Related
I am new to completely flashing a custom ROM. I've been trying to flash a new ROM on my tilt, with the latest AT&T updates(ROM 1.62.502.0 Radio 1.27.14.09). Each time I try to flash a custom ROM I get Error 262 Update Error. The progress bar never gets past 0%. I've tried multiple PCs and tried reinstalling ActiveSync. Am I missing something, or do I have to do something first before being able to flash the new ROM?
Any help is greatly appreciated!
Steve
i suggest u read all the wiki's and stickies regarding flashing a custom rom before taking any action...u obviously havent read it or havent got a good understanding of it which is why ur getting this error...and btw..i also suggest u search for solutions rather than just posting a thread like this which can be answered through a brief search of the forums.
I am about 100% sure you searched, didn't you?
Here, baby boy, let me spoon feed you and you can ask your mommy if she can whipe your drool:
http://www.digwin.com/view/schaps-wm6-pro-roms-update-error-262
bapssystupr3m3 said:
i suggest u read all the wiki's and stickies regarding flashing a custom rom before taking any action...u obviously havent read it or havent got a good understanding of it which is why ur getting this error...and btw..i also suggest u search for solutions rather than just posting a thread like this which can be answered through a brief search of the forums.
Click to expand...
Click to collapse
I have searched the forums over the past week or so. The solutions suggested such as soft reset, hard reset, reinstall activesync, switch USB ports, etc have not done anything. I also came across this thread:
http://forum.xda-developers.com/showthread.php?t=370205
which would suggest that I there is an incompatibility. I was hoping someone could point me in the direction of which radio version etc I would need to update to in order to update to a WM 6.1 ROM.
edit:yes I have run CID unlock.
Steve
AT&T 1.62.502.0 w/ 1.27.14.09 radio should flash fine on any Tilt even without CID unlock, since it's signed by AT&T. While I'm glad to hear your phone is CID unlocked, it's still strongly suggested that you flash HardSPL & Security Unlock your device.
Regarding your current issue, have you:
* Tried another computer to flash from?
* Entered tri-color bootloader mode on your phone prior to flashing? You can find out how to on the wiki.
Hope this helps!
_Alex_ said:
AT&T 1.62.502.0 w/ 1.27.14.09 radio should flash fine on any Tilt even without CID unlock, since it's signed by AT&T. While I'm glad to hear your phone is CID unlocked, it's still strongly suggested that you flash HardSPL & Security Unlock your device.
Regarding your current issue, have you:
* Tried another computer to flash from?
* Entered tri-color bootloader mode on your phone prior to flashing? You can find out how to on the wiki.
Hope this helps!
Click to expand...
Click to collapse
Thanks Alex! Tri-Color mode worked!
Steve
My error 262 fixed
I don't know if this is the best place to put this, but I didn't want to open a new thread.
I too had been getting repeated error 262. And I spent a couple of hours searching for answers, and while there have been many questions raised on this subject, there have been few clear solutions (and certainly none that worked for me).
I have the HTC branded Kaiser installing from Vista. (By the way I am new to this, but as I had such a hard time working this out, I thought I should at least post what worked for me.) I unlocked the CID with pof's Hard-spl v1 tool. Then (as I want to stay with Mobile 6.1) I upgraded the hard spl to v3.28 by JockyW. I then downloaded a number of Roms I wanted to try. That is where the trouble started.
Each ROM I tried would get past the tri-color screen with no problem. Then it would hang at the 0% until finally showing the error 262. A soft reset would reload my previous rom unchanged. I tried many things: removing all USB's, firewall, virus protection, hard reset, reboot windows, every suggestion I could find (and understand).
While the hard spl I had should have worked, I thought I should try version 3.29. When trying to upgrade to that I had a similar problem with error 260 this time. Looking over spl update instructions I realized I had forgotten to uncheck "disable usb connections" in "Activesync" at the proper stage. Once that was unchecked, the new spl loaded. After that I was able to load the cooked roms with no problem.
It appears there was something wrong with the HardSPL v3.28 I was using or in how I installed it. The tricolor screen was showing 3.28. In any case, after I reinstalled a new hard spl (this time 3.29), I had no more error 262.
A bit long-winded, but hopefully this might help someone else.
