[ROM] HTC Shift US-English SnapVue libertated ROM - Shift Development

Hello,
I need HTC Shift US-English SnapVue liberated ROM because the custom ROM come with some bugs as backlight bug, no microphone bug and more.
If anyone can post a rapidshare link or other link then please let me know.
Thanks

deprotector said:
Hello,
I need HTC Shift US-English SnapVue liberated ROM because the custom ROM come with some bugs as backlight bug, no microphone bug and more.
If anyone can post a rapidshare link or other link then please let me know.
Thanks
Click to expand...
Click to collapse
Yes, I also have the problem with all the new cooked ROM here. So I changed back to the original English ROM, I have to liberated from email again, but it is much more stable. However. the original ROM also have the noise sound problem!
GPS is not much useful without the SD card, plesae try help us by uploading a liberated original English ROM without GPS(avoid noise problem)!

Is there any way to find out on Vista side or WM6 side what is the genuine version of SnapVue ROM factory installed? My HTC Shift is US version with US keyboard so I need a SnapVue liberated or not liberated ROM for the HTCH Shift US version. Thanks.

deprotector said:
Hello,
I need HTC Shift US-English SnapVue liberated ROM because the custom ROM come with some bugs as backlight bug, no microphone bug and more.
If anyone can post a rapidshare link or other link then please let me know.
Thanks
Click to expand...
Click to collapse
Try thaihugo's version of ROM WWE1.22, it is much more stable. He did not remove anything, just added liberation and GPS.
Thanks
Ram

ACtually, that means the sound driver is changed too. But I'm still unsure mic was working before. If it is, I might look for a way to make it work again.
My rom is stable because I start from the principle that the stock rom should be changed by light touch only.

thaihugo said:
ACtually, that means the sound driver is changed too. But I'm still unsure mic was working before. If it is, I might look for a way to make it work again.
My rom is stable because I start from the principle that the stock rom should be changed by light touch only.
Click to expand...
Click to collapse
thanks a lot for your effort to make that ROM, I changed back to your ROM.
Actually I don't need GPS because no SD card support. I added 128 dpi, Chinese Font and Opera WM5 to your ROM.
I use the WM6 to surf when not at home.

thaihugo said:
ACtually, that means the sound driver is changed too. But I'm still unsure mic was working before. If it is, I might look for a way to make it work again.
My rom is stable because I start from the principle that the stock rom should be changed by light touch only.
Click to expand...
Click to collapse
Thanks! Can we have a link for your ROM or for the post where we can read about it? Also your ROM come from an HTC Shift US version or what was the default language/keyboard on it?

Also there is any way to know the latest SnapVue ROM version? Any way to find out what SnapVue version was installed in each HTC Shift even after we flashing the SnapVue ROM with custom ROM ?

deprotector said:
Also there is any way to know the latest SnapVue ROM version? Any way to find out what SnapVue version was installed in each HTC Shift even after we flashing the SnapVue ROM with custom ROM ?
Click to expand...
Click to collapse
I think the latest ROM is 1.30.508.0, but you would see 1.30.405.0 more. Those two are not that stable. More Stable one is 1.22.x (Minor version number is not coming out from my mind currently). Thats what thaihugo used and it is WWE, which means US, but you have to tweak cabfile and keybd registry settings before you install anything and use with US keyboard. By default it is set to UK keyboard. Here is the ROM, http://forum.xda-developers.com/showthread.php?t=420548 and don't forget to read page 2, it has the registry tweakings you may have to do.
Good Luck
Ram

I have posted the french version too. This one is 1.30. It is working properly too. Maybe I could try to change language from this version. I wonder the difference between this french 1.30 and the canadian 1.30.

Thaihugo, if I will flash your ROMN on my Shift you haver any ideea if the backlight level and microphone will work again?keep Also I understand that your ROM is UK version but my Shift is US version. I can change the keyboard in registry but this maybe affect other things?

