setup with Blacberry Desktop software.
Hope this is helpfull.
Cheers,
Zsocee
Click to expand...
Click to collapse
Does this only work with BES accounts or does it work with BIS accounts also?
Zsocee said:
Hi All,
I found a solution, how BlacKberry connect can run under WM6.5 on Raphael.
Here it is:
Change device ID, from Start -> Settings -> System -> About -> Device ID to TouchPro
3. Install a registry editor, then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .1.6.0
4. Install BBConnect 4.0.0.103.
5. Setup with Blacberry Desktop software.
Hope this is helpfull.
Cheers,
Zsocee
Click to expand...
Click to collapse
Hi Zsocee,
Thanks for your brilliant tip. I have tried the registry change on my Diamond, WM6.5, TF3D2, Rhodium, BBConnect 4.0.0.106 and it works!!!! Big thanks
doctajay said:
Does this only work with BES accounts or does it work with BIS accounts also?
Click to expand...
Click to collapse
Hi,
to be honest I don't know I'm using BES.
Br,
Zsocee
Tried it exactly that way but how often do you get a "Security Service died unexpectedly!"?
Blackberry Connect on Tilt2
I tried setting the registry and ID setting but after running the Blackberry Connect Desktop application it didn't install on my Tilt2. It did install on my desktop of course not where I needed it. It acted like my Tilt2 wasn't even connected via Activesync.
Zsocee said:
Hi All,
I found a solution, how BlacKberry connect can run under WM6.5 on Raphael.
Here it is:
Change device ID, from Start -> Settings -> System -> About -> Device ID to TouchPro
3. Install a registry editor, then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .1.6.0
4. Install BBConnect 4.0.0.103.
5. Setup with Blacberry Desktop software.
Hope this is helpfull.
Cheers,
Zsocee
Click to expand...
Click to collapse
works like a gem thanks i use bb connect 4.0.0.106 still works