I have been running a older version of Dutty's Kaiser ROM for some time with great results, however, I have noticed that my hardware keyboard is slower than it should be. I can press a button and either get no response or two characters typed. Anyone else experience this and know what causes it?
thanks ahead of time,
Levi
Use Disable T9 cab
I also had more performance with different radios and spls
There is a recen thread on this
do you know where the recent thread is? or where the disable T9 cab is located? i did a forum search but turned up too many hits and after reading the first page of hits i gave up.
The problem has escalated!
you know I tried that disable T9/XT9 cabs and tricks, but they didn't help. I investigated further as to why my hardware keyboard doesn't respond correctly. I think that I have found that is is strictly a hardware related issue. Only a few of the buttons on my device have this problem, and their not really slow, they just don't type each every time I press them. I also found that the harder I pressed those problem buttons, the more likely it was to actually type them. I might end up trying another ROM and hard resetting the device but if not, I may try taking the device apart and cleaning the keyboard, I suppose I have just typed it to death! If all else fails unless anyone else has suggestions, time for a new phone. Anyone else have this problem with the Kaiser, and another thing. Have a kaiser?, look at the front of it and inspect the shiny button cluster. Does your button cluster move about the opening sort of loosely jiggling around? hmmm........ mine does!
Levi
this is a known issue with alot of ROMs that are made from the AT&T OEM rom.
blacksage said:
you know I tried that disable T9/XT9 cabs and tricks, but they didn't help. I investigated further as to why my hardware keyboard doesn't respond correctly. I think that I have found that is is strictly a hardware related issue. Only a few of the buttons on my device have this problem, and their not really slow, they just don't type each every time I press them. I also found that the harder I pressed those problem buttons, the more likely it was to actually type them. I might end up trying another ROM and hard resetting the device but if not, I may try taking the device apart and cleaning the keyboard, I suppose I have just typed it to death! If all else fails unless anyone else has suggestions, time for a new phone. Anyone else have this problem with the Kaiser, and another thing. Have a kaiser?, look at the front of it and inspect the shiny button cluster. Does your button cluster move about the opening sort of loosely jiggling around? hmmm........ mine does!
Levi
Click to expand...
Click to collapse
I second both observations.
On my keyboard, it's the R and H buttons that are unresponsive. As to the shiny button cluster, mine moves too. But not as much as my friend's TYTN II does.
spip72 said:
I second both observations.
On my keyboard, it's the R and H buttons that are unresponsive. As to the shiny button cluster, mine moves too. But not as much as my friend's TYTN II does.
Click to expand...
Click to collapse
You may want to check your key repeat speed and delays in settings->buttons. I had mine set to lowest delay and highest speed. I tried to double the delay, and reduce the speed to less than half. My keys seems to work a little better now (but i've just been testing for a few minutes).
jiggly buttons
my hardware buttons jiggle around a lot. they still work fine, but yes I believe they are just jiggly by poor deisgn.
Related
Just wondering if anyone else's Tilt is acting up like mine, the keyboard when sending texts will sometimes miss a good bit of key presses and I have to go back 3 or 4 times to register the key.
It worked fine at first so I figured it was something I did so I tried a hard reset and after about 30 minutes it started again.
yup - my keyboard has been crappy since day 1. i often miss key presses and the 'click' feedback isn't there on some presses.
never had a problem with my 8525s - had 3 of them and the keyboard was always flawless.
waiting for a store to get more stock so i can see if have a faulty keyboard.
yeah i have strange problem with my keyboard too. it only seems to be missing key presses for double-letters, like the 'pp' in 'happy' or 'll' in 'hello'. the second letter sometimes doesn't show up.
its strange because typing things like 'apapapapapapa' quickly over and over again, it doesn't seem like any of the letters are getting dropped.
rking84 said:
yeah i have strange problem with my keyboard too. it only seems to be missing key presses for double-letters, like the 'pp' in 'happy' or 'll' in 'hello'. the second letter sometimes doesn't show up.
its strange because typing things like 'apapapapapapa' quickly over and over again, it doesn't seem like any of the letters are getting dropped.
Click to expand...
Click to collapse
is this with the AT&T rom? the HTC rom? or both?
this is the at&t rom, without the bloatware installed.
