Related
So, guys, here is the first test SSPL for breeze. I have no breeze, so please report if it works.
extract to your device root!!!
start spl.lnk AND immediately press POWER and CAMERA buttons. (or try hust CAMERA)
if the screen shows sth like spl 1.01 DFR, then everything is ok - it is my spl
this version was intended to allow you to flash any CID rom update and unsigned nbh files. the next release will be based on the latest spl and include compatibility with new RUU of 1.34 rom updates and the feature to fix bad blocks.
EDIT - may 10, 2007 - SSPL V1 works successfully
CID check - disabled
NBH check - disabled
attached spl in nbh format for flashing - breeimg.zip
Thanks to:
DES for his SSPL
Olipro for his hard spl which actually saved me from hours of IDA analysing - I simply compared his spl to original and patched the one from breeze
at first try...
i have exactly what i descriped here:
http://forum.xda-developers.com/showpost.php?p=1253965&postcount=782
after the reboot i can't get into the bootloader...
what did you changed in the spl ?! or in the sspl.exe ??
I try... It's WORK!!!!!
what did you do??
edit:
ok, strange things goes on here ... just tryied it another time yet...
ipl-sspl by Des
SPL-1.01
should work
if i have time today i will try to made an cooked rom ...
if this works i look for a way to extract the files out of the excalibur wm6 rom ...
edit2:
i now have the problem that i can't connect mtty to bootloader... mtty ends with error when producing the cmd command line... i just had this problem with hermes to... i have 2 mtty version on all the 2 the same error...
i will try it now on a other machine..
1) Rename the BREEZE_HTCEUR_1.34.251.1_SHIP.nbh file to BREEIMG.nbh
2) Copy to sd card
3) start spl.lnk and immediately press POWER and CAMERA buttons
4) Phohe start in bootloader and flash new rom. (but no new radio)
THX
Thx for the replies, i`ll try to make a newer sspl. also, let`s begin the work for wm6 for breeze based on hermes rom... but in another thread some time later
can anyone confirm that they have sucessfully flashed a cooked ROM onto a breeze? Please update the wiki.
doedoe said:
can anyone confirm that they have sucessfully flashed a cooked ROM onto a breeze? Please update the wiki.
Click to expand...
Click to collapse
Hi, i work on it!!
on afternoon/evening i will try to cook a rom with a few freeware tools bases on the actuell rom!!
i can begin working on wm6 rom recently when extract the excalibur content... because of the problem that breeze is a smartphone an hermes a ppc there would be some problems with coredll's of the system! because of that i need smartphone wm6 rom... befor that there is no wm6 on breeze possible!
....
can anyone else can try mtty with the sspl ?
-----
engel98 said:
1) Rename the BREEZE_HTCEUR_1.34.251.1_SHIP.nbh file to BREEIMG.nbh
2) Copy to sd card
3) start spl.lnk and immediately press POWER and CAMERA buttons
4) Phohe start in bootloader and flash new rom. (but no new radio)
Click to expand...
Click to collapse
this should work when you have a new spl installed - and you want to flash another cid rom!!
has nothing to do with unsigned code!!
!!! only for understanding!!
hey what should i say...
it just look like that it works...
i have cooked a rom now...
only small reg changes!!
i have flashed it with hermes RUUUpdaterV2
only a OS file!
Phone boots! now i have to check if the changes are taken over!!
But why not ;Þ
Please post to the wiki.
I am hoping that we can use tornado WM6 code to cook a WM6 image...
I just added some Infos to wiki!!
Updated:
Breeze/MTeoR Upgrading Guide (4Hard/S-SPL)
Custom RUU Updater
I can also confirm that this SSPL truly works, but I am still unable to flash 1.38 radio over 1.29 currently installed with this SSPL version.
Any hints when could we expect SSPL based on some newer SPL release (like 1.09 or 1.10)?
just extract the radio rom what you want from an shipped rom ...
take it and re nbh's it with the nbgehn utility ... than put it in the custom ruu folder start ruuwrapper and flash it...
futureshock said:
just extract the radio rom what you want from an shipped rom ...
take it and re nbh's it with the nbgehn utility ... than put it in the custom ruu folder start ruuwrapper and flash it...
Click to expand...