Related

Dumping standard shipped ROM

Is there anyone who has succesfully dumped the Official Shipped ROM that comes with the European models ?
I'm sure that apart from me, there are other members who would like to revert to the offical ROM just in case something happens with the device. (need to send it back for a reparation)
I'm going to flash just right now anyway, as I'm positive that there will be someone in the future dumping the offical ROM.
\cheers, now pressing start
EDIT : After flashing I keep the high pitched noise that almost everyone is Reporting. I can't get rid of it. Be aware with this ROM,. you might get stuck with a hissing device that won't stop I'll wait for some solution and then flash again, can't use Winmo anymore
me too...please help us - i cannot use my device due to constant noising...
up0grading the EC chip drivers
I saw some remarks about the EC Chip driver update from HTC - will try that now, see if it helps anything at all.. For now, the device always hisses like a snake when Vista is active.
Without Vista active, it's mostly quiet, but gives no sound in WinMo, however, if you try to make a sound in WinMo, sometimes, after a few seconds, it will hiss and pitch for the duration of the sample played...
This is really annoying
hi,
i did a backup pof's way, so i have now part00.raw - part04.raw and SPL.nbh.
Rebuild Part02.raw and uploaded again. Working like a charm. Problem is: my original ROM is in German. anyone interested?
german but quiet is much better than english with noise.
please provide links.
Thanks
GERMAN..?
That sounds wonderful: need the the german ROM very urgent, can`t work with my beloved shifty...
Please share the ROM, thanks so much!
Me too!
I installed the GPS Bios pack - Easy BUT:
The noise only appears while staring after reinstalling the battery - just restart SnapVue after Vista is up and the noise is gone.
Also gone is the German keyboard under SnapVue - Regional settings don't change that!
GPS work in SnapVue and Vista (using ActiveSync & GPSgate - after test period ~30€).
Overnight SnapVue need app. double the energy than before!!!
Using GPS in Vista means NO internet/mail!
Wrong keyboard layout and battery drain tempt me to reinstall an original German ROM and to continue using my dear old eTrex with USB together with my Vista progs.
So, how and where2 can I find the German ROM?
Thanks,
Axel
Send the Rom-Link to a victim already. Waiting for an OK before i publish.
Victim report Nr. 1:
@tece: Thanks a lot, man, good job, it works fine..!
Regards and thanks a lot.
Alex
great!!
i noticed that pocketie is already installed and that \Windows\StartUp\PKG.exe and BlockTitleBar.exe are already removed.(like i did as described in this: http://forum.xda-developers.com/showthread.php?t=377441 thread before backing up the original ROM). Now I'm looking to get the registry preconfigured to not start Snapvue. Liberated German ROM will get released this weekend. If you can't stand waiting for that ROM send me or traumrakel a PM for the rapidshare link.
If you could include the liberation into the new ROM I would prise your name... ;-)
and here it is: http://forum.xda-developers.com/showthread.php?t=417901
I have rom dumps of:
- 1.30 WWE
- and whatever rom the CDMA shifts have.
does anyone need either?
cmonex said:
I have rom dumps of:
- 1.30 WWE
- and whatever rom the CDMA shifts have.
does anyone need either?
Click to expand...
Click to collapse
hello cmonex,
i m running the german rom as i do not have my original french dump, i would be very happy to install 1.30 WWE!!
even if tece rom is great in order to learn some german word
cmonex said:
I have rom dumps of:
- 1.30 WWE
- and whatever rom the CDMA shifts have.
does anyone need either?
Click to expand...
Click to collapse
Do you have the reconstructed ROM of version (original UK Shift): 1.30.405.0 WWE ? Can u post it/send it? Then I don't have to rebuild it myself, because I'm not that experienced it rebuilding myself. Also in case my rebuilded rom fails to work.
Many thanks!
cmonex
Could you please share the 1.30WWE
Thanks
Ram
You have it, it's the one having gps and sound bugs with european radios.
I'm using 1.22 because it's a stable base. Later version doesn't give you much, as graphic drivers are disabled anyway.
thaihugo
Cool. I followed pof's suggested way of dumping the original rom. Now I got all the raw files with correct start addresses. I am wondering whether I did correctly or not for SPL.NB. because the file size is 256 KB since I passed the same length 262114 as read in pof's post. When I used KaiserKitchen to reconstruct, I don't have baseRom and if I ignore that, I am not gettting the NBF file. I want to backup my CHT ROM and install your's (1.22 with GPS and sound). Could you please shed some light?
Thanks
Ram
Hi Cmonex ;
I need the non-touched 1.30 WWE rom for shift ; can you share please ?
Safak
Thaihugo , Saiweb
Do you have 130 WWE non-touched original rom ? I ve downloaded one from the forum but it is the "telenav"ed orig one , which i can not use at all...
Can you share if you have ?