With all the crap that AT&T did to their ROM, I don't know why anybody on here uses it. I had it for half an hour before I couldn't stand it anymore and switched to the HTC ROM.
same bug with german t-mobile rom... its like the device is busy.
unfortunately the same on HTC Tytn II German Rom too.
so is this a defect with the hardware or the software? i dont want to bother exchanging it if it happens on every device.
disable word complete and auto correct and see if it works a little better
did for me
dld
I experience missed key presses but rarely. I do however experience a probelm when using shift quite a bit. If I want to capitalize a letter I hit shift and then type the word, sometimes it will also capitalize the second letter. So Happy would be typed out as HAppy. It's annoying going back to fix it!!!!!!!!!!
RacerX10 said:
disable word complete and auto correct and see if it works a little better
did for me
dld
Click to expand...
Click to collapse
Disabling these solved it.
decepticon said:
Disabling these solved it.
Click to expand...
Click to collapse
didn't work for me. German HTC ROM. Only happens if double letters are typed quickly. second letter gets lost. it is definitely a bug!
I noticed that the "C" button I have to press harder to get it to work.. I'm going to see if I can have my tilt replaced ..
Just info no solution.
Using HTC shipped ROM
There are two issues outlined: Repeated letter getting missed and Shift causing capitalization of second letter as well as the first.
Issue one I cannot reproduce even with auto correct and word completion set to on. No matter how fast I get the letters in, both letters appear. The implication is that it may be a ROM issue, but also of course may be due to other apps installed. Less likely to be hardware, except in as much as some people may be pressing less firmly for the second letter???
The second issue where after pressing shift two letters instead of the first only are capitalized. I can reproduce this but only under fixed circumstances:
1.
There needs to be a clear release of the first letter before the second is pressed. So for example if you hit (shift) then an "A" with your left thumb and "L" with your right thumb the both letters will be capitalized if you are still pressing the "A" when you hit the "L". Never will it then give a third capitalized letter because clicking the second letter cancels the (shifT) key.
2.
If the first letter and the second are very close together say "D" and "E" it is possible to move from one to the other without releasing the first and again both letters will be capitalised.
So in conclusion I think this happens when either the letters are imediately adjacent to each other or if the first letter is not being released fast enough ie before the second one is pressed (easy to do if you are using two fingers to type quickly)
Mike
ya, this is an issue with the kaiser and the tilt (i've owned both). It was the samew ay with the blackjack. This is VERY annoying and i would LOVE to find a fix for it.
Thanks,
re: Mike
thanks for the test. it does seem like it would be a software problem, but i have installed both the att and the cooked rom from the kaiser upgrading forum, and they both have the double-letter problem.
i tried it right after i loaded the cooked rom, so i dont think it would be any software i loaded. and whether auto-correct/word completion on, it happens.
anyone else have any ideas?
alaiwy said:
ya, this is an issue with the kaiser and the tilt (i've owned both). It was the samew ay with the blackjack. This is VERY annoying and i would LOVE to find a fix for it.
Thanks,
Click to expand...
Click to collapse
double letter or capitalization issue?
the double letter is the only issue i have with the keyboard and it makes me crazy.
alaiwy said:
the double letter is the only issue i have with the keyboard and it makes me crazy.
Click to expand...
Click to collapse
some just posted this in howardforums:
have you tried changing this?
Start->Settings->Buttons->Up/Down Control and make the delay short.
i tried it and it seemed like it made it better? it doesn't seem to refer to the keyboard but it works i think...?
Hello fellow Kaiser users,
I don't know if this happened only with me or others have experienced the same.
TyTN II keys on the QWERTY after a year of use has some keys responding after the 2nd or 3rd stroke of the key.
Did anyone else experience this?
Is there a solution?
It is really bugging me when I'm typing an SMS or typing something down.
Any suggestions are appreciated.
Hardware suggestions also I will try on my own risk.
fireblade63 said:
TyTN II keys on the QWERTY after a year of use has some keys responding after the 2nd or 3rd stroke of the key.
Did anyone else experience this?
Click to expand...
Click to collapse
Same problem here, but I started noticing it after 4/5 months of use. Would like to know about a solution also.
I feel your pain, this is what is really killing me because the keyboard is a very big part of the phone, and I've only been using it for 7 months. If i knew it would become this unresponsive i would of got an i phone because this phones on screen keyboard and transcriber is useless.
It happened to me after 7 months. The "c" key on my tilt started to become unresponsive so I called up at&t and had it warranty exchanged for a refurb. This second one was already even worse than the one I'd just sent back, so I had them send out another one. This third one is fine, although the "c" key (again, oddly enough) doesn't click like the others. It's responsive, but feels a little different. I didn't feel like going through the exchange process again, so for now I'm living with it.
