Devicelock without return to Today screen? - Touch Diamond, MDA Compact IV General

tI use the standard device lock that comes with WM.
However, it goes back to Today screen everytime after lock.
Can anyone tell me how to stay at the original screen after lock?
Thanks

HTC's LongPressEndKey
go to Settings/System/HTC LongPressEndKey...
i don't know how you can make it stay at the original screen: since WM5, afaik locking has taken you back to the home screen

When I want to lock the device I just give a short press of the button on the top - that switched the device into sleep mode, the screen goes off and all the keys lock. To do that go into settings/keylock and then choose under "when device is off" "lock all buttons except power button".
One short press again on the top button then wakes it up and switches it on and it comes back to the screen you were last in when you switched it off.
Is that what you want?

peterc10 said:
When I want to lock the device I just give a short press of the button on the top - that switched the device into sleep mode, the screen goes off and all the keys lock. To do that go into settings/keylock and then choose under "when device is off" "lock all buttons except power button".
One short press again on the top button then wakes it up and switches it on and it comes back to the screen you were last in when you switched it off.
Is that what you want?
Click to expand...
Click to collapse
It's not really locked is it? You turn the phone on and it works as normal. Similarly with the screen lock, you just push 'unlock' that appears on the screen and it works as normal. What I need is the device lock as found in settings. I just need it on an icon in my programs list would be good enough.
Pete

Found what I want at
http://forum.xda-developers.com/showthread.php?t=408946&highlight=device+lock
if anybody wants it.
Pete

qwertgfdsa78 said:
tI use the standard device lock that comes with WM.
However, it goes back to Today screen everytime after lock.
Can anyone tell me how to stay at the original screen after lock?
Thanks
Click to expand...
Click to collapse
Anyone did resolve this problem? I tought it's me, but have found the same problem here.
Help appreciated!

wizja said:
Anyone did resolve this problem? I tought it's me, but have found the same problem here.
Help appreciated!
Click to expand...
Click to collapse
You can try StylusLockPro special designed for locking/unlocking while a running application is active.

