Database Develop

stuck at bootscreen, have try several way

now almost a month i've been trying to get my D810 live again. i know there are many similar problem, but still don't get idea how i can make it work again.
could someone point me another way to recover my problem?
right now my D810 is stuck at tricolor mode. i can't flash Hard-SPL from computer, always fails, when progress is about to begin suddenly, it's restarted. i did continue the process with recovery but the result is same, could not update.
i have also try miniSD way. i've copy ROM into it and change name to TRINIMG.nbh, it's ask for 'Press power button to update', when i press the button. the process is begin. at some percentage it got stuck again. the error message was:
"Update Terminated
UPDATE FAIL"
also have try to copy HardSPL nbh to pda. using this nbh, still ask for 'Press power button to update', when i press the button, process is begin, and success. But later i restart the phone, result is not good, this time is stuck at White screen with the HTC logo
that my problem, thanks. any suggestion are welcome and great thanks for it
btw at first i use Olipro 1.30 and update at latest radio and use FInixNOver, i did make a successfull Update, but later it got hang at bootloader, so i get reflash with olipro 1.1. got run again. but later got stuck again. for short. i've also try HardSSPL_ZakMcRofl, ROM team Cv93, Marry

success to bring alive
that one thing that i have not try and i just try this now, using splxploit
http://trinityguides.info/index.php?option=com_content&task=view&id=22&Itemid=68
follow the instructions, and bring me, not stuck in tricolor mode instead stuck in white mode. so i enter bootloader using special key. upgrade rom using romutility from computer, but at this step i got stuck again in progress (just 1% progress is pass). hmm then i try to update ROM via SD
and woaaah, it works. i got bring my D810 to alive again
thanks for all tools in here. it's all great tools
btw i think that in my mind, i still can't revert my HardSSPL, i want to revert to olipro 1.1, right now i use olipro 1.2. i have trying to reflash but it won't work.
Hey, that's another problem, another story. For now i just leave as it is and enjoying for several time. i really miss my D810. Someday i will try again to revert/change hardsspl
thanks all

johnyq said:
that one thing that i have not try and i just try this now, using splxploit
http://trinityguides.info/index.php?option=com_content&task=view&id=22&Itemid=68
follow the instructions, and bring me, not stuck in tricolor mode instead stuck in white mode. so i enter bootloader using special key. upgrade rom using romutility from computer, but at this step i got stuck again in progress (just 1% progress is pass). hmm then i try to update ROM via SD
and woaaah, it works. i got bring my D810 to alive again
thanks for all tools in here. it's all great tools
btw i think that in my mind, i still can't revert my HardSSPL, i want to revert to olipro 1.1, right now i use olipro 1.2. i have trying to reflash but it won't work.
Hey, that's another problem, another story. For now i just leave as it is and enjoying for several time. i really miss my D810. Someday i will try again to revert/change hardsspl
thanks all
Click to expand...
Click to collapse
Why don't you flash back to original rom....than install spl and follow by yor selected rom.
Mine P3600i was down for quite sometime.................I used splxploit ...works.

[Q] [HELP] Tried to flash thorugh usb not working. PLEASE HELP

So..i finally got mtty working. I don't really know how but i got it working despite the code 10 error while installing.But i decided to install the rom thorugh custom RUU after the task 29 format. So i did everything the mtty tutorial said but now, i can't flash the custom ruu.Whenever I try, it gives me 240 error. I cannot access my internal storage, activesync will not recognize my phone. I cannot boot into anything it gets blocked at the Touch Diamond screen. Did a hard reset..nothing worked. Please help me with a solution! i just want to flash a rom onto it so i can use it. Momentarily I can't do nothing with it...

EDIT : GOT IT! I had to reinstall the official rom back. after that everything back to normal.

