Crash flashing BREEZE. Boot is working. Help me pls. - HTC Breeze

Hi, I flashing my friends Mteor from ROM 5.2.19593 (Build 19593.1.1.7) 1.038 to 1.044 and flashing crashed. Now working only switch to boot loader. I checked flash more rom from SD card, but finished on NOT ALLOW. It's problem nocompatibile SPL.
Now is boot with version
BREE100 IPL-1.0
BREE100 SPL-1.10.0000
I have second Breeze with working ROM 5.2.19593 (Build 19593.1.1.7) 1.044
Can you help me:
I need find new ROM compatibilite with SSPL-1.10.0000
or some program or some way for switch to SSPL-7.77 from SD_card or PC
or some way from full backup form my Mteor anf restore to second Mteor.
Can i use program and adress from HTC Wing? I don't know prosses for restore it.
REM This creates a backup of your current SPL
mkdir 1
REM cecopy SurrealNetworksAppUnlock.cab dev:\
REM prun SurrealNetworksAppUnlock.cab
pmemdump -a 0x8C000000 0x40000 1\spl-backup.nb
echo "spl-backup.nb written to subdirectory 1"
pause "press return to exit"

REPAIRED
It's possiblle flashing SSPL 1.10.000 by Russia original flash QTEK_A07 from http://wiki.xda-developers.com/index.php?pagename=Breeze_Upgrades
next time i flashed hardSPL 7.77
next time i flashed new ROM from.

Related

unable to upgrade ROM EDIT: Problem Solved (close)

I have Qtek 9100 unlocked device w/ ROM 2.18.7.7 Ger (German ROM).
Been trying to upgrade to Molski's 2.26.10.2 (http://forum.xda-developers.com/showthread.php?t=286988) and the Superrom v 1.1 by ppctuning.org (http://forum.xda-developers.com/showthread.php?t=288074). However nothing changed and it still says I got the 2.18.7.7 ROM (the extended ROM changed after installing Molski's ROM though).
Do I have to downgrade first? Any other suggestions?
thx a lot,
Alex
edit: When trying to upgrade, the upgrader does not recognize the actual ROM before starting the upgrade. It says:
Model ID: Wizard
Image Version: 1.2.0.0
Language: English
Edit2: Problem solved after I did following (guide by Molski):
Use this method when having problems with upgrading:
1. Downgrade to the 1.05 Rom ( ftp://xda:[email protected]_11210_WWE.exe )
2. Download Lokiwiz 0.2b and extract it to the root of one of your drives, I'm using E: today on my Thinkpad.
3. Copy enablerapi.dll to your device with ActiveSync (don't create a partnership yet, explore as Guest), I just copy to it's root.
4. Execute enablerapi.dll from your device.
5. Open a Command prompt (<Start> <Run> type "cmd" without the quotes and hit <Enter>
6. Go to the root of whatever drive you extracted Lokiwiz to, my case I type "E:" <Enter>
7. Type "U" <Enter> .. wait and you device WILL soft reset. If it doesn't then you're not following instructions!
8. Stay at the Command Prompt!
9. Run Lokiwiz a second time and type "C" <Enter. Your device will reset a second time... if it doesn't you didn't follow instructions.
10. Exit the Command prompt
11. Downgrade to the 1.05 a SECOND time. Upon reboot, if you followed procedure, you will have a IPL and SPL of 1.x

how to create a os sdimg to update?

when i try to create a os sdimage from os.nb by using typhoonnbfdecode.pl,something is wrong. the program displays as:
read 03900000 for os from 04e3d4c0-OS.nb
no ECEC at 0x40 in OS image
how can i make the os sdimage?
The mini USB of my O2 miniS is damaged by the recharger,so the only way to update is from the miniSD.
I find that the typhoonnbfdecode.pl can make the sdimage for wiszard,so i install perl,and nbfutils.
when i try to create a spl sd image,i succeed.
the cmd is : perl typhoonnbfdecode.pl -r spl.nb -d sdimage
but when i try to create a os sd image from the os of O2 wm5 2.21.4.101 ,it displayed as :
read 03900000 for os from 04e3d4c0-OS.nb
no ECEC at 0x40 in OS image
what's wrong?
How can i create a Os sd image?
i have a damaged usb and i want to change the rom using the sd too
i hope someone helps us
i will try to find stuff too.

why can I install radio please, but Roms yes ?