Click to collapse
Tried that 3 times already. Doesn't work! Although process finishes whithout any glitches, System Info still says Radio ROM 1.29.00, and my phone still acts like crap...
.... i tried it too ... no problem... you should have done a mistake...
download an usb sniffer and let it run when updating... maybe then we can see the error...
but i had done it too... with sspl had no problems!!
I confirm this is also work on my dopod 595.
Now I need to search how to change the splash screen
what would you want to change??
futureshock said:
.... i tried it too ... no problem... you should have done a mistake...
download an usb sniffer and let it run when updating... maybe then we can see the error...
but i had done it too... with sspl had no problems!!
Click to expand...
Click to collapse
This is what I did/have...
- I have installed Radio ROM 1.29.00.10 (with older 1.32.251.1 RUU)
- My MTeoR is CIDed QTEK_A07 - all available RUUs fail with INVALID VENDOR ID error
- If I use SSPL (linked in this thread), my MTeoR actually does start SuperCIDed and I can run any RUU or custom ROM, and although all of them complete with success Radio ROM DOES NOT CHANGE at all.
My theory is (based on posts in Hermes upgrading forum) that Radio ROM 1.29 installed Radio BL 0108 which in turn does not allow flashing Radio ROM when started SPL is pre-1.09 codebase. I presume that it flashes with 1.09, 1.10 or newer only (makes sense because HTC released new 1.34 RUU which first installs SPL 1.09, then the rest of ROM).
Can anyone concur with my assessment or am I completely wrong?
Ohhh,thank.It works perfectly on my HTC MTEOR from O2 Czech Republic.
sp3dev said:
So, guys, here is the first test SSPL for breeze. I have no breeze, so please report if it works.
SSPL V1 works successfully
CID check - disabled
NBH check - disabled
Click to expand...
Click to collapse
WOW
I have now read for weeks the Hermes/Trinity threads wondering if this would be possible for "simple" smartphones too - and you did it
So while it is possible for the MTeor, maybe your kind of patching the SPL would also work for the Excalibur/S620?
I would love to flash my O2 Cosmo, but want to have an original ROM Backup for warranty/fallback reasons.
I also found out that it is possible to extract and cook ROMs for it like the way for the Hermes - but I cannot flash because of this f****g need for signed .nbh.
May be you are able to do this MAGIC on a Excalibur SPL too?
I would try out on my phone if you want to take the challange - if it doesn't work I think I'll have to get a MTeor
Anyway - lots of thanks for your work - and giving me back my hope on smartphone ROMcooking
I case of people who don´t read 200 post and still brick their device - here is the guide that worked for ALL people with:
HTC P4350
XDA Terra
WING
with IPL 4.xxx and higher!!! (that is IMPORTANT)
and then follow this:
Default
For me it was working when:
1. install canonyang.cab
2. install aserpolicy.cab
3- install disablesecurity.cab
4. SOFTRESET
5. run RUU from Hard-SPLWM6 folder verison 4.70.yang
6. screen will become white - WAIT until it reboots itselfe.
7. done!
check if SPL now is 4.70.yang
Fore sure: I used this
http://rapidshare.de/files/38148213/HardSpl_WM6.rar.html
mirror: http://www.sendspace.com/file/ot8zsn
It worked for many others, too.
b.mann said:
I've figured my issue out, maybe I can help the others that get the 202 Connection error.
On your device--BEFORE Hard-SPL--go to Settings->Connections->USB to PC and check that checkbox.
If it's not checked, most times you will get the 202 Connection error. Hard-SPL and you should be good to go!!
Click to expand...
Click to collapse
You may add Dopod C800 to the list
It's the real deal
Succesfully flashed my device under papamopps supervision and can verify that this HardSPL package is working 100%
Thanks again papamopps
heya, seems like i'll get my terra flashed then too. Nice one. Well, at least to some point...i almost fear to ask...how do i see if i have "IPL 4.xxx and higher"?
I've got Rom-version 4.11.207.1 GER, Protokoll-Version 4.1.13.39
TIA for help
*BTW, the rapidshare-link tells me "file not found".
stahlsau said:
heya, seems like i'll get my terra flashed then too. Nice one. Well, at least to some point...i almost fear to ask...how do i see if i have "IPL 4.xxx and higher"?