How do i get gps working

Just wondering how i enable gps on a newley liberated rom - w/o installing a one of the custom roms with it embeded?
Thanks in adv
Kris
Please,
extract the GPS enabled ROM then copy the needed DLL's extract your rom put HTCGPS tool on it and recook your rom and flash it, i would expect there is no cab done with a one click install for liberated shift, also it would be ver less space to add iGO or such to the shift in a liberated rom.
cmonex did this stuff for the GPS enabld rom, if you have further questions try to ask her and PLEASE read & search the forum FIRST before you write noob questions to her.
Greets
how can i do this - i have extracted the rom but dont know what dlls to replace etc
thanks kris
Very interesting topic, but some inacurate in its name...
Neutron83, I do not undestand this steps too - very dreary, some cookings... Intricately!
I want to enable GPS on native liberated ROM - without reflashing it. Is it possible?
And what is the way to invite attantion ofcmonex to this topic?
cmonex did not provide gps to shift, I did.
I provided a cab for that. Only problem with the cab method is that you lose sound and you must run drivers manually after soft rest.
You cannot have gps and sound with this method, as an important file needs to be replaced for that, and only rom flashing can do this. Uninstalling the cab and soft reseting solves that.
BTW, flashing my rom is the same than liberating the snapvue, and adding gps drivers. Nothing is added or deleted (mostly)
http://forum.xda-developers.com/showthread.php?t=419343
Thanks. Navigation without sound is nonsense.
flashing my rom is the same than liberating the snapvue, and adding gps drivers. Nothing is added or deleted (mostly)
Click to expand...
Click to collapse
Where is this ROM? Is it English only?
english and french. Please do a search in this subforum for posts started by me.
You wrote (about NewYear) about LITE-rom, but I find French only. Is English avaiable?
Nope, but I might do one soon, when we have mic working as well as phone.
Is there a special version of the shift to use ?
Mine is french and i remember that not all shift have gps.
How can i verify my version ? and what version have gps functional ?
to verify your version, you can remove the battery and look near the sim card "clio***"
I think that all the shift are GPS'able.. but correct me if I'm wrong !
Mine is a clio110.
I will search in the forum for confirmation for the gps and post here if i find it.
Please tell me if you find before me.
Here is the post :
http://forum.xda-developers.com/showthread.php?p=3041810&highlight=clio110#post3041810
But it's not really clear about it...
koala996 said:
I think that all the shift are GPS'able.. but correct me if I'm wrong !
Click to expand...
Click to collapse
That is also my understanding.
You just have to flash a rom that enables the gps receiver.
bosjo said:
That is also my understanding.
You just have to flash a rom that enables the gps receiver.
Click to expand...
Click to collapse
So is there any step i missed to activate it after i installed the ROM ?
bosjo said:
That is also my understanding.
You just have to flash a rom that enables the gps receiver.
Click to expand...
Click to collapse
yeah almost sure about it.
from internet explore in Windows Mobile; go to maps.google.com/gmm and download google maps for PPC.
Does it work?
hexagram said:
So is there any step i missed to activate it after i installed the ROM ?
Click to expand...
Click to collapse
i have the same shift as yours and mine works... then yes.. you should have missed something or you don't know how to check if gps is working.
I'm using the rom of cmonex (1.29) and it's working perfect.... try to use the HTC GPS Tools to see if you get NMEA.