hello and sorry for my bad English because I'm French.
Excuse me if my application you bored but I would simply like to improve radio reception with Radio 1.10.25.18 that seems better than what you offer and where I work, I barely get the signal.
I bought it released all operators.
I realized that my seller had purchased from the operator SFR and he has certainly made available for all operators to sell because his bill comes from SFR.
I can not install the Radio 1.10.25.18 with X1_RUU_Radio_UpdateUtility.
my X1 is released to all operators.
I use it with the operator Orange.
when I started the flash to install the new radio after synchronization total NETFramework 3.5 installed,
I have the following information in the PC:
IMAGE VERSION: 1.02.933.3
UPDATE TO: 1.00.000.0
I click to start operation
on GSM, the screen goes black, and 3 colors with which all this appears:
KOVS110
KPL-0.72 Olinex
MicroP1-707
MicroP2-707
then the screen goes gray with these instructions:
loading ...
NO IMAGE FILE!
then again with 3 colors:
KOVS110
KPL-0.72 Olinex
MicroP1-707
MicroP2-707
and then the gray panel with the update that begins and always fails to 5% growth and re gsm starts as if nothing had been attempted.
on my PC, I have the following information:
ERROR 244: INVALID MODEL ID
This utility can not be used for you PDA Phone.
Please check you Update utility
N-KPXV5667-S-RBRK./01 *
I have operate hard spl utility before, 100% ok
can you confirm that my problem is that it is not supercid and if so, could you help me?
thank you in advance
1- Be sure your phone ir > 50% battery charge (100% recommended)
2- Remove the SD card from the phone
3- Rename the radio file to KOVSimg.nbh and be sure to copy the radio file into THE SAME FOLDER where the RUU radio update utility exe is located
4- Be sure you put ONLY ONE *.nbh file into the RUU folder
PLAN B: Temporarily set your Windows PC to ENGLISH in
-> "control panel" -> "Region and Language configuration"
PLAN C: Use the micro SD card flashing method instead of the "RUU from PC" method
thank you gtrab, I try it !!
yes the "no image file" is because the x1 in bootloader (tricolour screen) is searching the SDcard for the KOVSimg.nbh file.
- Be sure your phone ir > 50% battery charge (100% recommended)
I have wait to get 80% into battery before trying
2- Remove the SD card from the phone
ok
3- Rename the radio file to KOVSimg.nbh and be sure to copy the radio file into THE SAME FOLDER where the RUU radio update utility exe is located
I have rename : this radio name "DIAMING.nbh" in "KOVSimg.nbh"
I have use : Radio v1.10.25.18 (Xperia)(52.56.25.29H) (SU) (Quad Band)
ligne n°3 : http://forum.xda-developers.com/showthread.php?t=470306
4- Be sure you put ONLY ONE *.nbh file into the RUU folder
only KOVSimg.nbh inside
I obtain only this result :
when I started the flash to install the new radio after synchronization total NETFramework 3.5 installed,
I have the following information in the PC:
IMAGE VERSION: 1.02.933.3
UPDATE TO: 1.00.000.0
I click to start operation
on GSM, the screen goes black, and 3 colors with which all this appears:
KOVS110
KPL-0.72 Olinex
MicroP1-787
MicroP2-707
finish to get this message :
loading ...
NO IMAGE FILE!
and then the gray panel with the update that begins and always fails to 4% growth and re gsm starts as if nothing had been attempted.
on my PC, I have the following information:
ERROR 244: INVALID MODEL ID
This utility can not be used for you PDA Phone.
Please check you Update utility
N-KPXV5667-S-RBRK./01 *
after :
PLAN B: Temporarily set your Windows PC to ENGLISH in
-> "control panel" -> "Region and Language configuration"
I try it, the same result
PLAN C: Use the micro SD card flashing method instead of the "RUU from PC" method
can you inform me please better about this method ?
thank a lot !
__________________
Couguy said:
..."DIAMING.nbh" in "KOVSimg.nbh"
I have use : Radio v1.10.25.18 (Xperia)(52.56.25.29H) (SU) (Quad Band)
ligne n°3 : http://forum.xda-developers.com/showthread.php?t=470306
Click to expand...
Click to collapse
LOL
That's a DIAMOND RADIO !!
Not suitable for Xperia X1 !!
You need to hex-edit the radio to make it compatible with Xperia X1
You can download some radios already hex-edited for Xperia X1 FROM THIS THREAD or you can learn how to hex-edit any radio by yourself CHECKING THE RADIOS THREAD HERE
I wrote a mini-tutorial on how to hex-edit radios HERE, page 9, post 87 from the Radio's thread
ecrivez moi un message privé si vous avez besoin de plus aide
thanks, I send you a MP
I close this post and a big tanks to gtrab for the superb help !!!!
all is good now with this :
I downloaded the file ONLY into this post :
http://forum.xda-developers.com/showthread.php?t=466404
there are others post where there are possibility to download radio special Xpéria but at the end, there are not the same and my problem com from all these others links !
I renamed as indicated
I removed the memory card.
I launched the operation and OK.
if you get this like me at firt:
transfert 99% and error 262, wait 100% about battery and retry !
thank you
Removed the SD card and OK.
gtrab said:
1- Be sure your phone ir > 50% battery charge (100% recommended)
2- Remove the SD card from the phone
3- Rename the radio file to KOVSimg.nbh and be sure to copy the radio file into THE SAME FOLDER where the RUU radio update utility exe is located
4- Be sure you put ONLY ONE *.nbh file into the RUU folder
PLAN B: Temporarily set your Windows PC to ENGLISH in
-> "control panel" -> "Region and Language configuration"
PLAN C: Use the micro SD card flashing method instead of the "RUU from PC" method
Click to expand...
Click to collapse
Same problem. Removed the SD card and OK.
Thanks...