I've got Rom-version 4.11.207.1 GER, Protokoll-Version 4.1.13.39
TIA for help
*BTW, the rapidshare-link tells me "file not found".
Click to expand...
Click to collapse
Softreset your Herald and press the Camara butten until you see an Colerd screen it´s the Bootloader. there you will find the IPL and SPL on the screen. softreset your herald without pressing any butten and it will start normely to youre WM. You wont delete any data aslong you nothing Flash.
Ghostrider
stahlsau said:
heya, seems like i'll get my terra flashed then too. Nice one. Well, at least to some point...i almost fear to ask...how do i see if i have "IPL 4.xxx and higher"?
I've got Rom-version 4.11.207.1 GER, Protokoll-Version 4.1.13.39
TIA for help
*BTW, the rapidshare-link tells me "file not found".
Click to expand...
Click to collapse
link updated!
Thanks!!
yew i am hardspl but it change my boot screen oooo i have to reflash nvm
aron4588 said:
yew i am hardspl but it change my boot screen oooo i have to reflash nvm
Click to expand...
Click to collapse
could you shareyour device information-so that we can see for which device it is working?!
It worked on my:
HTC p4350
It had: WM6 overclocked to 299Mhz (but i let it on Default 201Mhz When I was in de process)
It had de 4mb Page Pool.
Worked great!!! THanks man!
BTW- afteryou have Hard-SPL.
Never use an official RUU with included SPL.nbh (delete this ebfore flashing)
And never use the RUU from Hard-SPL
Allways use the included RUU or take an RUU without SPL.bnh when you onlycan download the ruu_wigned.nbh.
Regards
how to go back to stock?
i currently have hard spl with touchit 4.4
i want to go back to factory spl and factory ruu
can someone please help me?
thank you
i did it with t-mobile wing usa
aron4588 said:
i did it with t-mobile wing usa
Click to expand...
Click to collapse
I also was able to Hard-SPL my T-Mobile wing successfully in the US
and....
in the past ive always went stock b 4 flashing a new rom
what are the steps now to change to new roms? wheather it b hard spl or factory spl
thanks
I am waiting from 20 minutes with my phone in white screen mode... is it normal?
EDIT: ehm... please... im am quite worried. (30 minutes in white screen :S)
johnny88 said:
I am waiting from 20 minutes with my phone in white screen mode... is it normal?
Click to expand...
Click to collapse
it should end after 10 or 15 minutes.
hope you installed all files before and softreset.....
yes all cabs...
during the install of hardspl the ruu install wizard shows a windows with "connection failure" and only an Exit button. I click on it while it is in white mode... I am still waiting...
What should I do? (wainting or reset?)
finally (after 40 minutes of white screen) I softreset with stylus...
It reboots normally as nothing was appened... better then brick.
I will try again later.
THX!
hi
when HTC P4350 is into bootloader mode, SPL and IPL are 1.08.0001
is it an older SPL or waht?
if yes can i update my P4350 to WM6 without using Hard-SPLWM6 ??
any idea?
anyone have a link to learn what's is exactly hard SPL, and the difference between HARD SPL and SOFT SPL
thx in advance
br
BouRRi_GSM said:
hi
when HTC P4350 is into bootloader mode, SPL and IPL are 1.08.0001
is it an older SPL or waht?
if yes can i update my P4350 to WM6 without using Hard-SPLWM6 ??
any idea?
anyone have a link to learn what's is exactly hard SPL, and the difference between HARD SPL and SOFT SPL
thx in advance
br
Click to expand...
Click to collapse
allways start with :
http://forum.xda-developers.com/showthread.php?t=327046
and then try one of this:
http://forum.xda-developers.com/showthread.php?t=358030
first the official one....
and read- read - read
Hi, i've bough a p3600 on ebay.
The seller tell me the phone is out because he flash a bad radio version on the phone.
I try to upgrade some file. ( Rom OS, Radio, SPL,etc ...)
I try the splexploit...
BUT ... The phone already stay on startup. i can see HTC startup screen,the windows startup screen ...but never the today screen.
I try hard reset, htc official rom, cookeed rom,...but when i flash a rom with "gsm", the update freeze at 13%
I try with usb and with sdcard..same thing, already stay at 13% !
But if i flash hard spl, 100%, if i flash OS, 100%, just the radio freeze at 13%
Any idea please ?
update
after the boot, i've got a "no gsm" message near the radio version
other people got the same problem like me ...
