Backlight during calls - Touch Diamond, MDA Compact IV General

I just got the Compact IV (you seen my other post about memory...)
I just realised Im struggling with making calls to likes of T-Mobile. When the call starts the backlight goes off instantly! I need to press the round button to get the light back on to see the keypad to choose any key numbers... frustrating. As soon as I choose a number, the screen goes black again. I need to choose T-mobile like 4 diff numbers to get to someone to speak to... any help guys?

here ya go! enjoy

Related

Any Key Answer / Active screen

This one's got me stumped, I may just be overlooking a simple answer but it hasn't happened previously on my Magician or Vario before.
I carry my Vario III around in a large coat pocket for most of the time. I have a lot of appointments and calls which activate the screen when they occur. I then have the problem when fishing around for the device that a) I answer the call from touching the screen, b) End the call from touching the screen, c) Open a load of different apps where the appointments have made the screen go live and the movement in the pocket has brushed the screen.
All I want to do is use only the hardware buttons ie. Answer, End, Power button. Where can I find the settings for this? The "key settings" menu or "buttons" doesn't cover it so where is it? It's driving me mad!
Hold down the 'red' phone button to lock all but 'Power' and 'Unlock' soft key.
You can still answer a call as normal when it comes in with the with the 'green' phone key.
Thanks. I know about the standard lock, but then you're into multi key press territory to unlock it. I just wondered if someone knew of a way (or program) that once the screen was off it stayed off until the answer, reject or power button was pressed and then in the case of the power button the device returns to "normal".
I'm not sure if your idea would be very viable. The screen has to come on so that you can see who's calling!
Pretty pointless to reject a call when you don't know who it is.
I understand what you are trying to get at but wouidn't you still have the problem of not being able to use any other functions within a call like looking up a Contact or checking your Calendar. Hitting the Power button during a call to get back to normal use would be a bit 'hit n miss'.
Thanks for the reply. I agree it's not ideal and I guess if it was something everyone wanted someone would have brought a .CAB out for it. That my Q answered in any case. Thanks again.
Try searching the forum for 'S2U2'. It might be what you're looking for.
That should cover it just fine. Thanks for the pointer.
Nice one helterskelter
Didn't think he would want to open it to answer a call thats all as he seems to have big fingers and hit everything but 'Answer'
No, sorry, just my dark humour...
Hope you are sorted.

(Solved for diamond) How to disable fast dormant display during call?