[Q] I believe I have successfully 100% bricked the G2

EDIT: Wish I could delete this. Just found a post about how to fix this...but it involves opening the phone and messing with the hardware. Wish someone could walk me through it :s
So, I hope I didn't, but here is the scenario:
Wanted to install Lollipop ROM from KitKat...tried, failed, found out I needed to have a downgraded radio. Okay...use LG Flash Tool to give myself another try. Load up Jellybean...couldn't figure out how to flash custom recovery in Jellybean as all tutorials are outdated or just didn't work when I tried them, so I thought the best way to do it was to get the Kitkat OTA from Verizon and let it install, then flash a custom recovery (since I figured out how to do that with Kitkat...Autorec), then flash the old radio then the Lollipop ROM and voilà. However, when waiting for the download for Verizon OTA, I tried again to install a custom recovery, and when tried to load it, I just got a black screen. So I just decided to go back into the Android OS and install the OTA once it finished downloading...
The OTA finished downloading and I clicked install, my phone then rebooted...and stupid me didn't even realise what I have just done. The OTA tried going to recovery mode to install...but there's nothing there. Now I am stuck at a black screen that is trying to start recovery mode and when trying to reboot and get into download mode, it won't let me and just goes to the broken recovery mode.
So...can't really think of any other options for me. What can I do? When I plug it into my computer, it connects my phone as like 20 different drive letters that all say they need to be formatted.
So my question is...what can I do?

Honor 5C - Soft Brick / Hard Brick - HELP??!!??

Hi, well it looks like i have probably hard bricked my phone. After updating to nougat i decided to do afresh clean install. I wanted my phone to as if i had just bought it and came with nougat/emui 5 installed. So i did a factory reset from within the settings menu. But then i thought i would completely erase everything and start from the latest build before nougat, so emui 4.1.2/ marshmallow. So after wiping all the partitions in twrp and then doing a volume up + power to do complete factory wipe followed by using the three button method to install the B130 UPDATE.APP in dload folder on my sdcard, all worked as expected. The update completed at 100% and then rebooted. So there i am waiting for my phone to boot to start the setup process as i have done dozens of times before...BUT...my phone will not boot to the initial setup wizard. It just stays stuck on the Honor logo pulsing animation for ever and ever and ever!!!!!!
So i do the volume up + power button to get to stock recovery and do factory wipe and cache wipe as well. It works as expected so i reboot and once again use the 3 button method to install the update.app on my sdcard. That works as expected and at 100% says its succeeded and reboots. Once again i wait for it to boot to the initial setup wizard but....ALAS...it stays on that DAMN pulsing Honor logo. Ive tried rebooting it several times, redoing the factory wipe and install several times, but nothing. Ive gone into fastboot mode (volume down + power) to try and flash the boot.img and system.img ive extracted from update.app but get the error message -- remote: command failed -- and the same if i try to unlock bootloader. Obviously its not going to work because my bootloader isnt unlocked and nor can i got in to developer settings to enable oem unlock and turn USB debugging on because my phone wont boot past that bloody honor logo.
The only thing i havent done yet is to use eRecovery but i dont have broadband and i doesnt seem to work over public wifi! So i will go to my friends tomorrow and use their broadband and hopefullly eRecovery will download/restore the latest firmware. The only other thing i can think of is to download the original nem-l51c432B102 that came with my phone when bought, extract the update.app file and replace the B130 i have on my sdcard dload folder at present.
Sorry for such a long post but i wanted to expalin evrything in detail to hopefully resolve my problem without going backwards and forwards with questions and answers and taking for ever.
So ANYONE and EVERYONE who managed to read the whole post, if you have even the slightest idea of how to get my phone working, please oh please share it with me. Also my phone is still under warranty so if i needed to send it to a huawei centre to get it fixed would they do it and do it for free??? because eseentialy all i did was a factory wipe/reset and install a frmware and it goes KAPUT!! thats not my fault right????!!???
Thank you to one and all for any wisdom you can share.

