Hello xda user's,
i have a realy special problem.
I flashed the Olinex 1.93 on my HTC Diamond with T-Mobile branding.
After flash from SPL, the HTC don't boot os does not matter HTC Diamond or T-Mobile original software.
Picures from Bootscreen, please change ++ to tt, thanks.
h++p://img94.imageshack.us/img94/1484/13397282.jpg
h++p://img297.imageshack.us/img297/9091/71541716.jpg
The OS boot and at once reboot after os screen again..again....
Now, i want change Olinex 1.93 to 1.40, unfortunately unsuccessful.
I tried with mtty.
Cmd>task 29
Format BINFS start
Fill RSVD information for block 288 to 321
CE start sector=0x14, total sector of CE and TFAT=0x14
CE start start block=321, total block=1727
Write 0xFF start page=0x5040, total page=0x1AFC0
Format BINFS end
Cmd>task 8
The Onlinex 1.93 don't change.
You are my last hope to solve this problem and exuse me my horrible english.
1.93 is the best SPL,why want you to change?
My MDA can not boot the os. And it always reboot again.
Related
Hi, I flashing my friends Mteor from ROM 5.2.19593 (Build 19593.1.1.7) 1.038 to 1.044 and flashing crashed. Now working only switch to boot loader. I checked flash more rom from SD card, but finished on NOT ALLOW. It's problem nocompatibile SPL.
Now is boot with version
BREE100 IPL-1.0
BREE100 SPL-1.10.0000
I have second Breeze with working ROM 5.2.19593 (Build 19593.1.1.7) 1.044
Can you help me:
I need find new ROM compatibilite with SSPL-1.10.0000
or some program or some way for switch to SSPL-7.77 from SD_card or PC
or some way from full backup form my Mteor anf restore to second Mteor.
Can i use program and adress from HTC Wing? I don't know prosses for restore it.
REM This creates a backup of your current SPL
mkdir 1
REM cecopy SurrealNetworksAppUnlock.cab dev:\
REM prun SurrealNetworksAppUnlock.cab
pmemdump -a 0x8C000000 0x40000 1\spl-backup.nb
echo "spl-backup.nb written to subdirectory 1"
pause "press return to exit"
REPAIRED
It's possiblle flashing SSPL 1.10.000 by Russia original flash QTEK_A07 from http://wiki.xda-developers.com/index.php?pagename=Breeze_Upgrades
next time i flashed hardSPL 7.77
next time i flashed new ROM from.
Hi everyone,
I have a big problem and I need urgent help please. I have ATT 750 unlocked and I'm outside the States now. My Treo was 6.0 then I upgrade it to 6.1 so far so good.
Then I saw a custom rom that I thought it was interesting. the custom rom was for HTC Dimond I think. without paying too much attention. I started the upgrade. It went 70% before the upgrade crashed.
Now my Treo is not responding to anything. I have the original ATT 6.0 SD upgrade and I have the 6.1 lite upgrade. I'm using CheetahUnlocker to flash the SPL (that is working) but when I try to install the 6.0 or 6.1 using Kaiser Custom RUU v1 it crash.
I saw an earlier post that suggest to place the original 6.0 on a freshly formatted SD and install from there. that is not working either. when I try to install the software it goes into these steps before it crashes: btw, I have the tri-color bar and it has the following info:
CHEE100
IPL-0.20
SPL-1.40.01iNex
while update in progress i see the following:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - Fail
OS -
After the crash I get this msg: "Update Terminate Update Failed"
Any suggestion please? need more info? then let me know
Thanks in advance
Sam
Someone please help.... I'm sure someone has some suggestions.
By the way, I've tried RUUwrapper and that didn't help either.
Thanks in advance
I've got the same problem and finally I can solve my problem.
The procedure :
1. Open mtty and by connection via usb, just do :
Command mtty:
- task 2a
- flash:
[1- press enter
2 - type "set 14 0"
3 - type "task 28 55aa"]
you shoul see now the program runing a lot of things that I don`t remember what...
then when it ends try the SD instal...
