Can't make CID unlock - HTC Breeze

I need to CID unlock HTC Meteor (need to change language from ENG to Russian)
I have such ipl, spl
bree100
ipl-1.00
bree100
spl-1.10.0000
I made application unlock, but while launching SSPL-HERM.exe the devicу just turns off. If I enter bootloader instead of launching the file then I have error in flashing of this file HermesUnlocker_HardSPL.nbh The device tries to flash, going to 7% anв says there is an error and the device then boot in normal mode.
When I try to install thesese packages Cert_SPCS.cab & EnableRapi.cab I have some error, so I can't install them.
I made application unlock and now I DOESN'T HAVE this error (insufficient trustlevel. You need to application unlock your device (or sign executable with privileged cert), so I can install third parties software.
What should I do know?

i dont know whats you mean ! why not ask for help from jerpelea ?

Just try this cab file.You r russ,i'm from China,and we are firends!

Related

Slight Problem with the flashing

I've bought myself a MDA Vario (T-mobile NL).
But i have a other provider so i treid to unlock it which failed.
So i downgraded to IPL:1.01 and SPL:1.01 using the button 1.05 rom.
And then unlocked using lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b.
I also unlocked the CID and i didn't see any errors in my dos prompt.
Now i am trying to upgrade again and it keeps failing, i get to the green red bleu screen but then it hangs. The phone works but i want newer software.
When i boot it says i have: IPL:1.01 and SPL:1.01.0000 GSM:1.12.10.0 and OS:1.5.4.2.
When i try to run lokiwitz again to unlock my CID it says that a file is inuse and doesn't finish. The first time it didn't do this.
I like to upgrade to: T-Mobile 2.26 ROM or http://forum.xda-developers.com/showthread.php?t=330080, i preffer the second rom.
Can someone tell me what is wrong, is it possible the CID unlock failed and it doesn't show?
MSSH said:
I've bought myself a MDA Vario (T-mobile NL).
But i have a other provider so i treid to unlock it which failed.
So i downgraded to IPL:1.01 and SPL:1.01 using the button 1.05 rom.
And then unlocked using lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b.
I also unlocked the CID and i didn't see any errors in my dos prompt.
Now i am trying to upgrade again and it keeps failing, i get to the green red bleu screen but then it hangs. The phone works but i want newer software.
When i boot it says i have: IPL:1.01 and SPL:1.01.0000 GSM:1.12.10.0 and OS:1.5.4.2.
When i try to run lokiwitz again to unlock my CID it says that a file is inuse and doesn't finish. The first time it didn't do this.
I like to upgrade to: T-Mobile 2.26 ROM or http://forum.xda-developers.com/showthread.php?t=330080, i preffer the second rom.
Can someone tell me what is wrong, is it possible the CID unlock failed and it doesn't show?
Click to expand...
Click to collapse
download WST TOOL from the link below and apply to check the unlock staus of your phone,if it says locked again apply the method of unlocking correctly
http://forum.xda-developers.com/showthread.php?t=329170
Error:
'When i try to run lokiwitz again to unlock my CID it says that a file is inuse and doesn't finish. The first time it didn't do this.'
I think you did not copied the Enablerapi.cab file in your phone correctly or executed it in there
good luck
Fixed it,
After reinstalling the EnableRapi.cab which got lost in some sort of way. Everything went A ok
MSSH said:
Fixed it,
After reinstalling the EnableRapi.cab which got lost in some sort of way. Everything went A ok
Click to expand...
Click to collapse
GRRRRRRRR8
Glade I was of any help,Happy flashing
Good luck

HTC PM 200 (T Mobile) can't update language!