My 1 month old refurb tilt doesn't type the keys when I press them sometimes. I should have that fixed. I thought it was a software problem...
My brand new XPS M1530 does the same thing sometimes. I guess I reckoned it was just me not pressing on the keys hard enough or something like that...
So I'm not the only one with the problem...
But no solution?!
Even a hint of what might be causing this would help..
have you guys tried using the disable XT9 cab ?
yes
I think it is H/W cleaning related
How to clean is the deal...
you can find disassembling guides on mikechannon's web. just follow the disassembling instructions and after you remove keyboard, try cleaning it.
Same problem for me.
I'm always very carefull with my device, and don't use the hardware keyboard very often.
Now for some letters I really have to press harder to make them work.
I have my device for only 6 or 7 months.
Have had my Kaiser for 6 months now and the Y and B keys are starting to go out. For the past couple weeks I have been considering sending it in for warranty exchange but I have taken very good care of my Kaiser and worry about what I would get back...
Anyone eager enough tried disasembling and cleaning?
Moreover, did it work?
funny thing here is that I get more unresponsiveness in the right side of the keyboard (enter; L; P; direction keys).
It is a real pain...
Most prolly will do it soon
Will let you all know of the outcome
Same here.
Had mine 8 months, the W key is worst, takes a really heavy press to get it to work, has been like that for about 5 months.
Now the B is also getting bad, so is the S.
If i'm likely to get a refurb back i guess i'll just put up with it until my contract is up.
I'm facing the same problem on my HTC herald. HTC keyboard quality has gone way down. I never faced such problem when I had htc universal.
Hey man,
since you had quite some ppls share of PPCs;
did you disassemble any of them before?
Do you think it's a good idea to do it myself?
I'm extra careful normally but I'm having doubts
kdskamal said:
I'm facing the same problem on my HTC herald. HTC keyboard quality has gone way down. I never faced such problem when I had htc universal.
Click to expand...
Click to collapse
Similar problems here with my Tilt. FN, CAP/SHIFT, N are all problematic for me.
Has anyone tried a spray liquid electronic "contact cleaner" on a device like this before?
Weird
Oddly enough, I have had this problem a little bit with mine as well. However mine is the space bar. I, like many others I am sure, have hopped from ROM to ROM. When I changed ROMs the last time, it seemed to fix the issue. It was really weird because a lot of the times I would type something, and the letters would turn out something like this:
Iw antt oe at atj oes.
Like I said, I just swapped ROMs and it seemed to fix it. maybe the t9?
killerbeans said:
Oddly enough, I have had this problem a little bit with mine as well. However mine is the space bar. I, like many others I am sure, have hopped from ROM to ROM. When I changed ROMs the last time, it seemed to fix the issue. It was really weird because a lot of the times I would type something, and the letters would turn out something like this:
Iw antt oe at atj oes.
Like I said, I just swapped ROMs and it seemed to fix it. maybe the t9?
Click to expand...
Click to collapse
You are correct sir! Just run "disable xt9" (found plenty of places on the kaiser forum) and your problem should be fixed.
I too have had this problem. I noticed it with the d, r, and space bar keys. Interestingly enough the keys that i press often (Take A for example [I have it mapped to the A button in PocketNesterPlus]) aren't hard to press at all. What I'm trying right now is pressing the problem keys over and over again to see if they "loosen up". Best Case Scenario: It works. Worst Case Scenario: I ruin an expensive piece of equipment.
Update: This might be working. To test which keys were unresponsive i typed abcdefghijklmnop.... without exerting any extra effort. The keys w and r didn't show up so i kept working them. I repeated the test and I got r to work. perhaps i am unknowingly pressing r harder, or perhaps not.
Ive noticed that when ever I press the end button, it presses right instead sometimes. this doesnt seem to happen to any of the other buttons.
This also happens when it is either really cold or hot (due to using it with the charger and wifi running with performance set to high) but only with the end key.
I dont remember it being like this and I've had it for a couple of months now although I could be wrong since I hardly use the end key. Does anyone know if this is common or what could be wrong?
Im on orange in the UK and have the original updated 1.93.405.1 Rom.
On a side note (instead of opening another thread):
I used AdvanceConfig to change the startup animation but it doesnt work properly and comes up as a white screen. If I go to 'HKLM\Software|HTC|StartupAnimation' it is blank inside with no values. I know it wasnt like this before because I previously disabled the startup sound by changing a key that was present in this directory.