Related

Tilt Annoyance

Hello all,
I just got my AT&T Tilt and love it so far, except for one major annoyance. When I press the power button, the device will turn the screen back on after a few seconds to a few minutes. The problem is when it's in my pocket, it can accidentally call people. My 8125 and 8525 did not experience this issue.
Any suggestions?
Thanks!
Button lock
It sounds as though the phone isn't set to lock all buttons except the power button when it is in standby. This happened to me last time I re-flashed my Wizard, and I couldn't figure out for ages why my battery was draining so quickly as well!
Settings > Buttons > Lock
Hmm, not seeing any option under Buttons or Lock. I do remember this setting from WM5. It does appear, however, that the buttons are not turning the phone on, it's just waking up even if I leave it on a desk.
You can add lock to the home screen
first press and hold the hang-up button so that it locks. Then just push the power button once. This puts it in standby.
There is a idle timeout for going on standby mode, but I can't find a setting to auto-lock.
JBHorne said:
When I press the power button, the device will turn the screen back on after a few seconds to a few minutes.
Click to expand...
Click to collapse
Are you paired to a Bluetooth device? I see similar behavior in my 8525 when in my car - the BT car kit does stuff which "wakes" the 8525
Richard
Try this leaving Google Maps On the Screen
Hi Guys,
I get this behavior when I have Google Maps running. It will even cycle the screen on and off a couple times.
nope and nope. just sitting on the today screen.
JBHorne said:
When I press the power button, the device will turn the screen back on after a few seconds to a few minutes.
Click to expand...
Click to collapse
I have the very same problem.
However, my girlfriend whom I also bought a Tilt for, her's doesn't do it.
We've installed all the same software too, so I'm a little puzzled.
start>settings>system> key lock. set it to lock all buttons except power.
rzanology said:
start>settings>system> key lock. set it to lock all buttons except power.
Click to expand...
Click to collapse
Hmmm.. yeah, umm my key lock is already set to lock all buttons except power.
The problem isn't with when you press a button it comes on. The problem is the phone turns on by itself, sitting on a table, nothing being pressed, no new email, no new sms, just lights up and that's it.
JonRick said:
Hmmm.. yeah, umm my key lock is already set to lock all buttons except power.
The problem isn't with when you press a button it comes on. The problem is the phone turns on by itself, sitting on a table, nothing being pressed, no new email, no new sms, just lights up and that's it.
Click to expand...
Click to collapse
Any number of applications might be starting the device, from weather apps to calendar, diary, time sync etc etc. For example, HTCs weather app will do it depending on how often you have it set to another example I came across from someone was TREO ALERTS that contains a script "refresh.mscr" and it was set up refresh time 30 seconds (this was turning his TyTn II on by itself).
Mike
hard reset and try again.
i'm betting that none of these suggestions were helpful (except the one about some application generating a wakeup event without any other visual notifications).
i was having the same problem, but i just tried to narrow down which running program was causing the events. it's one of:
* wireless manager
* messaging
* IM
my guess is IM; i'm going to test that out in a second.
well, it's none of the above. still seems to wake up randomly anywhere from 15 seconds to several minutes.
seems to happen more frequently when it's just been turned off.
Even if you were to find what was turing the phone back on, this can still be a problem just from normal use... obviously, you WANT the phone to turn on for things like a call coming in. The solution for people like us who stick our phones in our pockets is to "lock" the phone. But for whatever reason, the Tilt doesn't lock the phone while holding down the end key. That means the only convenient way to lock it is to keep the lock function on the today screen, wasting space. Hopefully someone can find a way to allow the end key to lock the device on the Tilt just like the unbranded device.
dscline said:
Even if you were to find what was turing the phone back on, this can still be a problem just from normal use... obviously, you WANT the phone to turn on for things like a call coming in. The solution for people like us who stick our phones in our pockets is to "lock" the phone. But for whatever reason, the Tilt doesn't lock the phone while holding down the end key. That means the only convenient way to lock it is to keep the lock function on the today screen, wasting space. Hopefully someone can find a way to allow the end key to lock the device on the Tilt just like the unbranded device.
Click to expand...
Click to collapse
i'm fine with using the lock function, but it still turns on randomly, using battery, and eventually unnecessarily yellowing the screen from backlight aging. my next approach is to check out the notification queue, using a notification cleaner app.
So i am having a similar problem. When i press the power button, the phone's screen turns off but when the keyboard slides, it turns back on... is there a way to make it so the keyboard sliding does not turn on the device? I think the keyboard slides around a little when in my pocket and i hate pushing 3 buttons to unlock my phone... thanks
I was having the same problem.
This is an issue with the ATT rom. Flash over HTC rom and you will be all set.
I have been having the same problem as well. I just installed this DeviceLock program:
http://forum.xda-developers.com/showthread.php?t=305402
If you enable the "Lock on Wake" option, the device will be locked when it wakes up, so the backlight stays off and you won't call anyone by accidentally hitting buttons.
Also, I ran across this related thread you might want to check out (basically talking about the same thing, but for the TyTn II):
http://forum.xda-developers.com/showthread.php?t=341419