750 Dead after flashing with wrong OS

Hi everyone,
I have a big problem and I need urgent help please. I have ATT 750 unlocked and I'm outside the States now. My Treo was 6.0 then I upgrade it to 6.1 so far so good.
Then I saw a custom rom that I thought it was interesting. the custom rom was for HTC Dimond I think. without paying too much attention. I started the upgrade. It went 70% before the upgrade crashed.
Now my Treo is not responding to anything. I have the original ATT 6.0 SD upgrade and I have the 6.1 lite upgrade. I'm using CheetahUnlocker to flash the SPL (that is working) but when I try to install the 6.0 or 6.1 using Kaiser Custom RUU v1 it crash.
I saw an earlier post that suggest to place the original 6.0 on a freshly formatted SD and install from there. that is not working either. when I try to install the software it goes into these steps before it crashes: btw, I have the tri-color bar and it has the following info:
CHEE100
IPL-0.20
SPL-1.40.01iNex
while update in progress i see the following:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - Fail
OS -
After the crash I get this msg: "Update Terminate Update Failed"
Any suggestion please? need more info? then let me know
Thanks in advance
Sam
Someone please help.... I'm sure someone has some suggestions.
By the way, I've tried RUUwrapper and that didn't help either.
Thanks in advance
I've got the same problem and finally I can solve my problem.
The procedure :
1. Open mtty and by connection via usb, just do :
Command mtty:
- task 2a
- flash:
[1- press enter
2 - type "set 14 0"
3 - type "task 28 55aa"]
you shoul see now the program runing a lot of things that I don`t remember what...
then when it ends try the SD instal...
If It still doesn`t work then:
[1- press enter
2- "erase"
3- "checksum"
4- "checkimage"
5- "task 0"]
then reflash your radio & OS by SDCARD...
- set 16 0 0
- info 7
- info 8
2. It means your PDA has no ROM OS and Radio.
3. Copy CHEEIMG.nbh (ROM OS) to formatted SD Card.
4. Insert the SD Card to PDA and just install by push the 3rd side button together with soft reset (by stylus).
5. Replace file CHEEIMG.nbh (ROM OS) with CHEEIMG.nbh of Radio.
6. Do same procedure as number 4.

SPL don't change from Olinex1.93 to 1.40

Hello xda user's,
i have a realy special problem.
I flashed the Olinex 1.93 on my HTC Diamond with T-Mobile branding.
After flash from SPL, the HTC don't boot os does not matter HTC Diamond or T-Mobile original software.
Picures from Bootscreen, please change ++ to tt, thanks.
h++p://img94.imageshack.us/img94/1484/13397282.jpg
h++p://img297.imageshack.us/img297/9091/71541716.jpg
The OS boot and at once reboot after os screen again..again....
Now, i want change Olinex 1.93 to 1.40, unfortunately unsuccessful.
I tried with mtty.
Cmd>task 29
Format BINFS start
Fill RSVD information for block 288 to 321
CE start sector=0x14, total sector of CE and TFAT=0x14
CE start start block=321, total block=1727
Write 0xFF start page=0x5040, total page=0x1AFC0
Format BINFS end
Cmd>task 8
The Onlinex 1.93 don't change.
You are my last hope to solve this problem and exuse me my horrible english.
1.93 is the best SPL,why want you to change?
My MDA can not boot the os. And it always reboot again.

Categories

Resources