Hey Guys,
I upgraded to the 6.1 solely for the threaded SMS feature. I've noticed though that it's responding a lot slower compared to before the upgrade. I didn't install AT&T bloatware. Another thing I've noticed is that the touch is significantly inaccurate compared to before. Now it's a task to type in a number (using the stock dialer or even a better one). It was much better before the upgrade.
Anyone seem these issues too?
ive been having the same problems. plus my keyboard is really slow and sometimes doent register what i press. have you noticed that about yours?
i had the same issue.
i got rid of it after having that rom for 11hrs ..
i was reading earlier that there was a clean version of that rom floating around.. search and see what u come up with
zlamma said:
ive been having the same problems. plus my keyboard is really slow and sometimes doent register what i press. have you noticed that about yours?
Click to expand...
Click to collapse
Yup.. have the exact same problems.. haven't really installed a lot of programs tho.. I'm surprised that updating to 6.1 would have this many problems..
Same problem here after official upgrade for a german kaiser.
Same problemi with italian official ROM.
I try to upgrade to non official rom but there is same problem.
zlamma said:
ive been having the same problems. plus my keyboard is really slow and sometimes doent register what i press. have you noticed that about yours?
Click to expand...
Click to collapse
I have the same thing. Just noticed that it's mostly the "h" and "r" keys that miss a key press. Doesn't really make any sense. If I just press them repeatedly, like "rhrhrhrhrhrhrhrh" it comes out like "hrhhhhrhrhhh". Really annoying.
I don't think you mentioned what ROM you are using. There are issues with 6.1 if you have not updated your SPL. Please search out Jockey SPL. Go to the Kaiser Development forum, http://forum.xda-developers.com/forumdisplay.php?f=378, and read in there a bit.
I have been using the ROMeOS ROM, which is 6.1, and have not had any issues at all. There are other good ones in the Kaisder Development forum, too. So you can pick out what you like. You can get a good 6.1 ROM. The issues are not with the ROMs, they are often with either the SPL, the radio, or third party apps. Good luck.
kimtyson said:
I don't think you mentioned what ROM you are using. There are issues with 6.1 if you have not updated your SPL. Please search out Jockey SPL. Go to the Kaiser Development forum, http://forum.xda-developers.com/forumdisplay.php?f=378, and read in there a bit.
I have been using the ROMeOS ROM, which is 6.1, and have not had any issues at all. There are other good ones in the Kaisder Development forum, too. So you can pick out what you like. You can get a good 6.1 ROM. The issues are not with the ROMs, they are often with either the SPL, the radio, or third party apps. Good luck.
Click to expand...
Click to collapse
As I mentioned in the first post, I'm using the official/stock ROM from HTC's website..
did you hard reset after install?
Not atreofan released stripped down official att 6.1 and from the looks of it seems to be great, might try it
"As I mentioned in the first post, I'm using the official/stock ROM from HTC's website". Yeah, I guess I missed it in the title, duh.
You might want to check out the rest of my post, though. Maybe something in there that can help out, i.e. SPL, radio version, a different ROM.
Maybe get the stock ROM from XDA rather than the HTC site and try again. What have you done to the phone so far? What version of SPL do you have? What radio?
Not really made any other upgrades. How do I check the versions of each?
From System Device Info ->
ROM version: 3.57.502.2 WWE
ROM date: 7/17/08
Radio version: 1.65.21.18
Protocol Version: 25.88.40.050H
I also use the official htc rom as well as hardspl (used to unlock my phone):
3.28.407 ger
1.65.17.56
25.83.40.02H
I have the same problem also. I actually have to think about typing slower. If I type to fast, the tilt will miss letters.
Interestingly, after I upgraded my Kaiser to 6.1 using the official Orange upgrade, I have the opposite effect.
Everything seems faster (especially typing).
Are you guys using the correct SPL for the ROM version you have? Unilke 6.0 ROMS, it is suppsed to affect performance noticeably in 6.1.
How can I find out which SPL version I have? Which SPL should I be running?
kgeissler said:
How can I find out which SPL version I have? Which SPL should I be running?