Could someone post the values which are inside 'HKLM\Software|HTC|StartupAnimation' please?
I also have this problem. Every now and again the end key acts as the right key. Very frustrating when trying to end a call.
Thing is it only happens every once in a while and ( as far as i can tell at random ) so i'm questioning the software rather than the hardware.
I'm seriously considering sending the phone back cause this is one of the key functions of a phone surely lol.... I'm also on Orange with the latest official rom, i'm considering flashing a custom rom to see if it makes any difference.
Solution here: Edit, wrong url...
Same problem here, but happens when I do a long press on the end key. It's intermittent though.
espenjoh said:
Solution here: Edit, wrong url...
Click to expand...
Click to collapse
DO you have the correct URL then
This is really bugging me, does this effect anyone else?
Yeah, using the end key to lock is when I notice it the most and when it gets most annoying. It is weird that it only happens with the end key and not the other 3.
Also, Ive got a protective film over the whole of the diamond so Im thinking maybe this reduces the sensitivity? What about the rest of you? Do you use a protective film on the capacitive part too? BTW, Im using a Martin field screen protector.
im having this problem with every rom i flash..so its not rom problem..it is in the device itself
I've only got a protective cover on the touch screen not the keys so thats not an issue.
There must be something we all have in common as it would be more widely reported.. happens for me quite frequently when trying to lock the device and it returns to normal if i just leave it for a while... very strange.
Official Rom HTC and am on Orange UK handset?
What are other people on?
When I get a phonecall the buttons flash as usual, but the end key button does not flash. It´s ligts up and does not flash.
Changed rom but the same. I think it is a hardware problem, What do you think?
Thanks for responding
Omission said:
Official Rom HTC and am on Orange UK handset?
What are other people on?
Click to expand...
Click to collapse
Yeah, can people tell us which network their on if your having trouble with the end key and which country? could it be problems with early batches?
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
might be "m2d" not compatible ... hair wired ..
I wonder ..whether we can install window CE from pc to h/p through usb link ...
"Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts"
r u using original usb cable ..b'cos now a day I saw many only using normal "small" usb cable head which easily spoil the connector at phone ... too loose for that sharp..
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Go to Start/Settings/System/Clear Storage
and your usb is probably whack
@kaiserII...your usb is whack, haha. that **** made me laugh.
having same exact issue
ya it happened to me sunday night, having exact same problem. keyboard doesnt work, and my front buttons dont work exept for the the center button which ends up opening the start menu (wrong command). Im over my 1 year warrenty and not sure what to do. Had to buy a cheap 40 dollar nokia for the time being, please help if someone can. Oh and I did a hard reset, and it didnt fix anything. Booted android with it and 1 out of 5 times the buttons came back, this is really weird/vexing.
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Exactly the same thing has happened to me!! Coming on randomly, draining the battery really quickly and the same keys doing the same things as yours i.e. nothing or Start menu. The backspace and space don't work on the on-screen keyboard either. Is it the end of the road or has anyone the slightest idea what the hell to do!?!?!?
Same issue but slightly different
2 days ago I started hearing a noise from my phone that was not something I normally hear. After checking my phone I found out it was the voice recorder program opening up on its own. It started repeatedly doing this and recording automatically. I had to hold down the close option (X) and before it would stop. AFter a reset and when the phone wakes up it always does this now. Along with all these whacky problems my hard buttons stopped working. My scroll wheel and D-pad sometimes work and only the up, down, left and right arrows work on the keyboard. Camera button seems to work sometimes also. All others have stopped responding. Except for holding the power key. I just reflashed my phone to latest phoenix ROM and problem is the same. Is this it for the phone or is there a fix.
Anyone??? Please!!
Try this free fix
I had the same problem as the original poster. My fix was to download AE Button Plus trial and use it to reset my keys to their original setting. I did not have to do the keyboard, just the external keys. Now my tilt works like it used to.
This fixed the problem when clear storage and reloading roms did not.
It doesn't hurt to try since the trial is free.
Good Luck,
Will
same here... help pls...
any one yet has found a solution for this issue??? 2days ago my Kaiser suddenly started with same problems, buttons dont work and the recorder goes on, any one yet found a way to fix it??? thanks...
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
didnt work...
dantegl36 said:
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
Click to expand...
Click to collapse
thanks anyways "dantegl36" but it didnt work...
I have the same issue
This is intresting, I just posted on this, as I am having the same issue, which of course just started a few days ago. I have the updated UI as well but I installed it as well.