God oli, help me please
I more or less had the same thing and solved it with the sc card flash page.
http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing
A rom that works for me to flash it back to the working original
http://www.allaboutphones.nl/forum/request-originele-spv-m700-rom-p3600-rom-t727.html
To download you have to register with them.
GL
Hi, updating the radio to 1.56 crashed, now I have the No gsm message and doesn't boot, running mtty from bootloader with info2 command it says supercid but I can't update any official rom SPA, WWE, ITA... the error is "vender id invalid". I've tried the sd method but returns to bootloader .
Any help will be appreciated.
You should try SSPL : http://forum.xda-developers.com/showthread.php?t=293632
And if it doesn't work the Des' Crash-Proof SPL :
http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66
and try to flash a radio rom again !
doesn't work
try again and again ...the phone block at 13% ( when the radio upgrade begin) ...
pfffff
I've the same problem and after several attempts without result I sent the phone to the workshop and they told me the problem is with the main board! (this cost almost the price of phone itself). Moreover, I've seen some where here that the problem could be caused by radio chip but I couldnt get the detail.
If you find a solution give me a tip.
i've test lot of thing.
I progress with mtty. but i've got a problem ..i can't downgrade the phone under SPL 1.05.
SPL 1.04 can "reset" the radio, or enter directly to the radio bootloader. With that, i can save my phone.
Try mmty (see the wiki => bootloader info) and with the mfg spl, you can try the method.
Guys,
I've got the same problem...
I've sim and cid unlocked my spv m700 some time ago, using wonderful software from pof. Everything went smooth.
Today I've decided to update radio rom to 1.38.00.11 to enable gps.
I've launched RUU, everything was ok till 44%, when I've got message "Communication error".
After that program tried to recover rom without success, I've got another message "Image corrupted"...
I've tried to reboot my spv (both SR and HR), after rebooting I see:
M 05
B 05 D 1.23
then those symbols disappear and I see only Orange logo.
That's it... The end...
Should I reload radio rom or both rom and radio rom to my DEAD spv? If yes - how?
Please help as I'm very disappointed, frustrated and so on!
Thank you!
Update: A-A-A!!! I did it! I revived my spv! Let me explain how (I'm kinda new to all this rom and and ssl things, so forgive me for mistakes, if there are any):
1 I ran unbrick software. Yesterday it did not work (said, that could not find smth), but today it worked fine.
2 I ran RUU and BINGO! That's it!
BTW, I have vista, but it still worked (I think, thanks to Windows Mobile Device Center, which I have installed).
Also, I killed wmd process in Task manager in the beginning (have read this recommendation somewhere).
Thanks to everybody for their help!
nyco,
could you please explain briefly what you did exactly and which radio and rom you used
thanks and regards
Flash HSPL, then issue task 2A command from mtty. Flash full ROM.
Thanks stepw...
when I hit task 2A nothing happens.
Original ROM doesnt respond. I flash with cooked ones. Result 100% successful. I restart the phone- hang at boot screen.
stepw said:
Flash HSPL, then issue task 2A command from mtty. Flash full ROM.
Click to expand...
Click to collapse
Hi,
I'm already under the hard SPL. and "task 2A" not working.
Macars, try only with radio ripped or full original rom (from htc or cooked with radio) because some cooked rom have only OS.
Can you tell me what SPL you have?
Hard SPL?
Have you try splxploit ?
Can you tell me what rom you try oviplokos1 ?
thanks,
it shows SPL 9.99 and with this I cannot flash anything so what I do is to update with splxploit and then the phone changes to SPL 1.2 olipro. With 1.2 I can only flash coocked ROM and will go until the end 100% successful- (original ROM the phone does not respond), but when restarts with newly loaded cooked ROM the phone hangs at window login screen and when put it in bootloader the SPL 9.99 returns again.... the story goes on like this.
I'm becoming mad....
hi,
you can only flash cooked rom because the rom you flash contains only OS. When you flash HTC rom, the rom contains os+radio+spl+....other thing ...
Try this method to downgrade your SPL (9.99) to oli 3.20 :
1°) run splxploit
2°)when the phone reboot on the spl 1.20 oli, run HardSPL 3.20 olipro. (search on the wiki or the trinity forum
3°)upgrade to 3.20 oli ...