Click to expand...
Click to collapse
To find out which SPL version you have, hold down the camera button and soft rest. IT will bring you up to the bootloaded screen. The SPL version can be found there. Just soft reset again to get out.
Now regarding, which SPL version you should use, it might be better if you post that qustion in the ROM development thread of the ROM you are using (if cooked). If not, then I'm not sure... Hopefuly someone more knowledgable will hop in and enlighten us
Have a look at the following two threads though:
http://forum.xda-developers.com/showthread.php?t=395836
http://forum.xda-developers.com/showthread.php?t=396922
alt236 said:
To find out which SPL version you have, hold down the camera button and soft rest. IT will bring you up to the bootloaded screen. The SPL version can be found there. Just soft reset again to get out.
Click to expand...
Click to collapse
SPL version is 3.56.0000
It also said CPLD-8
Thanks for the input..
I had installed hardspl, now reflashed the original kaiser spl and the issue is gone.
Related
Okay I am a newbie and I installed the Mr Clean rom which is fine but how would I install the previous rom I had witch was the one from the HTC website? Basically all I am tring to do is change my splash screen and I have no idea how but I want the old rom but it doesn't seem to want to let me roll it back.
OK newbie, try searching the forum for your solutions first - you will be surprised what you might find. :wink: This took me less than a minute to locate.
http://forum.xda-developers.com/viewtopic.php?t=52768
Basicly Faria has put together a bunch of different splash screens which will install in exactly the same fashion as a new ROM would. As it only loads a new slpash screen you will not lose any data. You will also be able to keep the Mr. Clean ROM but have a different splash screen. There are at least 2 HTC splashes listed and the one that I had a quick look at has a preview so you can see which one you prefare before you do the install.
Enjoy...
But is it possible to go back to an older/different rom once you install Mr Clean rom? I currently have a K-jam running the lattest rom, and was thinking about trying Mr Clean rom just to see how it behaves. The only think stopping me is what if I don't like it! Would it be possible to revert back to my current rom?
Can't see any reason why it shouldn't work. As far as I know none of the home cooked ROMs available on the forum have a function that does a compare between the existing and intended ROM versions and prevents any downgrading.
As to whether you will like the newer version, it is hard to see why you wouldn't. Mr Clean's version is spot on if you want the latest OS, the best Radio ROM and a very light extended ROM and with you changing your splash screen to one you like you should be sorted. All you need is to install whatever cab files you need for performance tweaks or network settings.
jt_armstrong said:
Can't see any reason why it shouldn't work. As far as I know none of the home cooked ROMs available on the forum have a function that does a compare between the existing and intended ROM versions and prevents any downgrading.
As to whether you will like the newer version, it is hard to see why you wouldn't. Mr Clean's version is spot on if you want the latest OS, the best Radio ROM and a very light extended ROM and with you changing your splash screen to one you like you should be sorted. All you need is to install whatever cab files you need for performance tweaks or network settings.
Click to expand...
Click to collapse
Well it doesn't! :S Once you use Mr Clean rom you can not go back to the official Kjam rom! My only problem with the Mr Clean rom is that there is somewhat increased consumption compared to the rom I had before! Oh well! I guess I'll just have to get used to it!
petrosk73 said:
jt_armstrong said:
Can't see any reason why it shouldn't work. As far as I know none of the home cooked ROMs available on the forum have a function that does a compare between the existing and intended ROM versions and prevents any downgrading.
As to whether you will like the newer version, it is hard to see why you wouldn't. Mr Clean's version is spot on if you want the latest OS, the best Radio ROM and a very light extended ROM and with you changing your splash screen to one you like you should be sorted. All you need is to install whatever cab files you need for performance tweaks or network settings.
Click to expand...
Click to collapse
Well it doesn't! :S Once you use Mr Clean rom you can not go back to the official Kjam rom! My only problem with the Mr Clean rom is that there is somewhat increased consumption compared to the rom I had before! Oh well! I guess I'll just have to get used to it!