Hi Guys
I have tried allllllll the Different Hard SPL’s available for download – All of them give me the same communication error after attempting the install. Hard SPL starts normally… my phone goes into boot loader mode…..then active sync kicks out (un syncs) for some bizarre reason. I have tried it on different pc’s too with the same result. Could it be that the “South African Tytn agents or dealers installed something that prevents someone from installing different ROM’s on to the phone? I don’t think so. Anyone with ideas / suggestions…please help
Andre Mostert said:
Hi Guys
I have tried allllllll the Different Hard SPL’s available for download – All of them give me the same communication error after attempting the install. Hard SPL starts normally… my phone goes into boot loader mode…..then active sync kicks out (un syncs) for some bizarre reason. I have tried it on different pc’s too with the same result. Could it be that the “South African Tytn agents or dealers installed something that prevents someone from installing different ROM’s on to the phone? I don’t think so. Anyone with ideas / suggestions…please help
Click to expand...
Click to collapse
Have you tried following the instructions in http://forum.xda-developers.com/showthread.php?t=396922 (Post #2).
There are two sets, the second set of instructions is for when you are having problems.
Thanks
Dave
Dave, you are a star. Thanks a million!! It works like a charm. Appreciate the help.
Hi guys,
I am asking if there is anyone kind enough to help me with my kaiser...?
the issue is the following, the first week wm 6.1 was released I upgraded my kaiser with no problem until last weekend.
last weekend navigating through your forum I decided to install TF3D and a hardSPL was recomended, I downloaded the file SJ_JumpSPL1.93-KAIS and run it on my kaiser. I believe the process got stuck on the 3 color display, I rebooted the kaiser and it seemed ok... but I am not able to navigate the web neither by GPRS or 3G...
this morning I tried to reinstall the kaiser from scratch with a RUU named _HTC TyTN II_RUU_Kaiser_HTC_WWE_Brightpoint_US_3.29.422.1_radio_sign_25.83.40.02_1.70.18.02_Ship
which I downloaded from the HTC website but an error didn't allow it to be complete: ERROR 294: INVALID VENDER ID
HDa3-KBKV5867-HUEbc572-KBKV55670
my goal is to update my kaiser to the look as the TF3D or the amine 2.0 or the Hiperdragon.
I ask anyone of you gentleman to URGENTLY help me fixing my kaiser as this my office tool...
gomesmachado said:
Hi guys,
I am asking if there is anyone kind enough to help me with my kaiser...?
the issue is the following, the first week wm 6.1 was released I upgraded my kaiser with no problem until last weekend.
last weekend navigating through your forum I decided to install TF3D and a hardSPL was recomended, I downloaded the file SJ_JumpSPL1.93-KAIS and run it on my kaiser. I believe the process got stuck on the 3 color display, I rebooted the kaiser and it seemed ok... but I am not able to navigate the web neither by GPRS or 3G...
this morning I tried to reinstall the kaiser from scratch with a RUU named _HTC TyTN II_RUU_Kaiser_HTC_WWE_Brightpoint_US_3.29.422.1_radio_sign_25.83.40.02_1.70.18.02_Ship
which I downloaded from the HTC website but an error didn't allow it to be complete: ERROR 294: INVALID VENDER ID
HDa3-KBKV5867-HUEbc572-KBKV55670
my goal is to update my kaiser to the look as the TF3D or the amine 2.0 or the Hiperdragon.
I ask anyone of you gentleman to URGENTLY help me fixing my kaiser as this my office tool...
Click to expand...
Click to collapse
Why do people continue to screw up their phones by not reading, not understanding what they are doing, and doing things half the way. Are you all just rich and don't care about bricking a $500 dollar phone ? You are lucky you are able to recover your phone at all
Jumpspl is not hardspl . Jumpspl transitions your phone from stock spl to hardspl. You cannot flash any rom stock or custom ,that isn't specifically made for your carrier, until you have hardspl on your phone.
Read thoroughly and follow all the steps here, do not take short cuts and do not skip ahead,
http://forum.xda-developers.com/showthread.php?t=433835
canot do.....
Dear denco7
let me start to thank you for your help and specially point of view... jejejeje
no I am not crazy to ruin my kaiser and as you know it isn't a cheap phone to try to play with it without knowing what you are doing... anyway, that is why forums like this exist and specially kind people like you to help us crazy people... jejeje
well,
i followed your instructions carefully until number 6 on the list. once I tried to run any of the jumpSPL files this error message apeared in my kaiser
"The file 'JumpSPL1.56-KAIS' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
which I did and once again no luck....
Are you patient enough to continue helping me?