Rogers Name Display

After a lot of efforts by a lot of people in the Raphael, i want to send a special thanks to Captain_Throwback
I sent him the rilphone.dll used in the diamond Rogers ROM to enable Name Display on my Diamond using Dutty's ROM v.4
With his knowledge he was able to cook a cab with the proper settings to enable name display without having to cook it directly in the rom.
Thats fantastic!
Please post your experience and what ROM you used this on.
I guess I will be the first to test this on 6.5.....
UPDATE:
One word....Brilliant
Thank you so much. I had this when we were in the 1.93 ROM days but then lost compatiblity with the newer ROMS.
This Restored it back...GREAT
Thanks for sharing D0MZE and thanks to Captain_Throwback.
Do I need to be running the original Rogers 1.00.25.06 radio too? Hesitant to try...tried a couple months ago using another method...didn't work and had to hard reset...
chgrbt said:
Thanks for sharing D0MZE and thanks to Captain_Throwback.
Do I need to be running the original Rogers 1.00.25.06 radio too? Hesitant to try...tried a couple months ago using another method...didn't work and had to hard reset...
Click to expand...
Click to collapse
Same thing for me! I'm a using HTC stock ROM with the original radio and I already tried something in the past and the radio stop to work, I had to hard reset.
MikaelG said:
Same thing for me! I'm a using HTC stock ROM with the original radio and I already tried something in the past and the radio stop to work, I had to hard reset.
Click to expand...
Click to collapse
On another "Rogers" thread, it was pointed out to me that this solution would only work if my "ROM has been patched to supported unsigned drivers", which is something I don't know.
See the thread:
http://forum.xda-developers.com/showthread.php?t=347882&page=33
I am actually not using the stock radio rom provided by rogers.
I updated my radio rom to 1.09.25.23
I'm not sure if Dutty in his rom has set the setting for unsigned drivers.
As far as I know, this worked, and was only on a software basis... I've been following the other thread about the raphael and it seems Captain_Throwback only did changed/added some Registry settings to make it work.
On that note, the rilphone.dll was taken out directly out of rogers original rom (the rom that came with the phone)
Does this not work with Duttys 5.2.20764.1.4.3_V4_Full_MSVC [2.03]?
I installed it and doesn't seem to do it.
Thanks
can someone getting working for D2 please
jasonchewy said:
Does this not work with Duttys 5.2.20764.1.4.3_V4_Full_MSVC [2.03]?
I installed it and doesn't seem to do it.
Thanks
Click to expand...
Click to collapse
I installed it on Duttys 5.2.20764.1.4.3_V4_Full_MSVC [2.03]
So I don't know? It should in theory work.
or you want to try something like this. You need to have data plan to make it works.
http://www.truecaller.com/
will this work on other htc wm phones; ie tilt on TOC 6.5; or tytn on wm 6.1??
My guess is that no... but if you're willing to try.. the worst thing that can happen is that you will have to hard reset your phone, but at least if you do try and it works, i mean it can help a lot of people.
a in yul said:
will this work on other htc wm phones; ie tilt on TOC 6.5; or tytn on wm 6.1??
Click to expand...
Click to collapse
Sorry for the late reply, found this page on Google.
Download the Diamond .cab. Installed in on my XPERIA running 6.5. It works
D0MZE said:
After a lot of efforts by a lot of people in the Raphael, i want to send a special thanks to Captain_Throwback
I sent him the rilphone.dll used in the diamond Rogers ROM to enable Name Display on my Diamond using Dutty's ROM v.4
With his knowledge he was able to cook a cab with the proper settings to enable name display without having to cook it directly in the rom.
Thats fantastic!
Please post your experience and what ROM you used this on.
Click to expand...
Click to collapse
Finally! Works perfect although many names have an extra "@" sign lol
CNAP working
D0MZE said:
After a lot of efforts by a lot of people in the Raphael, i want to send a special thanks to Captain_Throwback
I sent him the rilphone.dll used in the diamond Rogers ROM to enable Name Display on my Diamond using Dutty's ROM v.4
With his knowledge he was able to cook a cab with the proper settings to enable name display without having to cook it directly in the rom.
Thats fantastic!
Please post your experience and what ROM you used this on.
Click to expand...
Click to collapse
CNAP on my Diamond with Roger's Wireless network is working for me after installing this rilphone cab. Thank you D0MZE, Captain_Throwback and the other contributors.
I have found that generally after flashing a new radio, I need to re-install the rilphone cab for the caller name to show up in the call history list. Also, I have assumed that in order to keep the Roger's CNAP functionality, I need to stay with this rilphone until Roger's issues a newer version. I also don't really like hard resets so I'm being conservative about flashing. So for now, as I experiment with newer radios, I keep using the rilphone cab provided in this thread.
chgrbt said:
CNAP on my Diamond with Roger's Wireless network is working for me after installing this rilphone cab. Thank you D0MZE, Captain_Throwback and the other contributors.
I have found that generally after flashing a new radio, I need to re-install the rilphone cab for the caller name to show up in the call history list. Also, I have assumed that in order to keep the Roger's CNAP functionality, I need to stay with this rilphone until Roger's issues a newer version. I also don't really like hard resets so I'm being conservative about flashing. So for now, as I experiment with newer radios, I keep using the rilphone cab provided in this thread.
Click to expand...
Click to collapse
You can use diff radios with the CAB, but just that sometimes functions in the radio arent implemented in the rilphone.dll which kinda sucks.
For now it will take time until rogers releases another windows mobile phone, so... my opinion is that we're going to have to wait.
Damn rogers.
Concerning the @ sign, it's normal, it just means that the name is longer than what the phone can take.
Has anyone tried this on a tilt with a custom ROM? Tempted to try this...
D0MZE said:
After a lot of efforts by a lot of people in the Raphael, i want to send a special thanks to Captain_Throwback
I sent him the rilphone.dll used in the diamond Rogers ROM to enable Name Display on my Diamond using Dutty's ROM v.4
With his knowledge he was able to cook a cab with the proper settings to enable name display without having to cook it directly in the rom.
Thats fantastic!
Please post your experience and what ROM you used this on.
Click to expand...
Click to collapse
Thks for the work to all;
Matt1408 said:
Sorry for the late reply, found this page on Google.
Download the Diamond .cab. Installed in on my XPERIA running 6.5. It works
Click to expand...
Click to collapse
Just logged on and checked; thanks a bunch; have it working on my tilt on FIDO..!!
super news..!!
Thanks for all the good work! This not only fixes my caller display problem, it also fixes my SMS timestamp problem! Now all incoming SMS's are correctly timed!!!
Rogers Name Display for WM6.5 HTC HD2
It doesn't work for WM6.5 on my HTC HD2, can somebody share rilphones.dll from WM6.5 Rogers/Fido device with me?