Click to expand...
Click to collapse
Why can't you go back? I've run every ROM sumitter has released. Over the weekend I installed the Mr. Clean ROM . Put on the PDA Mobiz version yesterday. I just went back to the original Cingular 1.08 successfully this morning to double-check this response. IPL, SPL, GSM and OS reflecting changes each time. Now I'm going "back" to sumitter's test2. If you unlocked you SID/sim initially you shouldn't have any problems regarding this. faria documented the procedure back in April.
(yes I love flashing my phone)
I can't believe that the Kjam is that different.....
Steven
chow
Well I must have done something wrong then as my SPL is stack at 2.24! I can use the downgrade rom but then can not upgrage to anything but mr clean!
Well I must have done something wrong then as my SPL is stack at 2.24! I can use the downgrade rom but then can not upgrage to anything but mr clean!
First you need to download and install Button's 1.05 at ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe . Make sure to allow the extended ROM's to execute. All problems solved as Pinhead said.
Original thread is at http://forum.xda-developers.com/vie...&start=0&sid=07fe38f7fd43a39238c55d01410a0940
Good luck!
Steven
chow
did someone tried the dopod wm6 rom on an HTC 3600?
Thanks
I did.
Works very well for me. No bug at all. I'm happy with it.
what about the fix time of the GPS?
any changes in speed of the whole system?
and the battery life time?
Thanks
gerazzo said:
what about the fix time of the GPS?
any changes in speed of the whole system?
and the battery life time?
Thanks
Click to expand...
Click to collapse
I've upgraded my P3600 to WM6 (Australian ROM)
GPS - First detection is slow IMHO. After that it runs great.
Changes in speed - No changes so far I have noticed, in other words it still runs fast
Battery life - Is great depending on your usage. Just disable your infrared. That alone makes a lot of difference.
Where did you get the image ROM?
What is the difference between DOPOD and HTC Australian ROM?
Thanks
gerazzo said:
Where did you get the image ROM?
What is the difference between DOPOD and HTC Australian ROM?
Thanks
Click to expand...
Click to collapse
Does it matter where I got it from?.. Or do you want to know where you can get it?..
http://rapidshare.com/files/42337174/D810_ANZ_WM6_Upgrade_20070709.zip
I do not know what and if there is a difference is between DOPOD and HTC Australian ROM.
I just know that the ROM I used didn't have customized DOPOD screenlogo's/programs etc installed AND that I have only one issue since running this ROM but I think it's WM6 related:
http://forum.xda-developers.com/showthread.php?t=318013
All the OFFICIAL ROMs providing wm6 for trinity, so far, are from Dopod, including the rapidshare link above.
This is why it's called: 'D810' and not HTC P3600 in the link.
You may notice very few Dopod's customization, but it's still a ROM from Dopod, you can see, for instance, some Dopod's ringtones in the alarms and ring lists.
As far as the localized operator settings are concerned, I can't tell, since I did not install their extended ROM, I don't have any either, except for the ring tones I just mentioned before.
Regarding the new ROM performances, I think it has increased a lot from the previous April wm5 release from HTC: faster, better look etc.
The GPS is a little bit faster, but not much faster, but I think it has more to do with the new radio.
For example I could not get any fix with the 1.46.00.01 one from SEA. But it works quite well with the 1.46.20.01, from ANZ.
The most impressive improvement is the wifi connexion, which is stable, and fast. (it was a disaster with previous radios, especially the 1.38.x series.
Just to make myself more clear:
1)
I know all the trinity ROMs are made by HTC. What I meant is not 'made by Dopod' but, branded, designed for Dopod.
2)
I have read here before that wifi has nothing to do with radio but just with the ROM itself. I don't know, but what I can tell is that, the previous wm5 plus 1.38/1.41 radio series had always given me poor wifi performance.
But wm6 with 1.46. series is perfect in terms of wifi perfs.
At last do you think that flashing with an official ROM (Asian or Australian doesn't matter) i will not have any king of strange problem like with the wm6 coocked roms?