Any idea how to fix it??
keyboard fix "edfc" problem
yes , kaiser tweak slide wake disabled ...it OK
Greetings from Olsztyn Poland
Unfortunately, the problem returned it was only a temporary improvement, sorry
For my tytn2 after rom upgrade, the front buttons do not respond except the central one. the side buttons are responding under the win only but in the bootloader screen they don't respond. and I cannot make a hard reset.
I did a hard reset through the setting menu but still the problem has not been solved. Adding on that the keyboard doesn't work except the arrow keys.
Do anyone can figure a solution for that. except the hardware problem bec I am out of warranty.
Did anyone was able to solve the problem fully?
oo wow, i have the same problem. hope theres a fix
adding to that the the bluetooth is turnino on by itself even if I switched it off and the device by itself after time of switching it off it refuse to start again unless I did a soft reset.
I tried all the avilabe suggestion but nothing worked.
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
samstables said:
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
Click to expand...
Click to collapse
can I know how did u mange to change the rom? bec even my side buttons refuse to work whenever I am at the bootloader screen and the upgrade through the active sync failed.
I know it's been said before i've googled it and stuff but when the delete key is hit on my keyboard i get a JHGL and a volume lower key and if i hit the back key on my phone i get a U542i3 input. the phone has NEVER been dropped in water and it just started happening randomly.
is there any solutions i can do myself to open it up and fix it? Im not covered under warranty so that's not an option for me.
ryohazuki said:
I know it's been said before i've googled it and stuff but when the delete key is hit on my keyboard i get a JHGL and a volume lower key and if i hit the back key on my phone i get a U542i3 input. the phone has NEVER been dropped in water and it just started happening randomly.
is there any solutions i can do myself to open it up and fix it? Im not covered under warranty so that's not an option for me.
Click to expand...
Click to collapse
You can take it apart and clean it.
But first, I would investigate possible SOFTWARE issues. Wipe it clean and load a new system on it.
Yeah, my friend gave me the phone stock when it had the problem then I wiped it flashed it etc and the problem still occured.
Can you confirm if this worked? I have a similar issue:
I have a similar problem but not as severe. Almost all buttons work ok, just the buttons in the middle of the hw keyboard like y, h, b and space sometimes print other stuff, b sometimes writes a few characters and opens up the search, n sometimes writes some characters with an 'enter' in between etc. and these random outputs are usually the same, ie I get the same stuff by pressing b over n over again. They work fine after some pressing, and I've noticed if I press these keys immediately after pressing something else, they work fine. The problems has persisted through rooting, flashing, radio change, bootloader change etc. Anyone know what this problem is? Is it a hardware issue should I get it checked? The hardware guys here charge so much I have to be sure before I take this to them. Any way I can correct it myself? Any help would be appreciated.
Click to expand...
Click to collapse
Please let me know.
My torx tools aren't small enough so I haven't bought a pack yet to actually try it yet. Im really interested in fixing this G1 so im not sure yet what to do.
Hi ryohazuki!
ryohazuki said:
I know it's been said before i've googled it and stuff but when the delete key is hit on my keyboard i get a JHGL and a volume lower key and if i hit the back key on my phone i get a U542i3 input. the phone has NEVER been dropped in water and it just started happening randomly.
is there any solutions i can do myself to open it up and fix it? Im not covered under warranty so that's not an option for me.
Click to expand...
Click to collapse
I'm pretty sure it's a hardware problem.
On HTC Dream there are several GPIO's involved with scanning the keypad, hardware keys and trackball sensors.
These GPIO's of the SoC (MSM7201A) inside are connected to 4-line ESD circuits to protect the chip, prevent voltage peaks and stuff.
Please have a look at this post or read the whole thread.
I found out that these circuits might be harmed by some electrical effects. As a result some of the GPIO's are shorted and affect the behaviour of your device in a strange way.
It's not sure what exactely causes this short circuit... maybe some peak voltage while using the wall charger or some strange inductive effect.
Maybe these protection circuits are little bit weak concerning electrical specs.
Whatever, as you might see at the date of my posts in that thread, i fighted several weeks to solve this issue and i'm pretty sure it's the same effect that causes your device to go mad.
Regards,
scholbert
I have this exact issue. I can rework/solder very small parts and would be willing to try your fix but I really don't think it can be a hardware issue, one because everyone gets the same gibberish and two because all keys function normally in recovery console. What am i missing?