Kaiser goes to today screen on resume from standby

If my Kaiser goes into standby, say on the mail screen, if I hit the power button or slide the slider to turn it back on, it goes back to the today screen.
Is there a way to stop this?
You probably have an application that does this, there are a lot offering this feature.
Gah,
I have kaisertweak, phweaver and HHC installed, could it be one of those?
Password
Are you password protecting your phone? If so, this can cause the Today screen to pop-up after you resume from standby, even if you are not prompted to enter a password.
nope, no password protect - I have WIMP, I *want* anyone who steals it to use it
May it's the setting 'Today timeout:' under Settings/Personal/Today/Items...
have the same problem with my touch. idea anyone? have the HHC installed, maybe it's an option of this program?
still have this problem - driving me crazy! plz help ...
bump old thread bcuz im having this issue now too...& this seems to have never been resolved.
it never used to happen, but i just got an rma w/ a a new rom 162 instead of 157 i was running on the old phone. so i'm assuming its a "feature" set in the new rom, but its annoying. also its frustrating bcuz i cant use that "camera workaround" where you cover the camera, hit the power button to sleep it, then resume...thus im back to stuck w/ a crap camera.
any thoughts/suggestions? thanks.
evilc said:
If my Kaiser goes into standby, say on the mail screen, if I hit the power button or slide the slider to turn it back on, it goes back to the today screen.
Is there a way to stop this?
Click to expand...
Click to collapse
I have the same problem (Kaiser WM 6.1 Official. 3.28.462.1)
Any solution?
leon100 said:
May it's the setting 'Today timeout:' under Settings/Personal/Today/Items...
Click to expand...
Click to collapse
this sounds right....just uncheck the today timeout box....or set it to however long you want it to be....problem sorted hopefully
Humz said:
this sounds right....just uncheck the today timeout box....or set it to however long you want it to be....problem sorted hopefully
Click to expand...
Click to collapse
no, I have unchecked box of Today timeout, but still doesnt working.
When i resume Kaiser from standby (by press On/Off button) then always go to Today screen.
Probably need a soft reset for the shell to pick up the change in settings.
ButtonBoy said:
Probably need a soft reset for the shell to pick up the change in settings.
Click to expand...
Click to collapse
No, this step doesn't working. When I push On/Off button, all aplicaton (for ex. sms/mail) will be minimazed and I'll see only Totay screen
There is no solution?
kimosak said:
No, this step doesn't working. When I push On/Off button, all aplicaton (for ex. sms/mail) will be minimazed and I'll see only Totay screen
There is no solution?
Click to expand...
Click to collapse
I solve this problem It cause a BatteryStatus TodayPlugIn.. thanks for your help very much...

FakeCursor

Does anyone have experience in configuring FakeCursor?
I've kind of got it to work so far, I've assigned a hardware button to launch FakeCursor via it's shortcut, however when I press the button again to turn FakeCursor off it always goes back to the Home screen, which is annoying.
What I'd like to be able to do is just have one button which turns the cursor on and the same button to turn it off? Any ideas how I could get that configured?
Cheers
try sphelper, this is i think better...
darksider said:
try sphelper, this is i think better...
Click to expand...
Click to collapse
SPHelper doesn't work with TomTom at all.
Mark Hewitt said:
Does anyone have experience in configuring FakeCursor?
I've kind of got it to work so far, I've assigned a hardware button to launch FakeCursor via it's shortcut, however when I press the button again to turn FakeCursor off it always goes back to the Home screen, which is annoying.
What I'd like to be able to do is just have one button which turns the cursor on and the same button to turn it off? Any ideas how I could get that configured?
Cheers
Click to expand...
Click to collapse
I have it mapped with Long_Home.lnk. The cross-hairs will appear for a second, then disappear and only reappear when you move it (with the directional pad).
Hold home to turn it on, hold home to turn it off (it will put you back on the home screen when it exits, this is a [poor] function of FakeCursor).
bigflavor said:
I have it mapped with Long_Home.lnk. The cross-hairs will appear for a second, then disappear and only reappear when you move it (with the directional pad).
Hold home to turn it on, hold home to turn it off (it will put you back on the home screen when it exits, this is a [poor] function of FakeCursor).
Click to expand...
Click to collapse
That's exactly how I have it configured . I was wondering if there was a way it wouldn't dump you back to the home screen, but it seems not?
Mark Hewitt said:
That's exactly how I have it configured . I was wondering if there was a way it wouldn't dump you back to the home screen, but it seems not?
Click to expand...
Click to collapse
I'm pretty sure that is a function of FakeCursor, not the mapping. It would be nice, but FakeCursor hasn't been updated for several years.

Lock Screen or put into "standby"? Best set-up?