Dear denco7
let me start to thank you for your help and specially point of view... jejejeje
no I am not crazy to ruin my kaiser and as you know it isn't a cheap phone to try to play with it without knowing what you are doing... anyway, that is why forums like this exist and specially kind people like you to help us crazy people... jejeje
well,
i followed your instructions carefully until number 6 on the list. once I tried to run any of the jumpSPL files this error message apeared in my kaiser
"The file 'JumpSPL1.56-KAIS' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
which I did and once again no luck....
Are you patient enough to continue helping me?
gomesmachado said:
Dear denco7
let me start to thank you for your help and specially point of view... jejejeje
no I am not crazy to ruin my kaiser and as you know it isn't a cheap phone to try to play with it without knowing what you are doing... anyway, that is why forums like this exist and specially kind people like you to help us crazy people... jejeje
well,
i followed your instructions carefully until number 6 on the list. once I tried to run any of the jumpSPL files this error message apeared in my kaiser
"The file 'JumpSPL1.56-KAIS' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
which I did and once again no luck....
Are you patient enough to continue helping me?
Click to expand...
Click to collapse
What do the numbers say on your bootloader screen ( tricolored)?
it doesnt get that far, as soon as I doble click on the jumpspl file it shows that error message. the tricolored screen never apears
gomesmachado said:
it doesnt get that far, as soon as I doble click on the jumpspl file it shows that error message. the tricolored screen never apears
Click to expand...
Click to collapse
Press and hold camera button and power button and do a soft reset to get into bootloader to see what it says.
gomesmachado said:
it doesnt get that far, as soon as I doble click on the jumpspl file it shows that error message. the tricolored screen never apears
Click to expand...
Click to collapse
Thats because you're not making it go to that screen..
Press and hold camera button and press reset
it says:
KAIS130
SPL-3.28.000
CPLD-8
gomesmachado said:
it says:
KAIS130
SPL-3.28.000
CPLD-8
Click to expand...
Click to collapse
Go to the wiki and find the original rom from your carrier and flash that ie: AT$T , T- Mobile, orange , 3 etc. Then after doing trhat try all the steps in the flashing for noobs thread again.
the only problem is that I bought the phone not from a carrier but from a store in Portugal and the phone was unlocked...
do you think I can still find the original ROM?
I couldnt find any suitable rom for my device I tried:
_HTC TyTN II_RUU_Kaiser_HTC_WWE_Brightpoint_US_3.29.422.1_radio_sign_25.83.40.02_1.70.18.02_Ship
with no luck.
help me please...........
gomesmachado said:
I couldnt find any suitable rom for my device I tried:
_HTC TyTN II_RUU_Kaiser_HTC_WWE_Brightpoint_US_3.29.422.1_radio_sign_25.83.40.02_1.70.18.02_Ship
with no luck.
help me please...........
Click to expand...
Click to collapse
It is not 3.28.410.0 on this list ?
http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
Help me Denco7 you're my only hope.
Denco7,
I tired to run the file that you told me with no luck.
it showed the same message of before:
ERROR 294: INVALID VENDER ID
what else can I try to fix my phone?
Does this help
http://forum.xda-developers.com/showthread.php?t=335568
http://forum.xda-developers.com/archive/index.php/t-425558.html
Hi ladies and gentlemen!
I have tried and tried and tried to flash mi tilt, and no luck. I've followed the intructions(let me guess well if you followed the instructions then you shouldn't be having a problem? save it.) It's not working! :[[[[[[[[ It keeps giving me the error 262 update error. I did what the solution said to do which was to soft reset and enter bootloader, and i did that but still no luck. I 'flashed' wm6.1 i think well installed it from htc's website and it worked and stuff, but i hate it! It is so laggy when i text and it keeps going into sleep mode after 10 seconds or the backlight goes dim after 10 seconds i've tried fixing it with what htc says to do but it still does it after 10 seconds. AND kaisertweak wont work it says the file is corrupt; i've tried re-installing it so many times i threw my phone!!!! ;[ It still works but it has a dent on the side. It doesn't bug me Anyway, someone has to have a solution for all this! PLEASE!!! AND THANK YOU in advance. I also followed the instructions on 'flashing for newbs' and still no luck. If you need info on my phone here it is: WM6.1, (when entering bootloader with the power+camera+SR) 3.56, THE PHONE IS UNLOCKED(as in i can use t-mobile, verizon, etc.), and that's all i can remember lol. Oh yeah one more thing, i can't seem to get rid of the 'bloatware' :'[ I've tried many so-called 'solutions. :'[ no luck. HELP!