If i install a 6.5 rom can i revert back to 6.1 htc rom?

Just in case i dont like it or am i stuck with cooked roms thereafter?
Yes, Once installed HardSPL, you can put on any rom you wish,
This means, that you can flash Official Roms (Perhaps to change language) or Cooked Roms, As long HardSPL is on your device, you can reflash any Rom that is built for your device
Since HardSPL cannot be removed by flashing a rom (you can remove it with the removal utility) you don't have to worry about Official or Cooked roms ;-)
Hey!
Thanks for such an informative and quick reply!
I'm just thinking about my warranty etc and also whats the best 6.5 to try whilst i have your help?
Does Dutty not do Tpaz roms?
Cheers
jeutie said:
Yes, Once installed HardSPL, you can put on any rom you wish,
This means, that you can flash Official Roms (Perhaps to change language) or Cooked Roms, As long HardSPL is on your device, you can reflash any Rom that is built for your device
Since HardSPL cannot be removed by flashing a rom (you can remove it with the removal utility) you don't have to worry about Official or Cooked roms ;-)
Click to expand...
Click to collapse
W.r.t warranty, if you ever have to send your phone in for repair under warranty, be sure to remove hard SPL with the removal tool first
Thanks mate, whats the 6.5 rom you are running like? is it fast? any benefits?
adesonic said:
W.r.t warranty, if you ever have to send your phone in for repair under warranty, be sure to remove hard SPL with the removal tool first
Click to expand...
Click to collapse
Dutty does not work on the Topaz (yet? xD)
I still use a highly (self) customized stock rom,
If you want to use a 6.5 rom I'd recommend Tom's or udK's roms.
And indeed, if you ever need to return your phone, Try to flash a stock rom & remove HardSPL from your device, and you should be ok ;-)
adigraham said:
Thanks mate, whats the 6.5 rom you are running like? is it fast? any benefits?
Click to expand...
Click to collapse
I am running Tom Codons' latest 6.5 ROM - Biggest benefit to me is that windows media player appears to have more video codecs than before - I can now play vids that would not play on 6.1.
Toms ROM is genreally fast and bug free and he includes a registry editor for your convenience!
Ok great thanks guys!
As HTC dont supply a stock rom are the original rooms on the wiki mirror the same?
adigraham said:
Ok great thanks guys!
As HTC dont supply a stock rom are the original rooms on the wiki mirror the same?
Click to expand...
Click to collapse
The ROM's which names start with RUU... are official ROM's from HTC. The question is if you find the original ROM that is on your TOPAZ right now.
If it is not listed yet, you might not be able to get back to your original status once u flashed a cooked ROM.
A possibility is to dump your original ROM and try to create the files for reflashing it. I never tried by myself, but I see in the threads of "TOPAZ ROM development" that it is not that easy.
At the end it's your decision to accept the risk.
Great thanks!
Well im flashing with Toms 6.5 rom and yeah i have hardspled
Cheers guys!
oh and i have a tomtom 7 version, what sat nav you all preferring? need to get an 'extended' version ideally to play with
I had some voice problems with tomtom, So I use iGo8
what did that cost ya?
Not that much *rolling eye's*
Although tomtom is fine with the fix...
Go with Garmin GMXT just google for the K*y Gen and procedures.
Looks like garmin dont like built in gps? at least not what i tried!
adigraham said:
Looks like garmin dont like built in gps? at least not what i tried!
Click to expand...
Click to collapse
Garmin XT is working fine on my Topaz, no problems with the built in GPS.
adigraham said:
Looks like garmin dont like built in gps? at least not what i tried!
Click to expand...
Click to collapse
I use Garmin XT - it works flawlessly and I'm very happy with it.
I was previously using Tomtom but had the voice command cut-off problem and the fix available here didn't fix it.
@ Garmin XT users,
I don't know that particular GPS software,
And have 2 questions about it,
1) Does it have Dutch voices?
2) Does it have a Belgium only map?
If you could answer these questions I would be very happy,
Cause iGo8 isn't the best there is either
jeutie said:
@ Garmin XT users,
I don't know that particular GPS software,
And have 2 questions about it,
1) Does it have Dutch voices?
2) Does it have a Belgium only map?
If you could answer these questions I would be very happy,
Cause iGo8 isn't the best there is either
Click to expand...
Click to collapse
Yes, the Netherlands is listed in the voice options. I don't think a Belgium only map is available. I have the Europe map with mine.
aww, thats sad, I only use a Belgian map, So I don't need all the others...
Well I'll look into it ;-)
Thanks for your reply!
*edit* It seems like they have Benelux maps... Which is Belgium Netherlands Luxembourg
Lets fire up that search engine x)