Hey guys,
Right, I've come over from symbian, namely UIQ and the SE P-series, so am used to things being somewhat different. The main issue I don't seem to be able to find a solution to is the screen locking problem.
Essentially, at the moment I push the power button to lock the device, as well as enter a power save mode. I have to say, I like the way that works. However, when I recieve a call (or text with the reg fix) the phone comes to life, great, but say I miss the call, or the phone is in my pocket, the screen is now ACTIVE. Not good news.
How am I supposed to lock this device properly? Screen lock and then the power button? Can't I get a simple tap on the power button to lock and power save the device?
Essentially, if I have a missed call or message I just want the phone to vibrate once, then keep an LED flashing intermittently. But I want the screen to stay LOCKED.
Any help would be much appreciated, and thanks for all the other useful tips on the forum!
Cheers,
Daz.
Go start/settings/System/Long Press End Key
Select automatically execute etc
and Lock device
then OK
then, a long press on the hang up button (bottom right) will lock the phone.
Hope that helps
Perhaps I didn't explain myself. I know how to lock the phone, but how do I make use of the power button tap mode? In other words, the power saving mode?
Can I set up a button that locks the phone, AND sends it to power save mode? (or "turn it off" as WM seems to call it).
Thanks again,
Daz.
I found a regedit in:
HKLM\Software\HTC\KeyLock\SameAsDeviceLock
Set it to 1, but it doesn't do the trick. In fact, it now causes the power button click to not lock the keys.
I suppose the only option is to have standby mode come on after a timeout, lock the device, then it will go into standby on its own. Seems like a slight waste of battery to me!
Cheers,
Daz.
I really want this to work too,
It should unlock and turn on when recieving a call, it should just turn on when recieving an sms (so you can have a quick look from who it is, and then unlock to reply)
and when you lock the device it should automatically turn off...
Not EXACTLY what you want, but S2U2 in the "Development and Hacking" section will improve matters for you.
When you turn the phone off with the power button, S2U2 kicks in. Then:
1) If you turn the phone back on, you'll get the slide to unlock screen.
2) If a call comes in, the phone turns on and you see the caller ID (with full screen picture, if you so desire) on a "slide to answer" screen. The S2U2 default settings ensure that the phone turns itself back off again if you fail to answer it.
3) If a text / e-mail / mms comes through, it notifies you but remains off... When you hit the power button, the "slide to unlock" screen will show missed calls, text messages, e-mails (and even the weather if you want...).
Check it out, it's an essential piece of software in my opinion... http://forum.xda-developers.com/showthread.php?t=381588
Thanks sub69, great recommendation. However, does anyone else get the bug when hitting the "x" in other applications to close them, the status bar (Or task bar) goes all scrambled and looks like the S2U2 status bar.
Shame this isn't built in though, would be nicer to see the TF3D interface rather than a 3rd party one.
Thanks again!
Daz.
Anyone with other suggestions? S2U2 is just a little too buggy at the moment on the diamond...
use "BatteryStatus" from www.chti-tai.info, they have a option for devicelock on wakeup, so even u missed a call, and the screen light up, it is still locked.
somone posted this on other thread.
--------------------------------------------------------------------------------
Now we don't need any devicelock software with diamond.
If you want automatic lock your diamond you have to change this registry key HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off automatically your device are locked
Sorry for may bad english but i'm italian.
Ciao
Thanks for that reg fix, seems like a good option. There was a new S2U2 version release, 1.5, and that seems to work well for me. Will see how that goes for now...
Cheers guys! Daz.
the reg edit is good, but it doesn't solve the problem of unlocked touchscreen prone to being pressed during incoming call (when scrambling in your pocket to take out the phone)
btw there are several other threads where this problem is addressed and deeply analyzed (without a complete working solution, however...)
dazbradbury take a look at sensorlock, if you have not already.

[Q] Problems with buttons home and back

Hi, i've got a problem with the Home and Back buttons. Sometimes when i double-click the home button becomes locked and i have to lock and turn on the screen for it to work
Is this problem normal? I've got a screensave and i don't know if that can cause it
thanks
vaifer said:
Hi, i've got a problem with the Home and Back buttons. Sometimes when i double-click the home button becomes locked and i have to lock and turn on the screen for it to work
Is this problem normal? I've got a screensave and i don't know if that can cause it
thanks
Click to expand...
Click to collapse
Take a look at what you installed prior to issue showing up, if it was the screensaver then remove the screensaver to see if the issue goes away. If it did then it is your cause, if not what else did you do the phone. Don't forget to reboot the phone after each step to clear out any caches or residual programs.

Categories

Resources