please...please....help
So sorry for my original long post people, i simply wanted to give as much detail and info as possible because being vague doesnt help anyone. It seems that might have worked against me.
Please,please any suggestions would be appreciated to the N'th degree! I have tried everything i can think of and i am truly desperate now. I dont understand why i cant get it to work...
I can go into stock recovery and wipe the cach and do factory reset and that works fine, no errors.
I can hold the 3 buttons down to install the firmware package(ive got update.app from B130 build) and that works fine, gets to 100% and says 'success' and then reboots, with no errors.
But either way the phone refuses to boot past the honor logo boot animation and ive left it for hours hoping,praying, it will work after the 32nd time...
I can access fastboot but that is useless because my bootloader is not unlocked and i cant get to developer options to enable 'usb debugging' and 'oem unlock'. So i just get error message 'remote: Command Failed' with any command i type.
But thats madness, i cant comprehend why it wont boot because everything seems to work!?!
There has to be a way to get my device functioning again.
I am pulling my hair out, i am at a complete loss, it doesn't make sense. PLEASE ANYONE ..... please help....
Thanks HONOR-able enthusiasts for any help, no matter how small!

iantechie1979 said:
So sorry for my original long post people, i simply wanted to give as much detail and info as possible because being vague doesnt help anyone. It seems that might have worked against me.
Please,please any suggestions would be appreciated to the N'th degree! I have tried everything i can think of and i am truly desperate now. I dont understand why i cant get it to work...
I can go into stock recovery and wipe the cach and do factory reset and that works fine, no errors.
I can hold the 3 buttons down to install the firmware package(ive got update.app from B130 build) and that works fine, gets to 100% and says 'success' and then reboots, with no errors.
But either way the phone refuses to boot past the honor logo boot animation and ive left it for hours hoping,praying, it will work after the 32nd time...
I can access fastboot but that is useless because my bootloader is not unlocked and i cant get to developer options to enable 'usb debugging' and 'oem unlock'. So i just get error message 'remote: Command Failed' with any command i type.
But thats madness, i cant comprehend why it wont boot because everything seems to work!?!
There has to be a way to get my device functioning again.
I am pulling my hair out, i am at a complete loss, it doesn't make sense. PLEASE ANYONE ..... please help....
Thanks HONOR-able enthusiasts for any help, no matter how small!
Click to expand...
Click to collapse
i guess you are trying to update with the small sized ota b130. Use the full Ota b130 instead

Cienight said:
i guess you are trying to update with the small sized ota b130. Use the full Ota b130 instead
Click to expand...
Click to collapse
I wish my friend. No it is the update.app from the full b130 update.zip. Anyhow I have downloaded the b102, the earliest version I can find and the b130 rollback from nougat to MM version. Gonna extract the update.app from both and try one after the other to install via 3button method. I am just waitingfor my Bro to lend me his laptop so I can copy the files on to my sd card. So wish me luck, he's just come round. I'll know in a couple of hours if it works

It's all gonna be fine

Rog phone 2 stuck on a bootloop without ever trying to install a custom rom

I have my rog 2 stuck in a bootloop. I don't really know why in the first place, because I don't like to change and mess around with custom roms. So i've never done that.
The case was that I was watching a video on YouTube and suddenly the touch screen stopped responding, the phone kept responding to other inputs such as the power button and the volume rocker. So I decided to restart the phone. And then it didn't turn on again. Got stuck in a boot loop.
I've been trying to fix it for a long time. But I just can't do it. Nor am I able to see what is happening with the phone. I have used this guide.
EVERYTHING works perfectly, it doesn't give me any errors during flashing or anything like that. Even the program tells me that the rom has been flashed correctly, and even the rog logo during boot, changes (I suppose because it is a version of the rom prior to the one I had.). The fact is that even with that the phone is still stuck in the bootloop. I have tried more things but this is the one that has taken me the furthest. I don't know what else to try. If anyone has any ideas, please tell me.
P.D. Sorry if my English is a bit rusty.

go back to stock and try other rom.

atoyu said:
go back to stock and try other rom.
Click to expand...
Click to collapse
Any suggestions which rom I can use? I have tried the rom of the guide and the ones that Asus has on their website. None of them have bailed me out.

@Arnau17 Any Updates? I am facing the same issue. Mine reaches till boot logo and then freezes and reboots again. Tried flashing stock ROM as well but no Luck

I am in the same situation, tried several raw rom files, still in bootloop

USB plug correctly on side USB port? can you enter recovery or fastboot mode?
i have same problems before, if fixed after flash RAW rom, hope this help.

is there a guide to fix AVB VERIFY FAIL on Rog Phone 2