hi friends
i have wiza200 it show me data crash and its Lock to T-mobile network
so i want to unlock it
how to i unlock please help me
but first i want remove that "data crashes" message which show me on my phone and my phone index key is 42 so i want to write new cid to my phone using wizard service tool
but it show me that
"
Downgrade SPL to no higher than 1.06 and
repeat procedure.
"
so how to i downgrade it??
please help me
thank you in advance
Related
Hi All,
I unlocked my device (cingular 8125,wizard), changed cid with spv services to 11111111, updated my rom after. this worked fine, but when I restart the device it appears the sim lock window.
now I Have :
ipl 2.25
spl 2.25
gsm 02.25.11.1
I tried with lokiwiz 02/03 to get the new code but it appears a crazy code in the dos box. See please attached file. Does anybody know what is wrong ??
Can anybody help me ? I can´t use my device at this time.
Thank you
hello
my device is sioped in bootloader screen its cant logon so its make sync with activesync
i think my devices is CID locked NOW CAN I MAKE cid UNLOCK FROM BOOTLOADER
please help me
thank for all
ok, i cant understand a single thing your saying....
albttar1001 said:
hello
my device is sioped in bootloader screen its cant logon so its make sync with activesync
i think my devices is CID locked NOW CAN I MAKE cid UNLOCK FROM BOOTLOADER
please help me
thank for all
Click to expand...
Click to collapse
Try flashing an official ROM. You really need to give us more information about your phone and what you did to get it "stuck".
--M
albttar1001 said:
hello
my device is sioped in bootloader screen its cant logon so its make sync with activesync
i think my devices is CID locked NOW CAN I MAKE cid UNLOCK FROM BOOTLOADER
please help me
thank for all
Click to expand...
Click to collapse
Do you have a G3 or G4 device?
Did you read the stickies on unlocking your device?
What did you do to make your device get stuck in bootloader?
What is your current IPL/SPL
Who is your carrier?
Why do you want to flash your device and do you truly need to?
If you have not personally unlocked your device then it most probably IS locked. CID lock is not the same as SIM lock.
*IF* your device is a G3 I suggest flashing the button 1.05 rom and then following the steps in the unlocking sticky. *IF* your device is a G4 reflash your carrier's latest rom and then find the G4 unlocker website link in the G4 section of this forum.
1 my device is G3
2 I do unlock 2 time
3 after I install wm6 I suggest flashing the button 1.05 rom then the device is stop in splash screen
4 now my IPL/SPL 1.01
albttar1001 said:
1 my device is G3
2 I do unlock 2 time
3 after I install wm6 I suggest flashing the button 1.05 rom then the device is stop in splash screen
4 now my IPL/SPL 1.01
Click to expand...
Click to collapse
If you went back to 1.05 from a 2.xx ROM you'll need to unlock it again. (if you have already then...) After 1.05 ROM you need to go to a 2.xx (we suggest the TMobile 2.26 production ROM). After you have done the 2.26, you can then flash a custom WM5 or Faria's WM6 ROM. You can only "upgrade" FROM a 2.xx ROM.
--M
mr demontefixo
I install 1.05 then I unlock CID then my device not logon (it stoped in splash screen)
I try install ROM 2.26 but this not repair my proplem
I think solution if i unlocker my CID from bootloader but Inot have method to do that
thanks
I've bought myself a MDA Vario (T-mobile NL).
But i have a other provider so i treid to unlock it which failed.
So i downgraded to IPL:1.01 and SPL:1.01 using the button 1.05 rom.
And then unlocked using lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b.
I also unlocked the CID and i didn't see any errors in my dos prompt.
Now i am trying to upgrade again and it keeps failing, i get to the green red bleu screen but then it hangs. The phone works but i want newer software.
When i boot it says i have: IPL:1.01 and SPL:1.01.0000 GSM:1.12.10.0 and OS:1.5.4.2.
When i try to run lokiwitz again to unlock my CID it says that a file is inuse and doesn't finish. The first time it didn't do this.
I like to upgrade to: T-Mobile 2.26 ROM or http://forum.xda-developers.com/showthread.php?t=330080, i preffer the second rom.
Can someone tell me what is wrong, is it possible the CID unlock failed and it doesn't show?
MSSH said:
I've bought myself a MDA Vario (T-mobile NL).
But i have a other provider so i treid to unlock it which failed.
So i downgraded to IPL:1.01 and SPL:1.01 using the button 1.05 rom.
And then unlocked using lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b.
I also unlocked the CID and i didn't see any errors in my dos prompt.
Now i am trying to upgrade again and it keeps failing, i get to the green red bleu screen but then it hangs. The phone works but i want newer software.
When i boot it says i have: IPL:1.01 and SPL:1.01.0000 GSM:1.12.10.0 and OS:1.5.4.2.
When i try to run lokiwitz again to unlock my CID it says that a file is inuse and doesn't finish. The first time it didn't do this.
I like to upgrade to: T-Mobile 2.26 ROM or http://forum.xda-developers.com/showthread.php?t=330080, i preffer the second rom.
Can someone tell me what is wrong, is it possible the CID unlock failed and it doesn't show?
Click to expand...
Click to collapse
download WST TOOL from the link below and apply to check the unlock staus of your phone,if it says locked again apply the method of unlocking correctly
http://forum.xda-developers.com/showthread.php?t=329170
Error:
'When i try to run lokiwitz again to unlock my CID it says that a file is inuse and doesn't finish. The first time it didn't do this.'
I think you did not copied the Enablerapi.cab file in your phone correctly or executed it in there
good luck
Fixed it,
After reinstalling the EnableRapi.cab which got lost in some sort of way. Everything went A ok
MSSH said:
Fixed it,
After reinstalling the EnableRapi.cab which got lost in some sort of way. Everything went A ok
Click to expand...
Click to collapse
GRRRRRRRR8
Glade I was of any help,Happy flashing
Good luck
Hi
I have a HTC PM 200 from T Mobile. It has german language (win mobile 5) and I just want to update language from german to english.
I know that first of all I have to make a CID unlock. But because i have a AKU 2 SPL 2.06.0001 i can't make a CID unlock for this SPL. I read that I should try to do a CID unlock with lokiwiz03a. But this utlity (as far as I read) cannot make CID unlock ... just SIM unlock. Phone is already SIM unlock.
I tried even ''ROMUpdateUtility_Wizard_NoID.exe'' following detailed info from forum but in the end: Vendor ID Error.
So I'm stuck with german language.
Any help guys ?
Thx!
You dont need to CID unlock your device, you just need the NO_ID RUU to flash another WM5 rom. You can find it somewhere in the Charmer Upgrading forum. Good luck.
I used: ROMUpdateUtility_Wizard_NoID.exe and the message is:
Vendor ID error.
or
Invalid Vendor ID
For ROM I Used: RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship
Phone is put in Bootloader mode but after that error above appears.
And most of the links from Charmer forum are 2 years old and are ''dead''.
http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
This is what you need.
If is there anyone active on this thread, for this old bugger, please assist.
I'm on SPL, non hard, no CiD unlock no nothing
The kais 130 enter tricolor mode with no problem.
It is the mda vario iii model from tmobile with cid tmob101. I cannot find anywhhere a stock rom that works as all says invalid vendor id.
When booting i can see the t mobile logo and radio verion but it is stuck. When trying mtty boot command it says unknown command.
Trying to use sd hardspl with the kaisdiag and kaisimg file but it stucks at Loading screen and does nothing.
Any idea on what to do next?
I know its a longshot as it is an old device, but maybe some old user may help as i am trying to bring this classic back life.