I want wm6 but i want all the features work on the device too.
Thanks for your patience, but i'm going to buy my HTC p3600 nad i will do only if i can have a perfectly working WM6 device with working GPS.
Thanks
gerazzo said:
At last do you think that flashing with an official ROM (Asian or Australian doesn't matter) i will not have any king of strange problem like with the wm6 coocked roms?
Click to expand...
Click to collapse
No, there are no garantees.
I want wm6 but i want all the features work on the device too.
Click to expand...
Click to collapse
I use the Australian ROM and all the features of my P3600 work.
Thanks for your patience, but i'm going to buy my HTC p3600 nad i will do only if i can have a perfectly working WM6 device with working GPS.
Thanks
Click to expand...
Click to collapse
Since there are no garantees there is a choice to be made. The P3600 is still unique in his features. It's the ONLY Window Mobile based PDA with 3G enabled and GPS onboard.
And what you do want to consider is that even if HTC releases a WM6 for Europe, there are no garantees that the ROM won't have any flauds.
Exactly, there is never 100% garantee to be fully satisfied and get no default or bug. This is why the reseller is there to offer you a one year garantee, so if you fancy the specs of the device go for it.
I don't want to start any debate about which programmers have more skills and more time to do proper job.
Individual ROM cooks are amazing and none of us will ever reach their skill levels, and they do it for free, just for the pleasure of sharing with us, so we owe them the greatest respect for that.
But obviously , after having tried both, I confirm that there are less conflicts and bugs in the official ROM than in the cooked ones.
Also because they take more risks by adapting applications that where not designed for the device (ex: touchflo and kaiser interfaces in trinity)
But I do believe that new cooked ROM from now on will be far more reliable than they were in before (wm6 ones), mainly because they now have a stable basis (the official dopod release) to make their own developments on.
So the difference might be slighter and slighter in those respects.
Explicit instructions for a dummy
Does this ROM update go as easy as the GPS unlock update?
I've done ROM updates that made you go through several activities and I just screw them up.
I'm looking for the simple version.
Jerry
Tried this and no luck
I have an HTC branded and unlocked P3600
I got this error:
Error 294 - Invalid Vendor ID
This update utility cannot be used for your PDA Phone.
Ideas?
No, it is not as easy as the GPS update ROM, and cannot be compare as you just experienced it because:
- it's not a HTC release, it's a DOPOD release, aiming at Dopod D810 clients, from South-east Asia and Australia-New-zealand.
- the ROM is heavy protected by its SPL to not install onto other CID devices.
- The previous Hard-spl crack doesn't work anymore and if you try to install it: luckily u'll get an error it will refuse to install, unluckily, it will get stuck in the middle of the install and you might even brick your device.
That's why you could not manage to install it. There are plenty of topics over this issue on this forum, you can try one of those workarounds, but take all responsibility if something unlucky happens during the upgrade process.
By the way: SIM unlocked, doesn't mean CID unlock, you can install any SIM card you want from any provider, but your phone's CID still belong to a language, a geographical area, and a manufacturer, which is HTC, not DOPOD ;-)
Come on guys...
read and use your brain..!!
Use this SPL:
http://forum.xda-developers.com/showthread.php?t=293632
and flash this rom. works for me like a charme. I've an normal HTC P3600 German Version - no special unlock.
Pinocchios
pinocchios said:
Come on guys...
read and use your brain..!!
Use this SPL:
http://forum.xda-developers.com/showthread.php?t=293632
and flash this rom. works for me like a charme. I've an normal HTC P3600 German Version - no special unlock.
Pinocchios
Click to expand...
Click to collapse
no chance without spl bla bla stuff?
i just want to excute and install :-(
that is it..
read the link I gave you. it is very simple.
copy this file to your pocketpc and execute it! works in 10seconds..
I clearly should do more reading before attempting this
Well, from you link, i can see that the boot unlocker works but i can't get back to my device because it's stuck in a boot loader rainbow screen.
How do i get it back to the OS?
I told you so...