I bought a Touch Diamond recently.
But I can't resolve a problem with the fast dormont display during call function.
I tried to modify the setting in the following path:
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL\EnableFastDormantDisplayDuringCall
I change the DWORD Data from 1 to 0.
But after a soft reset, I still have the problem that screen turns off quickly during calls.
It bothers me when I need to use the keypad during a call
to enter ext. number or to follow a vocal operation.
Does any one have the solution here?
Thanks a lot.
Craig Shih
My problem is now solved. Any one who needs the solution can go to post#19 and post#29.
But it needs more tests and feedbacks because I don't know how it works for other roms.
No body in the diamond forum knows how to solve this problem.
Maybe this is a very very difficult problem to solve.
No one knows how to sovle it until now.
Hope a real master comes to help us.
diamond bugs
yes it's really sad to have a expensive mobile without a support even the htc don't have a solution what kind of support we had ??? lucky us we had a website like XDA developer to help us tnx to the dude who put up all the tweaks and update....try to flash the euro rom it will solve the prob.blank screen during call...
as soon as phone call is received, just press on joystick centre button shortly. Display will not go off then. Simple enough.
if before you'll make the call ypu'll take out the stylus, it won't go off, and it will automatically start a note.this setting is in phone option last tab...
remember: it goes to sleep the moment you hold it against your ear (or your hand or anything in the front).
if you set the registry right it will stay on as long as you don't hold anything against the front.
pskint said:
automatically start a note.this setting is in phone option last tab...
Click to expand...
Click to collapse
that's an additional and necessary side effect since he only needs the display to stay on so he can use the keypad without pressing extra buttons.
SecureGSM said:
as soon as phone call is received, just press on joystick centre button shortly. Display will not go off then. Simple enough.
Click to expand...
Click to collapse
Thank you for your suggestion.
I tried this method and then the call will be on hold immediately
until I press the central button again.
But it surely keep the screen on during calls though I have to press the central button twice.
pskint said:
if before you'll make the call ypu'll take out the stylus, it won't go off, and it will automatically start a note.this setting is in phone option last tab...
Click to expand...
Click to collapse
Thank you for your suggestion.
It's a good functionality for diamond users.
But sometimes I want to use the keypad during calls rather than to make a note with stylus.
For example when we call for some credit card toll free service,
we might have to key in ext. numbers or ID numbers or card numbers etc.
pietrucci said:
remember: it goes to sleep the moment you hold it against your ear (or your hand or anything in the front).
if you set the registry right it will stay on as long as you don't hold anything against the front.
Click to expand...
Click to collapse
Could you explain the registry for us?
Err... personal view..
If there is a solution.. it would be great.. but just in case, there isn't :
I have gotten used to it.
now if it is to enter extension numbers or whatever.. I just start off by pushing the center dial once. The key pad is there.. I get on with entering the ext. number or the Account numbers..
Same call - next time I have to enter other details, hit the center thing again.. and the key pad is there..
It's not that much of a hassle.
Of course a solution would be great, but even if there isn't, one does get used to it, in time.
why do you want it to stay on.
i noticed that when it stays on during a call, my ear is opening programs.
which i really do not want.
if you need to use the phone during a conversation just press the on button.
L o r d R a j said:
Err... personal view..
If there is a solution.. it would be great.. but just in case, there isn't :
I have gotten used to it.
now if it is to enter extension numbers or whatever.. I just start off by pushing the center dial once. The key pad is there.. I get on with entering the ext. number or the Account numbers..
Same call - next time I have to enter other details, hit the center thing again.. and the key pad is there..
It's not that much of a hassle.
Of course a solution would be great, but even if there isn't, one does get used to it, in time.
Click to expand...
Click to collapse
You are right, it 's not a big deal.
Maybe it's only my preference with mobile phone or somebody else's.
But if we can choose which way to go, that would be better.
i think there is a slotion please try
got this one now and it looks like problem solve for me
Originally Posted by minkol
I suggest this too:
HKCU\ControlPanel\Backlight\LightSensorPollingEnab le to 0 (default 1)
During call the light sensor can also switch the backlight off. This setting will that disable.
This registry setting will disable your screen from turning off when making a call:
HKLM\ControlPanel\Backlight\LightSensorPollingEnable set to 0
It disables the lightsensor so it doesn't react when you're putting the phone next to your ear.
It worked for me, so I hope it will work for you as well.
motin said:
got this one now and it looks like problem solve for me
Originally Posted by minkol
I suggest this too:
HKCU\ControlPanel\Backlight\LightSensorPollingEnab le to 0 (default 1)
During call the light sensor can also switch the backlight off. This setting will that disable.
Click to expand...
Click to collapse
Thank you.
I 'll try it right away and see how it works.
motin said:
got this one now and it looks like problem solve for me
Originally Posted by minkol
I suggest this too:
HKCU\ControlPanel\Backlight\LightSensorPollingEnab le to 0 (default 1)
During call the light sensor can also switch the backlight off. This setting will that disable.
Click to expand...
Click to collapse
Hello. That registry entry solved that problem, but still after a few seconds the light turns off, even if I set it to turn off after 5 minutes in the Power settings. Is there any registry "tweak" to increase the backlight duration during a phone call?
craig_shih said:
Could you explain the registry for us?
Click to expand...
Click to collapse
Yes I can. Look at this post, point 8: http://forum.xda-developers.com/showpost.php?p=2278799&postcount=1
This regkey is also mentioned a few times in this thread.
See also point 17 of that post.
Done.
This is what I did
HKLM\Drivers\BuiltIn\RIL\BatteryTimeoutInCall set to 0
HKLM\Drivers\BuiltIn\RIL\BatterySuspendTimeoutInCall to 0
HKLM\Drivers\BuiltIn\RIL\EnableFastDormantDisplayDuringCall to 0
HKCU\ControlPanel\Phone Sleep to 0
HKCU\ControlPanel\Backlight\LightSensorPollingEnable to 0
That done..
Restart the phone (I waited for a minute or so)
Backlight remains on now.
Then, just for the hell of it.. went back into the registry and set back the default values for:
lightsensorpollingenable
Phone sleep
Fast dormant
Checked again.. still works.
If one or two people could confirm that this works, we could finally put a SOLVED thing to this nonsense and get it over with.