If It still doesn`t work then:
[1- press enter
2- "erase"
3- "checksum"
4- "checkimage"
5- "task 0"]
then reflash your radio & OS by SDCARD...
- set 16 0 0
- info 7
- info 8
2. It means your PDA has no ROM OS and Radio.
3. Copy CHEEIMG.nbh (ROM OS) to formatted SD Card.
4. Insert the SD Card to PDA and just install by push the 3rd side button together with soft reset (by stylus).
5. Replace file CHEEIMG.nbh (ROM OS) with CHEEIMG.nbh of Radio.
6. Do same procedure as number 4.
Since people are starting to have problems with their SEX1, I think its gonna be usefull to have this thread as a reference for fixing bad flashs and corrupted memory.
The method to connect with MTTY are the same for all phones so please refer to this thread to PREPARE your computer :
HTML:
http://forum.xda-developers.com/showthread.php?t=540290
However, the commands for the xperia are slightly different.
Once your in MTTY and Connected :
Press enter first to get prompt (Will Show as CMD)
---------------------
MTTY OUTPUT:
---------------------
CMD>
---------------------
type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
---------------------
MTTY OUTPUT:
---------------------
CMD>set 14 0
HTCST ÚÈHTCEUSB>
---------------------
type "task 28 55aa" to get your device formatted:
---------------------
MTTY OUTPUT:
---------------------
Cmd>task 29
Format BINFS start
Fill RSVD information for block 288 to 321 YOU WONT SEE THIS LINE IF YOU JUST TYPED TASK 28. YOU MUST TYPE TASK 28 55aa OR IT WONT ERASE EVERYTHING.
CE start sector=0x14, total sector of CE and TFAT=0x14
CE start start block=321, total block=1727
ERASE block 1337 FAIL !!!
Write 0xFF start page=0x5040, total page=0x1AFC0
Format BINFS end This part is just copied from the diamond thread so it might be a lil different with xperia. The important thing is to see the FILL RSVD line.
Cmd>
---------------------
type "task 8" to ask your device reboot:
---------------------
MTTY OUTPUT:
---------------------
Cmd>task 8
Cmd>
---------------------
Immediately DISCONNECT your phone
et voila!
If somebody know how to extract info's from the xperia bootloader, maybe we can know what other tasks could be usefull.
I think this should work for most people.
maybe you can also provide working mtty software and usb driver? thanks for the thread.
This should be sticky!
Thanks for writing the info, it is very good.
The working drivers are in the thread that is linked to in the first post!
http://forum.xda-developers.com/showthread.php?t=540290
You MUST flash a Stock ROM after this process! (i think, flashing a custom ROM failed for me)
help!! to bootloader mode
when im trying to enter bootloader mode it detects kovsimg.nbh(any rom that has been copied to root of the card) ...it asks "Press power button to start update image"
how can i stay at tricolor mode to run mtty? shouldn't i copy kovsimg.nbh to root of the card? help
remove your card
done
Jonny4911 said:
You MUST flash a Stock ROM after this process! (i think, flashing a custom ROM failed for me)
Click to expand...
Click to collapse
You don't have to flash a stock rom.
Flashing a custom rom will also work. It will just format your phone and after that rewrite the flash so doesn't matter if it's a stock or custom rom
Jonny4911 said:
remove your card
done
Click to expand...
Click to collapse
thank you..did it..successful
i can see fill rsvd after type 2855aa
i can see nothing after type task 29
and the system still exists after mtty
what problem ?
simpleguy said:
i can see fill rsvd after type 2855aa
i can see nothing after type task 29
and the system still exists after mtty
what problem ?
Click to expand...
Click to collapse
There is no problem.
The system will reinstall itself but any remaining information ( bad sectors ) from previous flash will be remove.