1)
Don't think it's easy and simple, every one got different skills and experience and you don't help the noobies by saying "flashing a SPL protected ROM is 'easy and simple, just use your brain'...
Better being warned of the worst, if you want to do your best...
2)
There is a sticky thread in this forum about 'how to unbrick or unstuck you phone after having failed to flash the Dopod's ROM.
Read it CAREFULLY and try it out.
3)
Next time you try, use Olibro SPL or, more simple and safe for beginners, try to flash a ROM without SPL/IPL.
hitekfun said:
Well, from you link, i can see that the boot unlocker works but i can't get back to my device because it's stuck in a boot loader rainbow screen.
How do i get it back to the OS?
Click to expand...
Click to collapse
can you give more info on where you're stuck? (what is shown on bootloader screen). i'm assuming you've tried a soft reset to exit bootloader...
it's not that hard to flash a rom, the official dopod wm6 included. follow the guide here which will allow you to flash it without the new spl. it's still recommended to flash hard spl before a ROM flash to be safe.
Hi!
After installing the HTC Toupad on my Kaiser, I have experienced big problems. Letters on the Keyboard (QWASYX) didn't work and even the onscreen keyboard didn't recognized these letters. So I decided to uninstall the application. But now I have other problems with my Kaiser and so I decided to Hardreset my device. But before I do this, I want to upgrade my Kaiser to WM6.1 and update it to the newest ROM/Radio.
Now I have some questions relating to that.
As a result that I am a Super Moderator in another forum I know that it is bugging if people don't read the Wiki/FAQs. I have read them, but I don't understand many things :-|
I have handled it to unlock my device, but when I was reading about updating to WM6.1, I saw only things like: "... works only with 6.1", update this, update that, and I don't know in which order.
First of all: Could anyone explain me how to update my Kaiser to WM6.1 and the newest Radio?
Secondly: What is this Duty FW? Is it a modified Rom with added apps?
Finally: I have a normal Kaiser. Not a Vario III, AT&T or something like that. Just the austrian version of the Kaiser with no brandings and so it would be good to have a Firmware without any brandings.
Thx in advance.
BTW:
ROM version: 1.56.405.5
Radio version: 1.27.12.11
Oh, I have forgotten one thing: Is it possible to change the LED blinking in the Phone Mode? To change it from green to blue?
The letter problem you were having was a simple fix with a cab that can be found all across this forum. All the ROM's can be found in the ROM Development forum and as far as what has been changed, modified, added, programs list, can all be found in the FIRST or SECOND post of each of the ROM's. So you will just have to read through them and find one that suits you best as they all have something different. Most of the radio's that can only be used on 6.1 ROM's will say "Will only work on 6.1 ROM's". And I would like to add even though you don't have at&t DON'T FLASH THE 1.65.17.10 RADIO.
KDKobes said:
The letter problem you were having was a simple fix with a cab that can be found all across this forum. All the ROM's can be found in the ROM Development forum and as far as what has been changed, modified, added, programs list, can all be found in the FIRST or SECOND post of each of the ROM's. So you will just have to read through them and find one that suits you best as they all have something different. Most of the radio's that can only be used on 6.1 ROM's will say "Will only work on 6.1 ROM's". And I would like to add even though you don't have at&t DON'T FLASH THE 1.65.17.10 RADIO.
Click to expand...
Click to collapse
Ok, thx first of all. Dutys rom sounds nice. What do I have to do first? It is still a little mystery for me ^^
alcbottle said:
Ok, thx first of all. Dutys rom sounds nice. What do I have to do first? It is still a little mystery for me ^^
Click to expand...
Click to collapse
You need to make sure before you flash a rom on to your kaiser that you flash hardspl - http://forum.xda-developers.com/showthread.php?t=334679, and than after successfully installing that you can flash the rom of your choice. Please read the first sticky thread under the kiaser rom development form - http://forum.xda-developers.com/showthread.php?t=369282; it has all the info you need pretaining to everything involved when it comes to flashing your kaiser. I strongly recommend you go through it and read the posts it points to that are relevant to flashing.