Couple of problems

I have a couple of anoying problems with the diamond. Its my first smart phone and there are som things I think the SonyEricsson handle better
First, whats up with the deal that Phone mode dissapears when you talk? When I´m calling some kind of support and need to press numbers thru the menu the phone locks after just about 5 secs and I have to go in to phone and keypad again, very anoying. Is their a way to keep in i phone mode to easy access to the keypad and ex speaker mode?
Second, the phone doesnt vibrate when it rings. When I choose vibrate-mode in the quick list it goes quite and vibrating, great for meetings. But I still want the phone to vibrate if I´m in a club or something
Third, Is there any way to shut down the function of the keypad appears automatically? When I go in the phone and wants to call I may have the number in the quick list but then I have to get the keypad away to see it. Isnt there a way to get it to appear only when I actually press the keypad button?
That was the first three questions, I suspects there will be plenty more after a while But I would appreciate any help I can get
claxx said:
I have a couple of anoying problems with the diamond. Its my first smart phone and there are som things I think the SonyEricsson handle better
Click to expand...
Click to collapse
those are not problems. those are you not reading diamond's manual or searching the forum. anyway:
First, whats up with the deal that Phone mode dissapears when you talk? When I´m calling some kind of support and need to press numbers thru the menu the phone locks after just about 5 secs and I have to go in to phone and keypad again, very anoying. Is their a way to keep in i phone mode to easy access to the keypad and ex speaker mode?
Click to expand...
Click to collapse
this is a feature not a bug and it is for you not to start any app with yr ear.
it can be override in many ways. one of them is using advance configuration 3.2. search! search!
Second, the phone doesnt vibrate when it rings. When I choose vibrate-mode in the quick list it goes quite and vibrating, great for meetings. But I still want the phone to vibrate if I´m in a club or something
Click to expand...
Click to collapse
try settings/phone/ring type/ vibrate and ring or vibrate the ring.
Third, Is there any way to shut down the function of the keypad appears automatically? When I go in the phone and wants to call I may have the number in the quick list but then I have to get the keypad away to see it. Isnt there a way to get it to appear only when I actually press the keypad button?
Click to expand...
Click to collapse
also can be changed. in phone mode go to menu/view/speed dial. this way when you call you'll get behind the phone pad yr speed dial. just push the little phone icon in the middle, lower screen and you'll have the speed dial only.
That was the first three questions, I suspects there will be plenty more after a while But I would appreciate any help I can get
Click to expand...
Click to collapse
i hope that next questions you are going to ask are going to be after you'll read the manual and a few threads here or you'll get ignored or worse...seriously flamed.
this is a feature not a bug and it is for you not to start any app with yr ear.
it can be override in many ways. one of them is using advance configuration 3.2. search! search!
I was told to put Phone sleep during call and fast sleep during call to Disable and Not Allowed in AC but the problems still remains.
also can be changed. in phone mode go to menu/view/speed dial. this way when you call you'll get behind the phone pad yr speed dial. just push the little phone icon in the middle, lower screen and you'll have the speed dial only.
I want to change the way the keypad acts. So its never appears automatically when the phone thinks I´m gonna use it, when I´m gonna write a SMS for example

Cannot dial a phone number, can only use contacts!

If I dial a number and press the connect button on my Diamond the call will not be put through.
I have to first save the number into my contacts and then browse my contacts and hit connect to make a call.
A friend of mine has the same problem on his S710 so I think this must be a setting thing rather than a problem thing with my Diamond.
Anyone got any ideas?
Thanks for the help!
I was having the same problem. Did you install AE button plus or another key mapper? This was what caused my problem when I remapped the green button single click to "phone" instead of "press green button".
Haven't installed any key mappers, came like this out of the box.
I sent the phone in for repairs last Friday. It was getting boiling hot on charge or GPS, then on Thursday nught the screen stopped working.
The guys at HTC say the main board and the screen bezel are both buggered and so the will replace the parts by Friday!
Thanks for your help though.

its hard to answer calls on hd7 when phone is acting up

hey guys sometime when i get and incoming call my phone start acting up and i cant slide up to take the call, my screen wont respond and no hard keys to press if some one know how to fix this please let me know if not im giving this wp7 a 2nd software update a chace to get this right. ms should be a genieus when it comes to software not apple or google. you never know when a emergency call comes in and you could not get it, im so concern about this. i had enough with 6.5 now this. but the problem is that i love ms i keep coming back. ****tttt
if a soft reset doesn't fix it you could hard reset. Just make sure you make a list of installed apps to make sure you get them all back on there.
I hadn't heard of this happening before.
I had the same problem once. I just switched the display off and on again (while the phone was still ringing) and then I could take the call.
chr5s11 said:
I had the same problem once. I just switched the display off and on again (while the phone was still ringing) and then I could take the call.
Click to expand...
Click to collapse
+1 this happens from time to time.
hit the POWER button to shut of screen, this just powers of the sound and display and does not efect the incoming call.
Press the POWER button to turn the screen back on where you still see the incoming call and the screen will now respond correctly allowing you to answer.
no need to rest or anything.
xma1e said:
+1 this happens from time to time.
hit the POWER button to shut of screen, this just powers of the sound and display and does not efect the incoming call.
Press the POWER button to turn the screen back on where you still see the incoming call and the screen will now respond correctly allowing you to answer.
no need to rest or anything.
Click to expand...
Click to collapse
+1 Me too.
Is there any remedy to this issue???, i'm having the same thing

Categories

Resources