Copy contact from contact to sim - Touch Diamond, MDA Compact IV General

Hi all.
I got a small problem with my diamomd.I can't copy any contact to sim.When I chose option copy to sim but it grey out and can't do anything with that.Please help.
I using 1.93 WWE rom and 1.00.25.05 radio.
Thanks in advantage

are they contacts stored on the phone, or are they from Windows Live?
Cos i don't think the windows live ones are able to be copied.

Hi.
Those contacts now on the phone.But I can't copy to sim.I can copy all contact from sim to phone but not from phone to sim.

Related

SPV m1500!

Hello all...This may be my first post but i have beed watching the forum for quite a long time!You are doing a great work around here!
I need a big favor from anyone that can help!Does anyone have the original SPV m1500 rom provided by orange and can upload it somewhere for me to download?Or can anyone back up his ROM from a m1500 and upload it somewhere?
And i have question as well and i would be grateful if you could answer this one!
If you haven't CID unlocked your phone and somehow managed to upgrade the ROM with a different make's one (i have one from Qtek 2020i at the moment) will it be blocked by the network or is a matter that the person that i bought it from (over ebay) reported it as lost/stolen?Currently everything works fine apart from the phone bit!It says no service and can't detect any network!(it just says ''unable to read setting from the network.Try viewing settings later or disconnect data connection and try again'').
Any help would be greatly appreciated
sorry double post!server had problems!can a moderator please delete one of them/?
Any help pls!??
Hi,
SPV M1500 same as O2 Xda IIi / Dopod 699 / i-Mate PDA2 / Qtek 2020i and known as HTC Alpine. You can upgrade using any ROM that build for HTC Alpine.
Please check at here about all in one sim unlock tool by itsme
http://forum.xda-developers.com/showthread.php?t=240784
Thanks
Thanx clustered for the reply!
I have already used that thread to upgrade my firmware but i am just asking if i anyone has the original SPV m1500 orange rom available?
The thing is i have done the upgrade without CID unlocking the phone!Everything went ok but the only problem is that now the phone in the signal bar has an exclamation mark and says no service!So i was just wondering if it is the upgrade that ''blocked'' the phone bit of the M1500 or is it something else!
Thanks again
after a lot of search i found in a forum someone stating that :
''RIM check the ROM version and RADIO version before they allow you to connect to the relay. If it's not an approved mix, your device IMEI will be BARRED from the relay.''
is that possible and do you think that's why my phone gives the no service message?
Could anyone suggest any solutions to this?
anyone can help??
HTC Alpine as known asSPV M1500 can be unlocked free. I DID IT
THIS IS THE SIM UNLOCKING FOR HTC PH10D:
follow these steps carefully:
Find and download xdadev all unlock.
if you don't find it ,send me an email to [email protected] and I will send it to you.
-Take the SIM card out of your pocket pc and reboot the phone with no sim card,and no memory card.
-Unzip the file on your HTC Alpine and put the file in My Documents or in Storage ,in the pocket pc.
-Run the application.
the application should disply ,UNLOCK SUCCESSFULL and write details of it in a textfile called xdadevunlock.dll
and place it in My Documents.
-Replace the SIM card ,or put a different SIM card into the phone.
-When prompted for unlocking code input 00000000.
-That's it! ...It worked perfectly on my HTC Alpine ,the so called SPV M1500.
-Do NOT run the application again if the phone has succesfully been unlocked!!!!--there myght be bad things;;just check using a different SIM card,or
even two.and then delete it forever.
-Many thanks to the creators of this program!
In the second part I would like to say to people using Windows MOBILE deviceCENTER in VISTA that in bootloader ,neither VISTA neither this Windows Mobile Device Center does Not detect the phone through the USB cable... but only after a REBOOT . Interesting when the screen says '' tap the screen to begin setup your device'' ,if you don't press anything but just plug the USB, the mobile device center detect the phone and you can see the original Windows files in a folder called ''extended ROM'' into the phone.....
...BUT you cannot copy ,add or delete anything...
Does anyone know how to do to be able to add ,delete ,or copy these files???
HTC Alpine as known asSPV M1500 can be unlocked free. I DID IT
THIS IS THE SIM UNLOCKING FOR HTC PH10D:
follow these steps carefully:
Find and download xdadev all unlock.
if you don't find it ,send me an email to [email protected] and I will send it to you.
-Take the SIM card out of your pocket pc and reboot the phone with no sim card,and no memory card.
-Unzip the file on your HTC Alpine and put the file in My Documents or in Storage ,in the pocket pc.
-Run the application.
the application should disply ,UNLOCK SUCCESSFULL and write details of it in a textfile called xdadevunlock.dll
and place it in My Documents.
-Replace the SIM card ,or put a different SIM card into the phone.
-When prompted for unlocking code input 00000000.
-That's it! ...It worked perfectly on my HTC Alpine ,the so called SPV M1500.
-Do NOT run the application again if the phone has succesfully been unlocked!!!!--there myght be bad things;;just check using a different SIM card,or
even two.and then delete it forever.
-Many thanks to the creators of this program!
In the second part I would like to say to people using Windows MOBILE deviceCENTER in VISTA that in bootloader ,neither VISTA neither this Windows Mobile Device Center does Not detect the phone through the USB cable... but only after a REBOOT . Interesting when the screen says '' tap the screen to begin setup your device'' ,if you don't press anything but just plug the USB, the mobile device center detect the phone and you can see the original Windows files in a folder called ''extended ROM'' into the phone.....
...BUT you cannot copy ,add or delete anything...
Does anyone know how to do to be able to add ,delete ,or copy these files???