Once you have done that it is pretty simple process; just do yourself the huge favor and don't flash until you have flashed hardspl or you will brick your phone.
If its still a mystery I would start here http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
No pun intended.
@thesire
I have already installed HardSPL. Otherwise I couldn't have unlocked my device with this method: http://forum.xda-developers.com/showthread.php?t=361039
I have used just the Sim Unlocker Method. Not the Kaiser SIM/CID Unlocker & Changer
That's the reason, why my mobile phone is now with an english language
Just one important question: Do I have to change my current radio for the new Duty Release?
@KDKobes
Why shouldn't I flash THE 1.65.17.10 RADIO?
Some ROM's come with radio's some don't. Most of Dutty's ROM's come with radio's, but if you want to keep your radio then I would suggest finding a ROM without a radio in it or making sure yours is compatible with the WM 6.1 and reflash it back. The 1.65.17.10 radio will lock your phone to that radio only and you will not be able to change it until somebody can fix it. Alot of people are stuck with that radio now and can't change.
Hi im from mexico(my english sucks) and i have an atyt tilt i unlocked to can use in my country but since i unlocked the camera doesnt works ,when i open the camera app i can see all the menu and options but is just black i mean you cant take pictures because all is black anyone know what can be?
The info of the bootloader or whatever is.
Security Unlocked
KAISI*0 MFG
SPL-1.0.OliPof
CPLD-8
And system info.
Rom version. 3.57.502.2WWE
Radio version. 1.70.OliNex
Protocol version. 25.65.30.04H
Is there any chance that the camera and other functions works even if the tilt is unlocked
PD. I unlocked the tilt with the KaiserUnlocker.exe
Thanks
tryambaka said:
Hi im from mexico(my english sucks) and i have an atyt tilt i unlocked to can use in my country but since i unlocked the camera doesnt works ,when i open the camera app i can see all the menu and options but is just black i mean you cant take pictures because all is black anyone know what can be?
The info of the bootloader or whatever is.
Security Unlocked
KAISI*0 MFG
SPL-1.0.OliPof
CPLD-8
And system info.
Rom version. 3.57.502.2WWE
Radio version. 1.70.OliNex
Protocol version. 25.65.30.04H
Is there any chance that the camera and other functions works even if the tilt is unlocked
PD. I unlocked the tilt with the KaiserUnlocker.exe
Thanks
Click to expand...
Click to collapse
Its your radio! Go here and flash another radio! http://forum.xda-developers.com/showthread.php?t=393182 If you have anymore questions let us know!
Wrong components wont fit together correctly
Cal-El said:
Its your radio! Go here and flash another radio! http://forum.xda-developers.com/showthread.php?t=393182 If you have anymore questions let us know!
Click to expand...
Click to collapse
Not only the radio (although I've not seen that version before) but more importantly the version of hardSPL used is for WinMo 6.0 and NOT WinMo 6.1 ROMs. A ROM that starts with 3. something is a WM 6.1 ROM. Altogether a real hotchpotch mixture. The OP needs to carefully check to make sure all the ingredients match up if the recipe is to succeed! Just realised it's the OPs first post so he or she may want to read the wiki (the link near the top of the page) about all of this stuff to get the gist before taking any further steps.
Flying Kiwi said:
Not only the radio (although I've not seen that version before) but more importantly the version of hardSPL used is for WinMo 6.0 and NOT WinMo 6.1 ROMs. A ROM that starts with 3. something is a WM 6.1 ROM. Altogether a real hotchpotch mixture. The OP needs to carefully check to make sure all the ingredients match up if the recipe is to succeed! Just realised it's the OPs first post so he or she may want to read the wiki (the link near the top of the page) about all of this stuff to get the gist before taking any further steps.
Click to expand...
Click to collapse
Well now im confused my titl have windows mobile 6.1 and i unloked with the kaiserunlocker and i thinkk ive read thatit can be used on 6.1 sooo anyway how i can get the phone unlocked and all functional??? i need to change the rom or radio or what i need to do ?? thanx
tryambaka said:
how i can get the phone unlocked and all functional??? i need to change the rom or radio or what i need to do ?? thanx
Click to expand...