Now, when you go to the bootloader, you can see SPL 3.20 oli.
Try reflashing a radio only (see the upgrading topic, you will see radio 1.56.xxxx)
Tell me if this method work.
When i'm on spl 3.20 oli, i can load radio rom to 0%
when I downgrade my phone to spl 1.05, and i can run the upgrading to 7% (best score )
To downgrade to SPL 1.05:
edit the "unbrick.bat" on the splxploit folder.
Replace TRIN_HardSPL.nb to TRIN_SPL105.nb
try to find SPL 1.04. I'm sure if i got the spl 1.04 i can revive the phone
Did exactly as you said final result:
When i'm on spl 3.20 oli, i can load radio rom to 0% (and stays there )
hi,
ok, try to load spl 1.05 with splxploit, and when it is load, run radio upgrade (1.56.xxxx)
Try to find spl 1.04 and mtty it can be reset the radio bootloader
if you find 1.04, give me it
hi nyco,
I tried with SPL 1.05 the result is the same as your reaches 7% and restarts. I'm still trying to find SPL 1.04 I found one for Hermes I tried but didnt work failed.
macars said:
hi nyco,
I tried with SPL 1.05 the result is the same as your reaches 7% and restarts. I'm still trying to find SPL 1.04 I found one for Hermes I tried but didnt work failed.
Click to expand...
Click to collapse
arf :/
You got exactly the same problem i have.
did you check if you have bad block (with mtty)
try format the phone with mtty.
i contact pof, but he doesn't answer me
I bought a new device and when I tried to upgrade it with an unofficial ROM I couldn't do the step of upgrading SPL and the indicator stayed stop at 0%
My Device boot loader shows :
DIAM100 64M
SPL-1.93.0000
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
I have tried all Hard-SPL Standard and Developers versions but I got the same result stopping at 0% including the RUU_Signed.nbh which is designed especially diamond came with 1.93 SPL originally
Please help me
fofo1881 said:
I bought a new device and when I tried to upgrade it with an unofficial ROM I couldn't do the step of upgrading SPL and the indicator stayed stop at 0%
My Device boot loader shows :
DIAM100 64M
SPL-1.93.0000
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
I have tried all Hard-SPL Standard and Developers versions but I got the same result stopping at 0% including the RUU_Signed.nbh which is designed especially diamond came with 1.93 SPL originally
Please help me
Click to expand...
Click to collapse
You have Hardspl installed already. You don't need to overwrite it again.
Kevbodian said:
You have Hardspl installed already. You don't need to overwrite it again.
Click to expand...
Click to collapse
But also when I try to upgrade directly with any cooked ROM I face the same problem
the upgrade stops on 0%
Plz help me if u have any idea
THX
What you show is the shipped SPL - so you will only be able to use offfical (if branded) operator customised ROMs.
more info to follow... (just on the phone)
There is a sticky thread about this problem
http://forum.xda-developers.com/showthread.php?t=409425
Just a tip..read that and your problem is gone
fofo1881 said:
I bought a new device and when I tried to upgrade it with an unofficial ROM I couldn't do the step of upgrading SPL and the indicator stayed stop at 0%
My Device boot loader shows :
DIAM100 64M
SPL-1.93.0000
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
I have tried all Hard-SPL Standard and Developers versions but I got the same result stopping at 0% including the RUU_Signed.nbh which is designed especially diamond came with 1.93 SPL originally
Please help me
Click to expand...
Click to collapse
If your phone shows this info after you flash hard-spl in your device, you dont have hard-spl in your device at all, so flash that first
you should seen 1.93Olinex forexample if u have flashed the 1,93unsigned hard-spl
R3PUBL1K said:
What you show is the shipped SPL - so you will only be able to use offfical (if branded) operator customised ROMs.
more info to follow... (just on the phone)
Click to expand...
Click to collapse
My device is not branded....
Do u mean that it will never accept upgrading to coocked ROMs ?
DO u think that there is no method yet ? or we will find new methods in the future ?
alas
fofo1881 said:
My device is not branded....
Do u mean that it will never accept upgrading to coocked ROMs ?
DO u think that there is no method yet ? or we will find new methods in the future ?
alas
Click to expand...