WM2003 > WM6 contacts etc problems ?

WM2003 > WM6 contacts etc problems ?
Hey ,
I just loaded WM6 on my o2 xdaIIs or Blue anger as you say,
now i have several issues in front of me:
1. the backup file ( 2 files individually created on WM 2003) from both " spb and x backup (inbuilt in WM 2003) " won't restore any thing i.e. contacts,Apps, notes anything on my new WM6.
i tried restooring from both the files but to no avail.
any solution how to get my contacts back.
Note: i didn't sync with my PC, so no contacts loading from syncing with pc
2. there's no send via bluetooth option in file explorer.
3. when dialing no.s from keypad of BA, the no functionality won't happen. i.e. only alphabets appear, but in WM2003 no.s did appear.
i guess you haven't really completed the upgrade to wm6. you should do the reset + no/yes/yes + mail button routine.
I already did the same, but the problem is from the beginning, is there any way i can get my contacts from the backup files back ???
and what about the keys issue !!! and bluetooth funda !
the only way is to switch back to wm2003 restore ur backup, sync ur contacts or save them on sim than put wm6 again get ur contact back.
Hi,
now i want to downgrade to WM2003,
but going to the wiki gets me confused, b'coz of the several ROM's there.
now the thing is i have O2 xda IIS, India, and i have the official O2 asia WM2003SE ROM downloaded from the website of O2, that has been made for my Mobile only, but now as i have WM6 and i guess while upgrading to WM6, i deleted the contry code etc...., so now the O2 ROM is not detecting my Mobile,
can anybody help me out here !!!
DO THIS
1. extract the file given below.
2. put the rom file which u hv downloaded from the o2 site (file=nk.nba) in the same folder where above files were extracted.
3. put ur pda in boot loader by holding Pwr+camera+rec+reset.
4. screen shows bootloader serial.
5. run maupgradeutilitynoid.exe (it will skip country id)
6. do a update by clicking next next and so on
I have something like this pb on my Qtek 9090. But i think after upgrade the contacts database is crashed cause any CM application terminates immediately after being launched:
NullReferenceException.
at
Microsoft.WindowsMobile.PocketOutlook.PoomStore.Di spoze()
at
Microsoft.WindowsMobile.PocketOutlook.PoomStore.Fi nalize()
ActiveSync refuses to synchronize contacts giving error 8007000E.

What the -? Unnamed unremovable contacts?