Click to collapse
Please read all of the wiki for the Kaiser and all the information about which ROMs and Radios go together (links in the Kaiser wiki). Also read up about SPLs and then get back with which specific questions you have that aren't already covered. No one is going to hold the hand of newcommers who haven't fully researched things first. A hint is that the hardSPL versions starting with 3.something are for WM 6.1 ROMs whereas hardSPL versions starting with 1.something are for WM 6.0.
Hi Flying Kiwi
I guess we are or were all noobs at one point and everyone should read and research problems before asking questions. However sometime even when you research and dig through the vast volumes of info you still need a little help. All this info can be a little intimidating especially when you are new to the process. then to get an answer that (No one is going to hold the hand of new commers who haven't fully researched things first.) Well that could even make that person a little more intimidated the next time he/she has a question.
I have been lurking arouind here for a while reading and digging for info on different roms, radios, themes. I have flashed a few roms now and still have questions but am not sure I should ask them because some where in this massive web site there might be a wiki I might have missed, and I too will become one of those noobs who get chastised by a senior member for not doing enough research.
I also have a Tilt and have flashed pda ultimate Full v15 Rom date 01/01/08 radio that is recomended by the rom 1.65.24.36. Protocol 25.94.40.06H.
I used HardSPL 3.29 with windows 6.1 I have even downloaded a few fixes for my camera that have not worked, still a black screen. But I am still trying to get it to work. other roms I have tried Duttys and hyperdragon the camera worked, but quit after a while with hyperdragon. More than likely something I did or installed to make it stop showing up on the screen. We are all unsure at some point.
Not looking for someone to hold my hand just looking for help without the frustration of someone who has been doing this for a while and thinks everyone should be as good as they are at thinking through a problem.
Not trying to step on your toes and hope you don't take this the wrong way, I have seen others with the same frustration in their answer.
Regards,
Tim
i saw a few post for the 1.56, and i visited the official site and found that there was really a 1.56 hardware upgrade.
did anyone install it and feel it?
can tell the difference?
as the title~~ some screen shot will be great
have a nice one
No difference)))just numbers)))
WiFi conectivity improveents?
For those of us that have intermittent WiFi connectivity issues; has anyone noticed any improvements connecting to hotspots after installing the new ROM?
onkolog said:
No difference)))just numbers)))
Click to expand...
Click to collapse
Really? so why the upgrading to 1.56?
Posted earlier.
ROM Different
kwbr said:
Posted earlier.
Click to expand...
Click to collapse
Thank You, kwbr. You can prove for the others to know what...
Regards,
KCJ
KChauJen said:
Thank You, kwbr. You can prove for the others to know what...
Regards,
KCJ
Click to expand...
Click to collapse
Not my credits, it was posted earlier by another user. But it's not all about the numbers. Drivers, xip, os as well as packages changed.
I told you)))just different numbers))))
onkolog said:
I told you)))just different numbers))))
Click to expand...
Click to collapse
Well, take a look at nk.exe and the other parts in the xip. Run a diff with an hexeditor. Change in offsets. Also the os changed. Run a diff on 1.19 and 1.56. Also the drivers changed. So I guess it's not only the numbers. But show me if I am wrong
OK)))XIP,SYS and OEM all cookers always change it doesn't matter which version is it)))
Only few different drivers...You cannot use it without new SPL or you have to flash through USPL...But again)))numbers)))(size is a numbers,versions are numbers too))))
im still arguing if i should flash to new ROM 1.56. onkolog said no diff. just number changed. and i read the rom_diff, it showed many new version in ROM. so im gonna test the new ROM 1.56 (miri's v7.2 standard without manila) and will report the feel IMO. i hope this new ROM is better
Why)))you not understand one thing)))All cookers change OEM,SYS and XIP to newest always)))In ROM 1.56 old OEM,SYS and XIP...They don't use it...That why no difference between these ROMs...