Hi
I have a HTC PM 200 from T Mobile. It has german language (win mobile 5) and I just want to update language from german to english.
I know that first of all I have to make a CID unlock. But because i have a AKU 2 SPL 2.06.0001 i can't make a CID unlock for this SPL. I read that I should try to do a CID unlock with lokiwiz03a. But this utlity (as far as I read) cannot make CID unlock ... just SIM unlock. Phone is already SIM unlock.
I tried even ''ROMUpdateUtility_Wizard_NoID.exe'' following detailed info from forum but in the end: Vendor ID Error.
So I'm stuck with german language.
Any help guys ?
Thx!
You dont need to CID unlock your device, you just need the NO_ID RUU to flash another WM5 rom. You can find it somewhere in the Charmer Upgrading forum. Good luck.
I used: ROMUpdateUtility_Wizard_NoID.exe and the message is:
Vendor ID error.
or
Invalid Vendor ID
For ROM I Used: RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship
Phone is put in Bootloader mode but after that error above appears.
And most of the links from Charmer forum are 2 years old and are ''dead''.
http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
This is what you need.

Sanity Check - Still CID Unlocked?

So I've upgrade my old 8125 successfully - got a new one due to a second USB port coming off main board. This new one is a slightly newer model - T2. Anywho - Was running Lokiwiz to CID and SIM unlock. Successfulyl Sim unlocked - also THOUGHT i successfully CID unlocked it (based on the progress of the program - all the way through auto hard reset),
but apparantly I didn't (as confirmed by the MTTY tool telling me I don't have sufficient privelages to create image of rom and an invalid Vendor ID error upon tmobile rom RUU). Also i get the familiar "fat format failure" message at the option screen when hard resetting.
So i can flash the heck out of the device with old and new Cingular roms as well as the TouchFlo and Touch Diamond roms but the only thing that changes after successful flashing is the splash screen and depending on the ROM the IPL/SPL number. The device remains frozen and hangs on the Boot Loader screen.
So in attempt to get this thing up and running i need a sanity check.
Mmy first question is
1) Based on info above would you agree the device is still CID unlocked?
2) Is there (cuz I can't find one) a utility besided IMEI unlock to get into the phone and CID unlock it through the RBG boot loader screen?
3) Since I UNSUCCESSFULLY CID unlocked the device using Lokiwiz in the first place - I still have the output file from Lokiwiz - is there a way that the IMEIUNLOCK progrogram from IMEI UK can read this binary file and unlock the device or do i just need to pony up the 40bucks and CID unlock this.
I can't think of another way to get back to a functioning device.
Additional Thoughts
I also had a thought - which is probably an impossibility - but is there any way if I get the IMEI unlock code from Cingular to somehow get it into the IMEI Unlock software or use some other program like MTTY to insert that code into the phone?
DAMN! - I still don't know how the CID unlock didn't go through the first time. -Maye it was because the rom didn't roll back.
BRoke Down
and purchased IMEI unlock - unlocked just fine. Now I was able to upgrade to the Tmobile rom- INstallation went through without a hitch- now I am stuck on the Tmobile Boot loader- WTF can't I get past the boot loader on any rom I use? This makes no sense. Anyone have any thoughts? IPl and SPL at this point both show 2.26. THis is really pissing me off.
Try using the SD method to create a OS ROM dump and restore it. Some people works with it.

where i download spl version 1.XX

hi friends
i have wiza200 it show me data crash and its Lock to T-mobile network
so i want to unlock it
how to i unlock please help me
but first i want remove that "data crashes" message which show me on my phone and my phone index key is 42 so i want to write new cid to my phone using wizard service tool
but it show me that
"
Downgrade SPL to no higher than 1.06 and
repeat procedure.
"
so how to i downgrade it??
please help me
thank you in advance

Splash screen stuck-assistance needed

If is there anyone active on this thread, for this old bugger, please assist.
I'm on SPL, non hard, no CiD unlock no nothing
The kais 130 enter tricolor mode with no problem.
It is the mda vario iii model from tmobile with cid tmob101. I cannot find anywhhere a stock rom that works as all says invalid vendor id.
When booting i can see the t mobile logo and radio verion but it is stuck. When trying mtty boot command it says unknown command.
Trying to use sd hardspl with the kaisdiag and kaisimg file but it stucks at Loading screen and does nothing.
Any idea on what to do next?
I know its a longshot as it is an old device, but maybe some old user may help as i am trying to bring this classic back life.

Categories

Resources