Click to collapse
No I am not saying that - If you dont have either OliNex or Jockeys HARDSPL then you could only use offical ROMs....etc etc...
So you really need to sort this issue out then you will be free to load any cooked ROM depending on your region
Remember that OliNex's SPLs have protection in them so that you can only update while you machine is connected via activesync.
When you try and Run the olinex SPL then you should get a popup on you devices screen asking you to confirm you want to run this application. Do you get this far?
Have you tried Jockys?
R3PUBL1K said:
When you try and Run the olinex SPL then you should get a popup on you devices screen asking you to confirm you want to run this application. Do you get this far?
Click to expand...
Click to collapse
I've done that but it was useless and I've got the same problem 0%
R3PUBL1K said:
Have you tried Jockys?
Click to expand...
Click to collapse
I have not heared about it also i couldn't find it in the forum
would u lead me please ?
fofo1881 said:
I've done that but it was useless and I've got the same problem 0%
I have not heared about it also i couldn't find it in the forum
would u lead me please ?
Click to expand...
Click to collapse
Try here JOCKY
omar 1958 said:
Before flashing Olinex Hardspl you need to do three things:
1. Download Net framework Compact from herehttp://www.microsoft.com/downloads/details.aspx?FamilyID=e3821449-3c6b-42f1-9fd9-0041345b3385&displaylang=en Connect device to pc and wait for Active Sync to finish. Now run the download and follow instructions, make sure to install to device and NOT to storage. Reboot your phone.
2. Download and install Cert_SPCS. (Attached).
3. Download and Install EnableRapi. (Attached). On installation of this, your phone might come with the comment that this file is already on the phone and installing this file will remove the old one, accept the new installation and reboot.
Having done the above, you are now ready to flash HardSPL. For further help read this http://forum.xda-developers.com/showthread.php?t=476738
Good Luck this time round.
Click to expand...
Click to collapse
Never had to this before - but I've never had any issues flashing Hard SPL to devices - over 50 different handsets
Hey, I gotta apologize for my above post. I read the 1.93.000 as 1.93.Olinex.
R3PUBL1K said:
Remember that OliNex's SPLs have protection in them so that you can only update while you machine is connected via activesync.
Click to expand...
Click to collapse
What do you meen? I have olinex1.93 and never use Active sync to flash a rom (or start AC), I put my phone in bootloader manualy and flash. Or is Ac startup even is this situation?
omaga said:
What do you meen? I have olinex1.93 and never use Active sync to flash a rom (or start AC), I put my phone in bootloader manualy and flash. Or is Ac startup even is this situation?
Click to expand...
Click to collapse
I was trying to explain that don't try flash (another) SPL using HardSPL as olinex one has overwrite protection.
Flashing ROMs this way is no problem - but not recommended
Upgrading is not possible
R3PUBL1K said:
I was trying to explain that don't try flash (another) SPL using HardSPL as olinex one has overwrite protection.
Flashing ROMs this way is no problem - but not recommended
Click to expand...
Click to collapse
I found that this new version of devices is HardCoded with original HTC-SPL
So its seems that upgrading to unofficial ROMs is not possible yet ...
thank u all for your concern
R3PUBL1K said:
I was trying to explain that don't try flash (another) SPL using HardSPL as olinex one has overwrite protection.
Flashing ROMs this way is no problem - but not recommended
Click to expand...
Click to collapse
I have Olinex 1.30 and have previously upgraded from ROM 1.34 to 1.93. However, I have tried upgrading the ROM to 2.03.831 but it doesn't work.
Do I need to upgrade the Hard SPL to 1.93 signed? Where can i get the file?
Thanks.
Hello,
try the "RUU_Signed_1_93OliNex_HSPL_UnsignedEdition.zip" from THIS thread as this was the only one that worked for me. I recently flashed a O2 branded Diamond and was also about to give up...it was my last try/chance and eventually I succseeded in flashing any Diamond ROM until 100%.
...bye DonQ
does it means I have to overwrite my HardSPL 1.30 signed?
Got a new Diamond and same issue, can not hardSPL1.93 Olinex over this new original SPL 1.93.000
Hey I succeeded to work this out!!