Miri use OEM,SYS and XIP from Topaz and Rhodium and me too...and where is new ROM 1.56)))it's gone)))
Or if you change few files to newest it means you have new ROM?)))I don't think so...
The original poster was comparing stock roms
onkolog said:
Why)))you not understand one thing)))All cookers change OEM,SYS and XIP to newest always)))In ROM 1.56 old OEM,SYS and XIP...They don't use it...That why no difference between these ROMs...
Miri use OEM,SYS and XIP from Topaz and Rhodium and me too...and where is new ROM 1.56)))it's gone)))
Or if you change few files to newest it means you have new ROM?)))I don't think so...
Click to expand...
Click to collapse
Sorry I don't understand. I use the xip's OEMXIPKernel part from 1.56, some new drivers and packages from the 1.56 rom. Indeed not sure if hTC fixed some issues in these components but we will find out. Enlighten me
That what I told...You and other cookers just use few new things from new ROM 1.56, but users think you use all ROM 1.56...They don't understand you correctly...That why I told no difference...only numbers)))
GPS
GPS is indeed faster to find a fix, but something odd I have noticed is that TomTom 7 doesn't say I am connected to any satellites, yet it has found my location and works perfectly fine otherwise...
Opera (Internet Browser)
With the old ROM, opera would always be slow to load up and after quitting the application the phone would screw up somehow, either it becomming sluggish or crashing or getting a 'dont send' error. In this new ROM, it is much faster to load up and quit, however, it is still kind of buggy for me and sometimes crashes. Its still not stable (in my opinion).
Battery Life
Regarding battery life, I haven't seen much of a difference. If anything I would have to say this ROM has got a bit better battery life but nothing much, its negliable.
In General
The new ROM in general is slightly faster, but only by a small amount. Some people wouldn't probably even notice this speed difference because it is so small.
Worth Upgrading?
Depends. If you use GPS a lot then this could be for you. But soon people will probably start cooking with this as the base ROM so you will get these features and more anyway. Also it can be risky upgrading to this ROM, with it being HardSPL incompatible and having its own SPL embedded. If you have the time and patience, then theres no reason why not to upgrade.
prank1 said:
GPS
GPS is indeed faster to find a fix, but something odd I have noticed is that TomTom 7 doesn't say I am connected to any satellites, yet it has found my location and works perfectly fine otherwise...
Opera (Internet Browser)
With the old ROM, opera would always be slow to load up and after quitting the application the phone would screw up somehow, either it becomming sluggish or crashing or getting a 'dont send' error. In this new ROM, it is much faster to load up and quit, however, it is still kind of buggy for me and sometimes crashes. Its still not stable (in my opinion).
Battery Life
Regarding battery life, I haven't seen much of a difference. If anything I would have to say this ROM has got a bit better battery life but nothing much, its negliable.
In General
The new ROM in general is slightly faster, but only by a small amount. Some people wouldn't probably even notice this speed difference because it is so small.
Worth Upgrading?
Depends. If you use GPS a lot then this could be for you. But soon people will probably start cooking with this as the base ROM so you will get these features and more anyway. Also it can be risky upgrading to this ROM, with it being HardSPL incompatible and having its own SPL embedded. If you have the time and patience, then theres no reason why not to upgrade.
Click to expand...
Click to collapse
Cool, thanks for telling that.
for my experience, TTom works well in my 1.19, so.....
i think i should let my device stay the same way she did
just numbers... well your right evan data is just numbers 1010111001001 but they can they can make a differance. 1.56 has updated os ect which a good **** can easaly better but theees also the updated spl with some firmware w for the new drivers ect now the divers and spl arnt gona b bettered by a cook only incorpirated only a proramer, developer, someone who knows the languages ect could mess with thouse. im hoping olinex will hack the new spl for us soon which whould make it esy to flash 1.56 coocked roms.
as i said new drivers and firmware which includes new drivers and firmware for the graphics. im hoping htc have given us heardware acceleration but time will tell. a better base to start from will always give you a better reault and sone of the guys here work wonders so lets hope and see what happens.