Hi everyone,
help me! I see something very strange that I've never seen before. I go into my contacts and there are 5 contacts there called "Unnamed" and there's a sim card icon next to them with a lock. I can't delete them, I can't do anything! What are those? There's nothing in the sim manager. Oh and I'm using the original wm6.1 rom with an at&t sim.
Thanks!
help meeh
anyone? pleeeeeeeeeeeeeeease?
try deleting from another phone?
Do they appear in Outlook when synced to your PC? If so, can you delete them there? If not ChumleyEX's idea sounds like the best course of action...
I had a similar thing happening on an iPod, corrupted songs which can't be deleted
strange
thanks for your replies! i tried to put my sim into another phone and there were no unnamed contacts there. i don't have outlook (ew, i don't like to use it), so i can't look there. i dunno what are those.. agh
Anyone?? I have the same issue and nothing works... Happened when switched to Aserg ROM and then was frequently switching between SIM cards from different countries..
right,
yeah it happened to me when switching between sim cards from different countries too!
does someone know how to delete Outlook databases?
I have old crap there, spb Diary was able to show me a email account folder which doesnt exist anymore for months! All uneccessary data is still stored in \*.VOL files(
solved it by trick I already used before:
1. backup contacts etc
2. rename \pim.vol to \pim.vol1
3. reset
4. delete \pim.vol1
-> Contacts is empty, <Unnamed> entries are gone
doggydog2 said:
solved it by trick I already used before:
1. backup contacts etc
2. rename \pim.vol to \pim.vol1
3. reset
4. delete \pim.vol1
-> Contacts is empty, <Unnamed> entries are gone
Click to expand...
Click to collapse
awesome! thanks, that did it for me too. strange bug or whatever though
this is making me nuts. i have them again. i just switched my sim cards and tadaa.. now i can backup restore again.. is there any way to stop it?
I have the same problem. They showed up after upgrading to WM 6.1 and I can't get them to go away.
I have unnamed contacts on my phone but am a bit confused by what to do to get rid of them
1. backup contacts etc
2. rename \pim.vol to \pim.vol1
3. reset
4. delete \pim.vol1
-> Contacts is empty, <Unnamed> entries are gone
Can anyone please tell me where I am supposed to rename pim.vol? Do I do that on the phone and if so, where do I find it? If I do it on the computer can you please let me know where I locate this \pim thingy
yup, I'm a newbie
pinkdiamonds said:
Can anyone please tell me where I am supposed to rename pim.vol?
Click to expand...
Click to collapse
You can rename it on the phone...use your file explorer and go to "My Device" scroll down till you see a file called pim...rename that...
use PIM backup to backup your contacts, messages etc...
Ever used your SIM in another kind of phone ie Nokia?
Pal of mine had similar problem and it was due to his Nokia saving contacts to the SIM with group info added that is not compatible to other brands (non-standard).
Farsquidge said:
Ever used your SIM in another kind of phone ie Nokia?
Pal of mine had similar problem and it was due to his Nokia saving contacts to the SIM with group info added that is not compatible to other brands (non-standard).
Click to expand...
Click to collapse
yes, but all i do is that i remove my at&t sim, put in a t-mobile sim (for checking sms and stuff) and then put back the at&t again. then it shows up. with other phones (can't try other pda) there are no "unnamed" contacts.
doggydog2 said:
solved it by trick I already used before:
1. backup contacts etc
2. rename \pim.vol to \pim.vol1
3. reset
4. delete \pim.vol1
-> Contacts is empty, <Unnamed> entries are gone
Click to expand...
Click to collapse
It works for me, thanks a lot.
Just by following there steps and there, after a reload from a pim backup file the unnamed disappeard.
doggydog2 said:
solved it by trick I already used before:
1. backup contacts etc
2. rename \pim.vol to \pim.vol1
3. reset
4. delete \pim.vol1
-> Contacts is empty, <Unnamed> entries are gone
Click to expand...
Click to collapse
This trick had worked for me too.
It actually deleted all SIM card contact that had been stored into the phone (device). The \pim.vol is in the root folder of the device. When you renamed it to \pim.vol1 and reset the phone, the phone will automatically create a new \pim.vol which is empty and therefore you are able to delete the \pim.vol1. It is impossible to delete the initial \pim.vol, so doggydog2 actually rename the file and ask the device to recreate another pim.vol.
Thanks a lot, doggydog2!
What if i backup contacts with "Unnamed" as well and after reset and deletion of file reimport backup file? Will i get "Unnamed" contacts again?
Check this out: milospjanic.blogspot.com/2012/07/how-to-get-rid-of-unnamed-contacts-in dot html

[Q] No copy contacts from sim to phone option after updating to Froyo

Hi,
I'm a Samsung Galaxy S user in India and it came with 2.1(Eclair). If i wanted to copy a contact from SIM to Phone, i usually used to go to Contacts>specific contact>Menu and choose the option copy to phone or SIM visa versa whichever was applicable.
Now, i updated to Froyo recently and since then if i have a contact in phone and want to move it to sim card i do not get the same option at the same place. The workaround i have is to create a new contact with the same details again and copy it to SIM.
I'm missing the option badly - any help will be appreciated.
HI
Just download sim contact application from market .
You have option to move both vise-versa.
Regards

transferring contacts from xperia x1i to laptop without using active sync

hi m a proud owner of xperia x1i i'v the following problems:-
1) i've lost the original active sync cd which came bundled with the phone dur to which i'm not able to connect my xperia to my laptop via active sync or windows mobile device centre.
2) i flash roms regularly, so i need to save my contacts in my laptop or make a back up of my contacts.
pz help me out...thanx in advance...
you can download active sync at microsoft.com just google it , otherwise copy all contacts to sim card
There are several solutions for your problem: Backup software like SPB Backup, SK Tools... They create self extracting backup files or backup files that can be restored using the corresponding program (in case of SK Tools). Another possibility is to use a software that exports your contacts to a xml file. And of course you can download active synch from the MS website.
gauravinvouge said:
hi m a proud owner of xperia x1i i'v the following problems:-
1) i've lost the original active sync cd which came bundled with the phone dur to which i'm not able to connect my xperia to my laptop via active sync or windows mobile device centre.
2) i flash roms regularly, so i need to save my contacts in my laptop or make a back up of my contacts.
pz help me out...thanx in advance...
Click to expand...
Click to collapse
you can use PIM manager. unlike spb backup, this is a freeware, and i have been using it for years now. below is the download link
www.freewareppc.com/database/pimbackup.shtml
this saves it on your sd card as

Categories

Resources