Your rom wont have any problems.
NOTE : Task 29 is NOT for XPERIA
after disconnect ????
all run ok with me
but what i should do after disconnect my phone, how can i do these step
((7: Immediately DISCONNECT your device and hold "Vol Down and Back" (Back = Small Arrow above "End Call" Button) to Initiate ROM Flash
8: After ROM flash Hard-reset (Pen Reset, then Press and Hold Vol Down and Circle) again, on completion "Press Vol Up To Boot" Is displayed, press "Vol Up" and allow the ROM to boot.))
thank you 8)
Hello
i have a TD2 (r - 4.49.25.91 / d - LouMeiYin D) and it freezes before booting (when the radio and rom are shown at the bottom in red). I tried soft reset (it doesn't work), hard reseting, changing rom to stock and the back, and tried several radios (all these changes work but doesn't solve the problem). When it freezes i can't turn it off from the power button but need to remove the battery. Tried starting it without a sim and still doesn't work.
The phone shut down by its own and can't turn it on since.
Any advice would be welcome,sorry for the bad english.
Thank you
You may have a bad ROM file, try downloading again and reflash.
Also, make sure to remove SD card to eliminate any UC interference.
flashed with Duttys Topaz HG R13 [5.2.23569.5.5.0], still the same problem, stops at touch diamond 2, also flashed with stock rom.
the sd card is out.
cheregi said:
flashed with Duttys Topaz HG R13 [5.2.23569.5.5.0], still the same problem, stops at touch diamond 2, also flashed with stock rom.
the sd card is out.
Click to expand...
Click to collapse
and you've installed HSPL?
i have hard spl 1.83 installed
i've now instaled HSPL 2.51 and i'll flash again
Come to think of it, that probably was your issue.
HSPL 1.83 is only good on slightly older ROMs where 2.51 is current.
2.51 should solve your issue.
it won't boot with stock ROM,
hard reset = (i've pressed the power buttons + VolUp+ VolDown
-recieved "this will delete all your personal data ... press VolUp to restore"
- pressed VolUp - restore ... completed, press volup to boot and still stops at the same screen)
no, flashed Duttys Topaz HG R13 [5.2.23569.5.5.0] with HSPL 2.51 and still the same problem.
i can't figure out why it won't go past this stage...
I gotta go, but look into MTTY to reflash your drive.
Something seems corrupt.
Sorry man.
reflashed with mtty, and still the same problem. i think i'll use it as a brick
"
Cmd>set 14 0
HTCST ÚÈÒHTCE
Cmd>task 29
Format BINFS start
CE start start block=321, total block=3775
ERASE block 2343 FAIL !!!
Write 0xFF start page=0x5040, total page=0x3AFC0
Format BINFS end
Cmd>task 8
"
and also
"
Cmd>task 28 55aa
Format start
Fill RSVD information for block 288 to 321
Storage start sector=0x15800, total sector=0x25240
Storage start block=1409, total block=2377
Total Bad Block in CE: 0
Erase physical block from 1699 to 4096
formatstorage Bad block found: 2631
Format end
Cmd>task 8
"
no ideas anybody?
I'm not sure whats going on but once I hit BOOT in MTTY 1.42 things work. If i need to reboot, then I get stuck at the triloader screen and I need MTTY to boot my phone up... Not a good look at all..lol
When I boot in MTTY i get
Cmd>boot
InitDisplay: Display_Chip=1
Card inserted
Cmd5 CMD_TIMEOUT
SD 2.0 LC card
SD Init OK
SDFATChkConf: RhOpenFile() failed KAISCONF.txt
OSSIReadBack ++
Read SI data from flash success
tail signature match
Checksum match
UserStorageSIPreload ++
and my triloader screen says..
KAIS1*0 MFG
SPL-1.0.01liPof
CPLD-8
Any advice or software or anyone can help me in getting the phone to boot properly without the need of MTTY