Here's what I did:
Download this file: Unsigned-Hard-SPL-Diamond-OliNex.zip
and this: RUU_Signed_1_93OliNex_HSPL_UnsignedEdition.zip (you can choose another developer version such as HardSPL_Olinex137_Unsigned.zip)
Now copy the file RUU_Signed.nbh of seconde archive to replace the one in the first archive. Then run the ROMUpdateUtility.exe of the 1st archive. As the moment the percentage bar appears, run the SSPL-Manual.exe of the 1st archive from your PDA (of course, this file must be copied to PDA before via ActiveSync).
Just run again ROMUpdateUtility.exe if you have a phone not responding error.
Then there you go...
4fun00 said:
Hey I succeeded to work this out!!
Here's what I did:
Download this file: Unsigned-Hard-SPL-Diamond-OliNex.zip
and this: RUU_Signed_1_93OliNex_HSPL_UnsignedEdition.zip (you can choose another developer version such as HardSPL_Olinex137_Unsigned.zip)
Now copy the file RUU_Signed.nbh of seconde archive to replace the one in the first archive. Then run the ROMUpdateUtility.exe of the 1st archive. As the moment the percentage bar appears, run the SSPL-Manual.exe of the 1st archive from your PDA (of course, this file must be copied to PDA before via ActiveSync).
Just run again ROMUpdateUtility.exe if you have a phone not responding error.
Then there you go...
Click to expand...
Click to collapse
Ok now, I got the same situation as described above, but the phone's software won't boot. I can just put it in the bootloader mode. I cannot put the SSPL Manual file on the device. How do I reflash it then? USPL said that this version is not supported. Any ideas? Thanks for any input.
please help me to flash rom always stack on 13%..
please help me..
Please try to read posts regarding updating your unit. You can brick your phone if you don't know what you are doing.
Additional information:
What is your present ROM version?
What ROM are you trying to install?
is your unit unlocked?
Does your unit have hard SPL installed?
ferdiebaq said:
Please try to read posts regarding updating your unit. You can brick your phone if you don't know what you are doing.
Additional information:
What is your present ROM version?
What ROM are you trying to install?
is your unit unlocked?
Does your unit have hard SPL installed?
Click to expand...
Click to collapse
i do, but the problem is vender id,
im tryn to install wm6.1 then always error vender id..
i forgotten now what is the previous rom version.
hard spl? like 1.20.0lipro? yah i already use it,
sorry for my bad english..
jheizee said:
i do, but the problem is vender id,
im tryn to install wm6.1 then always error vender id..
i forgotten now what is the previous rom version.
hard spl? like 1.20.0lipro? yah i already use it,
sorry for my bad english..
Click to expand...
Click to collapse
I have the same problem
but can't instal bootloader or flash any ROM
I tryed to flash the original rom but it stucks to 13%
I tryed to instal many bootloaders but when it cames to 100% it says that image is corruped (error 270)
can any one help me ??
up guys.. please i really need your help..
i want my trinity back..
OK. I've had that problem before when I first got my Trinity. Been through a lot of trial and errors before I was able to do it correctly. I don't know if this can help but this is how I did it. Usual warning.... I am not responsible if you brick your device.
Just look for the following files in the Trinity thread and install them in the following order:
1. HTC Trinity SIM & CID Unlock - v1
2. Install Olipro 1.20
3. Now I don't know if this should be done but I read somewhere that you should upgrade your Radio version so I installed "Trinity_Radio1.56.70.11"
Even though I have done these steps already I always do them again WHENEVER I install a new ROM. It does not hurt to repeat them.
If you are getting "error vender id" message then it means that your unit is locked again so you have to unlock it again like I said in my previous post. You must have installed an official ROM previously which will lock your phone again.
please help me to get my trinity back
i think that my phone has been locked because i can't instal any ROM or HardSPL
I tryed to flash windows d. 3.3 Dmore (wm 6.1) but when i boot windows it stucks in the green screen so i can't run cid unlock.
i cant send the phone for servise because i get it from a friend and i havent the receipt
please help me to get my trinity back
thanks guys.. my trinity is alive again.. hehehe
i just remove the radio.nb and its continue upgrading..
but the problem im facin now is everytime i flash radio its always stuck at 0%..
i think my radio bootloader is damage?..
any idea?
any have a schematic of radio ic? where i can find it? how does it looklike?
try to use SSPL, after flash official ROM and then try again from beginning
maybe can help...