This is the second " help me with my phone " thread you have started in the rom development section. You are not developing a rom or aiding a chef in developing a rom. So stop starting new threads here. Your last one was locked, and so will this one. This is not the I'm a noob , help me section. If you are having a problem post it in the flashing for noobs thread. There is no problem that you are having hat hasn't already been addressed in that thread.
Have you flashed hardspl yet ? Which one 3.34, 3.56. 3.29. 3.29 cmonex ? Have you tried flashing from an SD card ? 262 is a usb error. Have you tried reloading activsync ? Have you Disabled anti virus and firewalls. Saying I've tried everything tells people nothing.
denco7 said:
This is the second " help me with my phone " thread you have started in the rom development section. You are not developing a rom or aiding a chef in developing a rom. So stop starting new threads here. Your last one was locked, and so will this one. This is not the I'm a noob , help me section. If you are having a problem post it in the flashing for noobs thread. There is no problem that you are having hat hasn't already been addressed in that thread.
Have you flashed hardspl yet ? Which one 3.34, 3.56. 3.29. 3.29 cmonex ? Have you tried flashing from an SD card ? 262 is a usb error. Have you tried reloading activsync ? Have you Disabled anti virus and firewalls. Saying I've tried everything tells people nothing.
Click to expand...
Click to collapse
I FIGURED SINCE THIS IS BEING POSTED IN THE "ROM" SECTION I WOULD GET HELP!!!! OKAY!!!! JEEEZ-IZ!!!!!!!!!! Yes, i've tried and it doesn't work. i have no anti-virus things on this pc. i've tried sd card too. 3.56 idk. If i'm going to get attitude for posting in the wrong section then no thanks i don't need this XXXX from you or anyone else. XXXX
Mod Edit: Edited swear as no need for that and against forum rules
Moved as not ROM Development and in previous you was given some ideas, have you tried another computer? Tried hard-resetting phone? Tried another stock from provider or even better:
Posted in here:
Flashing Your First Kaiser Rom (For Noobs)
Maybe a better place to get help
Please post in correct sections no matter how you think you may get more responses.
Have you tried indenting paragraphs or cutting up your post so that it can be read?
Is it just me, I can't read that stuff?
So, if his phone is unlocked, is it possilbe his phone is already set to flash? I guess it depeneds on how it's unlocked.
I FIGURED SINCE THIS IS BEING POSTED IN THE "ROM" SECTION I WOULD GET HELP!!!! OKAY!!!! JEEEZ-IZ!!!!!!!!!! Yes, i've tried and it doesn't work. i have no anti-virus things on this pc. i've tried sd card too. 3.56 idk. If i'm going to get attitude for posting in the wrong section then no thanks i don't need this XXXX from you or anyone else. XXXX
Click to expand...
Click to collapse
You figured wrong, twice apparently, so Mr. Denco was showing you your failures in figuring. You got the "attitude" for posting in the wrong section TWICE.. When a mod closes or moves the thread, they explain why..
Hello my name is is Richy and I am hoping someone anyone can help me out. I currently have an HTC TILT 2 (AT&T) I am trying to download NRG ROM to my HTC TILT 2 BUT I can't get my phone to HARD SPL. I am getting an error message stating; error code 246 Device not responding.The update utility cannot get a response from your PDA Phone. Please check that your USB/CABLE is connected properly between the PC and your PDA Phone. Also check your PDA Phone. Can you please help I tried everything.
[email protected]
Hi, first of all, you should probably post your problems here:
http://forum.xda-developers.com/showthread.php?t=550540
This is the official HardSPL thread. It may seem like it's too long for anyone to bother reading, but there are THOUSANDS of us, with nothing better to do than lurk in threads in the middle of the night and help others in need.
Now, you say you are having an issue with HardSPL, however, it looks like you are going straight to the EnergyRom (good choice in ROM, BTW)
Make sure you have an ActiveSync connection first before you start, then follow the steps at the above link to the letter. Any further questions, feel free to post in the appropriate thread.
paparichy said:
Hello my name is is Richy and I am hoping someone anyone can help me out. I currently have an HTC TILT 2 (AT&T) I am trying to download NRG ROM to my HTC TILT 2 BUT I can't get my phone to HARD SPL. I am getting an error message stating; error code 246 Device not responding.The update utility cannot get a response from your PDA Phone. Please check that your USB/CABLE is connected properly between the PC and your PDA Phone. Also check your PDA Phone. Can you please help I tried everything.
[email protected]
Click to expand...
Click to collapse
Look here...http://forum.xda-developers.com/showthread.php?p=5300845&highlight=enablerapinew.cab#post5300845