XXXXcouple of questionsXXXX

Thanks for replay
1-how to install a rom not from the offical website
2-what is the manilla
3-what is the radio ,does it updated with the rom or i have to update both
4-what is the best website for rom and radio ilike the rom look like the original
5-WHAT IS THE MEANING OF WM6.5.X WHAT IS THE X,I'M LOOKING FORWARD TO INSTALL WM6.5.3 LIKE THE HD MINI
6-can any one give me the url og\f how to install rom on sd card
7-and url of how to install android and how to boot 2 OS
hope you understand me cuz my english is not verygood
lol
thanks again
Ok i'll try to answer you the best i can although i am certainly no expert
SYRIAN4E said:
Thanks for replay
1-how to install a rom not from the offical website
Detailed post of how to do this is here http://forum.xda-developers.com/showthread.php?t=585201 however i suggest you also look in the ROMs section as well and see if you can find a ROM you like
2-what is the manilla
Manila in plain terms is a skin over the top of windows mobile to make everything more pleasant smoother and easier to run (this is also known as TF3D and Sense in the earlier ROMs)
3-what is the radio ,does it updated with the rom or i have to update both
The radio controls all your wireless running gprs etc this comes with the ROM . Never tried updating the radio alone so may or may not be possible
4-what is the best website for rom and radio ilike the rom look like the original
*might be wrong on this just going off what i've read*
All the ROMs in the forum are made from original (stock) ROMs which have then been tweaked to remove items that are not needed or wanted .. Add items in that are needed or wanted or to change the look and functionality of the original.
5-WHAT IS THE MEANING OF WM6.5.X WHAT IS THE X,I'M LOOKING FORWARD TO INSTALL WM6.5.3 LIKE THE HD MINI
WM6.5.X is a term to say will work on WM6.5.1 WM6.5.2 WM6.5.3 without having to list each one individually
6-can any one give me the url og\f how to install rom on sd card
See answer to question 1
7-and url of how to install android and how to boot 2 OS
All the Android info you seek can be found on the Android forum here http://forum.xda-developers.com/forumdisplay.php?f=623
hope you understand me cuz my english is not verygood
lol
thanks again
Click to expand...
Click to collapse
Hope that helps you out a bit
syrina
you ddn't help abit you help very much thanks alot
good luck for you
SYRIAN4E said:
you ddn't help abit you help very much thanks alot
good luck for you
Click to expand...
Click to collapse
You're very welcome

Categories

Resources